My Netgear Wireless-G WGR61v10 router has suddenly stopped doing its thing. No changes were made to it, and it's not that old - maybe a year and a half. Short enough to not think its gone bad and long enough to stop getting free Netgear support.I rebooted everything after pulling the power, first from the cable modem, then the router, then the computer, but no change. Neither my laptop or desktop will get online through the router, even when directly connected. I can ping the router, however.
But I cannot get my NEW Netgear N600 router to communicate with a NEW Netgear WN 3000 RP extender.The instructions say to press the WPS button on the extender then the WPS button on the router. No WPS button exists on the router!The instructions also I can use any wireless network manager utility to set this up. Can't find where this is in Windows 7.The I pad has found the NETGEAR_EXT address but won't connect. And the light on the extender does no indicate teh router is communicating with it.
Last night my router was working fine, and then all of a sudden my Internet stopped working. when i woke up i figured out that with a Ethernet cord the Internet works, but going wireless doesn't work. its not in my computer since it also wont work on my ps3.
When i try to connect to it, it either says it cannot connect, or connects and says i have Internet but doesn't let me actually load anything.
My Netgear WGR614 Router stopped working on wireless the other day. Still worked fine..Ok so I bought a new Netgear WNR3500L yesterday. Set up was easy and I thought all was well. My computer for some reason called it a new network and named it network 3.The crazy thing is some internet sites will not load. My Hotmail which I access through Windows live mail will not load.( but my normal email works fine). nor will it load going straight to Hotmail ....any site that I have to logo onto will not go any further that the log in page. It's like something is blocking certain sites. Yes, I turned off the fire wall and my anti virus and still the same. My laptop however connected by wireless to the new router, will work perfectly which tells me the router is fine.I reset up the old router(which now the wireless works) and all is well. My computer calls and did call before all of this just plain network!
I just installed the Windows 7 upgrade. My printer would not print so I called Dell. I was on the phone with them for 3 hours trying to get it to print. They eventually told me that my wireless router, (Netgear WNR2000) had a wrong IP address of 168. something. They told me I had to change it to a 192. number. They further told me to change to WEP. I went to the wireless site and typed in 192.168.1.1 and logged in. I changed it to WEP but then the internet would not work. I do not know what to do. Can someone please help me?
I am trying to set up WPA security on my new Dell Inspiron Laptop,When I go to "Help and Support" for instructions it says:"The Set Up a Network wizard will guide you through setting up a security key.Click to open Set Up a Network."My problem is when I "Click to open Set up a Network" it only shows my neighbor's router [A Linksys WRT110]. My Netgear WGR614v6 does not show up as an option to connect to.
I have a Netgear DGNB2100 Wireless N router. It is connected to an old PC via Ethernet cable. That connection works.
While downloading a 64 bit driver to use for the USB adapter for my PC, I connected my laptop to the wireless network with the laptops WiFi card (Intel PRO/Wireless 3945ABG), and used the internet for about ten minutes.
I then configured the USB adapter for my PC, after disconnecting the laptop.
My laptop will detect the network, but when I put in the password, I get a message saying Network Security Key Mismatch, and am prompted to type the key in again.
I have also tried pressing the WPS button on the router instead of typing in the password with no luck.
The laptop is an Acer Aspire 5920, with the aforementioned Intel PRO/Wireless 3945ABG network card, and it is running Windows 7 Professional 32 bit.
I am using a netgear DG834GT router however having just bought a computer running on windows 7 I am having real connectivity problems, other laptops in the household are on XP and have no problem, is there an answer out there?
Not my week so far yet another problem. Been trying all day to connect to the internet with the above router.Happened accross a screen saying Firewall settings.It says for the inbound services "BLOCK always" is this my problem?I have tried to amend this to " ALLOW always" to which the outbound services are already set.My next problem is it is asking for the inbound services to be adjusted so I have setthe service parameter to ALL, action ALLOW always but now is the problem it wants an address putting into the 4 boxes for the Send to LAN Server parameter,I have tried various setting but to no avail. Exactly where can I get this information from?
I am trying to configure a Netgear WNR3500 router to be used as an access point.My AT&T U-Verse Gateway router is in the basement of my house and the WNR3500 is in my office on the second floor of my house. I am using the Netgear Knowledge Base article ID 19852 titled "Set Up a Wireless Router as an Access Point on a Network".In Step 5 is says in Advanced tab Setup > LAN "In the IP Address field, change the LAN IP address of the router (WNR3500) to 192.168.1.100 (same IP segment of the main (AT&T) router (192.168.1.1) and uncheck the DHCP server box.I did that and the wireless access point doesn't work.The AT&T Gateway wireless router IP address is 192.168.1.254. I also tried changing the WNR3500 LAN IP address to 192.168.1.200 and the access point still doesn't work.
i have a samsung laptop running windows 7. i have a netgear modem and router. all of my other devices connect with no problems but my laptop wont stay connected. it will connect for a while and then it will disconnect.
I have an Asus laptop with Windows 7 and a netgear N600 router and I can't connect to it or any Netgear networks. I can connect to other networks and others can connect to my network and all other devices work except my laptop.
I have a netgear wireless router upstairs. My dell laptop, my iMac (which is downstairs) and my iPad/iPhones all connect anywhere in the house. My Toshiba laptop and my work dell will not connect or it connects very intermittently. I can stay connected for days on other wifi networks, just not at home. Any ideas?
