Updates Fail For Windows 7?
Dec 21, 2012i am havin problems with my updates on windows 7 they get to 15% and fail and it restarts every time i try and update so it doesnt do any at all. its a laptop im on and using windows 7 ultimate
View 2 Replies
ADVERTISEMENT
Security Updates FAIL, Reattempt At Every Boot But Always FAIL?
Sep 16, 2012Since early August all my Security updates have been failing. It adds time to each boot up period as it goes through the updates and then at the end will say it's failed and is reverting all the changes. I have already done some research on this issue and ran "sfc/scannow" as well as "chkdsk/f/r." Both seemed to go through with no problems. After that I did a Windows update and 12 updates seemed to go through with no problem until the required reboot where we're back to the same issue of failing and reverting.
View 9 Replies View Related5 Updates Fail To Install Through Windows Updates Or Manual?
Oct 13, 2011I have 5 updates that fail to install. I have also tried to manually install them, but they still fail Here are the updates:
KB2586448
KB2572076
KB2564958
KB2567053
KB2579686
The error code I get is "800736B3". I ran MS FIXIT and it said they did not detect any problems.
Why Do Half Of Windows Updates Fail
Oct 2, 2011recently I've been noticing Windows 7 doesn't even automatically check all the updates it claims are important. Yes, I have it set to install Windows Updates automatically, but this would still prompt me to "start" the updates.I'm pretty sure it has something to do with my having Microsoft Office 2003 (the 2003 version of MS Word, Excel, PPT, etc.) but, that's not an excuse. They're prompting me to install updates for my software they're JUST releasing, and yet they fail seemingly almost every time? Do they even test the sh!t they release to the public?And how come sometimes they'll install if I manually do it myself as opposed to when I try doing it automatically? Why should it be any different?
View 3 Replies View RelatedWindows Updates Fail - Error Codes 80070643 And 8024200D
Nov 15, 2011I have had problems with failed Windows Updates for the past 3 months or so. I tried the windows update troubleshooter and it did not work. I tried to perform a clean boot and install the updates, it also did not work. I was able to successfully install a few updates to the .NET Framework by completely uninstalling it and then re-installing it (and double checking that it installed properly). At the moment I have 17 updates that fail to install and they pretty much all deal with microsoft office 2010. The only two not related to microsoft office are:
Update for Windows 7 (KB2545698)
Update for Windows 7 (KB2547666)
I don't know what else to do. I currently have Windows 7 Professional x64. I bought the computer in March of this year and have not made any major changes. The only updates I have are from Windows Updates and the last time they successfully installed (besides the .NET Framework I just fixed) was 21/10/11 and it was a hotfix for windows (KB2482122) problems really started around 19/07/2011 (more than a few updates failed).
Updates Fail To Configure?
Apr 29, 2011I recently downloaded and installed a set of Windows Updates that came out on 4/26. I had about 8 of them. 4 of them installed successfully but 4 of them were downloaded and installed(on shutdown) but fail to configure on startup. The four I'm having issues with are:
KB2492386
KB2515325
KB2522422
KB982018
Each of these are updates for Windows 64-bit. I was wondering if anyone else was having issues with these as well. I plan on waiting a day or two and try again. I've tried twice today with no success.For future reference, what can cause an update to fail to configure?
Office 2010 Updates Fail To Install?
Jan 22, 2012I was trying to install updates on my wife's computer for office 2010, when I received a message that updates failed. On going back to previous updates, I realized, that none of the updates had installed. I immediately checked to make sure the office setup exe file was enabled, and it was. Windows updates install just not office updates. (Amd 64 dual-core 6 gb ram 2 itb hdd. windows vista home premium 64-bit). What can I do to get these updates to install? Event viewer gives this output: Product: Microsoft Office Professional Plus 2010 -- Error 1606. Could not access network location %APPDATA%.I also got a error code:80070643. What do I need to do to get the updates to install?
View 1 Replies View RelatedInstall/uninstall Failing, Some MS Updates Fail
Aug 21, 2012Friends "out of the blue" my rock-solid-for-three-years windows 7 Ultimate x64 rig seems to have a permissions issue [I'm guessing]. I went to uninstall a program, and it failed. tried to install a program and it failed. Did windows updates, selected about 10 or so, most installed ok, but three failed. I created a new administrator-level account [the system has only had one in its history, the main/only I have ever used], tried to logon for the first time, and it failed.This system is on a LAN [wifi bridged AP] and is a Homegroup owner, but it is not on a Domain.
[code].....
Three Updates Fail To Install KB2737019, KB2729449 And KB2687623
Nov 19, 2012I am running Win.7 64 bit Home Prem. Those updates won't install. I have tried to download from the net and they still wouldn't install. I even tried The Fixit link.I tried to reload Net Framework 4 but I couldn't. It wouldn't uninstall or repair.
View 1 Replies View RelatedWindows 7 Boot Failure - Repair Fail, Memory Fail?
Oct 25, 2011I recently built a new rig and I had a problem with one stick of memory. The other stick worked alright, but I've been getting random failures. Can bad memory be inconsistent? Right now, I can't start my OS up at all. It goes straight to the Windows Repair Launcher, which fails. When it gets there, I can either find a restore point or let it 'attempt to fix' for as long as I can endure. The restore point option results in 'instruction xxx failed. memory reference xxx failed.'This leads me to believe there is a problem with the memory. But, could it be the motherboard? I played a video game for hours last night, as well as surfed the web and ran other applications. Everything was fine, until I shut down. This isn't the first time this happened. Last time, I 'fixed' it by switching the 'good' memory stick with the bad. The bad resulted in getting the OS up, but lots of BSOD's
View 7 Replies View RelatedWindows 7 Updates Same For Updates Every Time It Checks For Updates
Jun 19, 2012For the past day windows wants to install the same 4 updates over and over, I have windows update set to download and let me choose when to install.
I can't understand why I even need them, as I uninstalled net framework. Notice how the update at 8:17 AM., KB2656368, is the same as one of the 4 updates installed at 7:47 PM. Windows wants to install the same four kb files again.How do I stop this?
Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2656368)
Installation date: 6/15/2012 7:47 PM
Installation status: Successful
[Code].....
Windows-Updates Continues To Re-install Updates?
Jun 16, 2012Windows Updates continues to re-install five specific updates which are:*Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2604121) -Download size: 38.5 MB.*Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2656368) -Download size: 1.8 MB.*Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2656405) -Download size: 11.7 MB.*Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2686827) -Download size: 4.3 MB.*Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2600217) -Download size: 32.2 MB.- I purchased my computer 4 to 5 months ago. It is a Windows 7 Home Premium Hewlett-packard HP Pavilion dv6 Notebook PC (64-bit Operating System).
View 3 Replies View RelatedWindows 7 Updates Changes Settings To Never Check For Updates?
Oct 9, 2012For a while now I have been experiencing a strange problem. My laptop keeps changing the Windows Updates without my consent. I know this has been raised in the past but my problem is slightly different.I prefer to choose "Check for updates but let me choose whether to download or install them", however periodically the settings change without my consent to "Never check for updates".This is very frustrating as I am constantly having to keep an eye on this, and change the settings back to what they were in order to receive critical updates, or indeed any other update.The laptop was bought new just under 12 months ago and came with Windows 7 Home Premium 64Bit pre-installed.Has anyone else experienced this, or can anyone advise on a fix?
View 9 Replies View RelatedUnable To Connect To MSE To Get Updates Or To Windows 7 To Get Updates?
Feb 3, 2013My wifes computer has been acting up for about a week now. IE 8 is not loading properly and is crashing. I am unable to connect to MSE to get updates or to Windows to get updates. I have run Malwarebytes and Emsisoft and neither one can find a bug. Chrome works for a while and the she gets the AW SNAP message.
