Hard Drive Wont Show Up
Dec 18, 2010
Evening, like title says my harddrive wont show up when I'm installing windows 7. I followed the instructions up to the select a harddrive/partition but it wont show and says that I need an installation media for it to be read.
I assume this would be where I need a RAID file from my usb but where would I be able to find/download one from?
Laptop in question is a
Satelite L555-S7916
3 gb RAM
has a 500gb WD Scorpio Blue
Is there anything in particular I need to know or should put down to hep? I'm at a total lost and dont want to do anything dangerous to my laptop.
View 9 Replies
ADVERTISEMENT
Dec 23, 2009
I just installed windows 7 on a home built desktop. Everything seems to be running fine except my 3rd hard drive won't show up. In device manager it shows all 3 hard drives, but in My Computer it only shows 2.
The hard drive that isn't showing up in My Computer (but showing up in Device Manager), is a Seagate Barracuda 7200.12 1 TB.
The hard drives that are showing up are both Seagate Barracuda 7200.11 but one is a 500 GB the other is a 750 GB.
View 3 Replies
View Related
Aug 26, 2011
ok i have a western digital my passport external hard drive. its Mosley contains games and all of my music and a video. ive haven't even had it for a year and it is not showing up on my pc. i did what other forms that i looked at "going through the computer management and changing the later it doesn't work". but when i did it, it took like ten minutes to load up usually when it is in sleep mode. plus when it is loading i went into my pc and the window is not responding i tried to end it. so i unplugged the usb and everything worked again. it works on other pc's but mine. some of my friends said it could be a virus or a Trojan. i dont know what to do to fix this im thinking of getting a new hard drive but i want to make sure i can fix this before i spend $60-$70 on a new one.
View 6 Replies
View Related
Oct 15, 2009
When I turn on/restart the computer, the desktop itself has two hard drives in it (250GB and 1TB, 1TB is not the one the OS is on)
When I put the computer to sleep, and then wake it up, the 1TB is not active, and to access it I have to completely restart the computer. I'm using a legitimate retail version of Windows 7 Ultimate, if that helps any?
View 8 Replies
View Related
Oct 11, 2012
I have a Seagate External Hard drive, Desk Goflex 3 TB.I'm using it for sevral mounth in windows 7 and it's working fine.Now, I bought a new latop using windows 7 as well, and it's not recognizing my hard drive.The hard drive doesn't appear in the Disk Management at all.The computer does recognize other USB devices (disk-on-keys, mouse).
View 1 Replies
View Related
May 28, 2012
I bought a laptop asus K55VM, and switch the optical drive for a SSD. Both drives are format and active since what a want is a clean install.
During the instillation both drives don't show up, i tried to load drivers from intel but nothing shows up. The Bios shows both drivers, i change from AHCI to IDE but no effect.
View 9 Replies
View Related
Apr 6, 2011
I've had Win 7 (on a new laptop) since November. I dislike the way the files are arranged, or at least the way they display, in Explorer. Specifically, the Libraries. Is there a way to eliminate that section and have all folders show up under the hard drive?
View 10 Replies
View Related
Oct 28, 2011
i bought a trix hard drive enclosure/case for my 2.5 250GB hard drive. I connected everything up and inserted the hard drive usb into my laptop but windows will not show the drive in my computer. It does make the beeping noise telling me its detected the drive and it also shows in device management.The strange thing is i tried installing linux on it and it did, but the computer will not boot into it from the enclosure, but does from the hard drive. Ive also tried it on 2 computers and both will not assign the drive and give it a drive letter.
View 2 Replies
View Related
May 11, 2012
I just built a computer for the first time and for the boot drive i have a ssd. With that i have a hard drive. Now windows finds it in device manager but not in "computer". the Bios finds it too. i re installed the driver and restarted still nothing.
View 4 Replies
View Related
Aug 5, 2012
When i plug my WD passport portable hard drive into my computer, the hd will start up (the little LED will eliminate) and windows will make the "usb connection" sound and down the bottom right of the screen i have the option to safely remove my passport 0740. So windows picks up my hd but it just wont show up in my computer, it works on my other computer just not this one. i have tried changing the drive letters and that doesnt seem to help. Any ideas? using windows 7 ultimate
View 1 Replies
View Related
Nov 14, 2012
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 Replies
View Related
Oct 25, 2011
So, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
View 9 Replies
View Related
Oct 22, 2011
winrar installed to get my files in hard drive. I can see the files in winrar but not in windows explorer. how to get this in windows explorer
View 3 Replies
View Related
Dec 21, 2012
I would like to connect my 2.5" external USB hard drive permanently to store my files. However, it seems like my USB hard disk doesn't show up every time I reboot my windows 7. I will need to unplug the usb and then replug it back it for it to be detected, which is a bit of a hassle.
View 4 Replies
View Related
Jul 14, 2012
my windows does not show contents of my hard disk but linux mint do.i doubt if there is any presence of virus and i deleted all .ini files.(unwanted files).and it does not contain any softwares or any executable files. it contain only media,and pdf files.
View 4 Replies
View Related
Jun 16, 2011
I have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
View 2 Replies
View Related
Mar 30, 2012
I have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
View 3 Replies
View Related
Mar 4, 2010
Me and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
View 6 Replies
View Related
Dec 24, 2011
I have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?
View 4 Replies
View Related
Jan 21, 2013
I have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.
View 1 Replies
View Related
Oct 1, 2011
My external hard disk up until a few weeks ago had been working perfectly. The next time I used it - windows 7 will not recognise it. I have tried different USB ports and computers. But it doesn't seem to work. It doesn't show up in device manager or disk manager. Its like nothing is plugged in. I tried switching hard disk cases and power supplies. But still nothing. The hard disk seems to try and run every so often, the light flashed red and it makes whirring noises as if it was connecting to the computer.
I dont know what else to do ? And it has almos 1500 GB of data.
View 1 Replies
View Related
Nov 13, 2012
I recently noticed an issue when trying to connect to external hard drives. Initially noted that it wasn't showing in 'my computer' and so assumed I had driver issues and sought to update them from Dell's site. After doing so there was still no change, but noted that It was appearing in 'device manager'.I even tried updating the USB hubs from the Device Manager, and it states that they are all up-to-date with the correct drivers. Both external hard drives that i have tried has worked on other PC's so i assume that mine is the issue.
View 1 Replies
View Related
Jul 23, 2009
Got this from directory opus site, but made new registry file for you.
1. - unzip drive icons to - C:DRIVE ICONS
2. run registry file
3. reboot pc
Voila!
to undo run the restoredriveicons reg file.
here is original link - http://resource.dopus.com/viewtopic.php?t=7089
View 8 Replies
View Related
Nov 12, 2012
I have two 250gb drives that are connected to my one Eide connection on my Asus P5Q deluxe Mobo. They show in the bios and on startup, but not in my computer or drive manager? How can I get them to show up so I can format and use them as extra space.
View 3 Replies
View Related
Sep 8, 2011
i have brand a new Gateway NV50A with Windows 7 Professional 64 bit. I tried to partition the C Drive with 450GB to make another partition using Spotmau 2009. It displayed a window --that the system needs to restart for partioning. So I clicked on yes. After that it tried to restart and just stops on a blank Spotmau screen doing nothing(Spotmau Powersuite 2009 --Is a computer software used for partitioning and cloning). I tried to restart and bypass this window and start windows. But it doesn't work. I don't want to lose any data. I don't have a Windows 7 Installation CD.
View 8 Replies
View Related
Nov 16, 2009
I have Vista installed on my Hard Drive, 250 GB.
But i recently purchased a 2nd Hard Drive, 500 GB, and i want to install Windows 7 on it.
Is that possible, to have both separately?
View 3 Replies
View Related
Jan 1, 2011
I have just gotten a new and very powerful computer for Christmas, but the disk drive doesn't appear on the My Computer menu. I have checked the bios, and it is there, but Windows 7 doesn't seem to find it. I have Windows 7 64 bit and a Gigabyte 870A-UD3 motherboard.
View 14 Replies
View Related
Jan 30, 2009
In XP and Vista following registry fix made the drive letter of all drives appear first, in front of the drive label:
[HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionExplorer]
"ShowDriveLettersFirst"=dword:00000004
Unfortunately this setting doesn't seem to work any longer in Windows 7's Explorer, and the drive letters remain at the end.
Does anybody know of a working method?
View 6 Replies
View Related
Dec 17, 2012
I have a pen drive having 4gb of data. After I plugged in that pen drive in one PC the datas are not showing. Kindly advice how can I recover the data. I also try to see hidden folders option but after that it also not showing. In properties it is showing 4gb of data in use.
View 1 Replies
View Related
Oct 8, 2011
make a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?
View 5 Replies
View Related
Feb 1, 2009
How to Show Windows 7 Computer Drive Letters Before or After Drive Name ?
View 0 Replies
View Related
