After some searching I located where to create a custom Paper size in the printer setup.However, when I proceed to scan (via the document feeder, not the flatbed), I still cannot get the newly defined custom Paper Size to appear in the pre-defined list of page-sizes that are available - and that is regardless of which program I'm using - the 'aquire image' from Microsoft Photo Premium, the import via Microsoft Live, or the 'start scanning' in the printer setup.
Can I actually specify a custom size for these taskbar icons other than small or large as here? I have so many of them and my taskbar have already two rows and sometimes when I open programs or whatever else that is NOT included as a shortcut button on the taskbar, it takes extra space at which point the taskbar becomes scrollable with 3 rows. Not a good thing. I hate it with a passion. Yes I could make my task bar with 3 rows, but no, I don't like to waste my precious screen space. So basically I'd like to to make these icons a little smaller, kind of like the QuickLaunch icons.
I'm running Windows 7 64-bit on a custom PC with Pentium Dual-Core 2.50GHz and 4GB RAM and have been having some "low memory" issues occasionally, seemingly due to Firefox hogging up memory.
So I looked at what my paging file settings were. They're currently set as "system managed": minimum 16MB, recommended 6141MB, and currently allocated 516MB. It says in Windows Help that it automatically sets the initial paging file as minimum four times the RAM plus 300MB, and the maximum as three times the amount of RAM. Obviously it hasn't set these parameters. My question is: should I change the settings manually to reflect these recommendations?
BTW: I have less than 1GB on the drive, so would Windows change the settings to reflect this, or does it allocate it separately?
I'm getting a kernel data inpage error BSOD on windows 7 ultimate x64. It seems to happen randomly regardless of activity (idle, gaming, video playback) and I'm having trouble finding the cause. The computer will not save dump files. So I've attached a picture of the BSOD, and an event viewer log.
Application is developed on XP, hosted on win7. I want to print 8.5" x 5.5" page on dot matrix printer (Epson LX 300+ II). It's printing on xp without any problem. Even though I set default printer, created custome paper size, in win7, its not printing, by default taking Latter size
I'm gettingthe same "out of memory" error message on Outlook 2007 running under Windows 7 (64 bit). Reading this thread, I checked my RAM and Page File Size and they are both ~6G... Should I REALLY increase my Page file size to 12G?
I have two printers USB connected to my Dell Vostro running Win 7 Pro 64 bit. I also print to PDFs, All printing operations default to A4 page selection. How can I change this default selection?
I'm having this very strange problem on my PC which i recently formatted to start from scratch.I'm running Windows 7 64bit and everytime I open a page in a browser (IE, Firefox or Chrome) the actual page appears very small in the top left hand corner of the window...I'm also having this problem when using Skype.I get the feeling this may have something to do with my resolution....?I never used to have this problem before formatting.
I'm having this very strange problem on my PC which i recently formated to start from scratch.I'm running Windows 7 64bit and everytime I open a page in a browser (IE, Firefox or Chrome) the actual page appears very small in the top left hand corner of the window.I'm also having this problem when using Skype.I get the feeling this may have something to do with my resolution....?I never used to have this problem before formatting.
just built a new i7-930 and installed Windows 7 Professional. With older versions of Windows I was told to put the swap file on another drive and to have the begining and ending sizes the same. Does this theory still hold true for W7? Looking for advice, I have 6GB of Ram on an Asus Rampage II Extreme MB.
I used to have a program that makes this change but I can't figure out what its name was. I re-installed Windows 7 on my machine and forgot to save its installation file.It's a plain, all gray and squarish program, with a menu at the left and the corresponding options at the right pane. I has a lot of cool intuitive menus for everything one wants to change in Windows 7. I thought it was a TweakUI from Microsoft, but it looks like there's no such thing.I just tried a program called Ultimate Windows Tweaker but that's a different one that doesn't have the option written at the title, and is also less organized IMO.
I watch videos from this site Poker Netcast | Live At The Bike | LABTTheir login is https.Ive been in IT for 15 years and even this has stumped me.When I go to login in IE9 starts looping from the login page to the https page and back to the original page and never ends. I load firefox, same issue. I load Crome, it worked for 1 day then same issue. It used to login in fine last week. It logs in fine on my 2 other PCs and my Kindlefire.I have checked for viruses with Avast and A-Malware Bytes in safe mode - nothing. These 2 pick up 98% of stuff. Personally I dont think its a virusn IE9 - Deleted browsing history, cookies, temp internet files, everything under the Geneeral/Browsing History section. Did a disk cleanup, put the site inthe trusted zone, turned off popup blocker just in case, Cleared SSL state, Reset IE9. Zippo
i have an intel i5 2400 cpu, combined with 4gb ddr3 memory. mobo is dh67bl - revision 3. no gpu installed.power supply is via corsair vx450.problem i been facing:
1) bsod saying that a clock interrupt wasnt recd. [url]
2) bsod saying: page fault in non paging area. couldnt grab a screenshot for this.
3) display randomly goes off for a split second and reappears.. but the color of the panes go blue (i havent chosen blue. my setting is for clear pane.)[url] this error solves itself after random number of hours/mins
4) display vanishes for a split second and reappears, and a small balloon at the bottom right corner prompts that the display driver had stopped working.
5) system plain hangs/stops responding. randomly happens.. but more so while on Internet, or after hrs of it idling, i come back to the comp and try to scroll the content onscreen.sometime it revives from the stuck state as if nothing happened, sometimes i have to give it a cold boot.
6) while reading forums with blue bands.. the blue bands kinda form blurry bars which stretch till the end of the screen. i tried to grab a screenshot but the screenshots were clean. the bands moved as i dragged the image about.
7) also, my comp's display went off one day and within a second came back with a blue-ish hue. it restored itself but again has gone back to blue-ish.
other relevant information:
windows 7 x64 no other os resides/installed on system full retail version os was installed in july.
When I marked a whole folder or a couple of files in Windows Explorer in Windows XP then the sum/total size of all marked files is (was) shown in the status bar in the bottom of the WinExp window.
In order to resolve another (game-related) problem it was recommended to me that I use the command prompt "SFC /Scannow". However, when I did this, the following appeared:
In case anyone asks, I did run it as an administrator (the scan wouldn't start otherwise). I've tried going to the log it talks about, but I don't know how to open it (I'm not so good with computers). I'm using Windows 7. I apologize for the lack of information, but I'm not too sure what would be needed and I'm in a bit of a rush;
I am not sure if this is a Win 7 problem, MS Office problem or whatever. If I have posted this inappropriately, please forgive and I will go away.
I am running Office 2003 under Windows 7 RC. My HP All in One Photosmart 2575 is connected to my network via the router and prints just fine. However, Microsoft Office Document Scanning does not recognize the device as a scanner. The 'Choose Scanner' box is empty. If I connect the All in One to a USB port, Document Scanning finds the scanner and it works as expected.
What must I do to get the All in One to be detected as a scanner under Windows 7 when connected as a network device?
I have a wireless connection between my Lexmark Pro205 printer and my new Windows 7. I can't figure out how to scan and then send documents. Probably a simple issue but can't figure it out.
I've been running microsoft security essentials for a while, and didn''t have any problems. Now I tried another virus scan, and i did see all kind of problems, so microsoft security essentials doesnt really work.But the problem is, I cant finish the scan, because i get a bsod during the scan. I've tried scanning with antimalwarebytes, same problem.Dump file is in attachments.
I'm using Windows 7 Ultimate, Office Pro 2007, and have an older (but perfectly functional) HP PSC1200 all-in-one.I have some documents I want to scan and save as documents (preferably as .doc). Is there any streamlined way of doing this? Fax & Scan only gives options to save scans as a few different image formats - .gif, .jpg, .bmp, and .tif - no other image formats, nor any document formats (.pdf, .txt, .doc, etc.) are available.As of now, after looking online in various places for over an hour, from what I can see, the necessary process is to save the scan as a .jpg, convert it to a .tif, open it with the Office Document Imaging program, and then send it to word.
I'm looking for a good scanning software for scanners. The Canon one that comes with my scanner sucks. The software also has to support ADF scanning.Also, are there any free alternatives to Acrobat X Pro? I just need to modify PDF's, delete pages, add pages, replace pages, things like that
I have an odd problem whenever I am listening to music, or whenever windows makes any sort of sound (like error alerts, log off sound etc)Any sound is played distorted and is completely beyond recognition. I noticed that this only happens when I have an AVG scan running and if I pause/continue the scan, the music will change almost instantly. This suddenly started about a week ago and I hadn't installed any new software or anything.
I need help about DNS posion attackthis morning When I enter face my Eset nitice meDetected Port scaning AttackRemote Ip addressxxx.xxx.x.xxandDetected DNS posion AttackRemote Ip addressxxx.xxx.x.xx
I'm looking for a document scanning software (of course FREE (if available)) to scan in my monthly bills using the automatic document feeder. Once they are all scan in to be able to place them in order. For example my elect bill is 3 pages. Therefore, if I scan it in with all the other bills, and then review it, I would like to put page 3 with the elect bill and not at the bottom of the pile.
