I have an Advent T9102 and Advent T9308, due to the Advent T9102 being really old and having a few problems and consistently crashing, I decided to take the Hard Drive out of it and make use of it in my Advent T9308 and reformat the whole machine and install Windows 7. Due to my Advent T9308 being Windows XP I first upgraded it to Windows Vista to get all the necessary Windows 7 drivers. Everything worked great once upgraded to Windows Vista. I then used my USB stick to install Windows 7.
When I restarted the Advent T9308 I booted the USB stick and it started loading the Windows files, I deleted all the partitions on the hard drives and reformatted the drives. The installation screen came up and I followed the screen prompts. When it got to the installing Windows part it shot the percentage straight up for the "Copying Windows files" which was odd, but then the "Expanding Windows files" it froze at 1%, I knew it froze because I left it for 30mins and it didn't go up a percentage. I decided to hold the power button for 5 seconds and restart the machine.
On restart the machine got stuck on the very first Advent screen, it currently has "Press DEL to run Setup, Press TAB to display BIOS POST Message", but it doesn't matter what button I press on the keyboard nothing loads up? Obviously no Windows will load up as I deleted the Windows partitions. I am just trying to get the machine to boot up the USB, or, CD so I can install Windows 7, but the machine wont get past the first screen, just before the post bios screen. The machine fans are spinning, the motherboard light is on, no beeps at start up, if you just listened to it it sounds like everything is ok, but its not getting past the Advent first screen?
I don't know much about computers, so when I tried installing iTunes, and the computer completely froze, I shut it off manually, and upon restart, accidentally set all of the BIOS settings for my motherboard to defaults, now when trying to boot my computer, it gets stuck at the loading windows screen, I already tried reinstalling Windows 7..
Computer:
Intel Processor Sandy Bride-E Intel Core i7-3820 3.6GHz (Quad Core) Intel Motherboard 2011 [x-fire,SLI] ASUS P9X79 [SATA III, USB 3.0] Quad - Channel Memory 16GB (4x4GB) DDR3 1333MHz Primary Hard Drive 1TB 7200 RPM Graphics Card AMD Radeon 7950 3GB (Min. 650 Watt Power Supply) Power Supply Standard 800 Watt Operating System Windows 7 Home Premium 64 Bit
I am running an Advent desktop PC and its stats are as follows; Intel Core i5-2310 CPU @ 2.90GHz 8GB RAM Win 7 64 bit.The problem I am having is when ever i boot up the computer it shows the Advent logo-screen where I can access the boot menu etc but then it goes to a black screen with a cursor/underscore flashing in the top left... This screen stays for quite a while and I am not sure if it stops because of a key I have pressed or just because it has run its course but after it disappears the computer goes back to the logo-screen for a moment and proceeds to boot up as normal except slightly slower than usual.It is a relatively new computer and it has no problems running at all once the boot up is complete it is fast and as friendly as ever.
I turn on my computer and it will take me to the log in screen but the mouse is stuck in the middle of the screen and my keypad wont work. So I can't log in and get to my desktop. I've turned my computer off and retried several times. It was doing this yesterday too. I've tried restarting it in all the different types of safe modes, and still nothing.
I have a windows 7 advent laptop. When I turn my laptop on, it works and comes up with the option either to "launch startup repair" or "start windows normally". Whichever one I select, the same thing happens. It goes to the blue screen as normal where I would select my user but that option doesn't come up. It's just the blue screen. I have tried rebooting it, and waiting for it to load for over 10minutes but it doesn't change from that screen. The cursor still works but no keys work on it and there is nothing to click.
I turned on my computer today and it stayed frozen at the starting windows screen for. Long time, but it would not move on. Then it jumped back and started booting the computer again but hung at the same spot. I tried starting my computer in safe mode, but it won't boot into safe mode either. I can not do any of the system recovery options. Also by BIOS has a password on it and I have no clue what it is, So I can't not access my BIOS.
Ok windows stucks on welcome, it will not boot so i am doing a startup repait but its stuckIt asked meif i want to do system recovery and i clicked no cancel , (only repair) but the blue bar that moves while its repairing it doesnt move its frozen and it says attempting repairs... nothing moves
Sometimes when I turn on my computer, the screen will turn on as usual, and there is like a cursor that blinks in the top left corner of the screen, again, as usual. However, it will sometimes stop, and stay on this screen for upwards of a minute or more. The laptop sounds like it's still working, as the fan is going pretty fast and everything sounds like it's spinning, however it doesn't show anything on the screen. After around the minute duration, the screen will go black and the normal boot up process is proceeded with. From what I've read of other people, they can't even get past this screen, which is why I think my problem is slightly different, or the same, just not as severe. Does my problem also sound like it's the MBR, as indicated by other people's questions on the Internet?
If so, is there any easy way to repair it without having to use a windows 7 disc, as I have a laptop and didn't get a disc with it...
Computer is frozen, black screen with movable mouse after splash logo. Same happens in safe mode. The log in screen never shows up. The computer sounds like its loading at that point, but nothing ever comes up. I can get into ubuntu. This happened after updating my graphics card nvidia. I have dual monitors. Windows 7 64 bit Home Premium, HP Pavilion p6107c Desktop.
When booting my Dell Latitude E6410, there is a really loud noise coming from the left side of the computer (what i think is the fan?). It's also very hot and the login screen freezes and I am unable to login)I am however able to login in safe mode no problem and there is no noise or excess heat.I thought that maybe the problem was related to my use of the Anti-Virus program Avast, so I uninstalled and used their uninstall utility.I'm copying my list of installed programs below---I allready cleaned out all of the temp files and deleted anything that seemed iffy or not in use.
32 Bit HP CIO Components Installer Adobe AIR Adobe AIR Adobe Community Help Adobe Community Help Adobe Flash Player 10 ActiveX
i have an advent k4000 laptop and sometimes i just will not start up at all.i switch it on get power on light the hard drive light flickers little bit then just get blank screen.other faults i get sometimes get power light and caps lock and number lock light comes on but does nothing.i know when it is going to work properly is when power light comes on then hd then wireless light comes on.is there any checks i could try to work on the problem.not sure if its hd problem or what.but when i do manage to get working the laptop it self is fine.tried allsorts stuff from Internet to sort problem but really not sure what the issue is.
Advent Roma 2000 Intel Celeron C900 Win 7 Home Premium 4GB DDR2 320GB HDD Intel Mobile 4 Series Graphics
I have removed the battery, held the power for 30 seconds and then connected just the mains and the problems remains. I have removed the Heat Sink and cleaned out the dust and replaced I have tried another RAM chip I have tried another HDD
The only other thing I can think of is to remove the BIOS battery
my system crashed yesterday due to gpu overheating. now it boots till windows animated logo but at the point right when welcome screen usually comes there is nothing now but a moveable mouse cursor on a completelly black background.now i have following stuff to get back to normal: two very old restore points and a recently created macrium reflect system image but no repair disc. i will be very happy, if there is a way to use the image since i know that some of you prefer macrium reflect insted of microsofts system image solution. unfurtuntelly my restauration points are way to old (april 2011).
-AMPPAL.SYS - Address FFFFF880042E3443 base at FFFFF880042CB000, DateStamp 4E3FF366
I'm assuming it's a BIOS driver problem, but i'll leave it up to you guys to tell me, you're the experts :P I also tried doing a system restore, but for whatever reason when I try it just says the restore is initializing and it sits on that screen and never does anything. I've left it for about an hour before and still nothing, not real sure what the problem is there either. Right now I'm running the laptop off safe mode with networking and it's working fine, hopefully it's just a driver problem I can fix.
I'm on Windows 7 32bit and let me know if you need any more information.
my Toshiba Satellite C655D wont reboot it gets to 95% and says error then a blue screen pops up and says it is crashing . Is there anything I can do to repair it . I dont have a repair disk.
I dont know how long before my system will crash again. I just upgraded from 32 bit to 64 bit windows 7 a matter of hours ago, and this never happened in 32 bit (had it for 2 years)...My comp has crashed twice in last 10 minutes with the following error log that will show up when I reboot
I have HP Laptop with window 7 but my screen shows in three peaces its look like broken and shows(look like) creck on it i dont know what i do whether i have to replace the screen? I bought it before 4 months it's new laptop
Ok I was working on warcraft 3, basically the game increases the gamma (due to an internal setting on it) and would normally reduce it again on exit.
After the crash the gamma on my desktop is too high but also cannot be adjusted, some external setting stuck somewhere.
If I go to the nvidia panel and select "adjust desktop colour settings" "other applications control colour settings" is selected, if I choose "use nvidia settings" then my desktop reverts to normal but of course this stops games adjusting the setting.
So my question is can this situation be recovered if so and how? loading the game again and exiting does not recover the setting.
I read through a few threads with similar topics but the issues were either not quite the same and/or resolved comparatively easily. I am trying to repair a 1.5 year-old HP Pavilion running Windows 7 Home Premium 64. This machine is used as the main office computer in a small doctor's office. In spite of my warnings, anti-virus software was not installed until it was too lateThere was a major issue about seven months ago that required another company to repairThe problem is explorer.exe will not run. Double-clicking a shortcut on the desktop, clicking the text name of a program from the Start menu, and even in the cmd results in the same response, a dialog box pops up stating windows explorer has stopped working.
windows is checking for a solution to the problem. followed by another box stating windows explorer is restarting. But the requested application never starts. I have run the Ultimate Boot CD 4 Win, replaced the hard drive and cloned all data, run numerous registry scans, malware scans and antivirus scans. Initially removing over 1500 virus/malware hits and over 1400 registry errors. But the main problem persists, explorer.exe won't open programs.
And I was just finishing putting new stuff in my pc and I can play wow and BF3 and MW3 games from steam and origin but not Fear 3 or deus ex or some games then I get the blue screens and my computer frezzez and just restart's what can I do?
I just rebuild my computer and it worked fine for a couple months now, but recently i have been getting random freezes and ''NVIDIA Adapters'' crashing on me, getting pixelated screens then total darkness and going back to desktop. To a random occasional Reset.Today however i received my first DUMP file and i am happy because i know some of you know how to read the issue within this file.
i have owned asus gaming tier pc for 2-3 months, and this problem came up. I do not know what to do. Do i need to post some information? And some times during the crash, pc losts connection to internet. It's getting really annoying, since i'm tf2 Trader.
EDIT: Now it's doing it constantly, and after some time, mouse and keyboard wont respond.also, when the crash starts, it sounds like usb being plugged in.
I experience intermittent black screen (loss of screen picture) and accompanied by a loud humming sound in my LCD screen when playing with Plants versus Zombies.
This happens even when i am even running the game using XP Mode.
I have to turn off the PC power-off.
Reboot and in Safe Mode
Then shut down my PC
Warm start again the PC.
This is kinda irratting and frustrating with the game and could damage my PC?
