I'm trying to restore my system with recovery cd. The system disc takes but when I put in the first recovery disc it stops and says Restore failed - Error code=1005(the volume does not catain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupted.)
View 2 RepliesI'm trying to restore Windows 7 on my computer (I'm currently using Ubuntu 11.10), and I keep getting Error Code 1005. I've tried everything, and nothing.
View 1 Replies View RelatedSo when I leave my computer it goes into hibernation mode, how ever when I come back it acts like its loading and then the POST comes up after that it says: "Your computer can't come out of hibernation.
Status: 0xc0000411
Info:A fatal error occurred processing the restoration data.
File: hiberfil.sys
Any information that was not saved before the computer went into hibernation will be lost."It does this ever time it goes into hibernation, I disabled it and I have no problems now but I want my computer to hibernate because I leave it on all day long and it will wear components out faster and waste power.I have tried updating all the drivers and hardware drivers from the website for the HD but nothing helped.
i installed windows 7 beta build 7000 but my problem that the HP laserjet 1005 printer drivers was not installed and can not be seen
i used it in vista and there was no problem
plz any help??
I have an Eee PC Win 7 Starter with no sound.downloaded and installed the Realtek audio driver from ASUS support stopped and started the Windows audio service- It had been running allowed windows to troubleshoot- says no audio device installed.
View 2 Replies View RelatedI had some files related to my office stored on my computer which i deleted. I want to restore those files back. Is there any way to get back the files on my computer drive.
View 3 Replies View Relatedafter going through a lot of stress today to fix a certain problem (irrelevant tho') and installed & uninstalled a lot of stuff, I wanted to recover the system to atleast yesterday. But the latest restoration point is today around 7h ago.Is there no way at all to restore the system to yesterday or any day ago? The "error" accured when I shut down my computer yesterday and Windows automatically updatedToday I started the PC and yeah..If there is no other possible way to restore I will explain the problem.
View 5 Replies View RelatedI had two os partion. C for windows 7 and D for xp. first installed xp on D drive. Then installed windows 7 on C drive. But after installing windows 7 i can't see xp boot option in the boot manager. The system itself is booting into windows 7 only. How can i restore the xp boot options In the windows 7 boot manager.
View 9 Replies View RelatedWhen I lost my internet connection I tried to uninstall my wireless program to re-install it. The windows installer wouldn't uninstall so I loaded files from the computers internal restoration disk to repair some old files. Now my computers not working at all. It won't boot up to install the restoration files. It might tell pop in a restoration disk and then say it can't boot up from a dvd drive. How do I boot up my computer and install the new system?
View 1 Replies View RelatedI recently had some problems with my computer and I ended up restoring the computer to its original factory settings. I chose the option of restoring it while keeping user files and what not. Anyways everything was going well up to this point. The screen has been stuck on "Setup is starting up services" (with that loading bar underneath the text) all night.
I'm pretty sure I did everything right. I unplugged everything, except the keyboard, monitor, and the mouse. I did not insert the Windows 7 recovery disc, but I was under the impression that I didn't need them for what I was doing. Do I just manually shut the computer down? Is there something on the keyboard that should abort the process? My computer is a Gateway and I'm using Windows 7.
I usually restore machine to factory setting once a year, for various reasons. Although I keep system fairly clean, it still gets slow. I hate spending time to install all the programs and OS updates. Since XP days, I used to take snapshots so that instead of restoring to factory setting, I can restore to a setting where all programs are installed. So far NONE of the programs I used worked as I wished, I could always find some leftover folders/files. I don't remember all the programs I used over the period of time.
Now I am on Windows 7 Home edition 64-bit. I have tried its in-built backup but it just did not work. It failed to recognize the back up. I tried system restore point but its rather pathetic, the system restore points just vanish. I think it keeps last 10 or some restore points. I have not tried any other programs on Windows 7 but Macrium Relfect free edition and Paragon backup and recovery 2012, free edition is under consideration to take a system snapshot.
Wanted to know if Windows 7 has the same feature as windows XP in the case described in the following link? Windows XP deletes all system restoration points when disk space is running low. Does windows 7 do the same thing?
[URL]
when delete restoration data and proceed to system boot ,. this message shows on my computer screen, i couldn't press any button from my keyboard..
View 1 Replies View RelatedWhat happened: At the very end of installing RC Windows 7, I got a "failed to upgrade" message, and then it said my system would automatically revert back to Vista, which it did (thankfully).
I have already uninstalled Windows OneCare (virus protection). However, when Windows 7 was installing, my Spyware Doctor opened up and I had to click "yes" on it for the Spyware Doctor box to go away. Do you think that could have caused the upgrade to fail? I had turned off Spyware Doctor, but I'm thinking I should uninstall it before trying Windows 7 again. What do you all think?
Let me start by saying that I'm a neophite when it comes to issuses of anything other than turning the computer on. It appears to me that when a Microsoft update was installed it obviously changed something. I keep getting an error message that reads:[CODE]
View 1 Replies View RelatedI have tried installing Windows 7 in Virtual PC and on my HP 2133 netbook. Both halt when in the copy file stage with this error message:
Windows cannot copy files required for installation. The files may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070241 I have downloaded the iso's again (from the Microsoft partner site) in case there was a corrupt download, but I get the same error.
