Windows 8 Factory Setting Failed Cannot Reboot

Dec 28, 2012

When i started my laptop..the system went to startup repair mode..the startup repair mode did not worked n i went to ''restore to factory setting ''.Now the main problem arised.The factory setting later asked to reboot the system .the system failed to reboot.it gave the msg as ''bootMGR file '' missing.I was told by a local tech to use operating cd to repair the laptop.Now wat i saw the hard disk partion failed to That is before it was C:drive 50 gb & D: drive 450 gb.Now it was C:drive 498 gb & D: drive 1.98 gb,Which means i have lost all my important data which was in my hard disk .Is there no way for the data recovery.How come ''restore to factory setting failed ''?

View 3 Replies


ADVERTISEMENT

How To Restore Windows 7 To Factory Setting

Sep 12, 2010

I have a Toshiba A505-S6040 with Windows 7 X64 and i need to restore it to factory setting but I do not how to do so!

View 7 Replies View Related

Inspiron N7110 Windows 7 Needs Reset To Factory Setting?

Nov 27, 2011

Its a laptop. Bluescreen shows up for split second so I can't see the error code. I tried pressing Ctrl + F11 during boot but didn't work. Any another thing I can try before I throw it out? Don't say 'contact Dell'.

View 3 Replies View Related

Reset Back To Factory Setting But Now Windows 7 Won't Restart Normally?

Dec 20, 2012

i tried to reset back to factory setting but now windows 7 won't restart normally can i get a cd to reinstall it?

View 1 Replies View Related

Restore To Factory Setting

Dec 31, 2011

i was havin probs with my pc DELL isnpiron 17R ,,it was about missing of some storage drivers ,, i contacted a dell agent ; after he viewed the device manger and trying to reinstall them he couldn't and he told me that i've ghost or something in my registery and i need to do a restore to factory settings..i tried to shut down pc and turn it on again then i pushed the F8 button and i choosed " Repair Your Computer " and then i got " windows loading files " ,, stuck on it ,,,i tried to restart the pc and do it again but nothing i tried to remove battery and placed it again and retry but nothing i stucked on the same page.i used registry boost program on this site ,, after scan ,, i had a high damaged registery.

View 5 Replies View Related

How To Restore Factory Setting

Dec 13, 2012

It was working great and I noticed that it would not recognize an external drive I was going to install some progs from, even though I can go in to Admin Tools and see it there, and then I tried taking it online and it says Windows Explorer not responding all the time, so I think the best bet at this point is to restore it back to out of the box condition.I just started tweaking on it, so it's not like I'll be losing much work.

View 9 Replies View Related

How To Restore To Factory Setting

Jan 30, 2013

im trying to restore my X51 to its factory state so when the SYSTEM RECOVERY OPTIONS comes up there is no alienrespawn or Dell DataSafe Restore and Emergency Backup, Iv gave it a shot from alienrespawn app when i click on restore its says that it will restore to Orginal factory state so restart after that the SYSTEM RECOVERY.

View 3 Replies View Related

Setting Back To Factory Settings?

Aug 17, 2012

but can't seem to find the right post. I want to set my PC Dell Inspiron 560 Windows 7, back to the factory settings as I just bought a new one and I'm selling this one.I have the CDs to do this, but when it comes on the screen, there is so much "jumble" on the screen, and I have no clue what it means, or what to do. I hit f12, when the Dell logo appears. Is there an easier way to do this, or can someone explain what I do, I am totally clueless on this.

View 4 Replies View Related

How To Set Laptop Back To Factory Setting

Oct 10, 2012

I'm on a lenovo v570 and it didn't come with a windows 7 disc how do i set it back to factory setting without the disc i can't find where to order one

View 3 Replies View Related

Take Computer Back To Factory Setting?

Oct 13, 2011

How do I take my computer to factory settings so I can make a recovery cd?

View 1 Replies View Related

Recovery Of Laptop To Its Factory Setting?

Feb 17, 2013

i want to recover my laptop to its factory setting but i lost all recovery data from my laptop?

View 2 Replies View Related

Alienrespawn Can't Find Anymore Factory Setting

Jan 10, 2012

I want to restore my Alienware R-2 to its factory setting. Here's the problem I have:

1. Alienrespawn can't find anymore my factory setting since I already have formated with the window 7 disc.
2. When I push F8 on startup, the option RESET TO FACTORY STATE is not available in repair option.
3. The Factory image is STILL on my hard drive in a separated partition.I can even explore it.

How can I have access to this image and recover my computer with it. So far, alienrespawn can't find it automaticaly.On startup, I do not have the option anymore.

View 4 Replies View Related

Restore Factory Setting In Toshiba Nb305?