View 26 Replies View RelatedWindows 7 Updates Keeps Installing Same 8 Updates Over And Over
Aug 24, 2012I did search out this problem...very old posts recommended I start a new thread.For the last 2 weeks every time I shut down automatic install...installs the same 8 updates.
View 9 Replies View RelatedLatest Windows Updates Updates?
Oct 22, 2012for 72 hours now im geting constant updates on windows update,windows even re instaled SP1 ...story goes my hdd broke down 3 days ago so i installed on a new hd win 7 home prem. x64 +sp1, since that time i had at least 5 hours of updates (inc. setup),funny thing is a friend did format on his pc today and we spend 3 hours updating (dont think he finished, instead he went to sleep) My q is (as stated above) is there a reason for the 34/72/4/3/2/1/silverlight new updates found????? did Windows 7 went unstable???its rly anoying (got some failed updates to)until 3 days ago i had no probs.
View 4 Replies View RelatedWindows 7 Fail To Start?
Jun 24, 2011I just recently bought an Acer Aspire 5532 from a friend of mine. Everything was working fine for days, until I powered down using the power button rather than the shut down button on-screen. Ever since then, when I turn on the computer it reads "Windows failed to start. A recent hardware or software change might be the cause." I have the options to either 1. launch startup repair (which freezes the computer) or 2. Start windows normally (which takes me back to the start). I have no installation disk, I've tried safe mode (freezes) along with last good configuration?
View 2 Replies View RelatedWindows 7 SP1 C0000034 Fail
Apr 30, 2011Our laptop prompted a download and installation of SP1 Win7 and we pressed ok. The installation became stuck and warned do not shut down computer but it stayed in this state for over four hours. We had to "hard" boot the computer and on reboot it tried to install the new update. The system became stuck on " Fatal error C0000034 applying update operation 236 of 80331 (_000000...) " Then we started normally but the system identifies improper shutdown and runs system recovery (Lenovo) We choose "go to system recovery point" and after some time the system reboots and goes back to " Fatal error C0000034 applying update operation 236 of 80331 (_000000...).
View 3 Replies View RelatedWindows 7 Installation Fail?
Mar 26, 2011Yesterday i was listening music and my Windows Ultimate 32bit crashed, music started lagging. Then i restarted my computer and hes won't load the windows. Tryied do 3 times system restore but nothing helped. Tryied to install windows xp and then windows 7 again, but then i installed winXP i don't have internet connection, don't know why. then tryied install windows 7 but it's fails at middle of Completing installation progress then computer restart and i get hieroglif in the screen (picture above) and nothing happens. And then my computer is loading always in hieroglif. Maybe it's BIOS crashed?
View 1 Replies View RelatedWindows 7 Boot Fail
Nov 13, 2011I'll try to make sense of this to you. My computer has been working great until last night. Today, it bricked on me.Last night and until a out noon today, I was seeing occasional corruption of the image on screen (strange blocking/pixellation like a bad hd tv picture). I started getting locking-up freezes, which I could sort of unfreeze with ctrl-alt-del. This happened frequently while browsing the net las night (oddly games worked fine).Today at one point the whole image started flickering/fluctuating up and down and then the image scrambled totally and was locked-up, so I hard reset.Upon restart, bootup fails. Chkdsk, memory scan (from startup repAir and the installation disk), image and system recovery fail. When I read the detailed results from start up recovery, it tells me that no drive is present.So, did the drive fail, or maybe it came unplugged inside the tower (unlikely bc the tower hasnt moved). Or, did intel smart response technology screw up and the cache is screwed and it's messing up the primary drive it accelerates? Windows 7 64-bit OS on z68 mobo with 64gb SSd accelerating 500gb primary.
