BSOD After Windows Loading Screen?
Feb 27, 2012
I have a computer which gives me a blue screen when I turn it on. Sometimes this will happen 4 times in a row and others I can't even get the blue screen. I didn't record the error code down but I am trying to replicate the issue and when I get the screen I will update this post.
- x86 (32-bit) or x64 ? x86
- the original installed OS on the system? Windows 7 Enterprise
- an OEM or full retail version? OEM
- What is the age of system (hardware)? 3 years
- What is the age of OS installation (have you re-installed the OS?) 2 months
View 3 Replies
ADVERTISEMENT
Apr 19, 2012
Well I will get right to it. Its a desktop I built about 4 mths ago. I was goofing off all day, ran perfect. I got my package from Tiger.com, yay new memory. I also bought a drawing tablet that came w/ photoshop ele 8 and artrage. I promptly shut down my system, installed the new stick of matching memory, Corsair DDR3 4g 1600mhz, in slot two and four, with the old stick. I was only running one stick due to an order error. I reboot. The system recognizes it, runs fine. I install photoshop ele 8 and art rage along with an update to java. So far no problems. I turn the system off to plug in the drawing tablet per the instructions it came with. When it goes to reboot, i get to the windows loading screen, the animation just starts to load when i get a flash BSOD then the moniter shuts off to no signal and the computer just sits there fans and all running. I am using Win 7 home premium 64. I can get into BIOS. I have run the launch repair. I have tried putting the memory back to the previous configuration. I have run the memory diagnostic tool. I have tried system restore but no points to restore. I have tried to repair install with Windows disc, says disc is incompatible with current version, its the same disc i used to install windows the first time. I have tried to reinstall windows twice, still does it. I have attempted to make a repair disc, didnt work. If you can tell me how to get dump files from this state i would be happy to do so. If it helps at all i am using an SSD as my main hard disk, i have a second drive but there is nothing on it atm. I am just at a loss, i know a good bit about computers but not far enough, lol. My desktop is my baby and i really wanna get it up and running again.
View 2 Replies
View Related
Mar 24, 2012
Recently, my computer starts up windows and after the loading screen it just sits at a black screen forever with a cursor and it doesn't even make it to the log in screen. I have tried safe mode with the same results. What I've Done So FarTried to Repair Startup with Windows DVD Tried to use sfc /scannow at boot (Says pending changes and needs to restart) Tried logging into my Ubuntu partition and virus scanning (None found) Tried copying Reg Files from Regback into config while I was in Linux Tried to Repair Install (But I can't log into Windows ) Tried to bootrec /fixmbr /fixbot /RebuildBcd (Which destroyed my dual boot linux grub, but I was desperate. And still nothing) Interestingly though, after I do /RebuildBcd command it says something like "Found Windows Installations: 0" Tried to System Restore (Gave me an Error, wouldn't you know) At this point I'm not to confident that this can be fixed. If anyone has any ideas I'm willing to try. Or if you have any snazzy suggestions on how I could fix it using another computer, I have a different Windows Pro x64 computer that I can put the HD in if there's someway I can save my data/fix it/repair install from there. I just don't know how.
Edit: I finished the chkdsk and there were no bad sectors, though it did give me a message "Failed to transfer logged messages to the event log with status 50."I did a Windows Defender Offline scan with no viruses and I'm currently scanning with Kaspersky Rescue disk. I don't believe it is a virus, I think it's a corruptregistry at this point. I had just cleaned my registry with CCleaner before the shutdown that led to this >.<
View 9 Replies
View Related
Apr 15, 2012
i followed the same issues and solution shown here:[URL]..but the problem is, when i go to that folder using command prompt, i dont see any cachecat.cache file, only driver.rtl in codeintegrity.
View 1 Replies
View Related
May 9, 2011
While loading windows 7 64 bits ultimate i have several, if not many, crashes. Although loading my other system (XP SP3 32bit) don't have any crash by loading it (sometimes).i'm kinda tired of this problem, it annoys me and keeps me wasting time
View 9 Replies
View Related
Nov 19, 2011
When I get the login screen, I just see the buffer LED glowing for 1 minute. Then it calms down. Then after logging in, the buffer LED keeps glowing for 5 minutes and my computer is terribly slow. If I do nothing through all this operation and just wait, all will be okay. So usually I can use my laptop after 8 minutes from turning it on.On the other hand, if i directly start opening applications before the buffer LED turns off (sometime only firefox), I directly get the bsod. Each time I get a different code for it. Why is this happening? Please find below the laptop specs and things that I have tried. [code]
View 1 Replies
View Related
Nov 18, 2012
I did a clean windows 7 installation after formatting my Hard drive the installation went clean i noticed that after switching my computer it takes me directly to " starting windows " and then to " Login screen " but in my previous installation i use to get,As shown in the picture, the black screen showing microsoft corporation logo with green bar and i am not getting the same in my new installation what went wrong.
View 8 Replies
View Related
Jun 25, 2012
I have had an issue the past week with my computer both loading and shutting down and I also have an issue with hiccups during gaming...
I have downloaded Malwarebytes and Superantispyware to see if I have also attempted to update all my drivers via windows 7 option
computer specs:
Intel Core 2 Quad Q6600 not overclocked
2x 2GB Mushkin Enhanced Redline DDR2 Ram
2x 2GB corsair DDR2 Ram
EVGA Superclocked GeForece GTX 560 Ti
EVGA Nvidia nForce 750i SLI
Antec High Current Gamer 900w PSU
Western Digital Raptor 160GB 10000RPM (Dont remember exact one)
Windows 7 64-bit Home Premium
View 1 Replies
View Related
Sep 29, 2011
windows freezes at the logo screen when it starts growing. just got on after 4 days of working on it. tried booting with disc but came to a black screen with a white under-score then message came up saying the BOOTMGR is invalid? Is there some sort of CMD command I could use to fix this? or another way of booting? I tried doing windows repair numerous times, went into bios and reset everything to default making sure everything in use that was needed was on, did memory check, tried reinstalling from win 7 32 bit disc but didnt have any drivers that i could find on the browse tab
View 1 Replies
View Related
Oct 17, 2009
I just wanted to throw this out there. The animation when windows is loading is the best loading screen for any OS I've seen. Anyone else have any thoughts on that part of the boot process?
View 2 Replies
View Related
Apr 19, 2011
I rebooted my PC after installing the latest version of iTunes, and upon reboot I couldn't get past the motherboard splash screen. I tried removing each stick of RAM individually, I tried removing the battery, but finally it was clearing the CMOS which helped me at least get past the mobo splash screen (after pulling out all of the USB devices plugged in otherwise it would also freeze), but now it gets stuck on the Windows 7 loading screen.
I tried entering the Windows 7 repair function, but it freezes on a black screen (I waited about 20 minutes).
I tried booting into safe mode, but it gets stuck while loading this file: AVGIDSEH.sys
Now since I can't even boot into windows to try to do any kind of diagnosis, I figured I would create a USB drive portable version of Windows 7.
My question is, if I manage to boot into my portable Windows, what kind of tests should I run?
Finally one last question, typically when Windows 7 gets stuck at loading is it hardware related or would a complete re-install fix the issue? At this point I just need to get it back and running I don't care about losing my settings and programs.
View 4 Replies
View Related
Jul 5, 2011
logo screen when it starts growing. just got on after 4 days of working on it.tried booting with disc but came to a black screen with a white under-score then message came up saying the BOOTMGR is invalid? Is there some sort of CMD command I could use to fix this? or another way of booting? I tried doing windows repair numerous times, went into bios and reset everything to default making sure everything in use that was needed was on, did memory check, tried reinstalling from win 7 32 bit disc but didnt have any drivers that i could find on the browse tab.