May 25, 2012

have formatted my hard disk and made partition in it to install new windows 7 professional now i cannot find the system recovery to go back to the factory setting status. Unfortunately i couldnt made the system recovery disk before installing the new windows.

View 4 Replies View Related

Restore Computer Back To Factory Setting?

Oct 18, 2011

how do i restore my computer back to factory setting.

View 1 Replies View Related

How To Restore An Aspire 5742G To Factory Setting

Apr 14, 2012

how can i restore my acer aspire 5742G to factory settling

View 1 Replies View Related

Nokia Netbook Factory Setting Password

Apr 18, 2012

It is my netbook. I bought it from a nonprofit in Greenlake so I could attend Edmonds Community College.I had to reset to factory settings after Security Essentials prompted me to during an WIFI session.Now, it won't recognize my password. What can I do? It's a valuable netbook and I need it for my desperate job search.I can prove I have good character and am not breaking any rules. My profile is on LinkedIn, WorkSource, and I have social networking sites, too.

View 4 Replies View Related

Factory Setting System Restore Computer Very Slow?

Sep 17, 2012

I recently did a system restore to factory settings and now my computer is running very slow. I have done all the windows updates and checked for any updates on the drivers. I also defraged it. I noticed that the physical memory is always very high between 85 and 100. The CPU is 10-50.

View 5 Replies View Related

Acer Aspire 5332 / Take It Back To Factory Setting?

Feb 27, 2012

acer aspire 5332 how do you take it back to factory setting.

View 1 Replies View Related

Unable To Load The Factory Setting From The Recovery Disks?

Apr 10, 2012

i am using acer 5745g, when i tried to use the recovery disks created earlier, it is unable to load even i tried everything from the boot menu..

View 1 Replies View Related

Restore To Factory Setting Dell Mini Ispiron?

Feb 1, 2013

previous owner died. Did not leave administrator password behind.i understand I will lose all the photos, etc. That is fine

View 3 Replies View Related

Setting Up SSD Causes Reboot Cycle

Nov 28, 2012

[URL]

I want to set up an SSD and move the OS over to it. When I initially tried I got the error message that guy had: 'windows can not be installed to this disk.' I've got an ASRock Z68 Extreme4 MB and Im trying to put in a SanDisk Extreme 120GB SSD (extreme enough for you?). I initially had my SSD plugged into a Marvell socket, same as the other guy, which is when I found that thread. I switched the Sata cables around so I had

SATA3_0: New SSD
SATA3_1: Old HDD
SATA2_2: TSSTcorp CDDVDW SH-222 ATAPI
SATA2_3: Not Detected
SATA2_4: Not Detected
SATA2_5: Not Detected

and then switched SATA mode to AHCI and enabled SMART. However, when I saved these changes and went back into a normal bootup, I got into a reboot cycle. I would get to the 'starting windows' screen and stay on it for 5 or 10 secs, then my computer would reboot. I tried tinkering around with some BIOS options, but I couldnt get anything to work. Eventually I unplugged my SSD and plugged my HDD into its original spot. I also went back to IDE and turned off SMART. Now it seems like everything works fine, but my SSD still isnt set up. How can I fix this?

Edit: After some more testing I found that having the SSD plugged into where the HDD used to be and plugging the HDD into a new spot was fine (this is the arrangement I wish to end up with). When I enable SMART it works fine too, but when I turn on AHCI I get into the reboot cycle. I also noticed that right before my computer reboots I get a blue screen for a split second - not enough time to read anything.

View 2 Replies View Related

Backing Up Files And Setting Laptop Back To Factory Condition

Jan 2, 2012

I have taken many computers back to factory condition and never had any problems. This time, after backing up all my files to disc (15), in total, I have taken this HP laptop back to factory condition. There is no problem there. The restore is fine but I cant seem to load the discs I created. I have turned off the laptop completely, as directed and started it again with the alt f10 keys, which should automatically load my back up but nothing is happening and if I try to open the discs on their own, I get an error message saying that the path isn't there. I have already re-installed my various purchased software but it is the photos and personal files that I particularly want to get back. I have my own photos safely in a box but these photos belonged to someone else

View 9 Replies View Related

Deleting Program Files (x86) To Install Recovery-DVD To Factory Setting?

Nov 4, 2012

I was trying to restore the computer the FIRST TIME I got it, but I've found out that the Recovery copy won't make any changes because I have two(2) Program Files for Internet Explorer, one is for 64bit OS, and the other is 32bit (x86).I've tried to enter in the command prompt: takeown /f "C:Program Files (x86)" /r /d n and it displays ERROR: The current logged on user does not have ownership privileges on the file (or folder) "C:Program Files (x86)". But I am the administrator and the owner of this Hitachi Laptop Windows 7 Home Premium, 64-bit OS.I could not play any movies via internet, and I don't know what plug-ins are missing, so I want to restore the computer to its Factory setting.

