Joystick Installation Failed In Windows 7
Oct 9, 2012i have only usb joystick for my pc. i dont have any drivers.
View 1 Repliesi have only usb joystick for my pc. i dont have any drivers.
View 1 RepliesWhenever I try to install Windows 7 SP1 it fails. I've searched all over the web to find a fix and nothing has worked. I thought I'd come here since you guys always helped me with other issues.
View 4 Replies View RelatedI was trying to install Widows 7 ultimate (32 bit) on Sony VAIO CS-14G laptop. But the installation was a failure. Error occured during process of expansion of packages during setup. Then i restarted and in the boot menu it was showing windows setup. when i entered, it messeged starting windows (like normally it says during starting of windows 7), and then it showed the messege "Setup cannot be completed" and the system restarted. I have following queries (Note: i was not using the dvd during above installation process and i was doing it from setup files copied on a different partition of hard drive. Now,
1. When I inserted the disc, clicked on Install . I got the following error:When i try to use dvd it gives messege "Load Driver: A required CD/DVD drive device driver is missing....."
2. Setup has created a drive called as X:
How do i remove the windows setup files and also from boot menu.
Windows says device driver installation failed for hp laserjet 1012. This despite printer working correctly. Every time on reboot I get this message. How do I stop windows from trying to install driver for a working device???
View 2 Replies View RelatedThe BIOS is currently set mostly for defaults/auto except for where I needed to specify RAID for the respective SATA ports connected to the two drives I want to stripe and to boot from CD for Windows 7 installation so I adjusted these settings accordingly.The motherboard has an onboard AMD 890FX based RAID controller. I have two 2TB SATA3 drives configured for RAID0 using the onboard RAID controller software. The RAID controller software reports slightly over 4TB as logical drive #1. Everything seems fine at this point.Next step: Boot from the DVD to install Windows 7 Ultra 64. This attempt is a clean install, full (non-upgrade) version, to be installed onto a 4TB RAID0 array using two brand new HDDs.During the installation I supply the device drivers as specified by the mobo's owner's manual. Windows7 installation accepts them no problem. Suddenly, there is a problem... Instead of showing the available drivespace as just under 4TB, after the RAID hardware driver is supplied the list will then show two partitions, one barely over 3TB and another one roughly 1 TB. It does not show one 4TB drive after the driver has been provided from the mobo's driver CD.If I continue to install on the 3+TB drive anyway, the installation routine seems to go through the usual motions... But then comes up with an error... Something about not being able to prepare the drive for booting and to try to re-run the installation program again. It always ends at the same point with the same errror. I will post the exact error message after I give it another try. I should've written it down already, but it's no problem for me to re-create it.So... If someone posts that Windows 7 cannot be installed on a 4TB partition for whatever reason, like it cannot address over 3+TB of drivespace or other reason, then I can just forget about using the two drives in a RAID0 array and use them as 2 single drives.
View 3 Replies View RelatedMy Windows 7 Ultimate upgrade($220) from Windows Vista Ultimate was 3/4 done judging from the progress bar. Received a command prompt stating that the upgrade failed due to corrupt installation files.On reboot I get a disc read error ctrl alt delete.I receive the same error everytime I ctrl alt delete. Is the disc corrupted by the upgrade?
View 4 Replies View RelatedA new hard drive has been installed on my laptop. I tried to install windows 7 and it failed. I am missing the master boot manager. is there free software to fix this problem that I can burn to a dvd or usb flash drive?
View 2 Replies View RelatedI bought my computer from best buy a couple of days ago and I recently got a message saying that my version of windows is not genuine. When I try to run the windows activation update it gives me "Update installation failed. Error information - 0x800B0001" and I still get the message that my windows is not genuine.
View 12 Replies View RelatedI am trying to install DirectX, but it keeps saying installation failed !
View 9 Replies View RelatedI just bought a new Lenovo T430s and a Samsung 840 Pro SSD. Cloned the system by using Norton Ghost (First cloned the hidden disk, then Windows 7 disk) as the manual (Samsung 830 manual) said. Then put the HDD out and put the SSD in. However, the windows failed to bootWindows failed to start. A recent hardware or software change might be the cause. To fix... Status: 0xc000000e Info: The boot selection failed because a required device is inaccessible. I checked the internet and just could understand some basic operations. For example, I entered into bios and saw SATA Controller Mode option [AHCI] Did not find any "Storage config" option... in the main menu. Also, I pressed F12 to the boot menu and selected Samsung 840 Pro but still no work.
View 2 Replies View RelatedI have tried installing Windows 7 in Virtual PC and on my HP 2133 netbook. Both halt when in the copy file stage with this error message:
Windows cannot copy files required for installation. The files may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070241 I have downloaded the iso's again (from the Microsoft partner site) in case there was a corrupt download, but I get the same error.
The VPC image was using the ISO directly, and I copied the files from the iso to a usb drive for the netbook install. Anyone else see this?
Trying to install on an Emachines laptop. I get the following error:
Specs: 1.6ghz AMD Athlon XP-M, 512mb RAM, Integrated Graphics Card.
