I have a dual boot system with WinXP and Windows 7 on the same drive, partitioned out. I also have a second drive which contains most of my data files.
For some reason, Windows 7 isn't seeing my XP partition, however it has no problems seeing my data drive. XP can also successfully see the new Windows 7 partition when I boot into XP.
Is there a reason why Windows 7 can't see my XP partition? Is there a way to fix this? Doing a search on this was quite hard. I kept getting all sorts of irrelevant results (most about full missing hds which isn't my problem).
I have windows 7 and have 2 internal hard drives, the main hard drive is C, the second hard drive for storage was partioned into 2 drives, letters D and G, drive G is not visible anymore and when i go to disk management on drive D is visible how do i get drive G back as i had data on that drive
In my Sister's laptop, running Windows 7 Ultimate x86, all of a sudden, while she was working on the computer, the "E drive" went missing which was a partition on the hard disk (I don't remember if it was a logical or primary partition). She tried restarting the system but to no avail. So, I told her to open the "Disk management" tool in Windows 7 to see if the partition is visible in there. I did this because sometimes, in my computer, my expansion drive wouldn't show but it would be visible in the disk management tool and all I had to do was to re-assign it a drive letter. But, in this case, it wasn't visible over there.
So, now I told her to download "Mini-Tool Partition manager Home edition" and install it on her laptop. On running it, it wouldn't show the partition either. It would just show "C:", "D", "System Reserved" and unallocated space. However, when I added up the size displayed by C:, D:, System Reserved and Unallocated, it doesn't add up to the actual hard disk size. It means the partition is somewhere there but not visible. Is it possible that the partition would show up correctly if the laptop is booted into the bootable image of Mini-Tool Partition Manager?
I'm using Compaq Presario CQ40-627TUMy Laptop SpecIntel Dual Core Processor T4400 (2.2GHz, 80Mhz FSB,1 MB L2 Cache)- 2048MB 800MHz DDR2 Memory- 320GB 7200rpm Hard Disk Drive- 14.1' TFT WXGA High-Definition widescreen LCD panel with brightviewtechnologynd i'm using windows 7 Ultimate on boot system partition C, dual boot with linux mint. which mean i got four partition. one for linux mint. one for its swap space. one for windows 7. one for my data storage(movies,drivers,mp3,picture and etc).last few days i try to resize my C partition (120gb) to make it smaller to gain some unallocated spaces and resize the D partition because my D (almost 100gb) (ntfs/primary/data storage) almost full. i use easeus partition master v5.01.
After done resizing and restart i can't see any D partition. so i was worried that my data will disappeared. i try to look for it but there is no Drive D even on the easeus or diskpart. the only drive appears was C Drive.i remove my Linux Mint and its swap (60gb) and thinking that i could get some more free space and do some cmd prompt windows 7 repair fixmbr thing to remove the grub. then i use partition recovery to transfer those missing data from partition D to C Drive. (appears as unformatted)i try to use partition wizard home to resize it back to 300gb. and it works. but i cant make a partition. it will disappear just like that.i also try to use diskpart,command prompt diskpard, and paragon. but also not working. the C drive was shrink but theres no unallocated space and no D drive (the new create partition). i try logical partition,primary,ntfs and fat but also not working. even the unallocated space also gone. i use almost 4 3rd party partitioning software but still got no luck with it.example:i divide 300gb into 2 partition which exist the C partition 150Gb but the other one gone. i wish theres other way than format. i also done many time. doing check disk, partition table doctor, searching for bad sector. but no errors with my hdd.
I created a 20gb partition on my external hard drive and no longer require the partition. It is currently unallocated space so I want to format it into NFTS. Using computer management the partition was selected and and I went through the steps to format but i keep on getting an error message saying there is not enough space on the disk to complete this operation.
Today I reinstall system from XP to WIN 7. All was ok, but one of my partition is missing.Screen from disk managment.141gb of free space, that is all my missing partition! How I restore it?
partition table since I cant install ubuntu. I used testdisk to fix it and now I lost my partition D. However, I can still see it in testdisk. How can I restore my lost partition? I didn't backup my partition list before I try testdisk Please check the 2 screenshots of my current system state.
The [Local Disk] shown below is the one I need to restore.
1.I start installing a fresh copy of Win 7.2.At the point of installation which concerns partitions I delete my 2 old ones (had 2 partitions on 1 HDD) and create 2 new ones.3.I continue installation on the smaller partition (just for the OS purpose) 4.All done perfectly with installation.5.When I go to My Computer I am only showing drive C: (the smaller OS partition) and I don't see the second partition at all.
i cannot boot my Windows 7 64 bit Dell Studio 1558.Cannot boot to Windows.Error(s)BOOTMGR IS MISSING , CTRL + ALT + DEL TO RESTART. Description:
1. Initally had two partitions .. C and D .. 2. Tried to merge C and D to make C more by using Partiton Wizard. 3. Computer Restarted. 4.BSOD at Starting windows logo 5. Stuck at boot. 6. Launched Windows repair. 7. Unable to do repairs. 8. Dell restore unable to locate present installation. ( "current installation : (Unknown) at Unknown drive) 9. Checked partitions using DISKPART at command prompt. 10. Tried to change active partition . Restarted. 11. BOOTMGR MISSING ERROR. Dont even go to startup repair. 12. DVD DRIVE of LAPTOP NOT WORKING so made Windows Startup repair USB bootable. 13. Now have Access to Recovery Menu. 14. Made Partition Wizard Bootable USB . Now have access to Partition Wizard Also. 15. Tried installing Windows 7 using USB. Got error "installation error. verify windows sources are accessible Windows 7 Instalation Problem - Error Code 0xC0000005. 16. Stuck at boot now.
I checked OS drive in partition wizard bootable , it is intact..Windows installation is there....Every drive is ok but somehow booting not from that drive.I will attach photographs of Partition Wizard Partiton status.
my Acer Aspire 5738G to factory settings. (I've done it before and i never seemed to have a problem). I know it should be simple to do this, by simply pressing "Alt" and "F10" at the Acer Splashpage when you bootup, and going to the acer eRecovery page. But when i do this i get the error message."HDD RECOVERY VALIDATION FAILED" I've tried my hardest, searched all over google for a solution, but every problem seems to be different.And i can't figure out what is particularly wrong with my computer. I am only an amateur when it comes to computers, and disks, partitions, locating partitions, etc etc is not my strong suit. Is there anyway i can check if the hidden partition "PQservice" is still in my drives? If it helps in anyway, i though i might mention that the previous time i restored back to factory settings.When i completed it, i didn't fully complete the windows installation process, and now whenever i log into my computer, it mentions that my "windows is not yet genuine, click here to register it blah blah blah". I didn't bother doing it because i assumed it wasn't vital, i was and have still been able to use my computer fine for the past year or so without having to do it.
I am using dual booted laptop Windows 7 and Linux. I opened my Disk management and I right clicked the Linux partition drive and I selected "Delete Volume", After that i formated that partition. Now when I restarted my laptop, i got error like this:
Then I created a live USB contains SGD iso file. I booted this USB on booting time and selected Windows boot. It asked in the black screen with options "Start windows normally " and " Launch and Start up Repair and " I selected the second option and I tried to restore my back up files, then I can see that C drive contains only the files and folders which I was stored in D drive. and D drive shows only 200 MB size. I dont have CD drive in my laptop. Before this problem:
C drive is -58GB D drive is -141GB
Now C drive shows 141GB and contains the files which were in my D drive.
ASUS M5A97 (AM3+) Mobo AMD Phenom II X4 945 2 x 4GB G-Skill Ripjaw DDR3 RAM PNY Nvidia GeForce 460 GTX 1GB A 1TB SATA HDD (can't remember the brand) A 160GB SATA HDD
My issue is, I'll try to boot into Windows 7 Ultimate x64, not a new installation at all, and I get the "Windows is Starting" screen and the little colored balls, but after a few seconds I get a very very quick blue screen and reboot before Windows even loads. There's no way I can read the blue screen error.So I thought, "Let's just do a startup repair." That didn't work; it said: Quote: Root cause found:The partition table does not have a valid System Partition
Repair action: Partition table repair Result: Completed successfully. Error code = 0x0 Time taken = 20632ms
So I pop in the Windows 7 installation DVD; it tells me there are missing CD/DVD drivers. I point it to the Windows 7 drivers directory on my primary HDD, it still can't find anything.So I load up my copy of MSDaRT. Some tools load, but it tells me "Tool requires a supported offline OS" under many of the tools, and the ones that do start won't do anything at all because they can't "see" my Windows 7 installation. I have an external HDD reader, but I'd rather not have to wipe everything and do a clean reinstall. Maybe trying to fix the partitions with a G-Parted on an Ubuntu Live CD or something?
Upon inserting the windows installation disk into the drive, the basic windows procedures took place. It then asked where we wanted to intall the windows operating system. We decided we wanted to partition his one and only hard drive (a 1TB Seagate at 7200rpm or so). We chose a 100GB partition to be the primary drive where the operating system would be installed. Windows also created a 104mb drive for system files or some nonsense. That left a 900 GB partition that would NOT have windows 7 installed on it. Everything installed, PC booted up and when we open windows explorer, the 900 GB drive does not appear. Maybe it has not been formatted?
I created a new partition, and accidentally made it my primary partition (C: being my primary one and D: being by other one) now whenever I boot up I get NTLDR missing ctrl+alt+del to restart. So I downloaded the windows 7 repair files from one website and tried to fix it, but I failed and now I wanted to know is there any other way I can fix using command prompt or will I just have to reinstall windows 7.
I have a Windows 7 Professional system that I went to take an image of using EASEUS TODO Workstation. When I went to do the backup, I noticed that there was no 100 MB System Reserved Partition. I made the image anyway.When I tested the image on a new machine, it prompted me to repair or start windows normally. Unable to start normally, so I did the repair. After about 10 min, the system came back and said it cannot repair.Outside of start a system from scratch, is there a way I can get the system reserved partition out of the Windows 7 partition?
I have a 1TB hard drive partitions into a C drive and D drive. The operating system is Windows 7 64 bit. The C drive is my every day stuff, and I use D to store media, music, video etc. Today I wanted to access the D drive and it was not there. The C drive is listed as usual. I went to Disk Management and the missing D drive was not there as well. I don't know if this explains things, but I ran a partition analysis program and it showed 500 gigs as unallocated. But that space is also not noted in disk management. Right now I am running partition recovery software to see if the files are somewhere, but it will take a few hours.
Yesterday evening I was having computer problems so I decided to do a clean reinstall of WIndows 7. I cleaned out some partitions and then tried to put WIndows 7 on the fresh partition. The process began and then I got a mesage saying that Windows cold not format a partition on disk 0. This error occured while preparing the partition selected for installtin. Error code 0x80070057I also get a message when I restart the computer saying ¨Missing Operaing system¨ I´m guessing that that means I cant log in to fix this problem
I installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive. I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked. Can someone explain how to do this, please? I'm not completely computer illiterate, but I'm not familiar with partitioning disks. It was just the one time with Ubuntu.
I installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive.
I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked.
I have a generic System 7 64 bit system with a 1 TB SATA drive. It has one hard drive which I have partitioned into 4 partitions, with C: being where I put all the system software. The board has mulitple SATA ports.Change considered: cloning the C: partition onto a new SSD so that I can get the performance boost of an SSD. There are some heat problems with existing hard drive so I probably need to change it out, so I would also like to clone the D:, E:, and F: partitions to a new hard drive.I have cloned a single physical drive to another physical drive, and the software (Ghost, or the like) usually handles it ok, so that all I need to do is adjust some partition sizes, and then disconnect the old hard drive and everyting is good. This includes cloning a single hard drive with multiple partitions to being cloned to a new single hard drive with identical numbers of partitions.Compared to my prior experience, is there something different about cloning one partition only vs cloning the whole drive. My proposed plan is:
1) Install SSD 2) clone C: to SSD only 3) clone D: E: F: of old drive to new drive. 4) remove old drive.
I am Ranko, from Europe ( Serbia, but in the eyes of world not so desired country so I do not mention it... but great food , great parties and the most beautiful girls should compensate )Ok. What I did. During Win 7 installation on my new Lenovo G780 ( 500gb HDD ) , I have deleted system ( 0 ) partition firstWin 7 offered/created 30gb system, 30gb primary, 440gb primary 2 ( unallocated ) and one Lenovo OEM partition 1mb.As my friend said , always first go from behind but I didint. Now I am missing 30gb of space, and can not retrieve it. So if I do installation from the beginning i just have 470 GB of space to alocate to partitions ( for example 100mb system , 100gb Primary & 369gb Primary 2 )So 30GB seems lost. I have installed win 7 and run diskmgmt.msc and only 1 disk with 470gb is shown.I tried linux with that partition software and the same... it shows just 470gb of space...30GB are missing/lost/not existing.Once again... so sorry guys for posting this issue since maybe it is something that is common, but I really do not want to give up. It is not up to 30GB , it is about the principle , I have to retrieve it!
I recently purchased a new motherboard. After reinstalling windows, I noticed that my primary partition is also on my Storage Drive. Is there a way to change it back to only the SSD?
I just started having an issue on a clean install of Windows 7 SP1 build 7601.The icons for the W & Z partitions is suddenly showing as a broken link.I have tried right clicking on each partition > properties > customize > restore default folder picture and there is no change for either to update the icon.
Bought a Dell laptop a year or so ago. It has one Hard Drive broken into C and D partitions. C is a lot smaller than D and is almost filled up, with next to nothing on D. My Documents is on C and is probably accounting for a lot of the used space. I need more space on C to install more programs.
I have a clone image of my 500 GB (nominal) laptop drive backed up to 750 GB USB external and would like to allocate the remaining space on the 750 as a separate extended partition. Is that possible using W7 disk management? I have looked, but cannot see a way to do what I want on this NTFS-formatted basic drive. This is the layout of the two drives:
I just purchased a new computer with windows 7 installed. So far all I have done is hooked it up and turned it on and it did it's thing for the first time. Before I go any further, I would like to partition the 1tb hard drive into several drives. I have no idea how to do this.Everyone I have contacted, is a charge support. I can't go that way
I read about dual boot win xp (first ) and win 7. It says: win 7 does not see the win xp partition/drive and change made in win 7 ALMOST makes no change in win xp.So change in win 7 in this case does make change in win xp. What is it ?
