I'm looking into a relative's PC running Windows 7 Home Premium and it's giving me quite a lot of errors.I can't say exactly what the problem is, but several messages/errors led me to believe that a system repair of corrupt/missing files was in order:- Example 1: Control Panel >> Programs >> Turn Windows features on or off: The system could not find the environment option that was entered. Same error comes up when I try to run CMD as Administrator. - Example 2: Opening pictures with Windows' default picture viewer produced an error. This led me to believe that maybe just the picture viewer was corrupt, but then I saw WMP wouldn't run either, and different system options wouldn't work (as in Ex. 1).
I looked around and found that the appropriate files actually did exists, but still wouldn't run for some reason (e.g. WMP, Picture Viewer, etc.)So I decided to run "sfc /scannow" which, at first, just popped up and then immediately closed. Then I tried running it from the Windows 7 installation DVD, via Safe Mode, and via other accounts. In most cases, it said it was starting and that "This will take some time", and a few seconds later "Windows Resource Protection could not perform the requested operation".I also tried "sfc /scannow /offbootdir=c: /offwindir=c:windows" and the same via the installation DVD, in which case I used "sfc /scannow /offbootdir=d: /offwindir=d:windows" instead.I Googled a lot and nothing seems to work. I'd really like to restore this system back into working condition without losing any personal data. Yes, I've already backed it up.
I had Windows Vista and I upgraded using the 'clean install' to Windows 7. I had been experiencing BSODs (blue screen of death) and I thought a re-install, or an upgrade would solve those issues. However, I continue getting those BSODs now with Windows 7 as well.I can't quite recall the stop errors and names, but they were mostly IRQL_NOT_LESS_OR_EQUAL. I also had 'memory management' sometimes.Recently I powered on my computer and realized everything was running slowly, and I've noticed the BSODs have stopped. I ran everything, anti- malware, virus, spyware programs and they found nothing. I ran memory diagnostics and it came up with nothing. There's nothing really on this computer to be slowing it down since I haven't fully replaced all my files and it's a new OS.The only thing that found anything out of place was after running SFC /scannow, the CBS.log file says this in several places:
[code]...
What I could understand from that is it's saying that a file, called msdrm.dll.mui, is corrupt. Apparently it's in the 'en-US' folder (assuming). It also says on the last line, 'file is missing'.Now, I've replaced from the actual Windows 7 installation CD, the file msdrm.dll.mui in the en-US folder, and in another folder that had the same file. After restarting, the computer still runs sluggishly.My question is, why would the system file still be corrupt even after replacing it from the installation CD? The CD is fine, no scratches or anything like that, and it's virtually new.Also, could my system be missing something that the file msdrm.dll.mui needs to function properly? (I ask this because it says 'file missing') What can I do about this system file to fix it?Note: I looked up the system file msdrm.dll.mui and I read that it's needed for system performance (and performance right now is my issue so I'm guessing this is what's making my computer run slugglishly).
My daughter has a Gateway laptop running Windows 7 Home Premium 64bit. We have 4gig RAM installed.The other day she tried to create a folder on the desktop. However, she was not able to do that and was also not able to click on any icon on the desktop at all.She restarted the computer and it seemed to fix itself. However, the next day it happened again.Does this sound like a corrupt system file or a virus? We have PC Tools Internet Security on her laptop and it says there are no viruses.Also, not sure if this is related, but the computer takes over 15 minutes to shut down. Actually, I don't know exactly how long it takes because after 15 minutes she gets frustrated and just holds down the power button to force it to shut down.There are no updates available - we have checked and it says there are none.
Corrupt files in System File Checker - now whaIn trying to fix a still unsolved problem with my WLAN network connection (detailed here, if relevant: WLAN issue - WiFi can't connect - Tech Support Guy Forums), it was concluded that a main problem is corrupt files identified by the System Files checker.This is the message I get when running the checker toold corrupt files but was unable to fix some of them Checking the log, I searched for cannot repai but nothing comes up. Searching for in the logs turns up some cases of annot verify component files for Microsoft-Windows-Security-Kerberoarch for turns up nothing. Not sure what to do now. My computer is a Dell XPS 15 Z
I tried to use the recovery 7 disk on my laptop...Half way through the process my laptop froze and shut off. When I turned it back on its said winload.exe was missing or corrupt. With the status of 0xc000000f. It wont let me do anything with the computer. Only go into memory tool diagnostics and the setup utility. It says to install the windows 7 install disks. I dont have that I only have the recovery disks.