View 2 Replies
View Related
May 13, 2012
Yesterday I woke up to my computer sitting at the starting windows loading screen. I have no idea why it turned off but now every time i try to start it, It sits at the loading screen. I already tried system restore and start up repair. Did it a bunch of different times and the restore worked yet still had the same problem repair did not work. I can get into safe mode, so i tried to do the msconfig way. I did selective start up and disabled all the non Microsoft services. Restarted and It still sat on loading screen. I then opened the desktop up and tried cleaning it making sure all hardware was properly seated. Still no success.
View 5 Replies
View Related
Aug 31, 2012
I don't know much about computers, so when I tried installing iTunes, and the computer completely froze, I shut it off manually, and upon restart, accidentally set all of the BIOS settings for my motherboard to defaults, now when trying to boot my computer, it gets stuck at the loading windows screen, I already tried reinstalling Windows 7..
Computer:
Intel Processor Sandy Bride-E Intel Core i7-3820 3.6GHz (Quad Core)
Intel Motherboard 2011 [x-fire,SLI] ASUS P9X79 [SATA III, USB 3.0]
Quad - Channel Memory 16GB (4x4GB) DDR3 1333MHz
Primary Hard Drive 1TB 7200 RPM
Graphics Card AMD Radeon 7950 3GB (Min. 650 Watt Power Supply)
Power Supply Standard 800 Watt
Operating System Windows 7 Home Premium 64 Bit
View 1 Replies
View Related
Feb 20, 2013
I already uninstalled the Intel 4000 Graphics drivers and I updated my Nvidia GTX 690 to the most current drivers.
Specs:
Motherboard: ASRock Z77E-ITX
CPU: Intel Core i7 3770k @ 4.2Ghz
CPU Cooler: Corsair H80i Push/Pull
RAM: Patriot Intel Extreme Masters 16GB @ 1600Mhz
GPU: nVIDIA GeForce GTX 690
SSD: 2 x Samsung 840 Pro 256GB
HDD: 2 x Seagate Barracuda 2TB
PSU: Seasonic X-Series 850
View 2 Replies
View Related
Mar 13, 2011
I'm trying to get windows 7 ultimate on a new WD SATA hard drive. I get through the installation process which recognizes the drive and lets me install on it and seems to fully install. When it automatically restarts and the windows loading screen should appear, the computer just restarts itself and doesn't even let me get to windows.I've tried messing around with some of the BIOS settings, but I'm no expert in that and I seem to be running out of options.I've tried installing the x64 and x82- both give the same problem.One potential thing I'm seeing is that after the initial screen showing my computer specs on start up, I have a RAID screen which AFAIK shouldn't really matter too much since I'm just using one HD, but it does not detect any drives. Going into the RAID setup I can't change anything either because it needs to install something (which I can't - no floppy) or it won't let me for this configuration. My motherboard is a Foxconn 915G7AC/P7AC (unfortunately not the best when it comes to drivers and support stuff, hey - it was cheap and had good reviews when I bought it!)4 Gigs of RAM.My cd/dvd drive is SATA as well, in case that matters (from what I've read searching around other drives being SATA or IDE had some sort of effect)
View 10 Replies
View Related
Feb 25, 2012
Very strange problem happened after I reinstalled Windows 7. My computer boots and runs fine, no issues. Whenever I turn it on from cold or restart, the screen is off up until Windows starts loading. If I keep pressing DEL during boot, the BIOS comes up on the screen. Exit the BIOS and same, nothing on the screen until windows is loading. I have one PCI-E graphics card going to one monitor, and I tried changing in the BIOS PEG and PCI for the graphics card but with no luck
View 8 Replies
View Related
Sep 16, 2009
My problem is that windows 7 wont get past the loading screen when its loading the OS. I have noticed that it will work when i have only 2GB(one stick) in but when i try to put all 8GB(4 sticks) in, it wont work. This same thing happened when i was trying to install windows 7 from a fresh install.
View 9 Replies
View Related
Oct 23, 2009
i created a partition and formatted it of 70gb to install windows 7 in it. Im obviously using the clean install method, everything goes fine. It expands the files, it installs them,copies them, etc. When my system is booting up, it shows me the screen of windows below saying "windows is starting up", the problem is that windows never starts up, i left it for a night, and it didnt start up, it just stayed there. Im trying to install windows 7 64bit, any help would be greatly appreciated.
View 9 Replies
View Related
Jul 2, 2011
MSI GX640
2x2gb ram
Intel Core i430M
ATI Radeon 5850
Seagate 500 GB
When I try to boot it gets stuck at the windows 7 loading screen with the Windows logo blinking like usual loading. Tried leaving it on for 30 minutes, nothing happened. Safe mode gets to the loading windows files part and freezes there.First I attempted to use the System Recovery CD it kept on till the loading screen then freezed just like the OS boot. Same thing with installation disk.I don't know how they work, if one or them are the primary stick or whatever. I tried swapping them, still same problem.Hard disk works just fine connected to my other computer as slave.
Got some of the boot cd programs to work --
Mem86
Windows Memory Diagnostics
HDDUM SMART viewer
Seagate SeaTools
All passed.
So nothing is wrong with my RAM or hard drive?Today, Saturday, I transferred the stuff worth keeping on this disk, and reformatted it. Still same problem when I boot the installation CD!
View 2 Replies
View Related
Apr 2, 2012
My Windows 7 - 64 bit takes about 12-15 seconds loading in the login screen before it loads the desktop. I only have three startup programs running, Avast 7, Realtek Audio, and Catalyst. I don't have a password and only have one account (admin). I know that 12-15 seconds is not so much of an issue but I think that the normal waiting time is only less than 5 seconds and I think 12-15 seconds is not right because I am running Windows 7 on a Core i7 950 3Ghz and 7200rpm Hard disk. I already defragged my hard disk using Auslogic Disk Defrag and scanned my computer for virus.
View 4 Replies
View Related
Jul 21, 2012
I've run into a problem that's preventing Windows 7 from loading normally. The problem starting happening yesterday, when my computer froze up while I was surfing AGV antivirusver since then, I cannot make it past the "Starting Windows" screen. Afterwards, instead of going to the "Loading" screen, my screen goes to blank.Since I could still bring up safe mode, I've tried the following things, with either no success, or Windows can't detect anything wrong:1. Performed a System Restore to a day earlier.2. Startup Repair didn't detect anything wrong.
View 2 Replies
View Related
Jan 16, 2011
I'm using windows 7 home prem 64bit. This problem just happened today. I sign on with my password and the system says welcome, but won't actually login. It just hangs there. I used Avast to do a complete scan, but it didn't come up with anything. I used MS security essential it found a bunch of Java exploits and trojan downloader and I deleted them. But the problem is still there.
View 7 Replies
View Related
Oct 16, 2011
my computer started freezing on on the windows loading screen, so i had to turn my computer off again, wait a few seconds and start it agin, it then worked on the second time. i couldnt get into any kind of safemode.when i got into windows i had loads of generic win32 errors, i couldnt acess the internet or any anti spy/virus programs. i shut it down and it hangs so i have to manually swith it off.i was on xp so i thought i would format my computer and install windows 7. This has helped with all the win32 errors but my computer still freezes on start up at the windows loading screen and still requires me to swith it off and restart it, this works most of the time. might have to do this 2 or 3 times.i have looked in the events viewer and it says i have 3 errors: error 6 kernel process power / restart manager.
View 3 Replies
View Related
Oct 27, 2012
I was browsing the web and my laptop froze. I held the powe button to turn it off and now when i turn it on, it only goes to the windows logo and no farther. If i leave it alone, after 20 minutes it goes to a black screen with a cursor. I have tried starting in safemode as well and it only loads some of the files before freezing. I have also tried startup repair. After a few minutes it gives a few options such as system restore. I tried a restore and it still doesn't load.
View 1 Replies
View Related
Nov 19, 2012
I just built this computer a couple of months ago, yesterday I turned on my computer in the morning, and it ran fine, did my usual morning website raid on soccer etc, turned it off went out to do some errands, came back and turned it on and it kept hanging on the "Windows Loading" screen, read around about a couple of things it could be, i think I narrowed it down to my secondard hard drive (WD 500G Caviar Blue) which i use for storage and downloads, all my games and OS are installed on my solid state.
So whenever my secondary hard drive is plugged in, my comp hangs on "Windows Loading". If i unplug it, it loads up windows quick and easy like always. I turned on hot swap, and if i plugged in my HDD after my computer was already loading into windows, it would be fine than once it recognized it, it would start crashing my windows explorer etc constantly. I tried switching SATA ports, now it goes into windows with the hard drive plugged into another SATA port, the HDD is recoginzed in Disk Management, and is also recognized in device manager, but I cant access it.
These are my specs.
Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz
ASUSTeK COMPUTER INC. P8Z77-V LK
OCZ-VERTEX4 128GIG SSD
WDC WD5000AAKX-004EA0 500GIG HDD
NVIDIA GeForce GTX 670
4x4Gig G Skill Rip Jaws 2133
Microsoft Windows 7 Ultimate 64-bit 7600 Multiprocessor Free
View 4 Replies
View Related
Sep 9, 2010
I'm reinstalling windows 7 ultimate. I try and boot from DVD and it loads files the the screen goes blank.
View 9 Replies
View Related
Jan 31, 2012
I just finished building my first computer in 8-9 years or so. I was quite excited that my computer booted first time I turned it on but my excitement was soon overwhelmed with defeat. Let me start by linking my computers specs. [URL] I downloaded windows 7 from my schools msdn website I have the key and everything. I then burned it to a dvd. After booting from my dvd drive the loading bar continues and finishes. The 4 colorful balls float around then come together and my computer gets stuck.
Now It's very important to note that I was able to get past this screen after restarting my computer 4 times and I was successfully able to load continue on to installing windows only to get stuck in the same screen while booting from my ssd. Then I thought this issue could've been caused by using my SSD. So I unplugged it and repeated the same process using my seagate HD same thing happened. When I try starting it in safe mode the computer continues on to loading windows but I get prompted to restart it in normal mode so that the installation can continue.
View 5 Replies
View Related
Apr 29, 2012
I've run into a problem that's preventing Windows 7 from loading normally. I'm still able to bring up windows in safe mode perfectly fine. The problem starting happening yesterday, when my computer froze up while I was surfing GameFAQs, forcing me to perform a hard reset. Ever since then, I cannot make it past the "Starting Windows" screen. Afterwards, instead of going to the "Loading" screen, my screen goes to blank, with a message that it cannot detect an input and my pc just hangs there.Since I could still bring up safe mode, I've tried the following things, with either no success, or Windows can't detect anything wrong:
1. Performed a System Restore to a day earlier.
2. Startup Repair didn't detect anything wrong.
3. WIndows Memory Diagnostic didn't detect anything wrong.
4. Performed an Error Check on my hard drive with the built-in Windows tool with auto-repair on.
5. I rolled back my video card drivers (Nvidia GTX 460) to a previous version.
View 6 Replies
View Related
May 26, 2012
I'm not sure steam had anything to do with the crash the computer was idle and not really being stressed. The computer and its parts are all relatively new, some parts up to a year old. All drivers are up to date, as far as im aware. I think the bsod code was something lik 0x000000124. Any idea what caused it ? Driver or hardware related?
View 2 Replies
View Related
May 25, 2011
i am having problems with my windows 7 devices and printers screen. I have tried all solutions like stopping the blue tooth support service, uninstalling printer drivers, registry fix for IE 8, stopping printer spooler service and changing display icons all to no avail. I have no idea when the problem started but ive been experiencing this for three months now. i think i dont want to reinstall my OS if it ii am using windows 7 ultimate 64 bit on 4gb ram and intel core i5 processor. also using ie9 as my browser.
View 3 Replies
View Related
