Blocked Connections When Booting Normal But Fine In Safe Mode
Jan 6, 2013
A few of my programs are unable to communicate with their servers now and I can't figure out why as they were find two weeks ago and I haven't made any changes since then. The issue lies with a service/program within Windows as all the programs communicate fine in Safe Mode. Windows Firewall and ICS are both disabled within Services. Malwarebytes (my only AV right now) is disabled also. I know this is an ongoing and repetitive subject but the numerous searches are all resulting in pointing fingers at an AV program, which I am sure is completely disabled.
A few of my programs are unable to communicate with their servers now and I can't figure out why as they were find two weeks ago and I haven't made any changes since then. The issue lies with a service/program within Windows as all the programs communicate fine in Safe Mode. Windows Firewall and ICS are both disabled within Services. Malwarebytes (my only AV right now) is disabled also.I know this is an ongoing and repetitive subject but the numerous searches are all resulting in pointing fingers at an AV program, which I am sure is completely disabled.
A few of my programs are unable to communicate with their servers now and I can't figure out why as they were find two weeks ago and I haven't made any changes since then. The issue lies with a service/program within Windows as all the programs communicate fine in Safe Mode. Windows Firewall and ICS are both disabled within Services. Malwarebytes (my only AV right now) is disabled also.
I know this is an ongoing and repetitive subject but the numerous searches are all resulting in pointing fingers at an AV program, which I am sure is completely disabled.
Well, my pc is my best friend, its doing its job correctly, until now. i was playing some games, then suddenly the computer just freeze, so i restarted it.
and then the Windows boot normally, but after boot(before the Welcome screen), the computer freezed, and sometimes BSoD appear, and i just keep restarting and its the same... tried System Restore and System Repair.
I have a HP Probook 4430s and under device configurations in the F12 options, what does "Numblock on at boot" mean and what does it do. I'm still having troubles booting up.I can start up in safe mode and w/networking and have been trying to figure out how why it dosn't want to work right. When I'm in safe mode everything works fine but when i shut down and try to power back up i can only do it in one of the safe modes, also it takes a really long time to even do that.So I was just wondering what Numblock on at boot ment and what it does.
the computer I am concerned with is running Windows 7 with IE8, Microsoft Security Essentials and Malwarebytes Anti-Malware. I am currently in Safe Mode with Networking without issue.The owner of the computer says that something happened earlier today while he was online that sounds like some false antivirus popup, but he's unsure. Here are the symptoms in normal mode. Every application, from moving through them to opening and closing them, runs exceptionally slow - one to three minutes to open, at least a minute to open internet pages. I noticed that, when in IE, as the pages are loading the IE page disappears and reappears. I am not very familiar with Windows 7 so I don't know if it is related. The computer seems to be getting slower as the day goes on. CPU usage is very high.So far, I have disabled many startup items that were unnecessary. I ran CCleaner and cleaned up. MBAM was run in both normal and safe mode, full scans, and found nothing. This is also posted in Viruses and Malware, but I'm unsure where it should live.
window 7 working on safe mode and unable to choose the another restoration point and it is not loading in normal mode -after installed third party software worked on that for few hours, then after switched off and later it switched on then after this problem started, automatic repair done, nothing is notified
I am using acer laptop,intel Pentium processor,windows7 professional os,my problem is windows is not starting normally and is running safe-mode.when entering normal mode it is displaying "welcome" after entering password "Please wait",it takes a long time to starting window and i'm waiting more than 24 hours but its not starting window normally...but it starting safe mode.
My laptop hangs up/ freeze in normal mode. Now I can only open it on safe mode. I was only copy pasting some files couple days ago when it happened. I have to hold the power button to turn it off. I already tried system restore and reformatted it twice. I'm using HP Pavilion dm4-1160us, windows 7 64-bit.
I can't boot my computer in normal mode or safe mode. When I try to do so, after the "starting windows" page the only things that come up are my mouse, a black screen/background, and a "logonui.exe-bad image- Authui.dll isn't designed to run on windows" error/message (not the exact message). I can't use a system restore (it can't find a restore point), the image recovery tool finds no image to restore from, system repair either doesn't find a problem or can't fix the problem, and basically nothing else works (none of the advanced boot options or other various buttons and tools do anything noticeable). I've even tried to use sfc in command prompt, but whenever I do any sfc things at all (/scannow, verifyonly, verifyfile, etc.) it says there is a system repair pending that requires a reboot. I've restarted 7-8 times and the exact same message keeps coming up. I'm looking for any general help I can get right now, [I can post my computer specifics in an hour when I have time](posted a few). I have an HP pavilion dv6-6135dx wiht Windows 7 x64.Processor: AMD a8-3500m APU, raedon graphics bios vender/version: insyde, f. 20.I'm having trouble getting more info because my computer is still crashing occasionally and I don't really know what else is relevant; if you need more, I might need directions on how to get it. Especially if it involves command prompt.I should also add that it has been crashing more often than I think is normal ever since I got it, but recently it BSODed 3-4 times a day. I have antivirus and also ran a full malwarebytes scan yesterday, and it only found one little issue which was resolved.
Windows 7 x64 does not boot into Safe Mode or Safe Mode with command prompt. Normal mode boots perfectly. Are there any suggestions on how to resolve this? I've tried startup repair and attempted fix boot, etc. No affect. The unit is free of infection. I also tried using SFC, but it said everything was fine.
I seem to be having quite the problem on a computer of mine. After recently installing the directx sdk I am unable to logon through normal or safe mode. When I try to boot up normally, I log in but then the monitors go black but everything else seems to run. Pressing ctrl alt delete works and brings up the screen again but if I try to select task manager for example the screen goes black again. When I boot up through safe mode the computer restarts seconds after loading the windows logon screen.
I have a Laptop HP pavilion Dv4 my graphics card is AMD M880G with ATI Mobility Radeon HD 4200, my processor is AMD Turion(tm) II dual core mobile M500. The thing is i was playing Tropico 4 and i paused it then it began to mix pixels i couldn't see nothing, then i restarted and this is what happens:I cant see nothing, all is mixed up. on safe mode runs well.I played driver san francisco, fallout new vegas before and any of this happened.
I have Windows 7 on Laptop. My mouse stopped responding in the Windows normal mode but functions fine in the Safe mode. I restarted the laptop several times but the problem remains.
i bought my hp pavilion dv6 laptop in 2010 and the warranty went out on 2011, i turn on my laptop and i only get the quick web. Every time i try to start window it tells me it cant. i can not even get on safe mode. it asks me to repair my computer but every time i click on that i get a blank blue screen (baby blue color). i have tried to go on safe mode it wont let me, i tried to go on safe mode command prompt and it still wont let me,
I am using windows 7 32 bit on my computer. while booting my computer initial windows 7 logo appears with keyboard num lock lit; but after the logo stuff; the user choice screen should have appeared but; the num lock key goes off and doesn't re light and black screen appears. But it works fine with safe mode and safe mode with networking?? What could be the problem??
I'm having some trouble starting Windows. First I was having trouble with booting into safe mode so I done some Googling and I found this page and tried it [URL] now not only can I not start my PC in safemode but not in normal mode either, with checking the option for safe mode in msconfig it now keeps trying to start my PC in safe mode over and over again. I also cannot start my PC with the last known configuration.
I tried repair my PC with my DVD but that cannot fix it. There is no system restore point or recovery saved.
I have recently noticed the last couple of weeks that my computer is running slower than normal. In the last week. I noticed my anti-virus software from Norton is no longer working. When I tried to delete the file to re-download it the program would not delete from my computer. I tried to just update it from the internet the "Run; Save;Cancel menu appeared and when I clicked run nothing happened. I tried this function in safe mode with the same result.
Now my problem is affecting other programs like Microsoft and the shortcuts on my desktop. I have tried downloading the AVG anti virus I ran into the same problem. I am lost for options since it is not letting me run any programs on my computer. I can download programs just fine but thats it. I can use the internet just fine but I try to stay away from that since it leaves me open for more viruses. I need to know of other options that I can try.
Yesterday, I added malware bytes protection and also last night installed avg 2012. Ran scans, everything was moving faster. Shut down last night...and this morning windows will not come on in normal or safe mode. When try to start in safe mode it says STOP: c0000135 program cannot start %hs is missing. On another post with similar code it had a link to put on usb drive and to put in infected laptop and restart with f8. When I did that it said no bootable partition in table. When usb is not in it just goes back to stop message. I have a dell inspiron core i3 (I don't know if that matters). I have tried running restore to previous time and it did not work. when i click on repair it goes to the launch window or start in safe mode option?
Combo fix was run a couple times. It said not sure where download came from (was trying to get rid of security tool virus that was redirecting websites occasionally). But said It didn't remember any messages coming up, restarted. Everything was fine, installed malware bytes constant protection. Later that night I installed free avg 2012 and ran scans everything good. Computer ran great. Shut down at night. In morning windows would not load in regular or safe mode. When try to repair it goes to launch windows repair or start windows normally screen. When hit launch repair it goes back to that screen. If you start in safe mode it says that it is loading windows files then blue screen appears with "Stop: c0000135 program can not load %hs is missing."
my computer will not boot up normally or in the safet mode after installing Norton Power Eraser. Performed the following actions:1. Attempted to use System Restore, program will run but failed.2. System Repair also failed.3. Performed the following steps from your Forum Dated Feb 2012 (Computer will not boot after using NortonPower Eraser echnician is OH MYa. Diagnose Blue Screen Error 0x0000007b (0xFFFFFF88009A98E8, 0xFFFFFFFFC000000D, 0x0000000000000000, 0x0000000000000000.Performed a Chkdsk/r from Recovery Environment, no problems detected.Can only boot it up after reseting "/NOEXECUTE=OPTIN" all the time.
I have a Compaq persario CQ62 laptop i was on facebook about a week ago and signed out and my computer froze i powered it down and when i turned it on i thought it was going to start and then it went to a blue screen. I am doing this from another computer because i cant get that one to boot from anything disk or drive. I can not access safe mode or repair mode If i try to load safe mode it does not even show me the file its loading.
I tried to do a clean start up and still freezes. I've tried to restore it to previous settings and still having problems. Sometimes it freezes when i'm logging on and if i make it past that then it usually freezes within the next 1-3 minutes.
Computer Processor - Intel i7-260 3.4 ghz Ram - 8GB 64 bit Windows 7
I really would like to avoid having to completely erasing my Hard Drive.
Basically, I turned on my laptop and it automatically went on Safe mode and I can't get back to normal. The screen is also blurry and instead of the taskbar I can see the top of the screen...eugh.. If you get me. Should I reinstall my Windows? p.s. I don't have a disk for it, so I guess I will have to download a ISO or something. Will this get everything back to normal?
I have been getting BSOD errors whenever booting into regular mode. Safe mode is fine (I have tweaked the registry so I have sound in safe mode) My system specs are in my profile, but used Winaudit for full specs. The winaudit report in formatted text is too big for an attachment. I have 2 attachments to this post, including zipped up minidumps. Could my registry tweak for sound have something to do with this? Perfmon /report was run, but it says:
An error occured while attempting to generate the report. The system cannot find the path specified.
It started out of nowhere last week - computer restarted itself twice, then BSOD. When starting Windows normally, it would appear as soon as I logged in. However, computer ran fine in Safe Mode and also ran fine under normal conditions if the internet was unplugged. I eventually diagnosed that the issue was caused by an AVG module when it connected to the internet. So, I uninstalled AVG and verified that the computer ran fine while connected to the internet. I then reinstalled AVG, thinking I had solved the problem.
Now the BSOD appears as soon as I log into Windows (same as last time). Except this time, it appears even though I have again uninstalled AVG and disconnected the computer from the internet. It works fine in Safe Mode.
I am working with an emachine with windows 7 home premium installed. Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Home Premium, 64 bit Processor: AMD Athlon(tm) II X2 250u Processor, AMD64 Family 16 Model 6 Stepping 2 Processor Count: 2 RAM: 3839 Mb Graphics Card: NVIDIA GeForce 6150SE nForce 430, 256 Mb Hard Drives: C: Total - 703013 MB, Free - 637698 MB; Motherboard: eMachines, MCP61PM-GM Antivirus: None Was given machine with infections, tried to fix viruses with HDD installed but could not boot normal, only safe mode.Removed HDD and slaved to working system and ran virus scan. cleared 18 viruses, ran a second scan on drive and it came back clean (used norton antivirus)Loaded the HDD back into the machine and still can only boot into safe mode. Searched forums and saw similar issue and followed instructions listed below:Open Regedit.exe Navigate to HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSafeBoot Delete the subkey folder called OPTION Navigate to HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSession ManagerEnvironment Delete the value called SAFEBOOT_OPTION Reboot and done The problem is, there is no option subkey under HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSafeBoot I did delete the SAFEBOOT_OPTION under HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSession ManagerEnvironment and restarted. It booted in safemode and when I checked regedit again. the SAFEBOOT_OPTION under HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSession ManagerEnvironment was back and shows Minimal under it. I changed it to normal and restarted and it changes back to minimal after booting to safemode again.
When I turn it on, it loads the compaq screen, then says "windows is loading files". It then attempts to take me to the startup repair screen, but cannot load the startup repair options and just stays at a blue screen (NOT the blue screen of death).
I am unable to start the computer in safe mode as it gets to the same screen and does the same thing.
I have accessed the boot options screen and loaded windows from the disk in an attempt the repair it that way but I can not restore the computer from an earlier point in time and startup repair does nothing but search for problems for hours with no progress.
Im running windows 7 home edition 32bit The computer is a compaq presario CQ42
When I try to start my laptop, windows 7 hangs after a few seconds and i can only move the mouse. Ctrl-alt-del doesn't do anything either. It runs fine in safe mode though.