I just bought a Netgear WNA3100 wireless usb adapter for my HP Win 7 64 bit laptop. I have been trying for 2 and half days to figure out why my speed is slow, why i don't have a good signal, and/ or if I do have a bit of a signal to my luck, why my signal comes and goes. I don't have internet at home at the moment because I am trying to save up to go to school. I am picking up a public business signal from a block away (which I have asked for permission to use), but I only am receiving not much of a signal with the Netgear usb wireless adapter.
my wireless was connected to my laptop and was working fine untill the other day the wifi and the wps light went off i have try'd pushing the buttons to turn it back on again but it did not come on and it is still not working. The power/test light is blinking green and the internet light is on at green but not blinking I have disabled and then enabled my wirless router and still no wifi
I've upgraded my PC to Windows 7 Home Premium today (from Win XP Pro) and now the wireless network adapter does not work.
The adapter is a Netgear WG331 v1. I've tried downloading the drivers from the Netgear site - both those for the v1 and the newer drivers for the v3 and neither have fixed the issue.
I've used the Win 7 troubleshoot feature to install this driver (it is meant to be included within Win 7) but this does not work either.
I've also tried plugging the ethernet cable that normally goes directly into the back of my Netgear router into the PC, in order to provide Win 7 with internet access. However, this has not worked, with the connection apparently not recognised by the computer. I've tried to update the drivers for my PC's motherboard to remedy this, but have been unable to find any that are compatible with this version of Windows. The motherboard is MSI n1996.
Windows 7 troubleshooter shows missing drivers for the following: Multimedia Audio Controller (two of these), PCI Input Device, Ethernet Controller.
What I'm banking on is that an internet connection will enable Win 7 to locate drivers for all of these, but I am currently unable to make this happen. The internet connection is running fine and the wireless router is broadcasting the signal properly (I am accessing it right now via my laptop).
My wireless adapter shows that it is connected to my network, but my computer cannot connect to the internet. All other computers can still connect to the internet. It worked fine for almost a year, then one day...no connection.I use Windows 7, Home Premium, 64-bit; engenius wireless adapter and Linksys router. I tried to change to a TP-Link router, but my adapter (or computer) couldn't find it, so I switched back to the Linksys.Tried re-installing wireless adapter, linksys, tp-link; re-sets to both routers; uninstalling software, then re-installing;
Recently my computer has been force closing applications like Photoshop and Windows Explorer. It usually happens when I right click in Explorer or try to open anything in Photoshop. When it happens, a dialogue box comes up that says "Windows Explorer has stopped working" or "Adobe Photoshop has stopped working" Under the details it displays this information:
Problem signature: Problem Event Name:APPCRASH Application Name:Explorer.EXE Application Version:6.1.7600.16768 Application Timestamp:4d688122
I have an Acer laptop running Windows 7 SP1 64bit. Worked fine until last week. Now will not connect to router.Network centre says ;no internet connection' and 'unidentified network , public network This happens both via wifi and cable connection.I have another router on another line. Same failure messages when I connect the laptop ( wifi and cable)I also have a PC running Windows 7.Connects perfectly to both routers via either method.I an running 'Bullguard' have disabled - no affect.
Wifi on my laptop suddenly stopped working. It has full bars but I cannot access any websites in any browser (Chrome/Firefox). I also cannot access itunes store. I keep seeing a yellow exclamation mark appear on my wifi signal then it vanishes by itself.
The USB's stopped working on my PC. I recently purchased it about a month ago and I think something was installed or was added to the computer because it stopped working all of a sudden.
Tech Support Guy System Info Utility version 1.0.0.1 OS Version: Microsoft Windows 7 Home Premium , 64 bit Processor: AMD Phenom(tm) II X4 955 Processor, AMD64 Family 16 Model 4 Stepping 3 Processor Count: 4 RAM: 7935 Mb Graphics Card: LogMeIn Mirror Driver, 7 Mb Hard Drives: C: Total - 1377472 MB, Free - 1149795 MB; D: Total - 13223 MB, Free - 1625 MB; M: Total - 39989 MB, Free - 39898 MB; Motherboard: FOXCONN, 2AB1 , 1.00, Antivirus: Lavasoft Ad-Watch Live! Anti-Virus, Updated and Enabled
For nearly half of the .exe files I attempt to open, I get this stupid "---.exe has stopped working" (where --- represents the name of the file). The files I'm trying to open are not video game files, but rather program files.I am currently working on a 64-bit system. I have only had this machine for 2.5 weeks.
I left my Dell laptop running a Sophos anti-rootkit scan overnight. This morning I found six extra windows open, which looked like this: [code] which looks like six randomly generated letters for the application name. I'm not sure if this is anything to do with the rootkit scan I was running, but I'm a bit concerned by it. Does anyone have any ideas about this? I'm running Windows 7 Prof 64.
So i start the game up fine, single player works fine for abit, then when i want to play multiplayer as soon as the game starts and i move it will send me back to desktop with the windows message 'GTA IV has stopped working'It has been fine past couple of months.
My specs if it helps define problems etc:
AMD FX-4100 3.6Ghz Windows 7 64bit 4GB RAM 1600 1GB HD 7770 OC
cd dvd rom just stopped working. I have ran all kinds of scans. no viruses. windows 7 laptop.. says device working properly but windows did not start related device driver.