I am using Windows 7 Professional SP1 32 bit on a desktop machine. I run ESET NOD32 Anti-virus 5.0 and Comodo Free Firewall in the background. I do a weekly manual scan with Malwarebytes Anti-Malware and Super AntiSpyware. Malwarebytes has never detected a threat and Super AntiSpyware detects about 130 threats each week. My start up folder has 5 programs that start up and run in the background. Recently the machine has become very sluggish, some programs take a very long time to open and when I am using various programs they sometimes stop responding but sometimes they recover by themselves if I wait long enough.A couple of days ago I ran sfc /scannow from an elevated command prompt. After it ran it said that it could not fix several corrupted Windows files. I looked in the log file and I didn't understand what I was reading and I couldn't tell which files were corrupt or how to fix them. I ran sfc /scannow a total of 3 times rebooting after each time and each time it told me it could not fix several corrupted Windows files.
I was surprised that when I ran sfc /scannow that it did not ask me to insert the Windows 7 installation CD so it could replace the corrupted files. When I would run sfc /scannow on my Windows XP Pro machines I always had to insert the XP installation CD so it could copy files from the CD into the machine.Today I booted the machine with the Windows install CD and selected "Repair". The "System Recovery Options" screen appeared. My choices were:
- Startup repair - System restore to an earlier point in time - System image recovery - Windows memory diagnostics - Command prompt
The machine starts up OK so there were no choices that apply to repairing Windows. When I was running XP Pro the system disk would actually do a repair action.I am thinking that the cause of the sluggish, some programs taking a very long time to open and various programs sometimes stop responding may be caused because of the corrupt Windows file sfc /scannow couldn't fix.Is there a way to replace the corrupt Windows 7 corrupt files that sfc /scannow says it cannot fix? The other option is to do a complete clean install of Windows from scratch. Not too much fun as I will have re-install all of my software and re-option everything.
Windows Corrupt Backup Files Software by Windows Corrupt Backup Files Software - Review and download and how safe is it to use to salvage corrupt system files?
just moved my uncles HDD to a SSD i finally got it to boot no problem andeverything seems to be back to normal but a new issue has come up.every 5th or 6th time i reboot it gives me the BOOTMGR image is corrupt. The system cannot boot error then after i restart go into the BIOS go save to CMOS the system boots as if nothing happened. so far i have tried: run startup repair run bootrec.exe /fixmbr /fixboot and fix bcd commands x4 strangely it says everything is completed but shows 0 indows installs.reinstalled Win 7 no virues no spyware I'm thinking of maybe changing the CMOS battery.
I just built a new computer and I installed windows 7 and it worked fine all day.I shut it down the next morning before going to work and when i got home later i got tons of messages about processes not working and system files being corrupted. It wouldnt even stay turned on for long. I later reformatted and installed windows xp, it worked fine all weekend but when i turned it off before going to work on monday and came home later i got the same problem.I did several restarts while it was working and nothing bad happened, but when it was off for a long period it screwed it up on both operating systems.
I have a toshiba with a windows 7 64bit, and it's been acting really slow recently and freezing up on me so I thought there might be viruses that I needed to get rid of, so I restarted my computer so I could go in safe mode with networking to check if there really were. When I restarted my computer I momentarily forgot to press the f8 key and the windows starting screen with the logo showed up. Without thinking I turned off my computer since I didn't want to restart again (it took forever for the computer to do). Once I turned the laptop on again I ended up going to system repair. For some reason this did nothing to my computer. I left it on for hours and hours until I finally decided I wasn't going to get any results. I once again restarted the laptop but this time when I went to system repair I cancelled it and when into more options and tried doing a system restore which also didn't work and said a bunch of my files couldn't be read. When I looked back at the system repair log it said "system volume on disk is corrupt." I googled it trying to find something to help me, and every place said to run sfc scan, which I did on command prompt, which always gave me the reply "there's a system repair pending which requires reboot to complete" and since my computer can't reboot properly no matter what this is what it'll say. Is there some way to run this scan or another way to fix my computer without having to lose all my data? I have some really important files on here. I've also tried running chkdsk /r /f in command prompt which it wouldn't let me do and said it can't lock the current drive because the type of file sytem is NTFS.
