Running Fine, Then Restarted, And BSOD On Windows Loading Screen
Apr 19, 2012
Well I will get right to it. Its a desktop I built about 4 mths ago. I was goofing off all day, ran perfect. I got my package from Tiger.com, yay new memory. I also bought a drawing tablet that came w/ photoshop ele 8 and artrage. I promptly shut down my system, installed the new stick of matching memory, Corsair DDR3 4g 1600mhz, in slot two and four, with the old stick. I was only running one stick due to an order error. I reboot. The system recognizes it, runs fine. I install photoshop ele 8 and art rage along with an update to java. So far no problems. I turn the system off to plug in the drawing tablet per the instructions it came with. When it goes to reboot, i get to the windows loading screen, the animation just starts to load when i get a flash BSOD then the moniter shuts off to no signal and the computer just sits there fans and all running. I am using Win 7 home premium 64. I can get into BIOS. I have run the launch repair. I have tried putting the memory back to the previous configuration. I have run the memory diagnostic tool. I have tried system restore but no points to restore. I have tried to repair install with Windows disc, says disc is incompatible with current version, its the same disc i used to install windows the first time. I have tried to reinstall windows twice, still does it. I have attempted to make a repair disc, didnt work. If you can tell me how to get dump files from this state i would be happy to do so. If it helps at all i am using an SSD as my main hard disk, i have a second drive but there is nothing on it atm. I am just at a loss, i know a good bit about computers but not far enough, lol. My desktop is my baby and i really wanna get it up and running again.
View 2 Replies
ADVERTISEMENT
Mar 13, 2011
I'm trying to get windows 7 ultimate on a new WD SATA hard drive. I get through the installation process which recognizes the drive and lets me install on it and seems to fully install. When it automatically restarts and the windows loading screen should appear, the computer just restarts itself and doesn't even let me get to windows.I've tried messing around with some of the BIOS settings, but I'm no expert in that and I seem to be running out of options.I've tried installing the x64 and x82- both give the same problem.One potential thing I'm seeing is that after the initial screen showing my computer specs on start up, I have a RAID screen which AFAIK shouldn't really matter too much since I'm just using one HD, but it does not detect any drives. Going into the RAID setup I can't change anything either because it needs to install something (which I can't - no floppy) or it won't let me for this configuration. My motherboard is a Foxconn 915G7AC/P7AC (unfortunately not the best when it comes to drivers and support stuff, hey - it was cheap and had good reviews when I bought it!)4 Gigs of RAM.My cd/dvd drive is SATA as well, in case that matters (from what I've read searching around other drives being SATA or IDE had some sort of effect)
View 10 Replies
View Related
Dec 30, 2012
Earlier today my dad turned on our computer to a blue screen. It told him to restart the computer if he had never seen it before, and he did. However, we cannot get it to start back up. When we press the power button, the fan runs (harder than usual), but the monitor stays asleep.
View 10 Replies
View Related
Feb 27, 2012
I have a computer which gives me a blue screen when I turn it on. Sometimes this will happen 4 times in a row and others I can't even get the blue screen. I didn't record the error code down but I am trying to replicate the issue and when I get the screen I will update this post.
- x86 (32-bit) or x64 ? x86
- the original installed OS on the system? Windows 7 Enterprise
- an OEM or full retail version? OEM
- What is the age of system (hardware)? 3 years
- What is the age of OS installation (have you re-installed the OS?) 2 months
View 3 Replies
View Related
Jan 27, 2012
I had a virus that would redirect me to advertising, and it wouldn't let me scan for it on any anti virus software. No spyware worked, so I decided to load a new windows 7 on my laptop, fresh start. But as it got to the end of the installation where the menu said completing, it sat like that for 3 hours, so I turned it tooff, and now it keeps loading into the same thing that saids "the computer restarted unexpectedly or encountered an un expected error. Windows installation cannot proceed. To install windows, click ok to restart computer< and then restart installation", I click ok, and it just keeps restarting into the same menu.
View 2 Replies
View Related
Oct 12, 2011
So, upon receiving a new Asus G53SW-XN1 laptop, I promptly put in a smallish SSD to serve as a Windows/common apps drive, moving the HDD to the other hard drive slot.