View 14 Replies View RelatedWindows 7 64 Bit SP1 Install Fail
Aug 20, 2011After reboot I get BSOD with 0x0000003B; 0xC0000000C0000005; 0xFFFFF8801893FA1; 0x0000000000000000; and TCPIP errors. Using system retore in safe mode has broken Net Framework 2 with error message unable to load sorttbls.nip or one of its dependancies. ATI Catalyst Control Centre and windows troubleshooter no longer work.
View 1 Replies View RelatedWhy Did Windows 7 Boot Fail
Jul 19, 2009Recently I just tried starting my computer on and it wouldn't boot. I left my computer in locked mode then it eventually went to sleep. I kept trying to restart it and had no luck, I checked inside the cpu was running and the dvd drive was still able to open and close. My USB mouse or keyboard weren't powering on though neither was my monitor showing anything I didn't hear any beeps. So I kept disconnecting the power outlet from the wall since that's the only way I could restart it.
View 9 Replies View RelatedWindows 7 Installation Fail
Mar 26, 2011Yesterday i was listening music and my Windows Ultimate 32bit crashed, music started lagging. Then i restarted my computer and hes won't load the windows. Tryied do 3 times system restore but nothing helped. Tryied to install windows xp and then windows 7 again, but then i installed winXP i don't have internet connection, don't know why. then tryied install windows 7 but it's fails at middle of Completing installation progress then computer restart and i get hieroglif in the screen (picture above) and nothing happens. And then my computer is loading always in hieroglif. Maybe it's BIOS crashed?
View 3 Replies View RelatedWindows Virtual PC Fail?
Aug 17, 2011I wanted to setup a VPC starting with an image of my laptop but I'm having great difficultly, I'm running Windows 7 home premium x64.I started by using Acronis true image to take an image of my PC (a .tib). I then used Acronis true image to convert that to a vhd, however when trying to create a VPC using the vhd got a message that the vhd could not be attached. After some research I found that it was because the partition I imaged was 320GB and Windows Virtual PC could not handle it. Using diskpart I reduced the vhd partition size then using Vhd resizer to reduce the size. I was able to attach the vhd and start the virtual machine but received a message from Windows Boot Manager "The boot selection failed because a required device is inaccessible", so I inserted the Windows home premium x64 DVD into the dvd drive but the virtual machine would not boot from it.
I could not do anything so I decided to start a new virtual machine and try and install windows from scratch. I created a fixed sized vhd using Windows Virtual PC, I inserted the Windows DVD into the drive and booted the virtual machine. This time virtual PC would allow me to boot from the DVD drive however I receive an error "Attempting to load a 64-bit application, however this CPU is not compatible with 64-bit mode" but this is the version of Windows I am running on my PC.I have also downloaded Securable to ensure that Windows Virtual PC will work I get a maximum bit length of 64 and Yes for both hardware D.E.P and Hardware Virtualization.
Fail To Boot Up Windows 7
Oct 10, 2011So what happened was yesterday AVG detected a virus on my computer and asked if I wanted to get rid of it. I clicked remove or whatever it was and forgot about it. However, every 2-3 minutes it mentioned another virus needed removal on my computer. I ran a scan twice and said it was clean.
So I thought about trying to use a different antivirus program. I downloaded MSE and ran a scan. It detected some kind of trojan virus so I removed it and was glad thinking that this was the hidden problem. MSE told me to restart the computer to finish the clean up or whatnot, so I restarted the computer.
However, now when my computer is loading, I'll reach the first Windows 7 screen showing the symbol, then my computer will automatically restart. As if I clicked the reset button. I tried using the startup repair but it could not fix the problem. I also tried the restore windows at a earlier point, but the computer still faills to reach the desktop. I read somewhere that I should try to access the desktop in safemode, but the same "reset" problem occurs when I try to make it to safemode.