My wife shout down her computer this morning took it on remote location for work today but never booted it up. When she got back home tonight it wouldn't boot up. I don't know what to call these screen but some Startup Repair screen. Just says Repair action: Boot sector repair, Result: Failed.I downloaded and burned to CD the boot CD for the MiniTool Partition Wizard Home Edition but I don't know what disk I am even looking for. I see 3 partitions listed for one disk.The only one with a label is BDEDrive and it's 300 MB. The other two have *: as what I would call a label. One is 297.79 GB and the other is 12.34 MB. The BDEDrive is the only with with status of Active. NTFS on that partition and Other on the big partition.
I was having trouble migrating my OS to a new ssd and received the "Bootmgr is corrupt system can not boot" screen repeatedly after restoring from system image, kept happening so I just decided on a fresh install. Install went well and was fully functional (eg drivers and devices) yet when restarting after installing microsoft office, I got the "Bootmgr is corrupt system cannot boot" appeared and now cannot get the pc past this point no matter how many reboots.
I have an Acer Aspire one. It came with XP and I have it dual booting into Windows 7 which is working well which I installed from a USB Drive as this model doesnt have a CD Drive.
In the main boot screen it says "Earlier version of Windows" For XP and "Windows 7" for windows 7. All was working well until yesterday...
Now I can't boot into "Earlier version of Windows" i.e. XP. It gives me the C:\windows\system32\config\system is missing or corrupt message. I can boot into Windows 7 fine but all of my work stuff is on the XP platform (I know I can access the files from "7" but I need to get it operational again).
Any ideas? Can I do a repair from the USB Drive?..I've tried a couple of things to boot from the USB Drive but to no avail. And I can't find the BOOT.INI file from XP (I think it gets moved to Windows 7's hidden boot partition when I installed it. I cant seem to access that partition either).
installing Windows 7 on a virtual machine.I have 178MB RAM (which I know isn't enough), but it does the Starting Windows screen before the installation, but then it comes up with this error: File: windowssystem32configsystem Status: 0xc0000001 Info: Windows failed to load because the system registry file is missing, or corrupt.
XPS L401X Base Genuine Windows(R) 7 Home Premium 64bit (English) Intel(R) Core(TM) i7-740QM Processor 6GB 1333MHz DDR3 SDRAM (1 x 2GB + 1 x 4GB) 640GB 7200RPM Hard Drive
Lately whenever i try to start my computer it pass the Dell Bios and then directly goes to the screen which states Repair your system or Start windows normally When i chose repair system , it start downloading windows files and then launch the windows , but hung up at the sky blue login window with only movable cusor . When i choose to start windows normally it gives me BSOD momentarly ( hard to see the message) and then restarts again . i tried with the advanced boot up options like repair my computer , all safe modes , restore to last good configuration but it does the same and hangs at windows loging sky blue window .I Tried to run the Dell PSA+ Diagnostic and it returns with 2000-0146 error . As per the Dell online solutions for this type of error ,I tried to reinstall the Hard disk but the problem still exist.
I have a Windows 7 Installation Problem. Firstly my specs:i7 3820Rampage IV FormulaGTX 680 EVGA16 GB Corsair Veangence RAM (purchased today because i thought the old ram could have been the issue) I have a 120GB Intel SSD which i want to install windows 7 on, the installation is succsessful, but when it restarts automatically, Windows Boot Manager appears with this messege: WINDOWS FAILED TO START. A RECENT SOFTWARE OR HARDWARE CHANGE MAY BE THE CAUSE.TO FIX THE PROBLEM: (Just says steps to get into windows repair)Than says:FILE: Windoessystem32configsystemSTATUS: 0xc0000017INFO: Windows failed to load because the system registry file is missing or corrupt. I have tried:Changing the SATA port for my ssdWindows RepairCopying the Windows 7 disc at 1x speed.Trying to install it again and again..
I can't get system restore to work all the way.I keep getting error messages. The first error message said this:"System Restore did not complete successfully. Your computer's system files and settings were not changed.System Restore failed while mounting the registry from the restore point. An unspecified error occurred during System Restore. (0x800703f1)".A different error message was saying that Restore didn't work because it failed to extract this file: C:Program Files (x86)AdobeAdobe Premiere Elements 7.0x0407.ini So, I booted into safe mode and I deleted every single Adobe Premiere Elements file on my pc. Then I tried to do system restore again, this time from safe mode - but restore still didn't work. I keep getting the same error message. I have tried all the other restore points, with no success.Also, if this info helps - last week I installed a new internal 2TB Hard Drive onto my computer - it's the "K:" drive. A few days later I was getting ready to create a regular Restore Point, like I do every few weeks. But that's when I noticed that "System Restore" now shows two drives "C:" and "K:", and "K:" was greyed-out. So, I clicked the "Configure" button to configure the "K:" drive.
So, I wasn't sure that if the act of configuring the "K:" drive might have caused this whole - not being able to Restore issue. For example, by adding a new hard drive and then "Configuring" the drive, so that System Restore can work/talk with the new drive - did that somehow give System Restore a split-personality disorder? [code]
all the icons on my screen have gone white and i cant click anything not even the start button. when i bring up the task manager all it is is a white box. i can login in fine but that is it. when i try torestore nothing happens, i dont have any restore points so i dont want to do a complete restore if i can avoid it. i have tried running chkdsk in safe mode but nothing has worked. i have also run avg rescue cd form a usb and it identified a trojan but i deleted it, still no effect. i have also tried using the recovery cd i got with my samsung laptop but can only use the startup check tool. this comes back with no issues but i cant use any of the other options.
I would like to begin using an SSD in my older Tower. I use Windows 7-Pro-64 with 4GB's of Ram. I would like to know if I were to install 7 on an SSD and assign the Systems Drive Letter to A:, if I would have any trouble with 7? Additionally, would Applications like Office, BoostSpeed, Picasa, etc. install on C: as they did before or would they install on A?
I have a nearly new system with a Gigabyte motherboard. Everything had been running ok the errors began appearing and the system went into a start up loop.
After having it examined by a computer engineer the only thing he could do was to re install a trial version of Windows 7 in the hope that when I activate it (in the next 30 days) the motherboard will accept the new product key.
I am at a loss as to why my system crashed initially but after several technicians have looked at the system this is the best they could do. If its going to be an issue I wont activate and will start using a Linux OS if I have to.
I have a Compaq Laptop It run on Windows Vista Home Premium 32bit. It is having this problem that the wireless internet won't connect, I have done system restore so many times and every time it still won't work, sometime it will.
trying to factory reset my computer and ever since i upgraded to win7 f11 system recovery won't load up for me i tried CTRL + f11 still no luck i tried other keys also it just loads me up normally and the recovery disc doesn't have factory reset option me i wanna reset my whole computer before i get my new cpu ram een over a year i keep trying for days every couple months to get it to reset but no luck so i finally
I am helping a friend with her Windows 7 laptop which crashed this evening. Startup repair has tried several times but still cannot fix the problem. System Restore fails as well despite trying numerous restore points.The log show that a root cause was found:
Boot critical file C:CI.dll is corrupt
She has important personal data on this system so a fresh OS install is not an option yet.THis will be a good learning experience for me as I am looking into starting my own computer repair business. I'm not quite sure how to proceed with this. What should I do from here? Do I need to remove her HD and use a data recovery app on a separate system to recover her files, then reinstall Windows 7?
I'm running Windows 7 Home Premium 64bit. When I try to do a System Restore, it seems to run to completion, reboots the system and then issues the following message:
"System Restore did not complete successfully. Your computer's system files and settings were not changed."
Same result in Safe mode. Same result with AV disabled. (Kaspersky Internet Security 12)
I am using desktop system windows 7 OS and it was working properly till last Friday when I was working on that day my monitor became fully white and system hang up so I restarted my system, that time on wards some time its restarts and sometimes its showing resolution issue line fully doted or lines etc.. so I thought it may be some RAM issue so I checked the RAM it is working properly and i checked the BIOS also but no use I face the same problem, what should I do to sort this problem,
my laptop starts up as the "windows did not shut down properly" screen where I can start windows normal to do repair. When I start windows normally it sends me to the repair screen. And when I select system repair it just freezes at a light blue and geen screen and the only thing showing is my cursor. Ive tried to run the system in safe mode but it freezes at classpnp.sys, and eventually sends me back to the repair screen that is frozen. I don't believe I have my windows 7 installation disk for my laptop so that is out of the equation.
My brother was using my computer and said it was updating when this happened so Im not sure what caused all this.
I installed Windows 7 RC 64bit on my Ausus Striker II Formula Motherboard (Nforce 780sli) and everything was working sweet.
I attempted to do a System Transfer from my old Windows Vista 64bit (where you transfer your documents etc.), this appeared to go well however now my network connection will not work. DHCP or Static IP settings dont work. I am unable to change the 'unidentified' network's location from public.