Fresh install of Windows 7, etc. At the moment, Windows will not boot up - no splash screen, no opportunity for Safe Mode, etc. But Windows is perfectly happy to run - if I boot off a CD, then hit 'Restart', everything starts up fine. The Repair Windows Installation option on the CD sees the Windows installation okay, and when asked to repair says 'no problems are found', and happily reboots. Some sort of MBR/partition issue that the Repair doesn't detect?
View 4 Replies
View Related
Oct 24, 2010
I have just moved house and been given the internet details by the landlord. The provider is Virgin and the landlord asked for my MAC addresses of each device to allow access to the internet and gave me the password. I managed to connect on my iPhone and my housemate who is also running windows 7 off a laptop can also connect. However the network does not even appear in my wireless list. Several other wireless networks in the area are being detected but not the one in the house. I know it's not hidden as I can connect on other devices.
I have tried a manual setup with the network name, encryption etc and tick "allow connection even when network is hidden" but all to no avail. Unfortunately I have no access to the router as the landlord has that next door, however seems strange it would be a router issue if the other devices connect fine. I have been through all the settings with my housemate and ensured we have the same setup and am now thoroughly baffled and annoyed.
View 4 Replies
View Related
Apr 23, 2011
All of a sudden on my Windows 7 ultimate 64bit, my Windows started to run so slow to the point where I can basically not even use it. All the stats show my RAM registering fine(4gb) and I just can't find what the problem will be. In its normal mode, it will take around 20min just to get to the front screen and is super slow when it comes to opening programs as well. It seems to run safe mode fine though, with speeds that I am used to.
View 3 Replies
View Related
Jul 1, 2011
I restarted PC following windows 7 update and shut-down, when the screen came up it was split 3/4's of the way down the screen and now won't go back.
View 1 Replies
View Related
Jul 25, 2011
my pc was running fine. i was playing a game for a few hours. i then left the room for a few mins n when i returned to my pc it had shut down. i tried to turn it bk on and nothin. no fans leds nothing. i unplugged everything for a min then plugged bk in and retried to power up. nothing....so i unplugged everythin again n went to bed. then this morning i plugged everythin bk in hit the power switch n guess wot. it booted up with the usual options after an unexpected shut down. safe mode, safe mode with netwrk n so on.so i booted into safe mode n all was fine.
View 6 Replies
View Related
Dec 29, 2011
I'm very tired of seeing this message booting me to desktop just to ask me if I want to change the color scheme because it perceives my computer is running slow. Load up Batman AC? 10 minutes in focus changes from said full-screen app to this completely unnecessary 'warning'. Battlefield 3? Same thing. Assassin's Creed? Same thing. Skyrim? Same thing.... I don't need Windows to tell me that my resources are being used when I know they are being used. Am I really going to have to go into Properties and Compatibility mode for every game I play? I have clicked that button so many times yet it continues to show! It specifically says "Keep the current color scheme and don't show this message again" Yet even after clicking said button it still shows...
View 1 Replies
View Related
May 20, 2009
so i finally decided to install Windows 7 x86 - everything went well - put all the standard stuff on there etc - i rebooted many times because of installations and updates
on my last reboot it just got stock in the bios screen (verifying dmi pool data..success! etc)
so i rebooted, same thing, took the disc out, same thing - turned off boot devices same thing
tried to use window's useless repair tools (whatever happened to repair install?) which didn't help - so i decided to format and reinstall - then it says it was unable to do that (partition error or something)
the annoying this is...is that this EXACT..i mean EXACT same thing happened when i installed vista sp1 from scratch - this happened - and to fix it i had to leave my pc open overnight with the hard drive cables all unplugged..in the morning with my fingers crossed i tried the installation again - and it worked.
my d: always disappears (single hard disk sata 233gig (250)) - sometimes it'll vanish from my computer and stuff - but this can't be the problem because the d: is a single drive on its own - my c: is a25gig partition from my e: - so it's completely unrelated.
does it matter how i replug the sata cables (2 of them) into the mother board? - they're both being recognised anyway
this is really annoying though - mostly because there isn't really an explanation - and because this random stuff always happens to my pc! - is it my hard drive because that's the only thing that would half- make sense
View 5 Replies
View Related
Mar 26, 2011
Fujitsu Siemens laptop, Intel dual core, 1.75g ram. When I restart it, fails to load and doesn't even show to startup screen, nothing, just a black screen. so, I must shut it down from the power button. And if I start it rapidly, it's possible to not start from the first try. I made a fresh install of the OS, nothing. Can this be a hardware problem?
View 4 Replies
View Related
Sep 2, 2012
I have a strange issue with my PC, I keep getting BSOD whenever I power my PC on. It BSOD's a few minutes after booting Windows or sometimes half way through loading with different error messages and usually repeats the same process about 3 times, after that all is fine. The PC will not crash at all, and would be on for hours on end, either idling, playing media/gaming/browsing etc. BSOD Error messages are often; driver not equal or less etc, USB Bug code, non page area etc.I have attached a few days worth of Minidumps that have been created (most recent).Please note, iv'e tested my memory (which most always suggest) and Memtest found no faults on a full test. And I know for sure it cannot be that otherwise it would crash whilst doing something that requires much more memory use.Iv'e took every USB's out of the ports and the problem is still there.It must be a corrupt driver of some kind or a problem with bootup/system files?
Specs:
Processor: Intel Core 2 Quad Q6700 @ 2.66GHz
Memory: 2x2GB DDR2 Samsung 800Mhz Dual Channel Ram
Hard Drive: 640GB + 500GB + 300GB Sata II & 300GB IDE
Video Card:XFX ATI Radeon HD5770 1GB GDDR5 DX11 Single Slot
Monitor: BenQ G2220HDA 1080p 1920x1080 (16:9)
Sound Card: TerraTec Aureon 5.1 Fun Card (2.1 PC + 5.1 Optical out)
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) SP1
Motherboard: Acer MCP73PV MicroATX Motherboard
PSU: OCZ 600W MODXSTREAM PRO PSU
View 2 Replies
View Related
Sep 2, 2012
I keep getting BSOD whenever I power my PC on. It BSOD's a few minutes after booting Windows or sometimes half way through loading with different error messages and usually repeats the same process about 3 times, after that all is fine. The PC will not crash at all, and would be on for hours on end, either idling, playing media/gaming/browsing etc. BSOD Error messages are often; driver not equal or less etc, USB Bug code, non page area etc.I have attached a few days worth of Minidumps that have been created (most recent). [URL] iv'e tested my memory (which most always suggest) and Memtest found no faults on a full test. And I know for sure it cannot be that otherwise it would crash whilst doing something that requires much more memory use.
Specs:
Quote :Processor: Intel Core 2 Quad Q6700 @ 2.66GHz
Memory: 2x2GB DDR2 Samsung 800Mhz Dual Channel Ram
Hard Drive: 640GB + 500GB + 300GB Sata II & 300GB IDE
Video Card:XFX ATI Radeon HD5770 1GB GDDR5 DX11 Single Slot
Monitor: BenQ G2220HDA 1080p 1920x1080 (16:9)
Sound Card: TerraTec Aureon 5.1 Fun Card (2.1 PC + 5.1 Optical out)
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) SP1
Motherboard: Acer MCP73PV MicroATX Motherboard
PSU: OCZ 600W MODXSTREAM PRO PSU
View 1 Replies
View Related
Oct 12, 2012
It started out of nowhere last week - computer restarted itself twice, then BSOD. When starting Windows normally, it would appear as soon as I logged in. However, computer ran fine in Safe Mode and also ran fine under normal conditions if the internet was unplugged. I eventually diagnosed that the issue was caused by an AVG module when it connected to the internet. So, I uninstalled AVG and verified that the computer ran fine while connected to the internet. I then reinstalled AVG, thinking I had solved the problem.
Now the BSOD appears as soon as I log into Windows (same as last time). Except this time, it appears even though I have again uninstalled AVG and disconnected the computer from the internet. It works fine in Safe Mode.
View 4 Replies
View Related
Aug 12, 2012
ive been getting BSODs and finally figured out how to debug it with WinDbg (x86) and set the symbols for windows but i cant read the text. ive tried reinstalling my GPU and Java but no luck. when i try to run intel driver update utility as soon as i run it i get a BSOD ive got the minidump here if anyone knows how to read it, so here you go.
Microsoft (R) Windows Debugger Version 6.2.8400.0 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:UserskalyeDesktop�81212-36504-01.dmp]
[Code].....
View 9 Replies
View Related
Mar 29, 2012
We have 20 pcs that are all identicle
Asus P8z68 v Gen3 mboard
i7 2700k 3.4 proc
win 7 64 Ent
2 x 1tb hdd raid 0
1 x OCZ Vertex 3 SSD for caching
4 x 4gb corsair vengance ddr3 ram
Geforce 560ti phantom GFx card
Corsaid 850 psu
We have created a network image using Acronis which has so far been successfully installed on 4 of these machines. However, we have come to the 5th machine and as of last night it refused to power on. Then after 10-15 mins it came up and started to load windows but gave us a BSOD and everytime it restarted itself it would give us a different message. I have attached the logs for someone to look at to see if this is possibly a PSU issue or something else.
The machines have:
Windows 7 enterprise
office 2010
adobe reader x
silverlight
IE 9
Firefox
McAfee
Visio Viewer
View 1 Replies
View Related
Mar 24, 2012
Recently, my computer starts up windows and after the loading screen it just sits at a black screen forever with a cursor and it doesn't even make it to the log in screen. I have tried safe mode with the same results. What I've Done So FarTried to Repair Startup with Windows DVD Tried to use sfc /scannow at boot (Says pending changes and needs to restart) Tried logging into my Ubuntu partition and virus scanning (None found) Tried copying Reg Files from Regback into config while I was in Linux Tried to Repair Install (But I can't log into Windows ) Tried to bootrec /fixmbr /fixbot /RebuildBcd (Which destroyed my dual boot linux grub, but I was desperate. And still nothing) Interestingly though, after I do /RebuildBcd command it says something like "Found Windows Installations: 0" Tried to System Restore (Gave me an Error, wouldn't you know) At this point I'm not to confident that this can be fixed. If anyone has any ideas I'm willing to try. Or if you have any snazzy suggestions on how I could fix it using another computer, I have a different Windows Pro x64 computer that I can put the HD in if there's someway I can save my data/fix it/repair install from there. I just don't know how.
Edit: I finished the chkdsk and there were no bad sectors, though it did give me a message "Failed to transfer logged messages to the event log with status 50."I did a Windows Defender Offline scan with no viruses and I'm currently scanning with Kaspersky Rescue disk. I don't believe it is a virus, I think it's a corruptregistry at this point. I had just cleaned my registry with CCleaner before the shutdown that led to this >.<
View 9 Replies
View Related
Nov 26, 2009
This is a strange one and i'm hoping someone can help me solve this!
I have a work PC with XP on with 2 x Nvidia 7300 GS graphics cards in. The system doesn't have an onboard graphics card and i've only got 2 so i can have dual monitors.
I tried to install Windows 7 Pro (32) on a seperate partition and it kept BSOD (hardware error 000124) on the 2nd reboot before finialising installation. The only way i've found of not making it BSOD (or just go to a black screen then restart) is to pull out one of the graphics cards and run it solo. With this done everything seems to work.
It will also happily boot into Safe Mode with both. I've got the latest NVidia driver from the site and it's been installed but that makes no difference to the issue.
Any ideas or should i just get 2 new gfx cards?
View 4 Replies
View Related
Nov 2, 2012
My Laptop loads fine when started but as soon as I get the windows 4 Dots turning it is a Blank Screen.
View 1 Replies
View Related
Jul 18, 2012
My computer has been going through this phase upon restart where it will BSOD around every 30 min for a couple days, then all of a sudden will be fine untill the next restart. I am running a ASUS laptop with Windows 7 Home Premium that I have had for about 2 years. I uploaded the latest .dmp file, I can upload more if necessary.
View 3 Replies
View Related
Apr 15, 2012
i followed the same issues and solution shown here:[URL]..but the problem is, when i go to that folder using command prompt, i dont see any cachecat.cache file, only driver.rtl in codeintegrity.
View 1 Replies
View Related
Nov 27, 2011
Battlefield 3 crashes regulary with BSOD after playing for a while.Checked CPU Temps with CoreTemp - around 38C?Checked GPU with MSI Afterburner - around 60C.Windows 7 Home 64-bit / Asus P5QLD Pro / 4GB RAM / Gefore 560 Ti / SB 5.1 VX.
View 1 Replies
View Related
May 9, 2011
While loading windows 7 64 bits ultimate i have several, if not many, crashes. Although loading my other system (XP SP3 32bit) don't have any crash by loading it (sometimes).i'm kinda tired of this problem, it annoys me and keeps me wasting time
View 9 Replies
View Related
Nov 19, 2011
When I get the login screen, I just see the buffer LED glowing for 1 minute. Then it calms down. Then after logging in, the buffer LED keeps glowing for 5 minutes and my computer is terribly slow. If I do nothing through all this operation and just wait, all will be okay. So usually I can use my laptop after 8 minutes from turning it on.On the other hand, if i directly start opening applications before the buffer LED turns off (sometime only firefox), I directly get the bsod. Each time I get a different code for it. Why is this happening? Please find below the laptop specs and things that I have tried. [code]
View 1 Replies
View Related
Dec 18, 2011
My windows 7 professional 32bit on my laptop has a problem. Everytime I turn it on, my laptop screen is white (and fades in some hints of black) and nothing shows up. However, sometimes I am able to get a display on an external monitor.
Before my computer loads my desktop it does a startup repair. What ends up happening is that it does a system restore and my computer is able to boot up normally on my external monitor (laptop screen still white). Once everything loads, my computer automatically looks for and installs a VGA controller driver (at this point I am suspecting something may be wrong with my graphics card because I no longer have the windows aero theme).
Once the VGA drivers are installed, my computer says it has to restart so that changes can be made. After the restart, everything is back to normal with my laptop screen working again and now I have the aero theme again. What is the problem? I've been trying to fix this for weeks. It should be noted that I can't always get the display onto my external so I have to keep on force restarting (holding onto the power button) until I can get it on the external.
I installed a new driver for my graphics card and it hasn't fixed the problem. I know there is a virus on my computer (file is tdx.sys). I am going to replace that file with a new one following some instructions from another forum but I don't want to do that yet because I am currently writing exams and not much of a tech savvy person. I don't want to mess around with system files until at least after my exams so I can back up everything.
View 9 Replies
View Related
Nov 2, 2012
After about 2-3 hours I had everything installed, powered up just fine, popped in the windows 7 disc and started installation. Everything ran smoothly until first restart. It went to the screen where the colors fly in to form the Windows logo and says starting windows and then just sits at that screen indefinately. I've searched numerous forums trying to find an answer but I haven't found any with the exact problem i'm having.
View 4 Replies
View Related
May 4, 2012
My computer boots up fine. All programs work fine. While I'm not using it (at least it hasn't happened while I'm using it) I hear it beep once and when I go to check the computer the screen wont show any picture, it's like the monitor is on but the PC is off.PC light is still on, hard drive still spinning and the fans are still on.I have to reset the PC and I get the "Windows was not properly shut down" message upon reboot.
View 5 Replies
View Related
Nov 18, 2012
I did a clean windows 7 installation after formatting my Hard drive the installation went clean i noticed that after switching my computer it takes me directly to " starting windows " and then to " Login screen " but in my previous installation i use to get,As shown in the picture, the black screen showing microsoft corporation logo with green bar and i am not getting the same in my new installation what went wrong.
View 8 Replies
View Related
Jun 25, 2012
I have had an issue the past week with my computer both loading and shutting down and I also have an issue with hiccups during gaming...
I have downloaded Malwarebytes and Superantispyware to see if I have also attempted to update all my drivers via windows 7 option
computer specs:
Intel Core 2 Quad Q6600 not overclocked
2x 2GB Mushkin Enhanced Redline DDR2 Ram
2x 2GB corsair DDR2 Ram
EVGA Superclocked GeForece GTX 560 Ti
EVGA Nvidia nForce 750i SLI
Antec High Current Gamer 900w PSU
Western Digital Raptor 160GB 10000RPM (Dont remember exact one)
Windows 7 64-bit Home Premium
View 1 Replies
View Related