I've had Win 7 (on a new laptop) since November. I dislike the way the files are arranged, or at least the way they display, in Explorer. Specifically, the Libraries. Is there a way to eliminate that section and have all folders show up under the hard drive?
View 10 RepliesI just installed windows 7 on a home built desktop. Everything seems to be running fine except my 3rd hard drive won't show up. In device manager it shows all 3 hard drives, but in My Computer it only shows 2.
The hard drive that isn't showing up in My Computer (but showing up in Device Manager), is a Seagate Barracuda 7200.12 1 TB.
The hard drives that are showing up are both Seagate Barracuda 7200.11 but one is a 500 GB the other is a 750 GB.
ok i have a western digital my passport external hard drive. its Mosley contains games and all of my music and a video. ive haven't even had it for a year and it is not showing up on my pc. i did what other forms that i looked at "going through the computer management and changing the later it doesn't work". but when i did it, it took like ten minutes to load up usually when it is in sleep mode. plus when it is loading i went into my pc and the window is not responding i tried to end it. so i unplugged the usb and everything worked again. it works on other pc's but mine. some of my friends said it could be a virus or a Trojan. i dont know what to do to fix this im thinking of getting a new hard drive but i want to make sure i can fix this before i spend $60-$70 on a new one.
View 6 Replies View RelatedEvening, like title says my harddrive wont show up when I'm installing windows 7. I followed the instructions up to the select a harddrive/partition but it wont show and says that I need an installation media for it to be read.
I assume this would be where I need a RAID file from my usb but where would I be able to find/download one from?
Laptop in question is a
Satelite L555-S7916
3 gb RAM
has a 500gb WD Scorpio Blue
Is there anything in particular I need to know or should put down to hep? I'm at a total lost and dont want to do anything dangerous to my laptop.
When I turn on/restart the computer, the desktop itself has two hard drives in it (250GB and 1TB, 1TB is not the one the OS is on)
When I put the computer to sleep, and then wake it up, the 1TB is not active, and to access it I have to completely restart the computer. I'm using a legitimate retail version of Windows 7 Ultimate, if that helps any?
I have a Seagate External Hard drive, Desk Goflex 3 TB.I'm using it for sevral mounth in windows 7 and it's working fine.Now, I bought a new latop using windows 7 as well, and it's not recognizing my hard drive.The hard drive doesn't appear in the Disk Management at all.The computer does recognize other USB devices (disk-on-keys, mouse).
View 1 Replies View RelatedI bought a laptop asus K55VM, and switch the optical drive for a SSD. Both drives are format and active since what a want is a clean install.
During the instillation both drives don't show up, i tried to load drivers from intel but nothing shows up. The Bios shows both drivers, i change from AHCI to IDE but no effect.
i bought a trix hard drive enclosure/case for my 2.5 250GB hard drive. I connected everything up and inserted the hard drive usb into my laptop but windows will not show the drive in my computer. It does make the beeping noise telling me its detected the drive and it also shows in device management.The strange thing is i tried installing linux on it and it did, but the computer will not boot into it from the enclosure, but does from the hard drive. Ive also tried it on 2 computers and both will not assign the drive and give it a drive letter.
View 2 Replies View RelatedI just built a computer for the first time and for the boot drive i have a ssd. With that i have a hard drive. Now windows finds it in device manager but not in "computer". the Bios finds it too. i re installed the driver and restarted still nothing.
View 4 Replies View RelatedWhen i plug my WD passport portable hard drive into my computer, the hd will start up (the little LED will eliminate) and windows will make the "usb connection" sound and down the bottom right of the screen i have the option to safely remove my passport 0740. So windows picks up my hd but it just wont show up in my computer, it works on my other computer just not this one. i have tried changing the drive letters and that doesnt seem to help. Any ideas? using windows 7 ultimate
View 1 Replies View RelatedMy folders on my hard drive are hidden (the only way I can view them is through Folder and Search Options in Organise). I can not unhide. See this picture for details (it shows ONE of my folders in my Hard Drive that is hidden): Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting.How do I unhide these folders?
View 3 Replies View RelatedI have Win 7 Enterprise installed.
When I click into my IE8 Favorites, my HD folders are appearing there. I did some tests and if I try to delete them, my original HD files are deleted.
Maybe it happened when I tried do bring back my favorites from my backup files (ex Win XP), and I think that IE8 added all folders of my c: hard drive instead of only my favorites bookmarks.
Now, I can't even add new bookmarks.
Please my friends, is there anyway to fix that?
I have 465gb of files and folders on a 500Gb hard drive that needs to be cut/pasted higher in the folder hierarchy.
Here's a visual:
The reason this happened is my HD broke down and I had to send it to a company (ChronoDisk) to extract the information to another HD. This is how they sent it.
I need to move those files because the path used by many programs/files are broken. Is it possible to do this without actually cut/pasting? My guess is it might crash half way or simply not work at all because there is not enough empty space to make a cut.
few folders in my external hard drive are missing. I am running a scan and hopefully it'll fix, but it takes so long to scan the hard drive as it's a 3 TB hard drive.
View 1 Replies View RelatedI am using a brand-new Dell Inspiron One model with a Lacie-model external hard-drive, on Windows 7. All of a sudden, when I click to view my folders, they are completely empty. When clicking on the My Computer option, my hard drive is there, showing 76 GB free out of a total of 232 GB, but everything appears to be gone. When I click on those files, I receive the error stating I am afraid to re-start or unplug my hard drive.
View 6 Replies View RelatedWondering if there should be a STICKY, GROUPS or THREADS for TIPS and TRICKS? in this forum -combined perhaps with a wish list that we can send to MSFT every month
Anyway, one thing I really like about OS X is the ability to drag a folder from desktop to computer, then the window auto opens, displaying root, then you can drag over another folder (which opens to display sub root) and so on until you find the place where you want to dump the folder.
Is there a way to do this in Win 7 (or Vista)?
EDIT: NEW = it will allow you to drag a folder from desktop to start button than into my documents folder. Not bad but better than nothing. All we need now is for my documents to open and have it display sub folders and/or the ability to drag anywhere. Advice?
I have an old hard drive with a ton of pictures and other irreplaceable files on it from a computer I had few years back. In case it makes any difference, the computer that hard drive originally was in ran Windows XP Pro.I recently got a new computer, with Windows 7 and had the hard drive put into this new computer, along with the hard drive that came in the computer.I can get to the drive itself, but when I try to access folders or files, either access is denied or folders which should contain more folders, are empty. I have tried changing the permission and ownership options on the drive, but no luck.
View 3 Replies View RelatedI have a 500gb seagate external hard drive, and already used 240gb space. It worked fine until yesterday suddenly i could not access the files at all. I checked disk management, and it showed that my external drive became RAW drive. I tried to do chkdsk that I learned from one of the forum, and then it somehow has fixed the RAW drive back to FAT32. However I still cannot see any of my files. I opened command prompt, and typed in dir /a and it said 0 files 0 bytes, 4 DIR 288,714, 293, 248 bytes free. How can I bring my files back?? I don't want to lose my files.
View 4 Replies View RelatedI've just recently realized that copying folders to a backup hard drive resets their "created" date. Should my computer ever crash, all my backup files will state to have just been created on that certain date. Me, being the organize-freak I am, have been looking for a solution so my backed up files can have the same time stamps as on my computer right now. I've done a little searching, and have found that people always recommend Robocopy. Problem is, I can't understand a word of the tutorials. How to run Robocopy to carry out what I want? And also just for the heck of it, is Robocopy the only solution? Is there some sort of back up program on Windows 7 that can do that?
View 3 Replies View RelatedI am trying to get my music off my ipod to my laptop win 7 home. 32 bit. When I goto folder options and select show hidden types. I hit apply and ok. but it wont show up and when I return to the menu it stays on hide hidden files.
View 8 Replies View RelatedI have a hard drive that went dead (maybe not totally). Dell put in a new hard drive (like it was from the factory) and I am going to put the 'old' hard drive in the machine as a second drive and hopefully get some word documents etc. from the drive. Is it possible to copy files and from the old drive and install them into WLM and get back my folders and contacts from the old drive.
View 1 Replies View RelatedYesterday night I was in my friends house and he seriously needed help. Hope you genius people help him. All his folders, file and shortcuts show as LNK file in Windows 7 Home Premium 64-bit. I tried scanning his PC with avast!, MalwareBytes, Hitman Pro 3.5 and SAS, but the result was the same. How did it come up? My friend was chatting with his uncle in Skype, he asked him to download 3 pictures, the pictures where names as LNK file, my friend opened the file and after that all his programs, files and shortcut was defaulted to (file name).LNK. He wasted $35 to renew his windows, and he doesn't wants to format either. So is there any way to revert to normal state rather than formatting or system restoring?
View 1 Replies View RelatedWhen I enter at the command prompt of C:
dir /a
then a (JUNCTION) folder "Documents and Settings" is listed which points to
C:Users
However this Junction is NOT visible in WinExplorer? How can I tell WinExplorer to show Junctions as well (maybe in different color) ?
How to Show or Not Show All Folders in the Windows 7 Navigation Pane ?
View 0 Replies View RelatedI'm just migrating over to Windows 7, and am having a hard time with the start menu. I've downloaded Classic Shell so the menu looks like XP again, but I noticed that when I look at 'all programs' some of my programs aren't there. Turns out Windows 7 has two program folders, apparently one is for purely 64-bit programs and the other for ones that still use 32-bit. Does anyone know how I can get both of these folders to show up in the start menu, preferably combined? At the moment, I can only find the 64-bit folder, and can't find the 32-bit folder in the start menu at all.
View 5 Replies View RelatedHow to Show or Hide All Hidden Files, Folders, and Drives in Windows 7 ?
View 0 Replies View RelatedI backed up all of my data files over to a CD/ROM before restoring my Windows 7 PC due to a hard drive failure.
After successfully restoring the Windows 7 PC, I also restored my backed up files from the CD/ROM using HP RecoveryMgr, which was included as part of the backup process. Then I see all folders show "This folder is empty", even though the folder "Properties" show that the folder is not empty and contains files being backed up during the restore.
How can I make the files in the restored folders visible/accessible again?
I have a problem that just started about 2 weeks ago. I upload lots of photos to the web for my job. Once I complete a job I move each folder with the photos into it to a different folder. This keeps my active photo folder clean. About 2 weeks ago I tried to move my completed folders and I got a "folder is in use by another program" error and it would not move.
Eventually after a restart I moved it. Now I have the problem of these already moved and even deleted folders still showing up in their original location. They only show up when browsing my computer to select the files for upload. They do not show up when exploring my computer for the files. I would imaging it is some type of registry problem but I have no idea how to fix it. Windows 7 Home Premium 64bit.
I added my user folder as a toolbar to the taskbar for quick access to its subfolders and files. I had set some of rarely-used system folders in my user folder (such as "Desktop," "Searches" etc.) as hidden, and selected "Do not show hidden folders, etc." in Folder Options. These hidden folders are not shown in Windows explorer's window, but they show up on the taskbar's toolbar. Is there a way to keep them hidden on the taskbar as well?
View 4 Replies View Relatedthis afternoon they began showing only ONE column, on the left side of the folder. the remainder of the folder is blank. see attached screen shot.
View 3 Replies View RelatedHow to do in Windows 7? No option in Windows 7, by Registry? How to do?
View 6 Replies View Related