Windows 7 Hard Drive Failure - Only Boots In Safe Mode?
Jul 31, 2012
After trying to scan my computer with tdskiller (I believe its called) to remove some viruses, I was asked to reboot. When I did, my backround desktop picture turned black, files seemed to be missing from my desktop and a window poped up scanning and telling me how many errors I had. Shortly after I got about 20 error pop up messages. I rebooted my computer and more files were missing to the point all I had was recycle bin, and two other programs.
Now the computer runs only in safe mode, No matter what I do (pressing f8 - start in normal mode) nothing works. I cant get internet access, and worst of all, I cant even system restore or even recover it back to to the malfunctioners option due to errors. I am stuck and do not know what else to try.
Ive tried the repair option in dos aswell and it just keeps me in the "Loading window files" screen, as I left it there for nearly four hours im guessing that was not going to work.
Windows 7 x64 does not boot into Safe Mode or Safe Mode with command prompt. Normal mode boots perfectly. Are there any suggestions on how to resolve this? I've tried startup repair and attempted fix boot, etc. No affect. The unit is free of infection. I also tried using SFC, but it said everything was fine.
Windows 7 will not boot into NORMAL mode. It will only boot into SAFE mode.This Windows does not provide the option: Boot into last good configuration....It only offers: SAFE SAFE with Networking normal In Safe Mode, I can not get Windows to react to a hard network connection.I don't know how to get out of the SAFE mode loop and force Windows back into NORMAL mode.
My PC only boots in safe mode. It works fine in safe mode. Otherwise , it stops at starting windows and does nothing else. I've backed up all data in safe mode. Now I want to delete everything and install a new version of windows 7. But when I try to install it (from usb) it freezes at starting windows also (it loads from usb). How can I delete my hard drive? (I don't have the thing to connect it to another computer)
Windows 7-32 only boots up to safe mode after installing Avast software? Tech support for Avast wanted $100.00 to fix and I only paid $20 for the Software?
I tried to install with my graphics card ATI ASUS EAH4350, but I couldn't install win 7. It stopped when "starting for first use" message. But I found solution to install Windows 7 in vga mode and it worked. Then again I put my graphics card and started win 7. It automatically installed vga driver and asked me to restart before I install ati catalyst driver from cd. After restarting when black screen comes before "win 7 welcome screen" it freezes with mouse pointer. It only starts in vga mode or safe mode. By the way I have win xp as well in c drive nad installed win 7 in h drive.
first i tried to install with my graphics card ATI ASUS EAH4350,but i couldnt install win 7. it stopped when "starting for first use" message. but i found solution to install Windows 7 in vga mode and it worked.
then again i put my graphics card and started win 7. it automatically installed vga driver and asked me to restart before i install ati catalyst driver from cd.after restarting when black screen comes before "win 7 welcome screen" it freezes with mouse pointer.
i have been searching many forums,but found no solution. it only starts in vga mode or safe mode. by the way i have win xp as well in c drive nad installed win 7 in h drive.
I am working with an emachine with windows 7 home premium installed. Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Home Premium, 64 bit Processor: AMD Athlon(tm) II X2 250u Processor, AMD64 Family 16 Model 6 Stepping 2 Processor Count: 2 RAM: 3839 Mb Graphics Card: NVIDIA GeForce 6150SE nForce 430, 256 Mb Hard Drives: C: Total - 703013 MB, Free - 637698 MB; Motherboard: eMachines, MCP61PM-GM Antivirus: None Was given machine with infections, tried to fix viruses with HDD installed but could not boot normal, only safe mode.Removed HDD and slaved to working system and ran virus scan. cleared 18 viruses, ran a second scan on drive and it came back clean (used norton antivirus)Loaded the HDD back into the machine and still can only boot into safe mode. Searched forums and saw similar issue and followed instructions listed below:Open Regedit.exe Navigate to HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSafeBoot Delete the subkey folder called OPTION Navigate to HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSession ManagerEnvironment Delete the value called SAFEBOOT_OPTION Reboot and done The problem is, there is no option subkey under HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSafeBoot I did delete the SAFEBOOT_OPTION under HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSession ManagerEnvironment and restarted. It booted in safemode and when I checked regedit again. the SAFEBOOT_OPTION under HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSession ManagerEnvironment was back and shows Minimal under it. I changed it to normal and restarted and it changes back to minimal after booting to safemode again.
i was using my HP 2711x last night and it was working wonderfully, and today i turn it on to do some homework and it doesn't show me the login screen, it's just black. and then i try it in safe mode and it works, what could be the problem? and can you explain step by step so i don't miss anything
It started out of nowhere last week - computer restarted itself twice, then BSOD. When starting Windows normally, it would appear as soon as I logged in. However, computer ran fine in Safe Mode and also ran fine under normal conditions if the internet was unplugged. I eventually diagnosed that the issue was caused by an AVG module when it connected to the internet. So, I uninstalled AVG and verified that the computer ran fine while connected to the internet. I then reinstalled AVG, thinking I had solved the problem.
Now the BSOD appears as soon as I log into Windows (same as last time). Except this time, it appears even though I have again uninstalled AVG and disconnected the computer from the internet. It works fine in Safe Mode.
Everything was working however now I can only boot into safe mode regular or networking. When I try to boot normal either it reboots or goes into recovery mode.
My dad's hard computer crashed, and we've spent the better half of 12 hours trying to recover about 30 gigs of music off of it. The problem is that the Windows repair stuff that came with our Windows 7 Ultimate isn't helping AT ALL, neither is repair disks, or any other junk that you can think of (and believe me, we've tried it all). When we try to boot the hard drive we get a "Error Configuring System" message, and when we've tried to run Safe Mode by holding f8, it doesn't allow us to. Now, we've also tried running an alternate boot source from the BIOS menu, then holding f8 to see if it'll give us advanced BIOS options and allow us to get to safe mode that way... but to no avail.
I successfully installed Windows 7 64bit in AHCI mode on a PC with 3 new 3TB Western Digital WD30EZRX Caviar Green hard drives.Then I installed "Intel Matrix Storage Manager Driver [v8.9.0.1023]" & as soon as Windows restarted after installing it, Windows would not boot, & will now only boot in IDE mode.In IDE mode I have to do a system restore to the point before installation of "Intel Matrix Storage Manager Driver" to be able to boot again in AHCI mode.
I just turned on my laptop on and it wouldnt go past the "starting windows" logo. So I restarted my computer and it gave me an option to repair start up option and once the repair finished it said it has failed to solve the issue and it pop up a Windows System Recovery which is always good if I wanted to restore it to the factory state unfortunately I have about 30 GB more or less data on this laptop that is basically my life and wanted to retrieve the data.
It also gave me an option for command prompt so i went and run "chkdsk" it got to 49% and from there it kept on listing the entries on the disk and numbers that its got errors on, I didn't quiet finished the disk check and turned my laptop off. Reason being it was 4 AM in the morning. I have been using my laptop for over 2-3 years and by use I mean it has been online almost 80% of the time more or less.
Is it hard drive failure? If so is there a way I could retrieve any data from it? I know there are software that you can boot from CD or USB to salvage what ever data is left or readable, however the data is somewhat precious to me and dont want to do further damage. I would have gone to an professional and gave it to them but I can't afford it. I'm going to change the hard drive into a different laptop to check if its truely an hard drive problem related.
My system is Dell Inspiron 17R SE (7720), 1 TB Hard Disk 5400 rpm + 32 GB mSATA, 8 GB RAM, 3rd Gen i7. I was trying to make a bootable USB flash drive for windows 7 from Windows 7 Home Premium Reinstall disk that came with my Dell laptop, using the WinToFlash utility. But in starting the process, the PC froze, all applications (even explorer.exe) stopped, and Alt+Ctrl+Del refused to work. I turned the laptop off and back on, where it refused to even show the OS list and showed a DRMK message instead with a command prompt C:> as:
Loading DRMK V8.00... DRMK Version 8.00 COMMAND.COM Build 37 - Jul 28, 2008 DRMK KERNEL Build 15 - Aug 8, 2008 Copyright (c) 2006-2008 Dell Inc. All rights reserved. C:>
I tried booting from Windows 7 reinstall DVD but none of the repair options worked. I tried reinstall and repair options but my Hard Drive did not show up. It rather asked to Load Drivers for the Hard Disk. However, it did show any of the USB drives I connected to it, along with an X: drive, which must be the recovery drive for Dell's factory restore. I tried looking for Hard Disk drivers in that but no luck.
Then I downloaded from another PC a USB utility for Seagate Hard Drives from Dell website that makes a bootable USB. I ran that utility and it showed all the test passed (But there was no firmware update during the tests). Another thing I tried was using list disk command on command prompt in Windows Repair, but It did not show any drives, not even the X: drive. It only showed the USB drives I attached to it, or the DVD drive in list volume command.
I cannot boot to windows, I cannot install new windows, I cannot repair the windows and I cannot even factory restore my laptop. The hard drive shows up in BIOS, but not in Windows Boot or Windows Installation. Is there any way I can get my Hard Disk back without losing data? I have two partitions of that drive. I don't care about formatting C: Drive (Windows) but I wanna preserve E: Drive (the one filled with personal data but no programs).
I had assisting my cousin get his laptop running. He actually went and got a WD backup drive. He has been running good. Has a tendency to overdue the AV scans, Malware Scans and CCleaner Scans. Anyway, he booted yesterday and a timed to start on "Boot Normally" with safe mode and safe mode with network etc: screen came up. He advised he got logged on and ran everything for anything with no luck. Every time he reboots ( 2-3 times ) it came up as described. I had him do a chkdsk. When it finished it booted normally and has several times since. Since this is the condition the computer was in prior to me helping him a month ago, I thought as a minor leaguer, that I'd inquire with the forum members. Is it possible his toshiba laptop which originally ran Vista, he got it dumped for Windows 7 Home Premium, has the 160 GB Hard drive beginning to croak.
A few months ago I made the mistake of buying a used hard drive off Ebay. Last night it died on me and at the moment its in the freezer because Ive heard that freezing the drive can get it up and running long enough to get data recovered.
After attempting to start my Laptop in Safe Mode, it loaded drivers normally only to crash a few seconds later. A prompt message appears but is impossible to read because Windows immediately reboots upon showing the prompt.
I was wondering if you could provide me with some feedback on a hard drive issue that started when I booted up my pc yesterday. Hard Drive is WD 160GB SATA.
I received this error at boot up:
Read Disk Error CTRL+ALT+DEL to restart
I restarted and luckily I was able to get to the desktop (took longer then normal tho).
Decided to double check all the connections... all plugged in nice and secure. Rebooted. Got the Read Disk Error again. this time it took me 3x to get to desktop. I decided to try another SATA connection on motherboard. REbooted.... got error again.
I ran a chkdsk/r and when system rebooted the Read Disk error showed up again.
After another 3 ctrl+alt+del reboots... I was able to get into Windows. I downloaded the Diagnostic Tools from WD and my drive failed both the Quick and Extended Tests. Not surprising lol
Anyhoo, here is a screenshot of my WD Diagnostic test results. I was wondering if it was a HDD issue or a motherboard issue? Any thoughts? I would rather replace a HDD then a motherboard. This WD 160 SATA drive is less then a month old also. BIOS sees the hard drive.also tried setting BIOS back to default.... sometimes that works but not this time.
It occured when i tried to open internet explorer while google chrome was downloading a file. However, I have always been able to do this when I attempted it previously, so I am not sure what made this time different, but after i clicked on internet explorer, everything i had open got immediately closed, my screen flashed black, and when it was back at my desktop, all my icons were gone aside from Recycling bin, Microsoft Word, and Powerpoint, and like 50 little message windows opened one after the other saying that files may have been lost because of damage done to the C drive. I cannot preform a system restore because it says there are no previous restore points, and all of my files (documents, pictures, downloads, music, programs) are no longer on my computer for some reason? Is this just a problem with my C drive that can be fixed and restored? Or are all of my files gone for good? Also, my PCtools Spy Doctor ran a scan and said: Adware.BHO.GEN (20 Infections) - High Threat.
I've got a Dell desktop that will not boot, gives the message Drive 0 Seek Failure.I was able to boot to a linux disk and copy files, so the drive is spinning. I ran the built in Dell hard drive diagnostics, the hard drive passed. I also ran the Hitachi Drive Fitness test, and it passed.I assume maybe it just needs some repair to the boot sector?
I have just bought a brand new hard drive due to my last ones controller failed.
Western Digital Caviar Black 500gb
So the problem,
Did a fresh install of win 7 (Build 7229) two nights ago, all installed perfectly, next day (yesterday) went to boot up pc and had the dos error message - Disk boot failure, please insert system disk and press enter.
My first impression was it may have been an install failure, so i formatted the hard drive and reinstalled. shutdown the PC and rebooted up and i had the same error message, now after this, i got my failed hard drive out and after a lot of faffing around, BIOS found it and it gave me the same error message.
Can anyone tell me what the problem might be. I have tried Windows startup repair, did not fix.
BIOS settings are
First boot device is Hard drive
second boot device is CD-ROM
(I have even swapped these around to boot from windows 7 and it just starts the setup procedure of installing windows drivers) I have even set boot order of HDDs so my main windows HDD is up top. Anyone got any clues.
i had a virus and used norton to clean out and laptop went to blue screen and then started norton recovery, since then i cannot access the hard drive in the laptop or via a caddy. just says unable to load driver..
I used clonezilla to copy the data on my laptop drive to an external 640gb drive I had. The cloning process went fine but when I went to boot on the 640gb drive I (expectantly) got a blue screen error. Now, the way to fix this would be to boot into safe mode and delete the drivers but for some reason every time I boot and press the f8 button it brings me into the Windows Error Recovery mode menu which has no options for safe mode and doesn't help at all.
I was normally using my computer, when I suddenly noticed one of my hard drives disappeared from My Computer. Checked the Device Manager, I get the following. Trying to initialize it throws up this error: Seems to spin just fine. Trying different USB ports failed, switching cables as well. Already tried a few programs. GetDataBack for NTFS throws up error 1117. R-Studio also fails, as does DMDE and MTY. My friend even borrowed me Microsoft DaRT (part of MDOP), but when I boot into it, it doesn't recognize the HDD at all, no matter how hard I try. Only my Windows 7 installation does.Anything I can do in this situation? I had a lot of important data on it, and it's not completely dead yet. Maybe I can still save it somehow, without haivng to pay one of those data recovery thieves...
I have raid 5 setup, on a ASUS P5K WS motherboard using matrix storage manager. Just copied everything on to it, now a hard drive has failed. I got new hard drive but its seen as none Raid and raid showing as failure ?
I have a HP Pavilion dv6 laptop and getting alerts saying the hard drive is failing. I've pushed all my data up to NAS storage and will install a new hard disk but... How can I get a replacement of Windows 7 Home Premium. With the drive failing, Windows is becoming unstable and I need to do a fresh install on the new drive once it's installed.