Installation Gone Fine But Screen Appears Indefinitely
Nov 2, 2012
After about 2-3 hours I had everything installed, powered up just fine, popped in the windows 7 disc and started installation. Everything ran smoothly until first restart. It went to the screen where the colors fly in to form the Windows logo and says starting windows and then just sits at that screen indefinately. I've searched numerous forums trying to find an answer but I haven't found any with the exact problem i'm having.
View 4 Replies
ADVERTISEMENT
May 20, 2009
so i finally decided to install Windows 7 x86 - everything went well - put all the standard stuff on there etc - i rebooted many times because of installations and updates
on my last reboot it just got stock in the bios screen (verifying dmi pool data..success! etc)
so i rebooted, same thing, took the disc out, same thing - turned off boot devices same thing
tried to use window's useless repair tools (whatever happened to repair install?) which didn't help - so i decided to format and reinstall - then it says it was unable to do that (partition error or something)
the annoying this is...is that this EXACT..i mean EXACT same thing happened when i installed vista sp1 from scratch - this happened - and to fix it i had to leave my pc open overnight with the hard drive cables all unplugged..in the morning with my fingers crossed i tried the installation again - and it worked.
my d: always disappears (single hard disk sata 233gig (250)) - sometimes it'll vanish from my computer and stuff - but this can't be the problem because the d: is a single drive on its own - my c: is a25gig partition from my e: - so it's completely unrelated.
does it matter how i replug the sata cables (2 of them) into the mother board? - they're both being recognised anyway
this is really annoying though - mostly because there isn't really an explanation - and because this random stuff always happens to my pc! - is it my hard drive because that's the only thing that would half- make sense
View 5 Replies
View Related
Nov 7, 2012
My computer has had problems starting up. On some occasions, I will get to the Welcome screen, and it will just sit there as long as I keep the computer on. Sometimes, it will get past the Welcome screen only to get to a black screen with no desktop or toolbar. To get it to work, I have to start the computer in safe mode and then restart it. I thought it was a virus, so I did a scan with my antivirus (Avast) but it did not detect anything.
View 7 Replies
View Related
Dec 14, 2011
Initially, it only appeared on first boot (before Windows logo loading screen) and after restart system booted up normally. For some 4-5 days now, it crashes with a BSOD and after restart the system freezes on desktop. One more restart and works again.Sometimes just a black screen appears and everything stops, before the desktop is loaded.It has also happened that the laptop hangs on BIOS logo.BSOD error messages I managed to record are1) IRQL_NOT_LESS_OR_EQUAL 0x000000D1 [...] igdlkmd32.sys2) BUGCODE_USB_DRIVER STOP 0x000000FE [...] USBPORT.SYS3) Empty BSOD with only 1 line: 'STOP 0x000000314) MEMORY MANAGEMENT 0x0000001AI updated the drivers with Driver Genius, some other driver update software and also performed some online driver scans.Memtest results - No errors found.Ran thorough diskcheck in Windows.Windows was reinstalled recently, problems remained.The system has been sent for diagnostics and repair several times, specialists say they see nothing wrong with it. And when I take it home it crashes again.
View 4 Replies
View Related
Sep 21, 2009
I have two machines that I've installed Windows 7 Professional 32-bit on and I'm having the same problem on both. When I turn on my computer it goes to the login welcome screen and stops. I have to click on my picture for it to continue logging into the desktop. I have no password and only one admin account set up on either one.
I tried setting up the auto login using netplwiz in the search bar but it doesn't do anything. I set up a password and set up the autologin and it didn't work on either machine. So now I'm back to no password and in need of help. Anyone got any ideas?
View 4 Replies
View Related
Dec 2, 2012
i would leave a laptop i have over night and use it the very next morning without having to loggon to it again , interesting enough when i leave it unattended often i get the loggon screen showing at random times - knowing that i do not get logged out from account - when left unattended , here are the steps i checked to insure i am not being hacked :
1 - avg internet security business edition 2012
2 - screen saver is checked where it would not put log in screen back on resume
3 - checking that allow remote assistance and remote desktop disabled and yet i still get this random event , any thoughts to how it might be generated or what to check ?
View 1 Replies
View Related
Dec 16, 2011
I cant restart my dell vostro 400 every time I turn it off or restart it a blue screen appears system fans are still working. My PC is vostro 400 dell 3.0 c2d e8400 4gb of ram 250gb of hard drive.
View 1 Replies
View Related
Aug 3, 2012
Since yesterday I have been unable to make contact with my WiFi. Everything else seemed to be running fine. I decided to try a System Restore and go back two days. I started it two hours ago and it's still running. I have a feeling this System Restore will never end. I made almost no changes in the past few days. I can restore from my backup but I am beginning to think this may be a hardware problem. I am using a different computer to log this message. Windows 7 Home Premium SP1, 32 bit, 4gb
View 2 Replies
View Related
Oct 11, 2012
I am trying to re-image a laptop but both with a USB or a CD when it is loading up the install it just gets stuck with the loading graphic just going and going and going....I've replaced the hard drive on this laptop already, but I've used the same CD and USB to re-image other PC's.
View 2 Replies
View Related
Feb 16, 2012
I'm having BSOD while playing Battlefield 3 every 30 minutes, it is realy anoying . I keep my drivers updated , i cleaned my whole PC and defragmented hard disk and cleaned regist files . well it did increase my. performance but BSOD is still there, i stll expiriencing BSOD while playing Battlefield 3. I attached my dump files
View 1 Replies
View Related
Apr 6, 2011
this started a few days ago(when i inserted a memory card). Now Wn i start my compaq presario CQ 40- 732 tu. Aftr booting there appears a blue screen and my laptop restarts and i had to work in SAFE MODE which is really annoying. I had tried system restore but there appears no restore points and neither a new restore point is created.he details being there are as.. . . . . . . . . . . . . Problem signature . . . Problem event name= Blue Screen o s version =6.1.7600.2.0.0.256.1locale id =16393 additional information B.C CODE =10000001 BCP1 =10000004, BCP2 =10000002, BCP3 =00000000, BCP4 =8B63BB02.
View 1 Replies
View Related
Dec 16, 2011
I just installed NFS the Run and Battlefield 3 on my windows 7 Dell XPS, the game showed me an error and asked me to download driver version 259.38 from the nvidia website, I did so and the game started working, but not properly. Anyway, so I restarted my laptop and after the 'starting windows' screen, it went blank, the blue log in screen never came (i could hear the tune though).Then i restored my system to a previous date (thereby uninstalling the new driver) and now the system is working but the game is showing the same error again
View 1 Replies
View Related
Apr 6, 2012
3-year-old ASUS laptop running Windows 7 64-bit. I recently went through a fresh install of Windows 7 due to a major driver corruption caused by a Windows Update. Since reinstalling, various programs seem to get stuck indefinitely and nothing I can do will close them. For clarity, I'll give an example of what usually happens:
1. Program locks up
2. I try to close it. Nothing happens.
3. I try to end the application in the Task Manager. Nothing happens.
4. I try to end the process and/or process tree in Task Manager. Nothing happens.
5. I try to shut down the computer. It hangs on the "Logging Off" screen indefinitely (let it sit overnight to test).
6. I end up manually powering down the computer.
When I restart, one of several things happens with no pattern I can find:
A. It starts up normally.
B. It starts up but very slowly (maybe 10 minutes to get fully booted).
C. It hangs indefinitely at the Windows "flag" loading screen.
D. I enter startup repair (usually after "C." happens) and either startup repair hangs indefinitely or (if it loads) it can find nothing wrong or can't fix the problem.
Offending programs have included Windows Media Player, Media Player Classic, Open Office, Windows Explorer, iTunes, and Firefox, to name a few.
I use Avast! as my primary protection and it can find no problems. I've also run MalwareBytes with no success. Since it's a fresh install of Windows 7 (just a couple weeks old) and I haven't really done much downloading or exotic surfing, I have to think there's a deep-seated problem going on here. Please help before I go insane!
View 9 Replies
View Related
May 17, 2012
My Windows 7 boot normal and after Windows Starting logo appear, blue screen appear quickly so much that I can't see what's message and restart. I tried repaid and fixmbr and fixboot, no way.
View 9 Replies
View Related
May 22, 2012
I am working on a friend's Compaq Presario CQ-62-231NR laptop. It runs Windows 7, 64bit.The computer was purchased about a year and a half ago. When I startup the computer I get the screen saying the computer wasn't shut down properly before....do you want to start up in safe mode, etc. No matter which option I choose it freezes shortly after the welcome screen comes up. Its within seconds. Any advice on how I could resolve this problem? The Windows 7 software was installed prior to purchase and she never created a system restore disc...so I do not have any software discs to reinstall with
View 1 Replies
View Related
Apr 29, 2012
I'm weeks of spasmodic attempts into replacing my old C-drive with a new SSD and a clean install of Windows 7, 32 bit. Here's the current loop: Following Sandisk's instructions on formatting SSD for use as OS with Win 7:
1) I verify BIOS - SATA is (as before) set to ACHI
2) I place Windows 7 upgrade disc in drive, hoping to use "Option 1 - normal clean install" (from Clean Install with a Upgrade Windows 7 Version )
3) I get "Windows Error Recovery" screen, stating "windows did not shut down normally" (white text on black screen), with two options - start normally, or startup repair.
- if I select "start normally," it merely returns (after a minute or two) to the same Error Recovery screen after some POSTs (nothing other than single-beep) - no request for my input, no "press any key," etc.
- if I select default ("startup repair") option load: "Windows cannot repair this computer automatically" ultimately results after a lot of attempting to repair, etc.
PC will still run Ok from old HD when connected, and shows the SSD in Disk Management with a "System Reserved" 100 MB (F) partition along with a 112GB (E) partition. I keep thinking I need to wipe those and try again, but not sure how or if that's even worth trying. I did have the same SSD up and running Win 7 for a brief time - didn't start at some point afterwards...
View 9 Replies
View Related
Mar 6, 2011
I recently built a computer, and tried to install Windows 7 OEM on it, but it gets stuck at the screen where it says starting windows and the logo appears. The logo gets smaller and larger. I've been told it might be something with the RAM, but tested it out and that's not the problem.
View 2 Replies
View Related
Nov 14, 2012
if i install graphic driver my led screen will get cracked and blue screens appears
View 3 Replies
View Related
Mar 13, 2011
I'm trying to get windows 7 ultimate on a new WD SATA hard drive. I get through the installation process which recognizes the drive and lets me install on it and seems to fully install. When it automatically restarts and the windows loading screen should appear, the computer just restarts itself and doesn't even let me get to windows.I've tried messing around with some of the BIOS settings, but I'm no expert in that and I seem to be running out of options.I've tried installing the x64 and x82- both give the same problem.One potential thing I'm seeing is that after the initial screen showing my computer specs on start up, I have a RAID screen which AFAIK shouldn't really matter too much since I'm just using one HD, but it does not detect any drives. Going into the RAID setup I can't change anything either because it needs to install something (which I can't - no floppy) or it won't let me for this configuration. My motherboard is a Foxconn 915G7AC/P7AC (unfortunately not the best when it comes to drivers and support stuff, hey - it was cheap and had good reviews when I bought it!)4 Gigs of RAM.My cd/dvd drive is SATA as well, in case that matters (from what I've read searching around other drives being SATA or IDE had some sort of effect)
View 10 Replies
View Related
Dec 18, 2011
My windows 7 professional 32bit on my laptop has a problem. Everytime I turn it on, my laptop screen is white (and fades in some hints of black) and nothing shows up. However, sometimes I am able to get a display on an external monitor.
Before my computer loads my desktop it does a startup repair. What ends up happening is that it does a system restore and my computer is able to boot up normally on my external monitor (laptop screen still white). Once everything loads, my computer automatically looks for and installs a VGA controller driver (at this point I am suspecting something may be wrong with my graphics card because I no longer have the windows aero theme).
Once the VGA drivers are installed, my computer says it has to restart so that changes can be made. After the restart, everything is back to normal with my laptop screen working again and now I have the aero theme again. What is the problem? I've been trying to fix this for weeks. It should be noted that I can't always get the display onto my external so I have to keep on force restarting (holding onto the power button) until I can get it on the external.
I installed a new driver for my graphics card and it hasn't fixed the problem. I know there is a virus on my computer (file is tdx.sys). I am going to replace that file with a new one following some instructions from another forum but I don't want to do that yet because I am currently writing exams and not much of a tech savvy person. I don't want to mess around with system files until at least after my exams so I can back up everything.
View 9 Replies
View Related
Dec 21, 2012
My game stalls when the screen goes white and an exclamation mark appears in the windows 7.
View 2 Replies
View Related
May 4, 2012
My computer boots up fine. All programs work fine. While I'm not using it (at least it hasn't happened while I'm using it) I hear it beep once and when I go to check the computer the screen wont show any picture, it's like the monitor is on but the PC is off.PC light is still on, hard drive still spinning and the fans are still on.I have to reset the PC and I get the "Windows was not properly shut down" message upon reboot.
View 5 Replies
View Related
Apr 19, 2012
Well I will get right to it. Its a desktop I built about 4 mths ago. I was goofing off all day, ran perfect. I got my package from Tiger.com, yay new memory. I also bought a drawing tablet that came w/ photoshop ele 8 and artrage. I promptly shut down my system, installed the new stick of matching memory, Corsair DDR3 4g 1600mhz, in slot two and four, with the old stick. I was only running one stick due to an order error. I reboot. The system recognizes it, runs fine. I install photoshop ele 8 and art rage along with an update to java. So far no problems. I turn the system off to plug in the drawing tablet per the instructions it came with. When it goes to reboot, i get to the windows loading screen, the animation just starts to load when i get a flash BSOD then the moniter shuts off to no signal and the computer just sits there fans and all running. I am using Win 7 home premium 64. I can get into BIOS. I have run the launch repair. I have tried putting the memory back to the previous configuration. I have run the memory diagnostic tool. I have tried system restore but no points to restore. I have tried to repair install with Windows disc, says disc is incompatible with current version, its the same disc i used to install windows the first time. I have tried to reinstall windows twice, still does it. I have attempted to make a repair disc, didnt work. If you can tell me how to get dump files from this state i would be happy to do so. If it helps at all i am using an SSD as my main hard disk, i have a second drive but there is nothing on it atm. I am just at a loss, i know a good bit about computers but not far enough, lol. My desktop is my baby and i really wanna get it up and running again.
View 2 Replies
View Related
Nov 2, 2012
My Laptop loads fine when started but as soon as I get the windows 4 Dots turning it is a Blank Screen.
View 1 Replies
View Related
Mar 29, 2012
My A200 has been upgraded to 4GB RAM, and Win7, worked fine for a while, then started randomly freezing with weird screen stuff (video not displaying properly). Power off only worked. Much frustration and removal of progs later, tried on safe mode - works fine. Safe mode with networking - works fine. Can plug it in (surefire way to get it to fault normally) and in safe mode it works fine, in normal mode, immediate fault.
Thought perhaps a horrible malware, did clean install from disc of win7, no change (except now, coz I deleted all the Toshiba drivers, the dvd drive is noisly lol). Can't load progs to run the damned thing properly because it won't run in normal mode, only safe mode. Tried formatting the hdd, but it won't let me (partitions) which I thought were reformatted during a clean install anyway?
Haven't tried changing the charger yet, because it works fine in safe mode, so I thought probably a software issue? Have tried minimal or "clean" normal boots, freezes immediately.
View 3 Replies
View Related
Dec 9, 2010
I am having trouble installing Windows 7 (currently using XP). I am booting off from the CD and it passes the "Loading Windows Files" (with the gray bar) and also passes the "Starting Windows" black screen with the logo. But after that, only the blue screen background pops up. The "Install Windows" screen for me to select languages does not pop up. After a minute, the disc just stops spinning. I am getting a sense that it would not load after countless times of restarting my computer to see if it does. I just bought the Windows 7 Home Premium from Amazon two days ago.
View 4 Replies
View Related
Nov 28, 2009
Quick question, I have jsut installed Windows 7 (and love it ) but there is a black strip down the left side of my monitor. it looks as if the screen has moved to the right about an inch leaving me unable to click the 'X' button on programs when maximised. I know there will be a stupidly easy solution but I'm stuck and not a computer wizz.
View 7 Replies
View Related
Sep 26, 2009
I am doing a clean install on a amd 64 bit 4500 with a ati 1gig graphics card, 250g harddrive and i think at least that is what i have. The problem that i am having is that after installing windows 7 it freezes on the initial start up window where it is asking the language to install time and currency format and keyboard.
It took a long time to get to this screen as at first it just hung on what looked like a windows 7 desktop background with no icons. It hung like this for about 10 minutes and now it is stuck on the first install screen. I cant input any information the keyboard is plugged in and I have tried it with a wireless mouse as well as a wired mouse.
View 1 Replies
View Related
Oct 27, 2009
I am currently using Vista Home Premium SP1, with a Nvidia GTX 295 and Intel Core i7 920. I purchased the Windows 7 Home Premium upgrade disc yesterday.
Near the end of the installation it does one of its usual auto-restarts. After the Windows 7 loading screen finishes, all i can see is a black screen with a mouse pointer, thats it. Then if i restart it takes me to a screen that says "your upgrade failed, restoring your previous version of Windows". I have tried every hint i can find, 9 installs later, and still no closer to finishing.
View 1 Replies
View Related
Oct 28, 2009
I am trying to do an upgrade with a computer I previously had Vista Ultimate on. I choose to do a clean install and formatted the hard drive with the 7 installer. The installation begins normally, but when it reboots and says "Starting Windows" a black screen comes up. I am able to see the mouse cursor and mode it, but nothing else occurs.
The hard drive light comes on periodically, but nothing happens even if I leave it sitting for several hours. If I restart the computer, it gives me the option to start in safe mode, then says 7 can not load in safe mode and reboots to the same black screen.
I have tried installing multiple times with the same result. I re-loaded Vista and tried to do an upgrade, but it tells me Vista Ultimate can not be upgraded to 7 Home Premium and I must do a clean install.
The upgrade advisor told me I should have no issues and Vista ran fine.
Any ideas what could be causing this black screen upon installation?
View 5 Replies
View Related
Jan 3, 2010
DVD disc boots up, Windows loading files...then Microsof Corporation loading screen comes up, and after that black screen, and nothing happens, everything is working but nothing happens. Tryed several times, but still the same thing happens. Any suggestions?
View 9 Replies
View Related
