Scan Error Canon Mx330 Windows 7?

Oct 2, 2011

The scan function of my Cannon MX330 under Windows 7 is not reconized.I have installed several times the driver for Windows 7 (64 bits) from the Cannon website without any results.

View 1 Replies


ADVERTISEMENT

Canon Scan Toolbox Windows 7 32bit

Nov 11, 2011

seems there is no driver for a canon lide 50 and the win 7 32 bit os?

View 1 Replies View Related

Driver Canon Scan Gear For Windows 7?

Nov 16, 2011

Driver canon scan gear for windows 7?

View 3 Replies View Related

Can't Scan With Canon Pixma MX700

Jun 25, 2010

Back in the fall when I switched over to Windows 7 Home Premium x64 from Vista Home Premium SP2 x64, I installed the software for my Canon Pixma MX700 multifunctional printer. I used the original Vista driver installer disc, and despite an warning message about a "known compatibility issue" the printer and scanning functions worked fine. I use the Pixma on the LAN via a wired ethernet connection. Worked fine for occasional scanning in November, December, and January.Then for months I had no need to scan anything, just printing over the network with no problems.Last weekend I needed to scan something. I usually just push the scan button on the printer, verify the computer it's going to scan to (it lists them), and away it goes. This time my computer threw an error about the scanner driver saying the scanner wasn't on the network. Huh? If the scanner's not on the network how did the computer know it was trying to send a scan... So I bailed on that and instead used the MP Navigator EX software on the computer. It failed too, giving the "scanner not connected" error, either using Navigator's direct interface or telling it to open the scanner driver which brings up a slightly different interface (when it worked).First I went to the Canon site and d/l'ed all the latest drivers for 7 x64 and installed them. Still get the same errors. Tried setting it up to scan via USB temporary connection. If I install it that way it works, but it's not a long term solution. And it stops working after a reboot. The odd thing is the scanner works over the LAN after I set it up for USB (when using NAvigator, because the scan to lan button on the printer doesn't work of course), again until reboot.

View 8 Replies View Related

Drivers For Canon Scan Lide20

Jun 6, 2012

Drivers For Canon scanner are required.

View 1 Replies View Related

Canon-scan LiDE 600F / Windows 7 64bit Pro (v6.1 Bld 7600) - Fails To Install Correctly

Mar 8, 2010

Hardware Canonscan LiDE 600F / Windows 7 x64 Pro?I have tried to install "LiDE 600F Scanner Driver Ver. 12.1.2 (Windows 7 x64/Vista64/XP x64)" lide600fvst641212ea15.exe (version:12.1.2 Size:12.19MB Posted:10/19/2009). But although it SAYS that it has installed correctly, TWAIN does not fire up and I am unable to use the scanner. It also makes a weird noise through the computer's loud speaker going "dee-dum" every 2 seconds.(Fwiw, the sound is like two low-ish frequency guitar strings being plucked, about 1 octave apart).Also in the Control Panel unders System the scanner dialogue is disappearing and refreshing every 2 seconds as well.It sounds to me like something is rejecting the driver, but not showing any error message to screen.- Is there any way to (permanently) "give permission" to the driver to run?

View 1 Replies View Related

Canon MX860 Won't Scan Using Wireless Network

Apr 22, 2010

I have a new Canon MX860 connected to my wireless LAN. My XP laptop can print and scan with no problems. However, my new Windows 7 laptop will print but not scan. Have tried uninstalling/reinstalling the Canon software and drivers (with firewall/antivirus turned off - as per Canon advice). The message is always the same:" Cannot communicate with scanner for these reasons-scanner is disconnected-scanner is turned off.

Have tried using Scangear Tool but it can't find the scanner-even when I sit it within 30cms of both the laptop and my wireless router. Canons last response is that it must be an incompatibility with Windows 7 as the printer works fine with XP- I have to take it up with Microsoft- Canon for the support. Canon IJ Network Utility also loaded but will not run with Windows 7 (64 bit). Also tried changing compatibility settings for all software & drivers in various combinations - but the message is the same. People on this forum resolved my only other problem with spooler errors

View 1 Replies View Related

Drivers Canon Scan N1240U Required

Feb 15, 2013

Canonscan N1240U...will it work with the twain driver for windows 7-64 bit available on this website?

View 8 Replies View Related

When Try To Open Epson Scan It Comes Up Error Cant Find Files

Jun 5, 2012

When i try to open epson scan it comes up error cant find files I am using windows7 64bit and the software came with the epson stylus sx445w printer works fine

View 3 Replies View Related

Canon Pixma Mx870 6a80 Error

Jul 22, 2012

My mx870 is showing 6A80 Printer Error message. I turned power off and on like it suggested, but that did not fix the problem. It also said to check manual, if that doesn't work but there is nothing in manual about 6A80.

View 2 Replies View Related

Canon Lbp 2900 Driver For Windows 7 32bit - "communication Error"?

Dec 23, 2011

I faced an error during installation of LBP 2900B printer on Windows 7 (64 bit).The error was "communication error".

View 3 Replies View Related

Canon X64 Printer Drivers For Older Canon Printers

Dec 11, 2009

Vista x64 natively supported a bunch of canon printers with x64 drivers. For some printers this support has gone under Windows 7 x64. Perhaps this will help some people ... .

I mounted a Vista x64 ISO-image/source, extracted the folder with the canon printer drivers and installed the Colorpass Z40e driver under Windows 7 x64. In my case I used this driver für a Canon Colorpass Z400e (Canon CLC 1100).

Extraxct :

- use 7zip

- under options check "wim"

- open the install.wim an verify your vista version (important if there is a 64bit and 32 bit version on the same DVD, in my case there was only a 64bit on the systembuilder DVD)

- choose the right folder and extract the canon printer driver folder with 7zip

windowssystem32driverstorefilerepositoryprnca001.inf_c505b61f

that is it .

View 0 Replies View Related

Canon LiDe 80 And Canon PIXMA IP4000 Problem

Nov 8, 2009

Upgraded desktop to 64-bit and discovered that my Canon LiDe80 and Canon PIXMA iP4000 drivers are incompatible. So after some research and not sure how accurate, I read that the professional version would allow more of the 32-bit drivers to work.

Is that correct?

View 4 Replies View Related

Why Won't Windows Update Scan

Apr 28, 2012

I just got my laptop from service. It is a Sony Vaio They supposedly restored my computer to factory setting but I can't update my computer.

The bar to the left is red and i see a red shield with a white x and it says most recent checks for updates: never

updates were installed: never i go to installed programs and nothing has been installed since early 2010.

It's like whenever i try to click check for updates button it's like something is blocking it from connecting and scanning is the best way I can explain it. I desperately need help to update all my software and security patches etc

View 1 Replies View Related

Windows Update Won't Run / Scan

Apr 28, 2012

I just got my laptop from service (they replaced a new hard drive and installed windows 7). It is a Sony Vaio.i own it now but it's a slightly used rent-to-own type of deal so no windows dvd or system restore or anything.They supposedly restored my computer to factory setting but I can't update my computer. The bar to the left is red and i see a red shield with a white x and it says most recent checks for updates: never updates were installed: never i go to installed programs and nothing has been installed since early 2010.It's like whenever i try to click check for updates button it's like something is blocking it from connecting and scanning is the best way I can explain it. I desperately need help to update all my software and security patches etc.I found something online where it says to type services.msc and stop it and go to c/windows/software distribution and delete the files and then start the service so then windows updates still won't scan (windows 7)....says service is not running but it is.

View 2 Replies View Related

Get The Scan To Not Stop During Sleep Mode Or Scan If It's In Sleep Mode

Jan 19, 2012

wreaks havoc with my Norton full system scan. It is scheduled weekly, but never does it, because my computer is on, but sleeping. How can I get the scan to not stop during sleep mode or scan if it's in sleep mode? I having to constantly unsleep my computer or change my control panel settings then change it back.

View 8 Replies View Related

Windows 7 Checkdisk Scan Now Says Need To Format?

Oct 20, 2012

I have an external usb hard drive (2tb I think) that I ran Microsoft scan disk on I (right click the drive in my computer then tools etc.)Option to automatically fix errors was checked.Before the scan I could access the drive and files but was having problems with a certain program so I decided to run the scan. It said it found errors and fixed them from what I saw it didn't look like it recovered any corrupt data files but must of fixed something else.Now it says I need to format the drive I said NO but now it just hangs if I try to open the drive right click on the drive etc. What is the best way to save my data from getting lost?

View 1 Replies View Related

Lost Windows Scan And Fax After IE 9 Install

May 18, 2011

After the IE9 install and a restart the Windows Scan and Fax program is no where to be found. It'snot in the programs list or in the windows turn on or off list.

View 7 Replies View Related

Windows 7 Fax & Scan Not Sending Complete Fax?

Jan 28, 2011

I'm running Windows 7 and have activated the Windows Fax & Scan software. The modem Verizon USB760 is our fax modem. When the software was initially activated, outgoing faxes were sent fine. Recently, it's stopped working completely. Only the coverpage is sent, the fax job fails and retries as many times as I have it configured or until I delete the fax job. I've tried typing directly into the section for page 2 of the fax, and I've tried attaching pdf or txt files with the same incomplete result. I can view the complete fax in the outbound box.

View 1 Replies View Related

Unable To Print After Using Windows Fax And Scan?

Apr 27, 2011

I am unable to print after using Windows Fax and Scan. I get the message saying that it can not access the documents folder.

View 2 Replies View Related

Can't Scan Windows 7 To Capture Text

Nov 16, 2011

If I try to grab text in a website window and move the mouse down while keeping the mouse Left button depress, the window will not scroll upward. I have to manually press the down arrow key to continue my text grab or selection. Can this be reversed?

View 9 Replies View Related

Windows Fax And Scan No Longer Works

May 3, 2011

We used to use ZetaFax, I'm told. I'm new to the company. We no longer use ZetaFax. Since bringing in Windows Vista Business and Windows 7 Pro computers, and Windows 2008 Server, we now use Windows Fax and Scan.We use Fax Server on the server with quad port RocketModems installed.Now, here's the problem.Some of our employees are having problems using Windows Fax and Scan. The way they use faxing is by finding the file (usually an Adobe Acrobat pdf), open it and then go to the Fax printer.This then auto faxes the document using Windows Fax and Scan.For most of our employees, this works fine.But, suddenly for some it does not work. When I visit the ones who can't fax, I open Windows Fax and Scan and try to launch it. It does not launch. On some of the computers, the user gets a message that the format must be tif. For others, they get a message saying that they can not access to the document folder.I'd like to remove Windows Fax and Scan on these computers and try to reinstall it and see what happens. How can I do that?

View 4 Replies View Related

Windows Fax And Scan Won't Send All Pages?

Sep 13, 2011

I can't complete a fax in windows fax and scan it will send maybe 2 pages of a 4 page fax and then shut down with a fatal error message. I'm running windows 7/64 bit and using an older Agere V.92 ver. 8.36 internal modem that I removed from my 10 year old HP desktop computer and installed it into my new emachine ( Acer ) ET1352G-03W. The modem is updated with the current drivers as shown in device manager but I don't know if that is enough. If you think the modem is the problem what modem should I buy? I can connect just fine but it just won't complete sending all pages that I loaded..

View 1 Replies View Related

Windows 7 Fax And Scan Cannot Find Modem?

Oct 16, 2012

As reported elsewhere, I had some issues with my Win 7 installation which involved more fiddling than needed but most everything is working again. Why more than needed? In the list of possible solutions, I was given the one that fixed the big problem last. C'est la vie. Now, I get to fiddle with fixing little problems. The latest is that Windows Fax and Scan are no longer workingI have a modem in my computer solely for when I send faxes. With the way that they keep eliminating slots on motherboards, I don't know what I'll do when I upgrade but that's neither here nor there. Back to the story.

A couple weeks ago, I sent a fax without any issues. Today, I needed to send one and Window Fax and Scan couldn't find the modem. When I click on "Connect to a fax modem" I get "an error occured. Please try the operation later."I opened a console and sent some AT commands to the modem and it responded. Off hook, on hook, dial. It is set as COM 3. I do have a Bluetooth dongle that is COM 6.Before Win 7, I used WinFax Pro. I had been using WinFax for years and years and never had a problem. However, WinFax Pro doesn't work with Win 7. One last question. When I started up WFS, it no longer shows my previously sent faxes. Where are those hidden?

View 7 Replies View Related

Missing Windows Fax And Scan Program?

Jan 3, 2012

Is their anyway I can retrieve this program I may have inadvertently deleted this program or it may have never been installed on my compputer in the first place.

View 4 Replies View Related

How To Scan With A Wireless Printer Have Windows 7

Mar 29, 2011

How to scan with a wireless printer, i have windows 7. My printer is HP Photosmart D110

View 2 Replies View Related

Windows 7 Fax And Scan Multiple Pages?

May 2, 2011

I use printer HP PSC 2355 all-in-one. Lately I changed my computer which now uses Windows 7. Ever since, the scan mode of the printer does not function (I receive a message "No scan options" ). Then, I found out that I can use Windows Fax and Scan. However, I cannot use it for scanning multiple pages. I am now in an awkward situation but I would not like to change my printer yet. Therefore, could you advise me if (a) I could do something with the printer to enable scanning as before? how I could scan multiple pages in one file using the Windows Fax and Scan.

View 1 Replies View Related

Hp Scan-jet 3300c Driver To Windows 7 64x?

Dec 29, 2011

I need Hp scanjet 3300C driver for windows 7

View 1 Replies View Related

How To Install Epson Scan In Windows 7

Apr 20, 2012

i cant use my epson scanner help me pls?

View 1 Replies View Related

Stop Windows From Trying To Scan External Drive?

Nov 16, 2010

How can I stop Windows from asking whether I want to scan and fix an external drive,whenever I turn on that external drive. It gives me the choice to scan and fix or continue without scanning.The annoyance is that when I turn on the external drive, I may be doing something else and the notification will pop up or rather pop under all the other programs and windows I may have open and won't see the notification until I click on the taskbar and Windows Explorer is waiting for some response

View 6 Replies View Related

Windows 7 Fax And Scan Program Won't Recognize Scanner

Jan 24, 2012

Windows Fax & Scan program will not recognize my scanner when I try to scan a document to fax. I just installed an external modem to send faxes using the Windows Fax & Scan program, which BTW worked fine when I typed a document and faxed it. If I try to use the Scan feature instead, I get an error window telling me that no scanner was detected and to check my connections. My scanner, which is a Canon 8400F with the Windows 7 64-Bit drivers, works fine on it's own. I am having no luck making it function with the Windows Fax & Scan program.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved