Scanning On A Network
Sep 10, 2009
I am not sure if this is a Win 7 problem, MS Office problem or whatever. If I have posted this inappropriately, please forgive and I will go away.
I am running Office 2003 under Windows 7 RC. My HP All in One Photosmart 2575 is connected to my network via the router and prints just fine. However, Microsoft Office Document Scanning does not recognize the device as a scanner. The 'Choose Scanner' box is empty. If I connect the All in One to a USB port, Document Scanning finds the scanner and it works as expected.
What must I do to get the All in One to be detected as a scanner under Windows 7 when connected as a network device?
View 6 Replies
ADVERTISEMENT
Jul 17, 2012
I'm looking for really good network tools software, that can completely manage my LAN - monitor network activity on all PC's on the LAN (upload/download activity), port scanning, wireless management, assigning IP addresses and just all the general network tasks.
View 3 Replies
View Related
Jul 22, 2011
In order to resolve another (game-related) problem it was recommended to me that I use the command prompt "SFC /Scannow". However, when I did this, the following appeared:
In case anyone asks, I did run it as an administrator (the scan wouldn't start otherwise). I've tried going to the log it talks about, but I don't know how to open it (I'm not so good with computers). I'm using Windows 7. I apologize for the lack of information, but I'm not too sure what would be needed and I'm in a bit of a rush;
View 11 Replies
View Related
Nov 10, 2011
When scanning a document with my HP Laserjet 3052 how can I save it as a pdf file?
View 4 Replies
View Related
Apr 6, 2011
I have a wireless connection between my Lexmark Pro205 printer and my new Windows 7. I can't figure out how to scan and then send documents. Probably a simple issue but can't figure it out.
View 1 Replies
View Related
Feb 18, 2012
I've been running microsoft security essentials for a while, and didn''t have any problems. Now I tried another virus scan, and i did see all kind of problems, so microsoft security essentials doesnt really work.But the problem is, I cant finish the scan, because i get a bsod during the scan. I've tried scanning with antimalwarebytes, same problem.Dump file is in attachments.
View 9 Replies
View Related
Jun 5, 2010
I'm using Windows 7 Ultimate, Office Pro 2007, and have an older (but perfectly functional) HP PSC1200 all-in-one.I have some documents I want to scan and save as documents (preferably as .doc). Is there any streamlined way of doing this? Fax & Scan only gives options to save scans as a few different image formats - .gif, .jpg, .bmp, and .tif - no other image formats, nor any document formats (.pdf, .txt, .doc, etc.) are available.As of now, after looking online in various places for over an hour, from what I can see, the necessary process is to save the scan as a .jpg, convert it to a .tif, open it with the Office Document Imaging program, and then send it to word.
View 4 Replies
View Related
Oct 10, 2011
I'm looking for a good scanning software for scanners. The Canon one that comes with my scanner sucks. The software also has to support ADF scanning.Also, are there any free alternatives to Acrobat X Pro? I just need to modify PDF's, delete pages, add pages, replace pages, things like that
View 3 Replies
View Related
Nov 29, 2011
scanning program Win 7 that automatically size the area being scanned to the size of the scanned object.
View 8 Replies
View Related
Feb 16, 2011
I have an odd problem whenever I am listening to music, or whenever windows makes any sort of sound (like error alerts, log off sound etc)Any sound is played distorted and is completely beyond recognition. I noticed that this only happens when I have an AVG scan running and if I pause/continue the scan, the music will change almost instantly. This suddenly started about a week ago and I hadn't installed any new software or anything.
View 14 Replies
View Related
Aug 7, 2012
I need help about DNS posion attackthis morning When I enter face my Eset nitice meDetected Port scaning AttackRemote Ip addressxxx.xxx.x.xxandDetected DNS posion AttackRemote Ip addressxxx.xxx.x.xx
View 1 Replies
View Related
Mar 1, 2012
I'm looking for a document scanning software (of course FREE (if available)) to scan in my monthly bills using the automatic document feeder. Once they are all scan in to be able to place them in order. For example my elect bill is 3 pages. Therefore, if I scan it in with all the other bills, and then review it, I would like to put page 3 with the elect bill and not at the bottom of the pile.
View 1 Replies
View Related
Oct 10, 2012
i want to start downloading mods for gta iv and dont have any virus protection , and was wondering what the best was
View 2 Replies
View Related
Nov 23, 2012
I am trying to scan a document and keep getting an error message - no connection. can anyone help me. I have a Toshiba laptop and HP prnter.
View 3 Replies
View Related
Jul 4, 2010
After some searching I located where to create a custom Paper size in the printer setup.However, when I proceed to scan (via the document feeder, not the flatbed), I still cannot get the newly defined custom Paper Size to appear in the pre-defined list of page-sizes that are available - and that is regardless of which program I'm using - the 'aquire image' from Microsoft Photo Premium, the import via Microsoft Live, or the 'start scanning' in the printer setup.
View 8 Replies
View Related
Sep 21, 2012
I have ran western digitals lifeguard tools and they keep giving the error 06-Quick Test on drive 1 did not complete!
"Status code = 07 (Failed read test element), Failure Checkpoint = 97 (Unknown Test) SMART self-test did not complete on drive 1!"
I also get blue screen when I run the extended test, or run a chkdsk. HD tune pro tells me that there are 1461 pending sectors and 1455 uncorrectable errors. Is this bad? 1464 pending sectors on my HD but 0 reallocated.
View 9 Replies
View Related
Dec 12, 2012
I have horizontal lines that scan my monitor whenever i play a game. I can see the horizontal lines only on darker colors like grey, dark-green etc. I have a Samsung E2220 display that runs at 1080p on 60hz on a vga cable (no hdmi/dvi support on it). I tried another vga cable, i tried another power cable but with the same result.I have all drivers updated (monitor and other hardware). My current PC specs are: AsRock N68-C S UCC, Phenom II x4, 4Gb DDR3, Radeon HD7770, 500gb HDD Sata3 and a power supply Sirtec 500W 80+.If I open Far Cry 3, for example, i get those horizontal lines. If i minimize the game i still get the horizontal lines if i have something dark on my display (a grey/dark-green/dark-blue website).Before the HD7770 i had a GTS 450 and had the same problems. Could it be the PSU, or the motherboard or what? I also tried a different display monitor (on the VGA) and had the same horizontal lines scaning my display monitor.
View 9 Replies
View Related
Feb 18, 2011
I was scanning this morning with great success. Abruptly, it quit scanning. I've rebooted the PC, uninstalled the printer and reinstalled it. It still will not scan.
View 3 Replies
View Related
Apr 29, 2011
I've been doing a lot of research on this and I know this topic has been covered a million times, so please bear with me. I'm specifically wondering about the "file-optimization" features in third party defraggers such as Diskeeper or Iobit Smart Defrag (which I use). I know that Microsoft has refined their own defragger, but it seems to me that it has no obvious file optimization and it of course does not have real-time defragging. I've been using Iobit Smart Defrag for a long time and it seems to do a good job of keeping my computer in shape. But, if the Windows 7 defrag works good enough, I'd prefer to just use that and get rid of Smart Defrag to free up CPU and RAM. I'd obviously lose out on the real-time scanning, file optimization, and the boot time scan that Iobit just added to their latest release. But, are these features really necessary for fast, clean performance of Windows 7? Or are these just gimics from third party companies to get me to purchase their software.
View 9 Replies
View Related
Apr 3, 2011
computer suddenly shutdown like power suply is off. but power supply is on.this problem is occurred when website surfing on internet or searching files or when scanning file by antivirus.
MY system hardware and software configration is :
CPU : Intel(R) Core (TM) i3 540 @ 3.07 GHZ
Ram : 2.00 GB
Hard disk : 500 GB
Operating System : Windwos 7 Home premium32 Bit
View 4 Replies
View Related
Apr 28, 2012
I am scanning on my dr2580c using adobe 8 and keep getting a message after the document is scanned " scanning canceled"
View 1 Replies
View Related
Jun 29, 2011
Now when i power on the PC i get "loading ASUS express gate" then gives me a fewoptions but it is so quick i dont have a chance to see it clearly.Next i get "scanning devices" - no devices found.The pc then loads up no probs. Oh and when I power up it beeps..is this noraml as in the past beeps usually mean trouble.My questions before i spend endless hours installing stuff on the PC I want to make sure this is all ok.ie.1.what is asus express gate and why am i getting the above message.
View 7 Replies
View Related
Aug 9, 2012
I have a peculiar issue where I would need to have "Network and Sharing Center" open to be able to see that my my laptop's wireless connection. I would see the signal bar and also see the dreaded red x.Even when I have it open, I can see it refreshing each second; like its losing connection and reestablishing.My internet connection is working and has no issues.
Network and Sharing Center - Open
Network and Sharing Center - Open and refreshed
Network and Sharing Center - Closed
View 3 Replies
View Related
Aug 9, 2011
I'm having difficulty trying to get my new Windows 7 pc set up to share files across my existing home (wired) network which consists of 1 desktop pc running WinXP and 1 laptop running WinXP.I want the 'C' drive on each of the 3 computers to be shared. I've had the 2 Windows XP computers set up and working like this for several years without a problem but I can't seem to get the 'C' drive on the Windows 7 computer to do the same.All 3 computers have the same workgroup name and none of them require passwords to log on to Windows. There are no problems with the firewalls on any of the machines.On the Windows 7 PC when I right click on the 'C' drive and select the 'Sharing' tab, I have set this up to be shared and when I click on the 'Advanced Sharing' button there is a tick in the 'Share this folder' box, the 'Share name' is 'C'. If I then click on the 'Permissions' button, this shows a 'Group or user name' 'Everyone' and this group has Full Control, Change and Read boxes ticked. As far as I can see there is nothing more I can do.
However from my Windows XP computer, when I go to My Network Places and double click on the icon for the Windows 7 'C' drive, I get the message "\Computername is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.The network path was not found"I've subsequently set up a sub folder (of the Windows 7 'C' drive) for sharing by right clicking on the folder, choosing 'Share with' and then selecting 'Specific people'. I then set up a group called 'Everyone' with read/write permissions. Now I can navigate to this folder from my 2 WinXP computers.
View 2 Replies
View Related
Jan 30, 2012
My rig uses a Centrino Advanced-N 6230 wireless mini half-card. It reports the correct name except within the wireless network list. Instead of 6230 it reports 6320. I searched the registry to see if I could find the error, but nothing found. It's only a nuisance, and a minor one at that.
View 1 Replies
View Related
May 14, 2012
Unable to see home network computers in Windows Explorer Network screen.
I have a home network with 2 laptops and 1 desktop. The desktop I use as a "file server" in that all work done on the laptops is stored to the desktop. The desktop computer name is HAL. One laptop is fine and sees the network. The other just stopped seeing it; rebooted the laptop; rebooted HAL; did a number of refreshes without any luck. I opened EXCEL and found a worksheet that was listed that I knew was saved on HAL. Was able to open the file and when I tried the SAVE AS I could navigate through all of HAL just as normal. Went to Windows Explorer and still no HAL listed as a COMPUTER on the NETWORK. I have a internet connection so I know I am making it to the router at least. And when I check NETWORK AND SHARING CENTER it shows an active home network. The laptop is running Windows 7 Home Premium Service Pack 1 Build 7601.
View 4 Replies
View Related
Jan 23, 2013
This sounds really noobie of me but is it possible to improve local network transfer speed by adding a 2nd network card. I was planning to connect one exclusively for lan transfers and another one hooked to a separate wireless router.
Right now only a maximum of 3 users can stream SD videos off the PC before it gets a little choppy.
The pc in question runs on windows 7 and it's board has built in gigabit, I happen to have a spare gigabit card.
View 9 Replies
View Related
Aug 30, 2012
Home network with Wifi and ethernet. Using 3x Notebooks and 3x workstations. One of the workstations (W7 ultimate) keeps changing between Public and Home. When this happens, the internet connection dies. I cannot see other workstations either when on public network. Workstation using wifi. Does the same on cable. When it changes to Public, it disconnects from the internet and I cannot get to the router even though it has the workstation has an IP(DHCP or static). Default gateway and subnet is correct. TCP v4 is being used and nothing else is enabled.
Why is this happening?
- I have tried DHCP as well as Static addresses
- Reconfigured NIC(Netgear WG311T), uninstalled and reinstalled it.
- Removed Wifi connection and re-added it.
- Changed auth type, encryption type and keys to connection
Have I covered everything? The only thing different is that I installed a new router - Duo Plus 300wr. It cannot be the router because all the other notebooks connect to it wireless and so does my iPad, Android device and tablet...so it rules that out?
View 3 Replies
View Related
Sep 6, 2011
My problem is windows 7 hangs and freeze when access 2003 server Enterprise edition. This is not a small network, one of the biggest network.i have doubt on individual users on domain. before 2 months we had department wise users mean, for example Accounts@domainname.local. But after we created the individual users like john@domainname.local to all users. this is i believe the cause of problem. When we acess the server via the software it freezed for 5 seconds and then repeat to normal state. And after some time it hangs for 2 minutes.
View 5 Replies
View Related
Feb 11, 2012
I disabled my network adapter then restarted and now the adapter is no longer showing up in my network connections. How in the world do I get it back? I have looked at other options (like under the registry which was suggested on a couple of places). I have never seen this happen before. I even reinstalled my drivers and still nothing. How do I enable it again?
View 7 Replies
View Related
Jun 7, 2012
how do i keep microsft explorer from trying to surf and find other providers and stay on one instead of showing every provider it can connect too ant2twon@yahoo.com
View 1 Replies
View Related
