My laptop keyboard has stooped working in Windows 7 (normal and safe mode). However, I can use it to get into and navigate around the bios, and also do hardware checks like the memory check etc.
View 10 Replies
I have the most strange issue with my keyboard. It works in Bios, it works in safe mode, it works when I try to repair windows (repair files are added to a partition on the laptop - its how I bought it) but whenever windows boots normally, the keyboard won't work.It is a built in keyboard to my laptop and the fact it works everywhere else tells me it's fine (just in case connectors were damaged I stripped it and had a look anyway).Things I have tried
1) uninstalling the driver in safe mode - this reinstalls when I reboot but still no joy. The strange part is I do not think the driver files are corrupted because safe mode and normal mode seems to use the same drivers (standard ps2).
2) The manufacturer (HP Compaq) has no specific drivers which leads me to believe that standard ps2 is right but I reinstalled quick buttons -no joy
3) there are no conflicts or yellow exclamation point in device manager
4) the only thing I did was upgrade my AV (AVG 2013) so uninstalled -no joy.
5) ran AV and MBAM and ran TDSS killer just in case - no virus or malware
6) cleaned registry with Ccleaner -no joy
7) no processes or startup items are unusual but I have killed /disabled just in case-no joy
8) did a system restore (no joy)
9) I had backed up the registry ages ago so I tried that -no joy
10) Tried on battery and plugged in no battery in case the power is an issue -no joy
11) reflashed Bios - no joy
12 - All language sttings looked ok
A USB keyboard works if plugged in Just in case I did run hijack this too
The laptop I'm working on (And HP G series; running Windows 7 64bit Home Premium) had a NASTY trojan that disabled the keyboard and mouse (is what I'm assuming). I was able to work on the laptop with a USB mouse and the onscreen keyboardAfter going through about 10 AV software I finally got rid of all the Trojans (the scans on various AV software ran clean multiple times after removal); but the keyboard and trackpad continue to be disabled.Under the Device Manager it lists as the device as a "code 10" error.Doing some Googling I found a post that said do delete the registry entries that were labeled "UpperFilters" and "LowerFilters"; which I did and I rebooted.Now my USB mouse OR my USB keyboard won't work.I tried using a Linux Live CD and the trackpad and keyboard DOES work there no problem. Also the keyboard works fine when I'm in the BIOS.It's only when I'm in Windows (even in Safe Mode) that the keyboard/trackpad/USB Mouse/USB Keyboard doesn't work...so it's not a hardware problem.Things I've tried (besides deleting those registry entries)- Startup Repair- sfc /scannow- Reinstall the drivers (when I DID have access to Keyboard and Mouse)So to recap; I cannot use the keyboard/trackpad (or a USB Mouse and USB Keyboard) in Windows (including safe mode); but they DO work when not using Windows.
View 6 Replies View RelatedI have a windows 7 hp laptop model dv6000 and I want to check all my hardware components through the BIOS. I know that the key is f2, but whats the best time to hit this key..........
View 5 Replies View RelatedI custom built a PC today using an MSI motherboard. I started it up and checked the bios settings but changed nothing as the default settings were fine. I can use the mouse on the msi bios. I then exited bios and installed the OS windows 7. During the install I was unable to use my logitech optical usb mouse however the keyboard was fine.Windows installed successfully but the mouse still wont work.
View 1 Replies View Relatedtrying to recover from a system crash here.. One of the issues was me not being able to install/uninstall microsoft antivirus, since it seems some files were deleted which it needed. I tracked that issue to yet another issue what windows installer could not start, which suggested me to check if it was enables in Msservice.exe, which I couldn't start either.After some googling, I found a fix on MS website, which moved some dll around and asked me to reboot PC. After doing so, it stopped recognizing my keyboard and mouse (both usb) at the login screen, they are completely dead even thou they work on boot and in bios (and are detected in bios).I tried to restoring to the point before the "fix", but same issue.