The VPC image was using the ISO directly, and I copied the files from the iso to a usb drive for the netbook install. Anyone else see this?
I am trying to install printer from network but it gives operation failed with error 0x000003e3.
View 1 Replies View Relatedonly when playing solitare on a new dell laptop, if I let the game sit for a couple min without playing an error pops up saying "failed to create directx" can anyone help me out here?
View 1 Replies View RelatedI have a hp 4 month old laptop. I used it yesterday, turned it off, when I turned it back on 4 hours later, it gave me a message that it needed to do a chkdisk, so it ran that, then started in what looks like safemode. It gave me an error message that says "Windows Socket Initialization Failed". I did a little research and tried to do a system restore, there are no restore points found. It will not connect to the internet, it also give me a message that it cannot connect to the windows service.
View 1 Replies View RelatedTrying to restore Emachine E28 laptop.After last install disk runs I receive the following message:Restore failed. Error code = 045 (WIM ApplyImage cannot apply image. the request could not be performed because of an I/O device error.)Have tried almost everything I can think of but no results.
View 5 Replies View RelatedBelow error has been keep popping in Windows 7 Event Viewer whenever I bootup my system, I had even format my system drive and it still happening.I also have observed that now my PC took a little while more to load.The WinRing0_1_2_0 service failed to start due to the following error:The system cannot find the file specified.Attached is the screenshot of the error.
View 14 Replies View RelatedAfter I downloaded some windows 7 updates I now get this error:[URL]
- When I turn the computer on windows takes a long time to load, about 5 times longer than usual
- My keyboard now does not work (tried others to be sure)
- I have no internet now (this is related to the error, I have read other cases)
The first thing I wanted to try was the winsock reset, but I do not have a keyboard to type with in the command prompt.I have:
OS: Windows 7 home premium 64bit
MOBO: AsRock z77 Pro4-M
(I was going to post this in the software section, but I assumed since it pertains to the network portion of the application and that I can connect through a VPN, that the problem is LAN Network oriented)I recently installed the software Raidcall (RaidCall-100% FREE Group Communication Software- IM, Group Communication and Voice Chat) which is a program designed to be a cross between Skype and Ventrilo. I avidly registered and the process went smoothly. That was all until I came up to login screen where after entering my information, I got the following error: Connection Failed. please try again later (Error code:23). Does this have something to do with Cyclic Redundancy Checking? That's the only information I could come up with. I've done as much research as I can think of, sent them an email with lots of information (no response as to the answer yet), and also asked on their forums but no dice.
Background information (I can provide more if needed)
- On a University Campus ( Technical Information | IT | Indiana Wesleyan University )
-I"m connected directly through to their wall. I"ve also tried swapping out my own cables to no avail.
- Have done an Error Checking Check for both drives (for CYC relation - which I think it may be the culprit (I"m not tech savy though hence my forum post)
- I CAN connect to it through a VPN (Hotshield) - obviously I don't want to have this be my way of connecting through it because I want to use Raidcall while playing (World of Warcraft) and it gives me horrible latency.
- I've called my IT support here at school, and they didn't think it would be something on their end. Although the guy on the other end did not sound intelligible at all.
tracking down and getting rid of things that cause error to appear in event log. one of the few left is the rx filter failed to load issue. seems to be due to roxio program somehow and perhaps related to 32/64 bit issues. suggestions or ignore?
View 1 Replies View RelatedI've tried to install the sp1 update several times now, allways getting the error 800b0100. I read up on the problem in several forums but nothing has worked for me. I ran the System Update Readiness Tool but I still can't install the update.
View 3 Replies View RelatedI received an error message- The module "mswinsck.ocx" was loaded but the call to DllRegisterServer failed with error code 0x8002801c.
View 1 Replies View RelatedI can't launch windows media player with error message DllRegisterServer failed with error code 0x8002801c.
View 1 Replies View RelatedHow can I get into my laptop? I have a Windows failed to start error message. Asking me to inser my windows installation disc which didn't come with laptop
View 2 Replies View RelatedI have this issue dll registerserver failed error code 0x80020009 when I register a dll in win7 64bit.
View 1 Replies View RelatedI get the error:
Platform Error: module fail to initialize
How can I fix this?
(I'm running Windows 7 64 - Bit if that has anything to do with it)
(CSS worked fine n Windows 7 32 bit! )
had some virus problems which i mannaged to fix using Malewarebytes antimaleware.after the removal i tried to install and update a mcafee antivirus. while trying to update it i got an error message, for which the solution was supposed to be runing the following code:Regsvr32.exe %Windir%\System32\Ole32.dll but i got an error message saying something like (it's not in english originally) The module c:\Windows\System32\Ole32.dll was loaded but calling Dll Register Server failed with error code 0x800070005.
View 1 Replies View Related