Please if anyone could help me fix this problem I would greatly appreciate it. I did not delete AVG so I had 2 antivirus programs (AVG and MSE), and someone told me that could be the problem and to delete 1 of the antivirus programs, but I cant even get to the desktop to do so. I have windows 7 64-bit. Prior to this, the computer was working fine. I was thinking of reformatting the computer but I rather not lose everything I have on the computer unless its the only option left.
Windows 7 Installation Fail
Nov 12, 2012I have AMD X2 4600+M2N68 AM SE + 2gb Trancend 667 Mhz Ram.I am unable to install any version of win 7 on this config..Should anyone will guide in this problem?
View 3 Replies View RelatedWindows 7 Startup Repair Fail
Aug 13, 2011Usually I can resolve most issues myself but this one appears to have stumped me so I am graciously turning to you in my time of need.I am unable to boot Windows 7 on my Acer Ferrari One F0200 netbook. It has Windows 7 home premium 64-bit installed but due to an unknown problem or possibly persistent virus I have been unable to boot into windows.
below is a list of things i've tried up til now:
Tried to boot in all safe mode options (failed)
Tried to boot from last known good configuration(failed)
Tried to system restore from all available restore points (failed)
Tried multiple Startup Repairs(all failed)
"Startup Repair cannot repair this computer automatically"
Problem signature:
Problem event name: StartupRepairOffline
Problem signature 01 : 6.1.7600.16385
Problem signature 02 : 6.1.7600.16385
Problem signature 03 : unknown
[code]....
while writing this I managed to get a blue screen message(disabled the option to automatically restart on system failure) which had been flashing for a nano second previously.A problem has been detected and Windows has been shut down to prevent damage to your computer. it says to check for viruses on your computer remove any newly installed hard drives or hard drive controllers. check your hard drive to make sure it is properly configured and terminated. Run chkdsk /f to check for hard drive corruption, and then restart your computer.I had already ran the chkdsk /f before I saw this message and no files were corrupted/no bad sectors. So this is where I'm at, at my wits end hoping that I dont lose all my data.
Windows 7 Fail To Start After Update?
Jul 9, 2011I am running windows 7 32-bit and a few days ago I installed a windows update. When my computer restarted it entered the loading screen, but then the screen went black and after failing to load windows, gave me the option to start system repair. I did, and was subsequently able to run system restore, which took me back to before the update and my computer started normally again. I turned off automatic updating, but today when I restarted my pc the update installed again. Tried running startup repair, but there is no more option to enter system restore. When startup repair finishes, it says it can't automatically fix the problem. Upon entering advance restore options and selecting system restore, it indicates that the specified action could not be located and in any other instance says that system restore is offline.
View 2 Replies View RelatedWindows 7 Update Reinstall Fail?
Mar 8, 2011I've recently been directed here from the Malware forum . I am having corrupted files which now are malware-free and I tried to do a upgrade reinstall to my system . However , at the final stage where my files are being transferred back, the updates fail and my windows is rolled back .Could someone please help me on how to solve this? I would like to reinstall windows 7 without losing my data .I am holding the Windows 7 Ultimate 32bit Upgrade CD which I've got from the Dell Upgrade program.I've uploaded the windows compatibility report ( it was the report i found on the desktop after the failed install)
View 14 Replies View RelatedTouchpad Fail After MS Windows 7 Update
Jan 12, 2012Lastnight upon shut down, my laptop had updates to deal with so I went to sleep. I fired it up this morn and it did what ever it does with those updates... Since then I have nad no touch pad. I tried the Fn/F9 and that was not it... so I checked in control panel etc... Got to the screen where I check/uncheck "disable for external device" or similar wording... Couldn't check/uncheck as it was not highlighted/activated... windo in that box was blank not showing a device at all...
View 2 Replies View RelatedWhy Windows 7 Fail To Repair Automatically
Jul 14, 2012i am using lenovo i3..this one is o new but its not working,says windows cannot start and tries itself to repair but i dont get any slution..
View 1 Replies View Related