I have an Asus laptop with Windows 7 and a netgear N600 router and I can't connect to it or any Netgear networks. I can connect to other networks and others can connect to my network and all other devices work except my laptop.
But I cannot get my NEW Netgear N600 router to communicate with a NEW Netgear WN 3000 RP extender.The instructions say to press the WPS button on the extender then the WPS button on the router. No WPS button exists on the router!The instructions also I can use any wireless network manager utility to set this up. Can't find where this is in Windows 7.The I pad has found the NETGEAR_EXT address but won't connect. And the light on the extender does no indicate teh router is communicating with it.
I have a netgear wireless router upstairs. My dell laptop, my iMac (which is downstairs) and my iPad/iPhones all connect anywhere in the house. My Toshiba laptop and my work dell will not connect or it connects very intermittently. I can stay connected for days on other wifi networks, just not at home. Any ideas?
why do i have to place my laptop very near to the wireless router in order to get the signal? Please help. Will this be driver related issue? or the wireless hardware inside of my laptop? Because i remember i drop the laptop once.I have another laptop, where it is able to detect the wireless rounter from far?
Not my week so far yet another problem. Been trying all day to connect to the internet with the above router.Happened accross a screen saying Firewall settings.It says for the inbound services "BLOCK always" is this my problem?I have tried to amend this to " ALLOW always" to which the outbound services are already set.My next problem is it is asking for the inbound services to be adjusted so I have setthe service parameter to ALL, action ALLOW always but now is the problem it wants an address putting into the 4 boxes for the Send to LAN Server parameter,I have tried various setting but to no avail. Exactly where can I get this information from?
i have a samsung laptop running windows 7. i have a netgear modem and router. all of my other devices connect with no problems but my laptop wont stay connected. it will connect for a while and then it will disconnect.
setup two routers (Netgear N600 routers)? In House A (My Barn) I have 3 camera's hook up to my router. In House B (My House), I have a N600 hookup to my modem and 3 of my computers. What would it take to be able to hook up House A to House B, so that I can view my House A camera's?
I just installed the Windows 7 upgrade. My printer would not print so I called Dell. I was on the phone with them for 3 hours trying to get it to print. They eventually told me that my wireless router, (Netgear WNR2000) had a wrong IP address of 168. something. They told me I had to change it to a 192. number. They further told me to change to WEP. I went to the wireless site and typed in 192.168.1.1 and logged in. I changed it to WEP but then the internet would not work. I do not know what to do. Can someone please help me?
I am having trouble connecting my girlfriends laptop to the internet using her Windows 7 laptop via a Dlink router with Virgin Media. The laptop previously had Windows Vista installed but I recently upgraded it to Windows 7. For about 2 weeks the laptop connected to the wireless router fine, but stopped working about 4 days ago for some unknown reason out of the blue.
We have tried various methods to fix it, including disabling the wireless network adapter and enabling it again, we have tried updating the driver for the adapter but we get a message saying that the driver currently installed is the latest driver. It also won't let me roll back to the previous driver as that option is faded out in the properties box.
I have took her laptop to my house today to try and connect it to my router (which is also with Virgin and is working fine on my computers at my house) and the laptop won't let me connect to the network and it keeps saying there are no network connections available. I understand that usually it displays a list of connections you can log on to, but the laptop is not finding any connections at all.
On Thursday we attempted to connect to the internet by plugging in the blue wire that came with the router and that works fine. It's just it will not connect wirelessly. What really baffles us with this problem is that it worked fine for a couple of weeks then suddenly stopped working. Could it be an update that was installed that has caused the problem perhaps?
I have also tried using System Restore but that hasn't fixed the problem either. The wireless adapter is called: Atheros AR5005G Wirelss Network Adapter.
What are my options for connecting a laptop wirelessly to a workstation that is connected to a wired LAN and has no router?Essentially, I want to add wireless connectivity to the workstation so that the laptop can connect to the wired LAN via the workstation.
Windows 7 laptop will connect to the wireless router but no internet access. The MAC in my house as well as the xbox both have internet via the wireless router. I just altered my internet by making it password protected and changed the name (SSID) Is this the problem?
I am trying to set up WPA security on my new Dell Inspiron Laptop,When I go to "Help and Support" for instructions it says:"The Set Up a Network wizard will guide you through setting up a security key.Click to open Set Up a Network."My problem is when I "Click to open Set up a Network" it only shows my neighbor's router [A Linksys WRT110]. My Netgear WGR614v6 does not show up as an option to connect to.
My Dell Studio 15 laptop cannot connect to my home wireless router, by can connect to neighbor's or my friends's or hotels's wireless network. My IPad and another two Dell Inspiron 17 laptops can connect my home wireless router without problems.
why one of my laptop suddenly has no internet access.no matter what I tried its still does not connet.It is show that its connecting to my main network but it said no internet access.
My Netgear Wireless-G WGR61v10 router has suddenly stopped doing its thing. No changes were made to it, and it's not that old - maybe a year and a half. Short enough to not think its gone bad and long enough to stop getting free Netgear support.I rebooted everything after pulling the power, first from the cable modem, then the router, then the computer, but no change. Neither my laptop or desktop will get online through the router, even when directly connected. I can ping the router, however.
I have a Netgear DGNB2100 Wireless N router. It is connected to an old PC via Ethernet cable. That connection works.
While downloading a 64 bit driver to use for the USB adapter for my PC, I connected my laptop to the wireless network with the laptops WiFi card (Intel PRO/Wireless 3945ABG), and used the internet for about ten minutes.
I then configured the USB adapter for my PC, after disconnecting the laptop.
My laptop will detect the network, but when I put in the password, I get a message saying Network Security Key Mismatch, and am prompted to type the key in again.
I have also tried pressing the WPS button on the router instead of typing in the password with no luck.
The laptop is an Acer Aspire 5920, with the aforementioned Intel PRO/Wireless 3945ABG network card, and it is running Windows 7 Professional 32 bit.
I am using a netgear DG834GT router however having just bought a computer running on windows 7 I am having real connectivity problems, other laptops in the household are on XP and have no problem, is there an answer out there?
I am trying to configure a Netgear WNR3500 router to be used as an access point.My AT&T U-Verse Gateway router is in the basement of my house and the WNR3500 is in my office on the second floor of my house. I am using the Netgear Knowledge Base article ID 19852 titled "Set Up a Wireless Router as an Access Point on a Network".In Step 5 is says in Advanced tab Setup > LAN "In the IP Address field, change the LAN IP address of the router (WNR3500) to 192.168.1.100 (same IP segment of the main (AT&T) router (192.168.1.1) and uncheck the DHCP server box.I did that and the wireless access point doesn't work.The AT&T Gateway wireless router IP address is 192.168.1.254. I also tried changing the WNR3500 LAN IP address to 192.168.1.200 and the access point still doesn't work.
I have Windows 7 64 bit. I bought a Netgear DGN2000 approximately two years ago. It is working well. Currently, there is good connectivity between my laptop and the modem/router (wired and wireless).
I worked on my desktop this morning, uninstalled some programmes, but must have uninstalled a driver or something. I inserted the Resource CD, which installs the modem (although it is installed). Then it stalls at some point. If I troubleshoot, it states Windows do not detect a properly installed network adaptor.