View 8 Replies View Relatedwhy doesn't mouse or keyboard works at startup
View 4 Replies View Relatedmy keyboard doesn't want to type,only numeric number 8,4,6,2 works
View 1 Replies View Relatedi can enter bios with F1 key but after that i cant change anything(still in bios).It like keyboard not responding and i have to turn off pc to get out from bios..
View 5 Replies View RelatedI recently restored my system using a system image and I'm having an odd issue in the BIOS..If I enter BIOS and try to make a selection with the arrow keys--say I press the down arrow---The cursor just keeps highlighting the next item and loops around--to stop it from looping I have to hit another key say the right arrow key and try to end up at the selection I want..I was able to reset the BIOS to optimal settings to no avail..I have a Gateway DX4831 running windows 7 64bit.
View 9 Replies View Relatedmu usb keybord not working in bios and cm-dos
View 3 Replies View RelatedI've been having trouble with my new motherboard BioStar TZ68K+ . Whenever I access the BIOS, the selection keeps moving up as if the "up arrow" key on the keyboard was stuck. My keyboard is connected via purple PS2 in the back. I tried with a different keyboard, this time a USB connection, and still the same result. It seems to be happening only in the BIOS as it doesn't do any strange behaviour when I'm in Windows. I updated the BIOS to the latest version and cleared the CMOS using the jumper on the board.
View 3 Replies View RelatedMy wife's laptop broke down a few months ago, and we wanted to get some files off of the hard drive. I grabbed an extra eSATA cable and connected it to an extra port on my desktop motherboard... without remembering to connect it to the power supply. Anyway, when I booted up the machine, I was unable to get past the BIOS, getting an error message "Keyboard Error or No Keyboard Present". Even after shutting down and removing the hard drive, I'm still getting this error message. We've tried a number of different keyboards and it's coming up the same every time.
View 7 Replies View RelatedMy Acer Aspire 5820tz laptop will not work. The keyboard does not respond. The laptop sometimes goes to the Boot Manager when turned on, the boot manager flickers and is uncontrollable. Other times it gives off a loud violent beep sound. Once it went to login but the keyboard would not work so i could not login.
View 2 Replies View Related(1) I installed a new 1TB Seagate Baraccuda 7200.12 Installation seems fine.SeaTools (ver 1.2.0.2 and ver 1.2.04) won't detect the internal drive but detects external usb drives ok.
(2) My two Seagate 500GB, 1TB externals record disk temps over 45�C & climbing after a couple of hours running idle with an ambient temp of 22�C. This seems way too high - what do you think? I have a couple of days left to return the 1TB.
Whenever I'm checking for any updates (vaio care or ATI) a pop up window appears "Internet explorer has stopped working". And error reporting fails. The process linked with it is werFault.exe. I don't know what to do.
View 1 Replies View RelatedEvery time I start my computer I get this message;Checking file system on C: The type of the file system is NTFS. One of your disk needs to be checked for consistency. You can cancel the disk check, but it is strongly recommended that you continue. To skip disk checking, press any key within(10)seconds.I have allowed it to continue numerous times, but it makes no difference, this same error comes up every time I start my computer, now I just press a key within 10 seconds and that gets rid of it.
View 10 Replies View RelatedI have a Toshiba laptop A500 series running Windows 7 Home premium 64 bit. the computer was purchased in May. I am using MSE and Panda as my anti Virus--and Malwarebytes also. I scanned with all of them yesterday and they say my computer is free form anything malicious. However 2 times this week including this morning at startup the computer is checking C. I am worried that something is wrong.
View 2 Replies View Relatedmy laptop is just at a black screen after the dell screen.
I clicked the error checking for the "C Drive" and "At Startup" and when i restarted it just went to a black screen after the dell screen.
I have restarted several times trying to get Windows 7 to startup with no avail. What should i do?
Its a dell latitude laptop with like 2gb of ram intel core 2 duo proc (not sure on speed)
Checking for recall for hp pavilion dv7
View 2 Replies View RelatedI want to run chkdsk /r to check hard drive C but there are 2 hard drives D being the second one, which is intended for backing up. How do I know which hard drive I am check since there are 2.It was suggested to run chdsk /r from Tools but I cannot find it. Can anyone tell me where it is and how to use it?
