BSOD When Windows Boots Up - Computer Fine In Safe Mode
Oct 12, 2012
It started out of nowhere last week - computer restarted itself twice, then BSOD. When starting Windows normally, it would appear as soon as I logged in. However, computer ran fine in Safe Mode and also ran fine under normal conditions if the internet was unplugged. I eventually diagnosed that the issue was caused by an AVG module when it connected to the internet. So, I uninstalled AVG and verified that the computer ran fine while connected to the internet. I then reinstalled AVG, thinking I had solved the problem.
Now the BSOD appears as soon as I log into Windows (same as last time). Except this time, it appears even though I have again uninstalled AVG and disconnected the computer from the internet. It works fine in Safe Mode.
View 4 Replies
ADVERTISEMENT
Aug 13, 2012
Windows 7 x64 does not boot into Safe Mode or Safe Mode with command prompt. Normal mode boots perfectly. Are there any suggestions on how to resolve this? I've tried startup repair and attempted fix boot, etc. No affect. The unit is free of infection. I also tried using SFC, but it said everything was fine.
View 6 Replies
View Related
Oct 18, 2011
Windows 7 will not boot into NORMAL mode. It will only boot into SAFE mode.This Windows does not provide the option: Boot into last good configuration....It only offers: SAFE SAFE with Networking normal In Safe Mode, I can not get Windows to react to a hard network connection.I don't know how to get out of the SAFE mode loop and force Windows back into NORMAL mode.
View 3 Replies
View Related
Jun 18, 2012
My PC only boots in safe mode. It works fine in safe mode. Otherwise , it stops at starting windows and does nothing else. I've backed up all data in safe mode. Now I want to delete everything and install a new version of windows 7. But when I try to install it (from usb) it freezes at starting windows also (it loads from usb). How can I delete my hard drive? (I don't have the thing to connect it to another computer)
View 2 Replies
View Related
Jan 15, 2013
Windows 7-32 only boots up to safe mode after installing Avast software? Tech support for Avast wanted $100.00 to fix and I only paid $20 for the Software?
View 4 Replies
View Related
Jun 12, 2010
I tried to install with my graphics card ATI ASUS EAH4350, but I couldn't install win 7. It stopped when "starting for first use" message. But I found solution to install Windows 7 in vga mode and it worked. Then again I put my graphics card and started win 7. It automatically installed vga driver and asked me to restart before I install ati catalyst driver from cd. After restarting when black screen comes before "win 7 welcome screen" it freezes with mouse pointer. It only starts in vga mode or safe mode. By the way I have win xp as well in c drive nad installed win 7 in h drive.
View 3 Replies
View Related
Jun 12, 2010
first i tried to install with my graphics card ATI ASUS EAH4350,but i couldnt install win 7. it stopped when "starting for first use" message. but i found solution to install Windows 7 in vga mode and it worked.
then again i put my graphics card and started win 7. it automatically installed vga driver and asked me to restart before i install ati catalyst driver from cd.after restarting when black screen comes before "win 7 welcome screen" it freezes with mouse pointer.
i have been searching many forums,but found no solution. it only starts in vga mode or safe mode. by the way i have win xp as well in c drive nad installed win 7 in h drive.
View 7 Replies
View Related
Dec 18, 2011
I am working with an emachine with windows 7 home premium installed. Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Home Premium, 64 bit Processor: AMD Athlon(tm) II X2 250u Processor, AMD64 Family 16 Model 6 Stepping 2 Processor Count: 2 RAM: 3839 Mb Graphics Card: NVIDIA GeForce 6150SE nForce 430, 256 Mb Hard Drives: C: Total - 703013 MB, Free - 637698 MB; Motherboard: eMachines, MCP61PM-GM Antivirus: None Was given machine with infections, tried to fix viruses with HDD installed but could not boot normal, only safe mode.Removed HDD and slaved to working system and ran virus scan. cleared 18 viruses, ran a second scan on drive and it came back clean (used norton antivirus)Loaded the HDD back into the machine and still can only boot into safe mode. Searched forums and saw similar issue and followed instructions listed below:Open Regedit.exe Navigate to HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSafeBoot Delete the subkey folder called OPTION Navigate to HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSession ManagerEnvironment Delete the value called SAFEBOOT_OPTION Reboot and done The problem is, there is no option subkey under HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSafeBoot I did delete the SAFEBOOT_OPTION under HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSession ManagerEnvironment and restarted. It booted in safemode and when I checked regedit again. the SAFEBOOT_OPTION under HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSession ManagerEnvironment was back and shows Minimal under it. I changed it to normal and restarted and it changes back to minimal after booting to safemode again.
View 2 Replies
View Related
Oct 15, 2012
i was using my HP 2711x last night and it was working wonderfully, and today i turn it on to do some homework and it doesn't show me the login screen, it's just black. and then i try it in safe mode and it works, what could be the problem? and can you explain step by step so i don't miss anything
View 3 Replies
View Related
Jul 31, 2012
After trying to scan my computer with tdskiller (I believe its called) to remove some viruses, I was asked to reboot. When I did, my backround desktop picture turned black, files seemed to be missing from my desktop and a window poped up scanning and telling me how many errors I had. Shortly after I got about 20 error pop up messages. I rebooted my computer and more files were missing to the point all I had was recycle bin, and two other programs.
Now the computer runs only in safe mode, No matter what I do (pressing f8 - start in normal mode) nothing works. I cant get internet access, and worst of all, I cant even system restore or even recover it back to to the malfunctioners option due to errors. I am stuck and do not know what else to try.
Ive tried the repair option in dos aswell and it just keeps me in the "Loading window files" screen, as I left it there for nearly four hours im guessing that was not going to work.
View 7 Replies
View Related
Sep 27, 2009
Everything was working however now I can only boot into safe mode regular or networking. When I try to boot normal either it reboots or goes into recovery mode.
Suggestions!?
View 2 Replies
View Related
Jun 5, 2012
My computer runs like grease lightning in safe mode, and my internet speeds are marvellous also, but alas when not in safe mode I have on quite a few occasions lately had my Windows freeze, my Windows Live Mail also freeze. I will define freeze, everything just does not work, my browser Firefox/Google, none of my loaded programs.
I have to leave the computer for about 10 minutes, and then it is perfect all day!, so I am guessing a program is causing the dilemma, but which one? I have about 60 applications running and I haven't loaded a new one in about 6 months. Is there a program I can purchase/download that would seek out the rogue program if indeed it is a rogue program.
View 9 Replies
View Related
May 4, 2012
My computer boots up fine. All programs work fine. While I'm not using it (at least it hasn't happened while I'm using it) I hear it beep once and when I go to check the computer the screen wont show any picture, it's like the monitor is on but the PC is off.PC light is still on, hard drive still spinning and the fans are still on.I have to reset the PC and I get the "Windows was not properly shut down" message upon reboot.
View 5 Replies
View Related
Jun 17, 2012
My friends PC restarts automatically no BOD or any error message that usually comes after the restarts.
Motherboard: Gigabyte 945 GCMX S2 on Windows 7
I check to replace RAM but same thing. One more interesting thing is that it works fine in Safe mode. restarts time is random.
View 6 Replies
View Related
Nov 10, 2012
Well, my pc is my best friend, its doing its job correctly, until now. i was playing some games, then suddenly the computer just freeze, so i restarted it.
and then the Windows boot normally, but after boot(before the Welcome screen), the computer freezed, and sometimes BSoD appear, and i just keep restarting and its the same... tried System Restore and System Repair.
View 2 Replies
View Related
Jan 5, 2013
A few of my programs are unable to communicate with their servers now and I can't figure out why as they were find two weeks ago and I haven't made any changes since then. The issue lies with a service/program within Windows as all the programs communicate fine in Safe Mode. Windows Firewall and ICS are both disabled within Services. Malwarebytes (my only AV right now) is disabled also.I know this is an ongoing and repetitive subject but the numerous searches are all resulting in pointing fingers at an AV program, which I am sure is completely disabled.
View 5 Replies
View Related
Jan 6, 2013
A few of my programs are unable to communicate with their servers now and I can't figure out why as they were find two weeks ago and I haven't made any changes since then. The issue lies with a service/program within Windows as all the programs communicate fine in Safe Mode. Windows Firewall and ICS are both disabled within Services. Malwarebytes (my only AV right now) is disabled also. I know this is an ongoing and repetitive subject but the numerous searches are all resulting in pointing fingers at an AV program, which I am sure is completely disabled.
View 4 Replies
View Related
Jan 5, 2013
A few of my programs are unable to communicate with their servers now and I can't figure out why as they were find two weeks ago and I haven't made any changes since then. The issue lies with a service/program within Windows as all the programs communicate fine in Safe Mode. Windows Firewall and ICS are both disabled within Services. Malwarebytes (my only AV right now) is disabled also.
I know this is an ongoing and repetitive subject but the numerous searches are all resulting in pointing fingers at an AV program, which I am sure is completely disabled.
View 2 Replies
View Related
Mar 29, 2012
My A200 has been upgraded to 4GB RAM, and Win7, worked fine for a while, then started randomly freezing with weird screen stuff (video not displaying properly). Power off only worked. Much frustration and removal of progs later, tried on safe mode - works fine. Safe mode with networking - works fine. Can plug it in (surefire way to get it to fault normally) and in safe mode it works fine, in normal mode, immediate fault.
Thought perhaps a horrible malware, did clean install from disc of win7, no change (except now, coz I deleted all the Toshiba drivers, the dvd drive is noisly lol). Can't load progs to run the damned thing properly because it won't run in normal mode, only safe mode. Tried formatting the hdd, but it won't let me (partitions) which I thought were reformatted during a clean install anyway?
Haven't tried changing the charger yet, because it works fine in safe mode, so I thought probably a software issue? Have tried minimal or "clean" normal boots, freezes immediately.
View 3 Replies
View Related
Jun 18, 2012
My computer has been stable for years, however recently I have been getting BSOD when doing any task. Windows will sometimes load to the desktop and I am able to watch video, run windows score, check email, etc before it will BSOD. Other times, it will BSOD before getting to the windows login screen.When I use safe mode, it logs in and stays there - no BSOD.I have tried removing all extra hardware in the machine, however this has had no affect. I have also tried one stick of RAM, then another, both BSOD.
View 3 Replies
View Related
Feb 8, 2012
I have been getting BSOD errors whenever booting into regular mode. Safe mode is fine (I have tweaked the registry so I have sound in safe mode) My system specs are in my profile, but used Winaudit for full specs. The winaudit report in formatted text is too big for an attachment. I have 2 attachments to this post, including zipped up minidumps. Could my registry tweak for sound have something to do with this? Perfmon /report was run, but it says:
An error occured while attempting to generate the report. The system cannot find the path specified.
View 6 Replies
View Related
Sep 17, 2012
So I am having trouble with my computer since last night it started to give me the blue screen of death every 10-15 minutes with all kinds of different reasons. I cleaned my pc, searched for viruses as much as I could, and I have restored to a different point in time twice. I have tried the windows memory diagnostic twice. No issues. I have tried the files check before start up, no issues were detected.Pfn_list_curruptan attempt was made to write read only memorysomething on the lines of service_system_exeption? Not sure about the last word to be honest I caught it while my computer restarted on its own. Memory_ managment Bad_pool_errorI am not sure what to do I have done all I can by myself. I will be doing a complete restore to manufacture settings after I get something to back up my files. In the meantime maybe I can figure out if it is a hardware issue or if there is something else currupt.
View 2 Replies
View Related
Sep 18, 2012
I can only run Windows 7 Home Premium (different computer than the one I'm posting from) in safe mode. When I try to use the Diagnostic Tool, it says that it is saving the files but then it doesn't finish up with giving me the folder on my desktop. How I can get the files to show so that I can attach them to this thread?
View 3 Replies
View Related
Sep 27, 2012
I had a BSOD problem launching Borderlands 2, and some other games too. My Video Card drivers are up to date and i still have BSOD. I got blue screen once more, and my pc restarted. Now I can't even start my windows, I get some black screen before windows 7 logo appears and I can't even start my windows in safe mode nor can I boot from a CD/DVD.
My system specs:
Processor: AMD FX-8120
Graphics Card: AMD Radeon HD 6850
RAM: 8GB 1866mhz
HDD: 500GB
View 8 Replies
View Related
Oct 5, 2012
I can't boot my computer in normal mode or safe mode. When I try to do so, after the "starting windows" page the only things that come up are my mouse, a black screen/background, and a "logonui.exe-bad image- Authui.dll isn't designed to run on windows" error/message (not the exact message). I can't use a system restore (it can't find a restore point), the image recovery tool finds no image to restore from, system repair either doesn't find a problem or can't fix the problem, and basically nothing else works (none of the advanced boot options or other various buttons and tools do anything noticeable). I've even tried to use sfc in command prompt, but whenever I do any sfc things at all (/scannow, verifyonly, verifyfile, etc.) it says there is a system repair pending that requires a reboot. I've restarted 7-8 times and the exact same message keeps coming up. I'm looking for any general help I can get right now, [I can post my computer specifics in an hour when I have time](posted a few). I have an HP pavilion dv6-6135dx wiht Windows 7 x64.Processor: AMD a8-3500m APU, raedon graphics bios vender/version: insyde, f. 20.I'm having trouble getting more info because my computer is still crashing occasionally and I don't really know what else is relevant; if you need more, I might need directions on how to get it. Especially if it involves command prompt.I should also add that it has been crashing more often than I think is normal ever since I got it, but recently it BSODed 3-4 times a day. I have antivirus and also ran a full malwarebytes scan yesterday, and it only found one little issue which was resolved.
View 7 Replies
View Related
May 24, 2012
I seem to be having quite the problem on a computer of mine. After recently installing the directx sdk I am unable to logon through normal or safe mode. When I try to boot up normally, I log in but then the monitors go black but everything else seems to run. Pressing ctrl alt delete works and brings up the screen again but if I try to select task manager for example the screen goes black again. When I boot up through safe mode the computer restarts seconds after loading the windows logon screen.
View 2 Replies
View Related
May 26, 2012
I have ran the BSOD Dump & System File Collection app with the results attached. I attempted to run PERFMON report but was unsuccessful (Error: cannot find specified path).
I am running Windows 7 Home Premium (64 bit) and this is the original OS that was preinstalled with my laptop (ASUS G60VX). The system is approximately 2.5 years old and I have never re-installed the OS.
I continuously run system mechanic to monitor and clean out the drive and also use Norton 360 to supplement system mechanic. The system was gradually slowing down and occassionally freezing up. I upgraded the CPU with a T9600 chip and the system seemed to run fine but the temps definitely increased (fan constantly running but rpms varying with temps); I use SpeedFan to monitor temps. The lagging once again started so I had a deep scan and repair of the hard drive performed; took all night to run. This was done approximately one week ago. The system afterward now continually shuts down (BSODs) with no rhyme or reason. I do not know if it is hardware (GPU or hard drive) or software. I have re-installed the original CPU to see if this was the problem but the BSODs continue.
I am capable of operating in Windows Safe Mode with Networking.
View 2 Replies
View Related
May 11, 2012
Earlier today I wanted to get into Safe Mode in order to cleanup up leftover files from an uninstall of Catalyst.I have a hard time getting into safe mode via my BIOS so I generally use msconfig. I always set it to run straight into Safe Mode (which is what I did today). When I restarted I got the 01E BSOD. I'm assuming it is another driver or that my system files are corrupted.I checked my hardware and individually ruled that out.Now I am in a situation where I cannot boot into the regular OS to try and figure out what is really going on (gather the dump files etc..). I have been trying to access msconfig via the command line from my DVD but can't figure out how to get the right permissions and actually run it to turn off the safe mode boot option. I use a RAID 0 startup so I have to load the RAID drivers when I pop in the DVD. Then I have to switch drives from the command prompt from "X" to whatever the RAID drive shows up as.
View 4 Replies
View Related
Nov 25, 2012
I have tried to start my laptop normally and in safe mode and it send me to start upi repair, this runs for two days and then I get an error message about no communications code 0xc00000e9
View 2 Replies
View Related
Jul 16, 2012
my computer was running fine then yesterday i suddenly got shut down and anytime i turned it back on i would get a BSOD after a few seconds unless i went to safe mode its a page_fault_in_nonpaged_area 0x00000050.the only thing different is i downloaded borderlands from steam, played for about 8 hours, then got the packs running, then 10 mins later it shut itself down on its own currently system restore only had 2 options for 8am when i downloaded borderlands, 1 said critical system update adn the other was direct x 9 im not good with computer hardware so if u need any more info tell me, but heres some system stuff System Info Processor: Intel(R) Core(TM) i7 CPU 960 @ 3.20GHz
[code]...
View 9 Replies
View Related
Aug 10, 2012
getting BSOD after boot and desktop comes up. i can get in safe mode without BSOD coming up. Attached SF Diagnost. from my Dell Laptop.
View 3 Replies
View Related
