I'm looking for a good scanning software for scanners. The Canon one that comes with my scanner sucks. The software also has to support ADF scanning.Also, are there any free alternatives to Acrobat X Pro? I just need to modify PDF's, delete pages, add pages, replace pages, things like that
In order to resolve another (game-related) problem it was recommended to me that I use the command prompt "SFC /Scannow". However, when I did this, the following appeared:
In case anyone asks, I did run it as an administrator (the scan wouldn't start otherwise). I've tried going to the log it talks about, but I don't know how to open it (I'm not so good with computers). I'm using Windows 7. I apologize for the lack of information, but I'm not too sure what would be needed and I'm in a bit of a rush;
I am not sure if this is a Win 7 problem, MS Office problem or whatever. If I have posted this inappropriately, please forgive and I will go away.
I am running Office 2003 under Windows 7 RC. My HP All in One Photosmart 2575 is connected to my network via the router and prints just fine. However, Microsoft Office Document Scanning does not recognize the device as a scanner. The 'Choose Scanner' box is empty. If I connect the All in One to a USB port, Document Scanning finds the scanner and it works as expected.
What must I do to get the All in One to be detected as a scanner under Windows 7 when connected as a network device?
I have a wireless connection between my Lexmark Pro205 printer and my new Windows 7. I can't figure out how to scan and then send documents. Probably a simple issue but can't figure it out.
I've been running microsoft security essentials for a while, and didn''t have any problems. Now I tried another virus scan, and i did see all kind of problems, so microsoft security essentials doesnt really work.But the problem is, I cant finish the scan, because i get a bsod during the scan. I've tried scanning with antimalwarebytes, same problem.Dump file is in attachments.
I'm using Windows 7 Ultimate, Office Pro 2007, and have an older (but perfectly functional) HP PSC1200 all-in-one.I have some documents I want to scan and save as documents (preferably as .doc). Is there any streamlined way of doing this? Fax & Scan only gives options to save scans as a few different image formats - .gif, .jpg, .bmp, and .tif - no other image formats, nor any document formats (.pdf, .txt, .doc, etc.) are available.As of now, after looking online in various places for over an hour, from what I can see, the necessary process is to save the scan as a .jpg, convert it to a .tif, open it with the Office Document Imaging program, and then send it to word.
I have an odd problem whenever I am listening to music, or whenever windows makes any sort of sound (like error alerts, log off sound etc)Any sound is played distorted and is completely beyond recognition. I noticed that this only happens when I have an AVG scan running and if I pause/continue the scan, the music will change almost instantly. This suddenly started about a week ago and I hadn't installed any new software or anything.
I need help about DNS posion attackthis morning When I enter face my Eset nitice meDetected Port scaning AttackRemote Ip addressxxx.xxx.x.xxandDetected DNS posion AttackRemote Ip addressxxx.xxx.x.xx
I'm looking for a document scanning software (of course FREE (if available)) to scan in my monthly bills using the automatic document feeder. Once they are all scan in to be able to place them in order. For example my elect bill is 3 pages. Therefore, if I scan it in with all the other bills, and then review it, I would like to put page 3 with the elect bill and not at the bottom of the pile.
BenQ Scanner drivers for Acer 6698 model scanner for Windows 7 or Ubuntu 12.04 (Linux). Works fine in Windows XP Pro, but not in newer versions or past Ubuntu 9.x
After some searching I located where to create a custom Paper size in the printer setup.However, when I proceed to scan (via the document feeder, not the flatbed), I still cannot get the newly defined custom Paper Size to appear in the pre-defined list of page-sizes that are available - and that is regardless of which program I'm using - the 'aquire image' from Microsoft Photo Premium, the import via Microsoft Live, or the 'start scanning' in the printer setup.
I have ran western digitals lifeguard tools and they keep giving the error 06-Quick Test on drive 1 did not complete!
"Status code = 07 (Failed read test element), Failure Checkpoint = 97 (Unknown Test) SMART self-test did not complete on drive 1!"
I also get blue screen when I run the extended test, or run a chkdsk. HD tune pro tells me that there are 1461 pending sectors and 1455 uncorrectable errors. Is this bad? 1464 pending sectors on my HD but 0 reallocated.
