Factory Reinstallation Failed. "0xc000000e" Error.
Sep 1, 2012
OK so first of all, I had to reinstall my dell inspiron n5010 windows 7. Everything was normal ( I'm not so good at this but I've done it before) till after 30 of important window updates this error occurs. I don't think I did anything wrong. I tried to use the installation disc again to click"repair your computer" but I couldn't find this option. I cant even opnen windows on save mode... please if you can help me I would really appreciate it. I still have the 2 cds for the installation and the "drives and utilities" too.
"Windows Boot Manager:Windows failed to start. A Recent hardware or software change might be the cause. To fix the problem:*
1. Insert your windows installation disc and restart your computer.
2. Choose your language settings, and then click next
3. Click "repair your computer.
"Status: 0xc000000e"
Info: The boot selection failed because a required device is inaccessible."
View 5 Replies
ADVERTISEMENT
Aug 10, 2012
Okay, so this just happened out of nowhere. Nothing seems to have led up to this -- the system booted and shut down successfully, and no software updates or installs were done during the period of time it was on when it was last working. I've attempted many things, but none seem to work. /ScanOs reports no OS detected, while startup repair said the OS was booted successfully. bcdedit also shows no directories linked to "unknown". CHKDSK reports no bad sectors, so such can be discarded. This happens every time I attempt to boot to Windows 7 (Home Edition, x64). I have a copy of Fedora 17 set to dualboot with it
View 14 Replies
View Related
Sep 13, 2012
I have an Intel i5, Windows 7 Ultimate, and SSD main and 2 HDs SATA. One day, blue screen BSOD appeared and Pc is restarted. Then appears the following error: Window failed to start. A recent hardware or software change might be the cause.
View 1 Replies
View Related
Feb 10, 2013
I just bought a new Lenovo T430s and a Samsung 840 Pro SSD. Cloned the system by using Norton Ghost (First cloned the hidden disk, then Windows 7 disk) as the manual (Samsung 830 manual) said. Then put the HDD out and put the SSD in. However, the windows failed to bootWindows failed to start. A recent hardware or software change might be the cause. To fix... Status: 0xc000000e Info: The boot selection failed because a required device is inaccessible. I checked the internet and just could understand some basic operations. For example, I entered into bios and saw SATA Controller Mode option [AHCI] Did not find any "Storage config" option... in the main menu. Also, I pressed F12 to the boot menu and selected Samsung 840 Pro but still no work.
View 2 Replies
View Related
Jun 26, 2012
Recently I came home to find my pc on this black screen with a few things on it such as-"Windows failed to start, this could be due to a recent software or hardware change"-"a required boot device was inaccessible"-"error 0xc000000e"Now my pc consistently crashed after running fine for roughly 30-40mins. I researched this error but most people say they cant boot at all and repairing Windows solved it.Well I can boot, so finding a answer to my problem has been difficult.So far, I've tried repairing Windows and also re-installing Windows, just to make sure it isn't OS or driver related.
View 13 Replies
View Related
Nov 6, 2012
Last thing I did on my laptop was download baseball team logos a couple days previous to problems.. Use mobile hotspot for internet and this is not working in SafeMode. These are the lap top specs, and can provide more if needed: [CODE]
View 9 Replies
View Related
Dec 9, 2012
This morning when I went to run on my windows 7 32-bit installed PC, I was greeted by an error message saying "The boot selection failed because a required device is inaccessible". This is odd because last night it was working perfectly, with no problems. I've tried several solutions, like using the repair CD 3 times, to no avail, as well as writing a new mbr through Linux, using testdisk. I also know the whole hard disk isn't compromised since my Linux dual boot is still working with no problems from its partition.
View 5 Replies
View Related
Jun 5, 2012
I downloaded windows 8 consumure preview and I wanted to reinstall windows 7 so I get my windows 7 disk and hit reinstall. When it was about 70% done and it freezes then it crashes I turn it back on and a loop hole appears and it saids this message "the computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install windows, click ok to restart the computer, and then restart installation". I hit ok. It restarts and the same message pops up.
View 1 Replies
View Related
Mar 9, 2012
have a Packard Bell Ixtreme M5722 thats running windows 7 64 bit home premium I was advised by packard bell to do a factory restore which failed half way through with error code 1392 file system currupt. Ever since then i've been unable to start up windows. I have used a Windows 7 recovery cd that lets me into command prompt but when i run sfc /scannow it just says "there is a system repair pending which requires reboot to complete" Obviously I can't reboot as it won't let me into windows at all. The recovery Essentials tools (windows 7 64-Bit Edition) doesn't work no restore point identified on computer and i don't have a recovery disk to use (I know i should have a backup disk but recently moved and lost my cd i created in move
View 4 Replies
View Related
Dec 28, 2012
When i started my laptop..the system went to startup repair mode..the startup repair mode did not worked n i went to ''restore to factory setting ''.Now the main problem arised.The factory setting later asked to reboot the system .the system failed to reboot.it gave the msg as ''bootMGR file '' missing.I was told by a local tech to use operating cd to repair the laptop.Now wat i saw the hard disk partion failed to That is before it was C:drive 50 gb & D: drive 450 gb.Now it was C:drive 498 gb & D: drive 1.98 gb,Which means i have lost all my important data which was in my hard disk .Is there no way for the data recovery.How come ''restore to factory setting failed ''?
View 3 Replies
View Related
Jan 1, 2013
I tried restoring the computer to factory settings but after restoring and backing up the computer restarted and it wont go further than the startup page ..there's this error in 'setting up the services to install' windows it says to restart to continue installing windows...
View 2 Replies
View Related
Nov 27, 2009
I Installed Acronis Disk Director Suite 10.1 yesterday on my Windows 7 and got this problem when it boots up I get the option to choose OS. Windows failed to start. A Recent hardware or software change might be the cause. To fix the problem:
1. Insert your windows installation disc and restart your computer.
2. Choose your langugae settings, and then click next
3. Click "repair your computer."
Status: 0xc000000e
Info: The boot selection failed because a required device is inaccessible.
Then I tried to run the Windows 7 installation disk, I go to the cmd prompt and run the
DISKPART
diskpart
list disk
select Disk X (X=disk where I installed all the OS, should be Disk 0)
list partition
select Partition X (X=partition containing OSX)
Virtual Disk Service error:
The pack is not online
and then i run the Bootrec /ScanOS, it came with 0 identified Windows Installations, this is why I come into the cmd prompt as I could not select the installed OS.
I've tried that from bootable cd to repair the install but the partition of windows7 is not recognized still.
View 0 Replies
View Related
Dec 27, 2011
I have an Acer Aspire AX3400 desktop running Windows 7 64bit. I have been having all sorts of problems over several months. The machine, when left unattended, appears to be always "recovering from serious error" with subsequent memory dumps. The machine would not shut down without me having to switch it off. Subsequently the machine would not start up properly. iTunes would not open without a reboot etc etc etc.I decided to backup all my data and restore to factory settings. This has failed/ is incomplete. It hung for several hours at different stages of the process. I keep getting the message "Setting up PC for first use" and does not move on from there
View 8 Replies
View Related
May 8, 2010
I couldn't boot because I was getting a 0xc000000e error when I tried. I then got a new psu, cpu, mobo, and ram. I reformatted my hard drive, and did a fresh install and everything went well. It then restarted to finish the installation and I get the error again. I unplug my 2nd hard drive (with all my music, movies, games etc.) and it boots fine. I'm confused how a hard drive that has never had an OS on it can cause boot errors. I booted into ubuntu before my upgrade and copied things off the media drive fine so I don't think the drive is bad.
specs:
4gigs ddr3 ripjaws
phenom II x4 955 black edition
Corsaid CMPSU-650TX
Gigabyte GA-770TA-UD3
radeon 4870 1gig
View 4 Replies
View Related
Oct 6, 2012
Recently I got malware on my computer and it has been reeking havoc! I got my ET1331g-05w from Walmart about 2 years ago, and it did not come with a boot disk out of the box (Had a chance to make one then but didn't...) I have backed up all my files and have been trying to do a Factory Reset but can't seem to get it to work. The Malware has made it so I cannot do a System Restore to an earlier date...
When I try to use the Emachine Recovery Management tools, the second I hit the "Completely Restore System to Factory Default" button I get a pop-up stating "Hard drive configuration is not set to the factory default. Restore aborted"...
When I try rebooting and hit Alt + F10 at the Manufacturers Logo it starts loading the System Recovery Tool, but stops and gives an error message stating "Napp_KM: napp7.exe error" and has error code: 0X 10054162 and prompts me to Abort...
I can't seem to find a boot-able Emachine Windows 7 downloadable disk anywhere. I should note the computer is for the most part fully functional but slower than snot, and video game and video playback has become very choppy if not usable at all!
I really don't want to go spend $100-$200 to get a new copy of Windows 7, I just want to get this dang thing reset to Factory Configuration.
View 3 Replies
View Related
Sep 5, 2012
I have an HP Pavilion laptop and used recovery manager to do an image factory restore. Upon reboot it brings up the following message:
Please wait:
updrvltr:unknown
x:windowssystem32
It wants me to enter something at the command prompt. What I need to do?
View 29 Replies
View Related
May 12, 2009
What happened: At the very end of installing RC Windows 7, I got a "failed to upgrade" message, and then it said my system would automatically revert back to Vista, which it did (thankfully).
I have already uninstalled Windows OneCare (virus protection). However, when Windows 7 was installing, my Spyware Doctor opened up and I had to click "yes" on it for the Spyware Doctor box to go away. Do you think that could have caused the upgrade to fail? I had turned off Spyware Doctor, but I'm thinking I should uninstall it before trying Windows 7 again. What do you all think?
View 1 Replies
View Related
Jun 25, 2012
I recently restored my computer to factory settings after getting many blue screen messages. I thought that restoring the laptop to factory settings would help to fix whatever the problem was. After restoring my computer, I get a message saying 'Setup is starting services', and then a pop up saying 'Windows could not complete the installation.To install Windows on this computer, restart the installation.'
View 5 Replies
View Related
Jan 2, 2013
cannot rebo my acer aspire 5733. I ress tef8 uton ontinusl The menu comes upbt NO Repaiy computer
View 1 Replies
View Related
Sep 18, 2012
Let me start by saying that I'm a neophite when it comes to issuses of anything other than turning the computer on. It appears to me that when a Microsoft update was installed it obviously changed something. I keep getting an error message that reads:[CODE]
View 1 Replies
View Related
Jan 14, 2009
I have tried installing Windows 7 in Virtual PC and on my HP 2133 netbook. Both halt when in the copy file stage with this error message:
Windows cannot copy files required for installation. The files may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070241 I have downloaded the iso's again (from the Microsoft partner site) in case there was a corrupt download, but I get the same error.
The VPC image was using the ISO directly, and I copied the files from the iso to a usb drive for the netbook install. Anyone else see this?
View 9 Replies
View Related
Jan 18, 2011
I'm trying to restore my system with recovery cd. The system disc takes but when I put in the first recovery disc it stops and says Restore failed - Error code=1005(the volume does not catain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupted.)
View 2 Replies
View Related
Mar 23, 2011
I am trying to install printer from network but it gives operation failed with error 0x000003e3.
View 1 Replies
View Related
Dec 1, 2009
only when playing solitare on a new dell laptop, if I let the game sit for a couple min without playing an error pops up saying "failed to create directx" can anyone help me out here?
View 1 Replies
View Related
Jul 26, 2011
I've worked as a PC tech for the last year and a half at a local joint here in College Station, TX and BC has been a wonderful resource in the past for me. To date, I haven't needed to ask questions directly; unfortunately, this latest one has stumped me. I have done my best to peruse the forum for previous topics of this nature and have found nothing. I realize it's a pain to answer the same thing twice so please feel free to redirect me if you found something I didn't.Unlike most problems for which I've sought help on BC, this one is personal. I'm trying to reinstall Windows 7 on my laptop but I'm running into some problems. First, I've run MEMTEST and HDD checks and everything checks out. Second, the full OS installation history was (OEM) 32-bit Vista, 32-bit Windows 7, and 64-bit Windows 7 (currently, or more appropriately formerly as I've already reformatted the hard drive).
I'd like to install Windows x86 on this machine as I've recently purchased a new performance laptop on which I have x64 Win7 installed. Before you protest, the laptop I'm asking about only has 2 GB RAM so there's no point in having x64 installed (and in fact it causes a lot of compatibility problems for legacy programs; yes, I installed Virtual Machine w/ XP but the graphics card doesn't carry over so I can't run the programs I need). Unfortunately, every time I try to boot to the DVD with Win7 x86 on it, it loads the files, shows the "Starting Windows..." splash screen, and then BSODs. The error? "c000021a"I've put a x64 Win7 disc in and it doesn't have this error at all. Any idea what might be causing this? I'm emarrassed to ask since I should know these things as a tech but I'm at my wits end here. Google hasn't been kind to me and I'm about ready to give up
View 4 Replies
View Related
Mar 5, 2009
Just one question : Is it possible to reinstall an Operating System like Vista or 7 with an image DVD downloaded from internet and activated with the CD Key from the computer that was bought with that license.
Ex : Windows Vista Home Premium (english) - Image downloaded from Internet
Windows Vista Home Premium (english) - License, product CD key bought with the computer.
View 9 Replies
View Related
Mar 29, 2012
I have a hp 4 month old laptop. I used it yesterday, turned it off, when I turned it back on 4 hours later, it gave me a message that it needed to do a chkdisk, so it ran that, then started in what looks like safemode. It gave me an error message that says "Windows Socket Initialization Failed". I did a little research and tried to do a system restore, there are no restore points found. It will not connect to the internet, it also give me a message that it cannot connect to the windows service.
View 1 Replies
View Related
Jan 22, 2012
Trying to restore Emachine E28 laptop.After last install disk runs I receive the following message:Restore failed. Error code = 045 (WIM ApplyImage cannot apply image. the request could not be performed because of an I/O device error.)Have tried almost everything I can think of but no results.
View 5 Replies
View Related
Nov 22, 2012
Below error has been keep popping in Windows 7 Event Viewer whenever I bootup my system, I had even format my system drive and it still happening.I also have observed that now my PC took a little while more to load.The WinRing0_1_2_0 service failed to start due to the following error:The system cannot find the file specified.Attached is the screenshot of the error.
View 14 Replies
View Related
May 23, 2012
After I downloaded some windows 7 updates I now get this error:[URL]
- When I turn the computer on windows takes a long time to load, about 5 times longer than usual
- My keyboard now does not work (tried others to be sure)
- I have no internet now (this is related to the error, I have read other cases)
The first thing I wanted to try was the winsock reset, but I do not have a keyboard to type with in the command prompt.I have:
OS: Windows 7 home premium 64bit
MOBO: AsRock z77 Pro4-M
View 3 Replies
View Related
Nov 7, 2012
(I was going to post this in the software section, but I assumed since it pertains to the network portion of the application and that I can connect through a VPN, that the problem is LAN Network oriented)I recently installed the software Raidcall (RaidCall-100% FREE Group Communication Software- IM, Group Communication and Voice Chat) which is a program designed to be a cross between Skype and Ventrilo. I avidly registered and the process went smoothly. That was all until I came up to login screen where after entering my information, I got the following error: Connection Failed. please try again later (Error code:23). Does this have something to do with Cyclic Redundancy Checking? That's the only information I could come up with. I've done as much research as I can think of, sent them an email with lots of information (no response as to the answer yet), and also asked on their forums but no dice.
Background information (I can provide more if needed)
- On a University Campus ( Technical Information | IT | Indiana Wesleyan University )
-I"m connected directly through to their wall. I"ve also tried swapping out my own cables to no avail.
- Have done an Error Checking Check for both drives (for CYC relation - which I think it may be the culprit (I"m not tech savy though hence my forum post)
- I CAN connect to it through a VPN (Hotshield) - obviously I don't want to have this be my way of connecting through it because I want to use Raidcall while playing (World of Warcraft) and it gives me horrible latency.
- I've called my IT support here at school, and they didn't think it would be something on their end. Although the guy on the other end did not sound intelligible at all.
View 2 Replies
View Related