View 14 Replies View RelatedMy system had been very slow and hanging for a while now, so i decided to to check for errors in my drive C. Since then anytime i put on system it show the BSOD at approximately 3 minutes after booting. Currently my system only works fine in safe mode.
View 2 Replies View RelatedI installed Windows 7 SP1 64-bit on a Toshiba laptop which used to have Vista 32-bit on it.Yesterday I put in all the Toshiba drivers and ran chkdsk and am pretty sure it was ok.I ran chkdsk tonight and got a message that was so quick I can barely read it, but on reboot at the end it says "A disk checking has been scheduled. Disk checking has been cancelled" which comes and goes very quickly.In BootExecute in the registry it seems OK and shows it as "autocheck autochk*".
View 6 Replies View Relatedwell i know how to enable and disable hidden fies... going to folder options...show hidden files..ok...
but i wanna know something...i wanna know how many number of hidden files are there separately in a folder and there destinations.
The Offender DVD/CD Drive: MATSHITA DVD-RAM UJ8A2ASW
Computer:
Asus u56e laptop, windows 7 64bit.
Whenever I open up itunes, or I open up winamp, or I open up any AUDIO/DISC related program, my CD drive makes a clunking noise, and checks to see if a disc is in there. The little CD symbol next to my mouse shows up, and then it stops.This happens EVERY time i open winamp, and every time i open itunes.Whats worse about itunes, is it checks the CD drive every 3-4 minutes while itunes is open. Its VERY annoying because when it does this, it freezes iTunes for a second or two.
It also does the disc-check, every time I wake up from sleep mode.Ive had to stop using itunes complletely because of this.oh yea, and my DISC DRIVE IS EMPTY. There is NO disc in the drive ANY time this happens.
I just got a used laptop, popped in a new hard drive, and installed a legit version of Windows 7 Ultimate from scratch. Everything went smoothly, it picked up on all my devices & installed drivers correctly. The only problem is - I can't update Windows. When I go to start--> all programs--> windows update, it goes to "checking for updates" and does that - forever and ever - even if I leave it go overnight.
View 1 Replies View RelatedIt seems that the copy and replace only checks names, but I would want the older files to be replaced by the newer ones, and to be ignored if they have the same names and dates. ouadad has chosen the best answer to his/her question.Click here to view the answer that was selected.
View 1 Replies View RelatedI have installed a legit Windows 7 OS on my laptop. Its not an upgrade, it was a blank hard drive. WIndows 7 installed flawlessly, picked up all my drivers. The only problem is I am having problems with Windows 7 updates. When I choose Windows 7 update, it says "Checking for updates" and stays like that - forever. Even the next day. I did heavy heavy research, found out others are having the same problem. I tried all the fixes I could find, which are listed below:
1. No Anti-virus programs installed yet - brand new Windows 7 ultimate installation
2. There is no spyware - its a brand new clean install
3. Firewall shut off
4. Temp files, cookies, history cleared
5. background intelligent transfer service set to automatic in services.msc
6. software distribution folder renamed
7. tried shutting off automatic updates and doing it manually
8. Added windowsupdate to trust zone
9. ran MicrosoftFixit50202 in normal and advanced mode
Even with my internet SHUT OFF (turned off modem) it still checks for updates and doesn't fail with "No internet connection available".
I have windows 7 64 bit sp1, and when i check for updates it checks for updates with no results. I have let it run overnight and still nothing. It says checking for updates with the green line going back and forth, but never gets any results. Can someone help me with this it is very frustrating.
View 9 Replies View RelatedWhile I was checking my email today my computer started clicking like someone using a type writer very fast. I have run my virus protecter scan and I can't get rid of it.I am running Windows7. Have I got a virus?
View 3 Replies View RelatedIs there a way that I keep checking my emails in windows live mail (it is set to check every minute) without having the window open, so just the tray icon..
View 4 Replies View Related