I have horizontal lines that scan my monitor whenever i play a game. I can see the horizontal lines only on darker colors like grey, dark-green etc. I have a Samsung E2220 display that runs at 1080p on 60hz on a vga cable (no hdmi/dvi support on it). I tried another vga cable, i tried another power cable but with the same result.I have all drivers updated (monitor and other hardware). My current PC specs are: AsRock N68-C S UCC, Phenom II x4, 4Gb DDR3, Radeon HD7770, 500gb HDD Sata3 and a power supply Sirtec 500W 80+.If I open Far Cry 3, for example, i get those horizontal lines. If i minimize the game i still get the horizontal lines if i have something dark on my display (a grey/dark-green/dark-blue website).Before the HD7770 i had a GTS 450 and had the same problems. Could it be the PSU, or the motherboard or what? I also tried a different display monitor (on the VGA) and had the same horizontal lines scaning my display monitor.
I was scanning this morning with great success. Abruptly, it quit scanning. I've rebooted the PC, uninstalled the printer and reinstalled it. It still will not scan.
I've been doing a lot of research on this and I know this topic has been covered a million times, so please bear with me. I'm specifically wondering about the "file-optimization" features in third party defraggers such as Diskeeper or Iobit Smart Defrag (which I use). I know that Microsoft has refined their own defragger, but it seems to me that it has no obvious file optimization and it of course does not have real-time defragging. I've been using Iobit Smart Defrag for a long time and it seems to do a good job of keeping my computer in shape. But, if the Windows 7 defrag works good enough, I'd prefer to just use that and get rid of Smart Defrag to free up CPU and RAM. I'd obviously lose out on the real-time scanning, file optimization, and the boot time scan that Iobit just added to their latest release. But, are these features really necessary for fast, clean performance of Windows 7? Or are these just gimics from third party companies to get me to purchase their software.
computer suddenly shutdown like power suply is off. but power supply is on.this problem is occurred when website surfing on internet or searching files or when scanning file by antivirus.
MY system hardware and software configration is :
CPU : Intel(R) Core (TM) i3 540 @ 3.07 GHZ Ram : 2.00 GB Hard disk : 500 GB Operating System : Windwos 7 Home premium32 Bit
I'm looking for really good network tools software, that can completely manage my LAN - monitor network activity on all PC's on the LAN (upload/download activity), port scanning, wireless management, assigning IP addresses and just all the general network tasks.
Now when i power on the PC i get "loading ASUS express gate" then gives me a fewoptions but it is so quick i dont have a chance to see it clearly.Next i get "scanning devices" - no devices found.The pc then loads up no probs. Oh and when I power up it beeps..is this noraml as in the past beeps usually mean trouble.My questions before i spend endless hours installing stuff on the PC I want to make sure this is all ok.ie.1.what is asus express gate and why am i getting the above message.
When selecting Epson Scan, I get the following error message:
'Cannot communicate with the scanner'
I have turned the printer off and back on again. Removed the power lead and plugged back in.I have removed the USB lead and tried it in other ports, without hubs. I have also tried a brand new USB lead.If I use PaintShop Pro X2 and select Import > Twain Acquire > I get the same message plus another message - 'No scanner Found', but if I select Twain source, I get the 'EPSON NX130/SX130/TX130/ME 340.
I can use the printer and copy functions with no problems, so, I am assuming it may be something to do with the OS - Win 7 32 bit as I have tried using WIA and get the same results.
I have Epson 4490 scanner that is connected to one computer running windows 7.In the same room I have another computer using windows xp.I want to be able to use the scanner on both.I have tried to install the software on the xp one,but it will not open the scanner.Just says it cannot be started.Is there a way to share the scanner between the rwo,or how can I get it installed on xp?
I am suddenly faced with a problem, which has never appeared before.I have a HP Scanner [Scanjet 5530] which since having moved from Windows XP to Windows 7 has until the last couple of days appeared as a DEVICE, and has been workable.However in the last couple of days it has disappeared from the list of Devices and its only by switching it's power supply off and on does it comeback.I can then use it for whatever needs to be done, but as soon as its not needed it disappears yet again.
I know I should pick channels 1,6,or 11 but not having any device other then my ps3 I cant run a channel scanner. I have no idea what my neighbors wifi's channels are should I just leave my routers channel on auto as it is always changing wifi channels my guess it's got a built in scanner I don't know if thats true it's a cheep belkin N150 or should I just go for a shot in the dark and pick one of the 3 channels?