Also, I know for a FACT that the DVD works and is perfectly fine. I've used it on other machines before.
I'm having trouble installing Silverlight and Office 10 Pro on my computer. I just reinstalled Win 7 on my HD and had trouble with my drivers updating, aka getting BSOD's. When I try to install these two programs, the installation windows say that the programs as failed to install.
View 5 Replies View RelatedMy pc consist of a 200GB drive partition, one side has Win7 x86 and the other Windows Xp, Xp recently failed on me so i had to reinstall it, So i figure I'd installed Win7 X64 Since i use this Partition to run 3D and design Software, figure i could use the memory upgrade. Setup went fine, But now it boots right into win7 x64. Please tell me i can still boot into my other win7 x86 ? I never backed up some stuff on that side.
View 4 Replies View Relatedam failed with installation of visual studio 2008......m using window 7...
View 1 Replies View RelatedI downloaded the VMware software to my C: drive, and when I clicked the file to open it, it opened to about 90% at which point I got the following error: Setup cannot continue. The Microsoft Runtime DLL installer failed to complete installation.I have Windows 7 and plenty of HD space. I've never had this installation problem before. It seems that Windows 7 has been a lot of trouble since I've bought this laptop; I've encountered numerous problems with software using it, though I don't know if this problem is related to it.
View 14 Replies View RelatedOkay, I'm trying to hook this thing up to my new Dell Inspiron 15R. The thing is, when I plug it in, it keeps failing the driver installation. Ok now here is other part. I have used this controller perfectly fine on my previous HP Mini 210. As you know, that's a pretty weak computer compared to the one I just bought.w, after about 2 hours of researching, I've downloaded the current drivers from M$, and that didn't help at all. Next I came across someone who said check the device manager. Okay, so I did a cross examination with both computers and found the netbook had something called "universal serial bus usb controller" drivers with several others branching off while my Dell did not. Also the fact that the Mini uses USB2.0 while the Dell is 3.0.So I've come to the conclusion that my Dell is lacking(and it is) these "Controller" drivers. Now the annoying part is when I use the device manager to search for updates, it says it can't find anything. I've googled around(and used the driver disk that came with my Dell) to no avail.I would greatly appreciate it if anyone could help with my problem. I'm just using the controller for gaming. It works fine in the netbook, so I don't think power to the controller is an issue. My M$ drivers are up to date so I don't think it's those either.
View 1 Replies View RelatedMy former hard drive with my MBR on it failed. This hard drive was/is 750GB and when I purchased my 'main' 2TB hard drive I made another fresh install of Windows. In other words, I had two installations of Windows on two separate hard drives. However, the MBR is located on the now-failed 750GB hard drive, and so my 2TB install of Windows won't work. I have tried (and failed) at repairing or otherwise installing a new MBR on the 2TB hard drive.
View 10 Replies View RelatedI am trying to install Microsoft Network Framework v.4 (x64) and I keep getting error "Final Result: Installation failed with error code: (0x80070643), "Fatal error during installation" (Elapsed time: 0 00:01:01)." The exact log file is attached: Code: OS Version Information:
OS Version = 6.1.7601, Platform 2, Service Pack 1
OS Description = Windows 7 - x64 Ultimate Edition Service Pack 1
OS Version Information
[code].....
I've recently decided to dig out my old Logitech Extreme 3D Pro joystick and put it to good use. However, it seems that Windows 7 either lacks the calibration wizard that Windows XP had or it's just hidden very well. I've google searched "Joystick calibration windows 7" and the like numerous times, all coming up with some tutorial for XP.Anyone could point me in the right direction as to what I should do or where I can go to calibrate this.
View 7 Replies View Relatedjoy stick drivers
View 1 Replies View RelatedJoystick driver for windows 7 32bit?
View 1 Replies View RelatedIn trying to install my Sidewinder Precision 2 joystick in my new Windows 7 computer, I get a message that in order to install it, I need a 64 bit version.Does Microsoft provide upgrades for this?
View 1 Replies View RelatedI really like Win7 the only thing I miss is that you have to have drivers for everything, I really miss my joystick, there's no way to configure it as a generic device.
View 9 Replies View RelatedCan someone please explain why in the year 2009 do we still have to calibrate joystick and control pads (granted it only takes a couple of seconds in the game) just to get things to hold center? I've never understood why a PC has to calibrate it's gaming peripherals whereas consoles you don't.
View 1 Replies View RelatedHow to install an USB game controller in Windows XP Mode under Windows 7 64 Professional ?
View 5 Replies View RelatedInstalled fine lights on but cursor doesnt move or respond in any way am I doing something wrong?
View 3 Replies View Relatedi just got this new controller but i cant seem 2 get it 2 work?
View 9 Replies View RelatedI have an xgr XGM-09V usb gamepad, i has a vibrate funtion but i cant get it to work as i an using the generic drivers that come with windows
View 1 Replies View RelatedTwin usb joystick driver?
View 1 Replies View RelatedIs there a driver for the force feedback 2 joystick that works on windows 7? If not, what is a good controler for Flight Simulator 2000 and the combat flight simulators?
View 1 Replies View Related