View 6 Replies View Related

UAC Returns To Highest Setting On Almost Every Reboot

Dec 27, 2009

I usually keep it on the 2nd notch but every time I restart the PC, UAC goes back to the highest setting.

I'm running Windows 7 Ultimate x64 and I did an upgrade from Vista Ultimate x64

Any ideas?

View 6 Replies View Related

Factory Settings Restore Failed?

Mar 9, 2012

have a Packard Bell Ixtreme M5722 thats running windows 7 64 bit home premium I was advised by packard bell to do a factory restore which failed half way through with error code 1392 file system currupt. Ever since then i've been unable to start up windows. I have used a Windows 7 recovery cd that lets me into command prompt but when i run sfc /scannow it just says "there is a system repair pending which requires reboot to complete" Obviously I can't reboot as it won't let me into windows at all. The recovery Essentials tools (windows 7 64-Bit Edition) doesn't work no restore point identified on computer and i don't have a recovery disk to use (I know i should have a backup disk but recently moved and lost my cd i created in move

View 4 Replies View Related

System Restore To Factory Settings Failed?

Jan 1, 2013

I tried restoring the computer to factory settings but after restoring and backing up the computer restarted and it wont go further than the startup page ..there's this error in 'setting up the services to install' windows it says to restart to continue installing windows...

View 2 Replies View Related

Reboot Or Factory Reset On Acer Aspire One Notebook?

Jun 3, 2011

tried to reset my acer aspire one notbook to factory direct setting ,while doing so it failed n wont restart now it asking for windows installation disc ,which i dont have neither does the notebook carry a disc.

View 1 Replies View Related

Lost Admin Account After Reboot, After Changing Setting In Lusrmgr?

Aug 18, 2012

I lost my main user account, after rebooting machine, I did change a setting while in lusrmgr...[netplwiz]. now the lost account shows the name but no full name and/or description in snapin. I am left with just a guest account in Homegroup Users.

View 8 Replies View Related

Acer Aspire Desktop Failed To Restore Factory Settings?

Dec 27, 2011

I have an Acer Aspire AX3400 desktop running Windows 7 64bit. I have been having all sorts of problems over several months. The machine, when left unattended, appears to be always "recovering from serious error" with subsequent memory dumps. The machine would not shut down without me having to switch it off. Subsequently the machine would not start up properly. iTunes would not open without a reboot etc etc etc.I decided to backup all my data and restore to factory settings. This has failed/ is incomplete. It hung for several hours at different stages of the process. I keep getting the message "Setting up PC for first use" and does not move on from there

View 8 Replies View Related

When Reboot, The Screen Eventually Goes To A Black Screen Saying "Windows 7 Failed To Start?

May 12, 2012

My wife did something on her PC (she doesn't know exactly for sure what & can't explain it completely me), and now she can't boot up her PC. She says it had something to do with changing the security settings for a program she uses a lot so it wouldn't keep asking her if she wanted to launch it, and that's when it told her to restart the PC, then it wouldn't boot up anymore.When you reboot, the screen eventually goes to a black screen saying "Windows failed to start. A software or hardware error may be the cause" or something to that effect. It offers me the option to "Launch Startup Repair" or "Start Windows Normally".If I Launch Startup Repair, nothing much happens --- it says it's adding files, then it looks like Windows is about to boot up, then it goes to a black screen for a long time & nothing happens.

If I choose Start Windows Normally, it simply reboots & eventually brings me back to the same screen again.I've tried using rebooting and selecting ESC to get to the boot menu, then installing the Win 7 installation disc & selecting the DVD drive, then I select thelanguage, then I click Repair, but it sits there forever with nothing happening.I also tried an outside boot disc I found on the web & it doesn't launch.

View 9 Replies View Related

Factory Reinstallation Failed. "0xc000000e" Error.

Sep 1, 2012

OK so first of all, I had to reinstall my dell inspiron n5010 windows 7. Everything was normal ( I'm not so good at this but I've done it before) till after 30 of important window updates this error occurs. I don't think I did anything wrong. I tried to use the installation disc again to click"repair your computer" but I couldn't find this option. I cant even opnen windows on save mode... please if you can help me I would really appreciate it. I still have the 2 cds for the installation and the "drives and utilities" too.

"Windows Boot Manager:Windows failed to start. A Recent hardware or software change might be the cause. To fix the problem:*

1. Insert your windows installation disc and restart your computer.
2. Choose your language settings, and then click next
3. Click "repair your computer.

"Status: 0xc000000e"

Info: The boot selection failed because a required device is inaccessible."

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved