SSD Installation Failed To Boot (0xc000000e )?

Feb 10, 2013

I just bought a new Lenovo T430s and a Samsung 840 Pro SSD. Cloned the system by using Norton Ghost (First cloned the hidden disk, then Windows 7 disk) as the manual (Samsung 830 manual) said. Then put the HDD out and put the SSD in. However, the windows failed to bootWindows failed to start. A recent hardware or software change might be the cause. To fix... Status: 0xc000000e Info: The boot selection failed because a required device is inaccessible. I checked the internet and just could understand some basic operations. For example, I entered into bios and saw SATA Controller Mode option [AHCI] Did not find any "Storage config" option... in the main menu. Also, I pressed F12 to the boot menu and selected Samsung 840 Pro but still no work.

View 2 Replies


ADVERTISEMENT

Boot Selection Failed 0xc000000e

Sep 13, 2012

I have an Intel i5, Windows 7 Ultimate, and SSD main and 2 HDs SATA. One day, blue screen BSOD appeared and Pc is restarted. Then appears the following error: Window failed to start. A recent hardware or software change might be the cause.

View 1 Replies View Related

Error At Boot : 0xc000000e - The System Has Failed To Start Because A Required Device Is Inaccessible?

Aug 10, 2012

Okay, so this just happened out of nowhere. Nothing seems to have led up to this -- the system booted and shut down successfully, and no software updates or installs were done during the period of time it was on when it was last working. I've attempted many things, but none seem to work. /ScanOs reports no OS detected, while startup repair said the OS was booted successfully. bcdedit also shows no directories linked to "unknown". CHKDSK reports no bad sectors, so such can be discarded. This happens every time I attempt to boot to Windows 7 (Home Edition, x64). I have a copy of Fedora 17 set to dualboot with it

View 14 Replies View Related

Dual Boot Installation Failed

Mar 4, 2010

My pc consist of a 200GB drive partition, one side has Win7 x86 and the other Windows Xp, Xp recently failed on me so i had to reinstall it, So i figure I'd installed Win7 X64 Since i use this Partition to run 3D and design Software, figure i could use the memory upgrade. Setup went fine, But now it boots right into win7 x64. Please tell me i can still boot into my other win7 x86 ? I never backed up some stuff on that side.

View 4 Replies View Related

Boot Error - Status: 0xc000000e Info: The Boot Selection Fails

Nov 27, 2009

I Installed Acronis Disk Director Suite 10.1 yesterday on my Windows 7 and got this problem when it boots up I get the option to choose OS. Windows failed to start. A Recent hardware or software change might be the cause. To fix the problem:

1. Insert your windows installation disc and restart your computer.

2. Choose your langugae settings, and then click next

3. Click "repair your computer."

Status: 0xc000000e

Info: The boot selection failed because a required device is inaccessible.

Then I tried to run the Windows 7 installation disk, I go to the cmd prompt and run the

DISKPART

diskpart

list disk

select Disk X (X=disk where I installed all the OS, should be Disk 0)

list partition

select Partition X (X=partition containing OSX)

Virtual Disk Service error:

The pack is not online

and then i run the Bootrec /ScanOS, it came with 0 identified Windows Installations, this is why I come into the cmd prompt as I could not select the installed OS.

I've tried that from bootable cd to repair the install but the partition of windows7 is not recognized still.

View 0 Replies View Related

Failed Windows 7 Installation And Boot Manager Missing?

Nov 24, 2012

A new hard drive has been installed on my laptop. I tried to install windows 7 and it failed. I am missing the master boot manager. is there free software to fix this problem that I can burn to a dvd or usb flash drive?

View 2 Replies View Related

Factory Reinstallation Failed. "0xc000000e" Error.

Sep 1, 2012

OK so first of all, I had to reinstall my dell inspiron n5010 windows 7. Everything was normal ( I'm not so good at this but I've done it before) till after 30 of important window updates this error occurs. I don't think I did anything wrong. I tried to use the installation disc again to click"repair your computer" but I couldn't find this option. I cant even opnen windows on save mode... please if you can help me I would really appreciate it. I still have the 2 cds for the installation and the "drives and utilities" too.

"Windows Boot Manager:Windows failed to start. A Recent hardware or software change might be the cause. To fix the problem:*

1. Insert your windows installation disc and restart your computer.
2. Choose your language settings, and then click next
3. Click "repair your computer.

"Status: 0xc000000e"

Info: The boot selection failed because a required device is inaccessible."

View 5 Replies View Related

Windows 7 Boot Error 0xc000000e - Required Device Inaccessible

Dec 9, 2012

This morning when I went to run on my windows 7 32-bit installed PC, I was greeted by an error message saying "The boot selection failed because a required device is inaccessible". This is odd because last night it was working perfectly, with no problems. I've tried several solutions, like using the repair CD 3 times, to no avail, as well as writing a new mbr through Linux, using testdisk. I also know the whole hard disk isn't compromised since my Linux dual boot is still working with no problems from its partition.

View 5 Replies View Related

DirectX Installation Failed

Sep 14, 2009

I am trying to install DirectX, but it keeps saying installation failed !

View 9 Replies View Related

Windows 7 64bit SP1 Installation Failed

Nov 18, 2011

Whenever I try to install Windows 7 SP1 it fails. I've searched all over the web to find a fix and nothing has worked. I thought I'd come here since you guys always helped me with other issues.

View 4 Replies View Related

Remove Failed Windows Installation?

Jan 10, 2011

I was trying to install Widows 7 ultimate (32 bit) on Sony VAIO CS-14G laptop. But the installation was a failure. Error occured during process of expansion of packages during setup. Then i restarted and in the boot menu it was showing windows setup. when i entered, it messeged starting windows (like normally it says during starting of windows 7), and then it showed the messege "Setup cannot be completed" and the system restarted. I have following queries (Note: i was not using the dvd during above installation process and i was doing it from setup files copied on a different partition of hard drive. Now,

1. When I inserted the disc, clicked on Install . I got the following error:When i try to use dvd it gives messege "Load Driver: A required CD/DVD drive device driver is missing....."

2. Setup has created a drive called as X:

How do i remove the windows setup files and also from boot menu.

View 5 Replies View Related

Installation Failed - Error 0x80070241

Jan 14, 2009

I have tried installing Windows 7 in Virtual PC and on my HP 2133 netbook. Both halt when in the copy file stage with this error message:

Windows cannot copy files required for installation. The files may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070241 I have downloaded the iso's again (from the Microsoft partner site) in case there was a corrupt download, but I get the same error.

The VPC image was using the ISO directly, and I copied the files from the iso to a usb drive for the netbook install. Anyone else see this?

View 9 Replies View Related

Installation Failed On An Emachines Laptop

Jan 15, 2009

Trying to install on an Emachines laptop. I get the following error:

Specs: 1.6ghz AMD Athlon XP-M, 512mb RAM, Integrated Graphics Card.

Also, I know for a FACT that the DVD works and is perfectly fine. I've used it on other machines before.

View 9 Replies View Related

Silverlight And Office 10 Pro Installation Failed

Mar 27, 2012

I'm having trouble installing Silverlight and Office 10 Pro on my computer. I just reinstalled Win 7 on my HD and had trouble with my drivers updating, aka getting BSOD's. When I try to install these two programs, the installation windows say that the programs as failed to install.

View 5 Replies View Related

Joystick Installation Failed In Windows 7

Oct 9, 2012

i have only usb joystick for my pc. i dont have any drivers.

View 1 Replies View Related

Windows Says Device Driver Installation Failed

Apr 4, 2011

Windows says device driver installation failed for hp laserjet 1012. This despite printer working correctly. Every time on reboot I get this message. How do I stop windows from trying to install driver for a working device???

View 2 Replies View Related

Windows 7 Ultra64 + 4TB RAID0 = Failed Installation

Sep 14, 2010

The BIOS is currently set mostly for defaults/auto except for where I needed to specify RAID for the respective SATA ports connected to the two drives I want to stripe and to boot from CD for Windows 7 installation so I adjusted these settings accordingly.The motherboard has an onboard AMD 890FX based RAID controller. I have two 2TB SATA3 drives configured for RAID0 using the onboard RAID controller software. The RAID controller software reports slightly over 4TB as logical drive #1. Everything seems fine at this point.Next step: Boot from the DVD to install Windows 7 Ultra 64. This attempt is a clean install, full (non-upgrade) version, to be installed onto a 4TB RAID0 array using two brand new HDDs.During the installation I supply the device drivers as specified by the mobo's owner's manual. Windows7 installation accepts them no problem. Suddenly, there is a problem... Instead of showing the available drivespace as just under 4TB, after the RAID hardware driver is supplied the list will then show two partitions, one barely over 3TB and another one roughly 1 TB. It does not show one 4TB drive after the driver has been provided from the mobo's driver CD.If I continue to install on the 3+TB drive anyway, the installation routine seems to go through the usual motions... But then comes up with an error... Something about not being able to prepare the drive for booting and to try to re-run the installation program again. It always ends at the same point with the same errror. I will post the exact error message after I give it another try. I should've written it down already, but it's no problem for me to re-create it.So... If someone posts that Windows 7 cannot be installed on a 4TB partition for whatever reason, like it cannot address over 3+TB of drivespace or other reason, then I can just forget about using the two drives in a RAID0 array and use them as 2 single drives.

View 3 Replies View Related

Failed With Installation Of Visual Studio 2008

Dec 20, 2011

am failed with installation of visual studio 2008......m using window 7...

View 1 Replies View Related

Windows 7 Ultimate Upgrade Failed Installation

Apr 19, 2012

My Windows 7 Ultimate upgrade($220) from Windows Vista Ultimate was 3/4 done judging from the progress bar. Received a command prompt stating that the upgrade failed due to corrupt installation files.On reboot I get a disc read error ctrl alt delete.I receive the same error everytime I ctrl alt delete. Is the disc corrupted by the upgrade?

View 4 Replies View Related

Microsoft Runtime DLL Installer Failed To Complete Installation

Mar 1, 2011

I downloaded the VMware software to my C: drive, and when I clicked the file to open it, it opened to about 90% at which point I got the following error: Setup cannot continue. The Microsoft Runtime DLL installer failed to complete installation.I have Windows 7 and plenty of HD space. I've never had this installation problem before. It seems that Windows 7 has been a lot of trouble since I've bought this laptop; I've encountered numerous problems with software using it, though I don't know if this problem is related to it.

View 14 Replies View Related

Driver Installation For Microsoft Wired Controller Failed?

Sep 10, 2012

Okay, I'm trying to hook this thing up to my new Dell Inspiron 15R. The thing is, when I plug it in, it keeps failing the driver installation. Ok now here is other part. I have used this controller perfectly fine on my previous HP Mini 210. As you know, that's a pretty weak computer compared to the one I just bought.w, after about 2 hours of researching, I've downloaded the current drivers from M$, and that didn't help at all. Next I came across someone who said check the device manager. Okay, so I did a cross examination with both computers and found the netbook had something called "universal serial bus usb controller" drivers with several others branching off while my Dell did not. Also the fact that the Mini uses USB2.0 while the Dell is 3.0.So I've come to the conclusion that my Dell is lacking(and it is) these "Controller" drivers. Now the annoying part is when I use the device manager to search for updates, it says it can't find anything. I've googled around(and used the driver disk that came with my Dell) to no avail.I would greatly appreciate it if anyone could help with my problem. I'm just using the controller for gaming. It works fine in the netbook, so I don't think power to the controller is an issue. My M$ drivers are up to date so I don't think it's those either.

View 1 Replies View Related

Hard Drive With MBR Failed; How To Get Main Installation Working?

Jan 8, 2013

My former hard drive with my MBR on it failed. This hard drive was/is 750GB and when I purchased my 'main' 2TB hard drive I made another fresh install of Windows. In other words, I had two installations of Windows on two separate hard drives. However, the MBR is located on the now-failed 750GB hard drive, and so my 2TB install of Windows won't work. I have tried (and failed) at repairing or otherwise installing a new MBR on the 2TB hard drive.

View 10 Replies View Related

Windows 7 Not Genuine - Update Installation Failed / Error Information 0x800B0001

Sep 4, 2011

I bought my computer from best buy a couple of days ago and I recently got a message saying that my version of windows is not genuine. When I try to run the windows activation update it gives me "Update installation failed. Error information - 0x800B0001" and I still get the message that my windows is not genuine.

View 12 Replies View Related

"Final Result: Installation Failed With Error Code: (0x80070643)

Jan 1, 2012

I am trying to install Microsoft Network Framework v.4 (x64) and I keep getting error "Final Result: Installation failed with error code: (0x80070643), "Fatal error during installation" (Elapsed time: 0 00:01:01)." The exact log file is attached: Code: OS Version Information:

OS Version = 6.1.7601, Platform 2, Service Pack 1
OS Description = Windows 7 - x64 Ultimate Edition Service Pack 1
OS Version Information

[code].....

View 3 Replies View Related

Old XP Failed Boot Causing Error On Boot

Jun 8, 2012

I upgraded to Win 7 Ultimate from Win XP Pro after my OEM disk picked up a few more scratches than it needed.During a re-installation it partially installed the windows XP setup with an error message of 'HAL.DLL' missing.I believe the residual setup loader is causing problemS.My PC insists on trying to boot from CD/DVD regardless of what I select.If I select boot from CD/DVD with my new Windows 7 disk I get the SAME message as if I didn't select boot from DC/DVD: Windows failed to start. This could be from a recent hardware or software change.

1.Please insert your windows install disk and click restart
2.Change language setting and click next.
3.Click repair... etc.

If you don't have the disk contact admin....ect.

File$LDR$
Status 0xc000000f
info: Selected entry not added/ application is missing or corrupt.
Enter Escape.
Escape = reboot to error listed above...
Enter = OS choice menu with:

1. 'windows 7'
2 'older verion of windows'

I select the ' older version' and the system gives me the same listed above error...I select 'windows 7' and, well.... here I am, posting this thread from my PC, Windows 7, updated, gageted and all running smoothly...Hibernate sometimes boots and sometimes shows the same error.....Start menu 'Shut down' and 'Restart' also don't work on the odd occasion....I researched and downloaded EasyBCD to delete the 'older version of windows' but it appears to have only 'deleted' it from Windows 7's 'eyes' because ultimately the thing is still showing on my OS choice menu and is evidently causing a few hiccups.

View 1 Replies View Related

Dual Boot Hdd Failed Windows 7 Won't Boot

Mar 10, 2012

I had Win XP on 1 HDD & installed Win 7 on a different HDD. I think I accidentally did a dual boot install because Win 7 won't boot without the the XP disk connected to the motherboard.

That was fine until my XP drive died yesterday. Now Win 7 won't boot. The first time I tried to repair, Win 7 was not even seen. so I booted into diskpart and made the partition active. Now it could be seen as an OS.

Then I did a startup repair. It did whatever it does & when it was finished I restarted the pc but it didn't boot I went back to diskpart and confirmed the partition was active. I went back startup repair and tried again.

This time it said it could not detect a problem, but it still will not boot. What else can I do? My pc is homebuilt. Right now I have the 1 sata drive, 2.53 ghz cpu, 4gb ram, onboard video & sound

View 5 Replies View Related

*ERROR 0xc000000e* - PC Crashes After 30 Mins Or So?

Jun 26, 2012

Recently I came home to find my pc on this black screen with a few things on it such as-"Windows failed to start, this could be due to a recent software or hardware change"-"a required boot device was inaccessible"-"error 0xc000000e"Now my pc consistently crashed after running fine for roughly 30-40mins. I researched this error but most people say they cant boot at all and repairing Windows solved it.Well I can boot, so finding a answer to my problem has been difficult.So far, I've tried repairing Windows and also re-installing Windows, just to make sure it isn't OS or driver related.

View 13 Replies View Related

0xc000000e Caused By Media Drive

May 8, 2010

I couldn't boot because I was getting a 0xc000000e error when I tried. I then got a new psu, cpu, mobo, and ram. I reformatted my hard drive, and did a fresh install and everything went well. It then restarted to finish the installation and I get the error again. I unplug my 2nd hard drive (with all my music, movies, games etc.) and it boots fine. I'm confused how a hard drive that has never had an OS on it can cause boot errors. I booted into ubuntu before my upgrade and copied things off the media drive fine so I don't think the drive is bad.

specs:
4gigs ddr3 ripjaws
phenom II x4 955 black edition
Corsaid CMPSU-650TX
Gigabyte GA-770TA-UD3
radeon 4870 1gig

View 4 Replies View Related

BSOD: Error 0xc000000e Among Others. Can Only Access Safe Mode?

Nov 6, 2012

Last thing I did on my laptop was download baseball team logos a couple days previous to problems.. Use mobile hotspot for internet and this is not working in SafeMode. These are the lap top specs, and can provide more if needed: [CODE]

View 9 Replies View Related

[DESKTOP] Failed Boot?

Mar 14, 2011

I am running a desktop with Windows 7 Pro 32-bit. When I first power it on the normal BIOS posts and then Starting Windows just hangs, no 4 colored orbs that turn into the Windows logo. I can hit the reset button and it boots and runs fine. I have tried the Launch Startup Repair after the reset button but doesn't seam to do anything

View 1 Replies View Related

HDD Bios Boot Failed

Feb 13, 2013

I've recently purchased a used A665-3DV6 Toshiba Satellite Laptop. It had the BIOS password problem. So I've jumped the CMOS and cleared the password. I've initiated the "out of box state" and it went through the whole process. When it was finished I shut down the computer. Then the next morning I booted the computer up and it stated "HDD Boot Failed". I tried running Factory reset again but there is only a blinking cursor on the top left hand corner of the screen.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved