Cannot Detect One Particular Wireless Network - Others Fine Running Windows 7
Oct 24, 2010
I have just moved house and been given the internet details by the landlord. The provider is Virgin and the landlord asked for my MAC addresses of each device to allow access to the internet and gave me the password. I managed to connect on my iPhone and my housemate who is also running windows 7 off a laptop can also connect. However the network does not even appear in my wireless list. Several other wireless networks in the area are being detected but not the one in the house. I know it's not hidden as I can connect on other devices.
I have tried a manual setup with the network name, encryption etc and tick "allow connection even when network is hidden" but all to no avail. Unfortunately I have no access to the router as the landlord has that next door, however seems strange it would be a router issue if the other devices connect fine. I have been through all the settings with my housemate and ensured we have the same setup and am now thoroughly baffled and annoyed.
I have just installed Windows 7 onto my Dell Inspiron 6400 laptop. My laptop now detects a number of wireless networks in the vicinity but not my own. It is not a problem with my router because other laptops can pick up the connection no problem. I have Googled this problem and see a lot on issues with Windows 7 and picking up wireless signals. But I haven't seen any threads which deal specifically with the situation where only one wireless network cannot be detected.
A few months later i wanted to upgrade my 32 bit to 64, since i could only use 3,16 GB ram, and my computer has 8GB. So i bought a win 7 home premium 64 bit and installed it. Now i face the same problem, my computer can not detect any wireless network adapter, though i'm 99% sure that my computer has one.
USB wireless adapter is dlink DWA-130C, driver installed properly and windows 7 32bit detected it correctly as DWA-130C on device manager but it could not find any network in my area.
When I do troubleshoot, windows tell me that driver may not installed properly.
FYI it happened with my older G USB adapter too, when I uninstall the driver to update, it installed normally but then it does not detect any network. I have to do system restore to make it work again.
My laptop cannot detect any wireless right now, though the others are connecting normally. But when I plugged the cable network in, my laptop can connect to wired network. Previously, it could be able to connect to wifi, but suddenly, the wifi is like hidden from it. I also tried to check the wireless drivers but I couldn't find any.
Windows IP Configuration Host Name . . . . . . . . . . . . : Windows 7-UTI-PC Primary Dns Suffix . . . . . . . :
The title suggests i need to setup my networks so that they are both working harmoniously together.The reason i need this is because on the wireless side i need to connect to my router for internet access.On the wired side i need to connect to my NAS. I have tried connecting the NAS box to the router and it works but it is too slow.
So, upon receiving a new Asus G53SW-XN1 laptop, I promptly put in a smallish SSD to serve as a Windows/common apps drive, moving the HDD to the other hard drive slot.
Fresh install of Windows 7, etc. At the moment, Windows will not boot up - no splash screen, no opportunity for Safe Mode, etc. But Windows is perfectly happy to run - if I boot off a CD, then hit 'Restart', everything starts up fine. The Repair Windows Installation option on the CD sees the Windows installation okay, and when asked to repair says 'no problems are found', and happily reboots. Some sort of MBR/partition issue that the Repair doesn't detect?
Well I will get right to it. Its a desktop I built about 4 mths ago. I was goofing off all day, ran perfect. I got my package from Tiger.com, yay new memory. I also bought a drawing tablet that came w/ photoshop ele 8 and artrage. I promptly shut down my system, installed the new stick of matching memory, Corsair DDR3 4g 1600mhz, in slot two and four, with the old stick. I was only running one stick due to an order error. I reboot. The system recognizes it, runs fine. I install photoshop ele 8 and art rage along with an update to java. So far no problems. I turn the system off to plug in the drawing tablet per the instructions it came with. When it goes to reboot, i get to the windows loading screen, the animation just starts to load when i get a flash BSOD then the moniter shuts off to no signal and the computer just sits there fans and all running. I am using Win 7 home premium 64. I can get into BIOS. I have run the launch repair. I have tried putting the memory back to the previous configuration. I have run the memory diagnostic tool. I have tried system restore but no points to restore. I have tried to repair install with Windows disc, says disc is incompatible with current version, its the same disc i used to install windows the first time. I have tried to reinstall windows twice, still does it. I have attempted to make a repair disc, didnt work. If you can tell me how to get dump files from this state i would be happy to do so. If it helps at all i am using an SSD as my main hard disk, i have a second drive but there is nothing on it atm. I am just at a loss, i know a good bit about computers but not far enough, lol. My desktop is my baby and i really wanna get it up and running again.
All of a sudden on my Windows 7 ultimate 64bit, my Windows started to run so slow to the point where I can basically not even use it. All the stats show my RAM registering fine(4gb) and I just can't find what the problem will be. In its normal mode, it will take around 20min just to get to the front screen and is super slow when it comes to opening programs as well. It seems to run safe mode fine though, with speeds that I am used to.
my pc was running fine. i was playing a game for a few hours. i then left the room for a few mins n when i returned to my pc it had shut down. i tried to turn it bk on and nothin. no fans leds nothing. i unplugged everything for a min then plugged bk in and retried to power up. nothing....so i unplugged everythin again n went to bed. then this morning i plugged everythin bk in hit the power switch n guess wot. it booted up with the usual options after an unexpected shut down. safe mode, safe mode with netwrk n so on.so i booted into safe mode n all was fine.
I have an 802.11n Wireless LAN card, but Windows is not detecting it. When I go to set up a network, I get the "it may take up to 90 seconds to detect your network" screen, but it never finds it.
I'm very tired of seeing this message booting me to desktop just to ask me if I want to change the color scheme because it perceives my computer is running slow. Load up Batman AC? 10 minutes in focus changes from said full-screen app to this completely unnecessary 'warning'. Battlefield 3? Same thing. Assassin's Creed? Same thing. Skyrim? Same thing.... I don't need Windows to tell me that my resources are being used when I know they are being used. Am I really going to have to go into Properties and Compatibility mode for every game I play? I have clicked that button so many times yet it continues to show! It specifically says "Keep the current color scheme and don't show this message again" Yet even after clicking said button it still shows...
For the past few weeks I have been having problems with my HP laptop.
For starters my laptop will not restart. I try to restart it and it shuts down, but won't reboot all of the way. It gets stuck on the black screen you get just before the HP sceens comes up. So I have to press the power button ( after which I do, I get a loud POP sound before the computer shuts off ) and then turn it on again myself. Also, if my computer goes in to sleep mode due to inactivity, it will not wake up. I have to press the power button to turn it off, and then start it up again.
After this happens, my laptop cannot detect any networks. I have to unplug the charger, and then I have to take out the battery and put it back in before it detects networks.
I took it to best buy ( where I bought the computer and have a warranty at ) and they did a diagnostic test and determined that I had several viruses causing the problems. After paying 200 bucks they ''fixed'' my computer and I brought it home, only to have the same exact problems I was having before.
so i finally decided to install Windows 7 x86 - everything went well - put all the standard stuff on there etc - i rebooted many times because of installations and updates
on my last reboot it just got stock in the bios screen (verifying dmi pool data..success! etc)
so i rebooted, same thing, took the disc out, same thing - turned off boot devices same thing
tried to use window's useless repair tools (whatever happened to repair install?) which didn't help - so i decided to format and reinstall - then it says it was unable to do that (partition error or something)
the annoying this is...is that this EXACT..i mean EXACT same thing happened when i installed vista sp1 from scratch - this happened - and to fix it i had to leave my pc open overnight with the hard drive cables all unplugged..in the morning with my fingers crossed i tried the installation again - and it worked.
my d: always disappears (single hard disk sata 233gig (250)) - sometimes it'll vanish from my computer and stuff - but this can't be the problem because the d: is a single drive on its own - my c: is a25gig partition from my e: - so it's completely unrelated.
does it matter how i replug the sata cables (2 of them) into the mother board? - they're both being recognised anyway
this is really annoying though - mostly because there isn't really an explanation - and because this random stuff always happens to my pc! - is it my hard drive because that's the only thing that would half- make sense
I installed a microsoft mouse and when I did the restart my wireless completely dissapered. I can get a conection using a cable, and the wire less signal is there because I am on in now (android) So... I`ll list every thing I've already tried so not to waste anyones time. After the Complete system restore...which I saw the wireless stuff reinstall I thought I was gtg..but sadly not even that worked. I looked up the drivers and tried installing, that failed. When you look in the device manager there is no wireless adapter It's an Acer Aspire 5253, win 7/64
I have a 1 yr old dell vostro 3400 and for most of that year the wireless worked perfectly. Recently I have no wireless: I cannot set up or connect to anything, and nothing is visible. When I go to control panel etwork and internetmanage wireless networks, is says "Wireless is not currently enabled." I know about the little toggle on the laptop's exterior, and that is in the correct setting. I ran a hardware check from the BIOS and all relevant hardware is properly working. When I go to registry editor though, some of the files in SystemCurrentControlSetservicesWlansvsParameters have no values set to them (I didn't set them like that). how I can reenable wireless or is there a list of default working values for those files?
one of my user's laptop wireless is working properly until the laptop can't see any wireless. i already checked the settings of the laptop, even if the wireless is set to broadcast, i cant see or connect to any wireless..under control panel > network and internet > network and sharing center, on the left side of the screen i can't see the option "manage wireless settings". that's why i cant add any SSID of the router. i already checked the drivers and update it but still theres no wireless detected. when i run the windows troubleshoot i got this error saying "windows could'nt automatically bind the ip protocol stack to the network adapter".
I purchased a new laptop, and have been having numerous issues with windows 7, including the wireless internet being insanely slow. I've tried other wireless adapters to no avail, and every other computer in the house, be it wireless, or not runs perfectly, with the speed tests all running about the same, while this laptop runs at about 1/4 of the speed. I can only assume it's some sort windows settings, and not anything to do with the ISP or the router because of such.To add, and I don't know if this will be of any use, but while doing regular browsing, the speeds are fine, you can't really notice a slowdown. But when viewing videos or downloads, it tanks. I've noticed my download speeds start out, and stay at their max speed (about 1.1MBps) for say 5 seconds, only to sink to about 250-300KBps for the remainder.
My desktop (windows 7 ultimate 64bit) has been able to connect fine to the internet until I got home from work this morning. My laptop is connecting to the same modem fine through wireless (along with my wii). The modem I am using is Motorola SB 901. When I rightclick my connection on my desktop and hit troubleshoot problems, I get 'local area connection 2 doesn't have a valid ip configuration'. Same thing happens when I switch the ethernet cord to local area connection 1. When I go to control panel, network and internet, network and sharing, the connection map at the top stops between my pc and the network (which is now labeled as 'unidentified network'). Here is a list of what I have done so far to try and resolve the issue:
1. Replaced the ethernet cord with one I know is working
2. Full scanned my pc for viruses
3. Disabled all firewalls and virus protection programs
4. Restored my pc to a previous save state
5. Reset winsock with cmd via these prompts: netsh winsock reset catalog and netsh int ip reset reset.log hit
6. This attempt is unfinished as I am getting stuck. I am attempting to setup a static ip to attempt to resolve the issue, but when I open cmd and type ipconfig/all, the default gateway under my local area connection is completely blank.Here is what comes up with ipconfig/all:
C:UsersPaul>ipconfig/all Windows IP Configuration Host Name . . . . . . . . . . . . : Paul-PC Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid
I have recently installed Windows 7 Ultimate 32bit, but when i inserted my Compaq Wireless adapter (network receiver or whatever it's called), USB, to connect my computer to my wireless network, windows doesn't detect it. It has worked fine on Windows XP on the very same computer, but now - nothing.
I recently bought a TP-LINK TL-WN350GD wireless network card, inserted it into a PCI-E slot and installed the drivers, but can't seem to get it to work. It appears in Device Manager as 'Atheros AR5007G Wireless Network Adapter' and apparently 'this device is working properly', but infuriatingly it won't detect any wireless networks. I've tried using the drivers that Windows 7 installed automatically and also the drivers that came on the disk with it, but all to no avail. When I troubleshoot the card, I get the message that 'there might be a problem with the driver for the Wireless Network Connection 2 adapter', but this is all I can find. It's especially irritating as I picked the (admittedly lower-end) card because it's definitely compatible with Windows 7 (I already tried one which wasn't).My PC has Windows 7 64-bit, has an AMD Athlon 4600 dual core CPU and 2 gigs of RAM.
I've been searching through some threads but I can't seem to find the answer to my problem.. Or I'm just dense.I just downloaded Windows 7 and I can connect to the internet with my ethernet cord but not using wireless. Before I downloaded 7 I could connect easily with Vista and had no problem detecting wireless networks..
I have a problem with my wireless internet card (Qualcomm Atheros Ar9485). It has trouble connecting to websites. Speed and ping is fine, but it is the connecting that often fails. I have done tests on my other computer and on my iPad, and everything works fine. I know that there is something wrong with the wifi card, because when I plug in my ethernet cable, everything works fine. My wifi drivers are up to date. I can still browse the web wirelessly, but 30-60% of the time, the connecting fails. I have had this kind of issue before (All browser slow/not loading pages) and I got the problem solved by switching wifi channels.
I recently bypassed my previous BSOD issue by simply replacing my HDD with a SSD and doing a fresh install of Windows 7 64bit Pro.
Where the computer is currently located, I need to run wireless internet. To do this, I have used a NetGear wireless adapter "WNDA3100v2". It's a nice adapter, and it's worked fine for about 2 years, including immediately prior to adding my new SSD.
So I fire up my fresh copy of windows, and install my critical software. Once all of that is sorted, I go to install the drivers from the CD. I insert the USB adapter, and click next.
As soon as the adapter is inserted, Windows begins searching for a driver which fails. On the same instant that I click next, the proprietary software for the device says "detecting". This stays this way infinitely it seems, and never detects the device. If I just yank the adapter out, it will say "failed to detect", so this leads me to believe it is at least aware that it's there?
I tried to backdoor it, and ran a wired connection through my window, down the outside of the house, to my router LOL, and forced Windows to search for it's own updated driver. On most occasions, it just says "failed", but I was able to get it to find one last night, and it downloaded to 100% before it just hung up for a while, and then "failed".
Right, just a few days ago without making any changes, I can no longer detect the wireless connection in my house (which is definitely still working as it comes up on my phone).
I just reinstalled windows 7 ultimate 32 bit (I have the disc) but I cant connct to internet for it says there is no properly installed network adapter. o.Windows 7 Ultimate x32Version 6.1.7600 build 6700Intel Pentium (r) dual core cpu E5700 @ 3.0GHzBios version/date : American megatrends Inc. 080015,1/17/2011Problem Devices thernet Controlled PCIVEN_1969&Dev .. Etc..The drivers for this device are not installed
I have Windows 7 Ultimate. I always have ran Malwarebytes Daily and RegCure.I had a trojan make it past Malwarebytes so I decided to give Avast a try. Didnt like Avast so I uninstalled it and went back with Malwarebytes. Malwarebytes didnt get it out, so I have Hitman Pro when I need it. Got the 2012 Trojan out. Now when windows loads it fails to load my Proxy Settings. Then I run the troubleshooter and it tells me this: Windows could not automatically detect this network's proxy settings So I tried all the netsh resets and it didnt help. Tried winsock. Nothing helped. Went into DevManager and nothing is grayed and no exclamations.I uninstalled the drivers for the net card and wifi card and restarted to let them reinstall. Nothing still. I opened Network Connections, NOTHING shows up. I also overwrote the Sys32 file nlasvc.dll and nothing happened.
My computer is on the internet, which is working fine - except that if I go to the Network and Sharing Center, it says that I am not connected to a network. The major problem this is causing is the fact that I can't use Windows Media Center to stream anything over to my Xbox, because it says that I'm not connected to a network: Running the troubleshooter does nothing.So far I've: Uninstalled drivers, and reinstalled from my Motherboard's disc which was working fine inititallyUninstalled Apple's Bonjour applicationDisabled and re-enabled the network adapter multiple timesRan ROUTE DELETE 0.0.0.0 for the hell of it because I read that somewhereNothing has worked.
