Advent Roma 2000 - Constantly Powers On/off With No Display
May 3, 2012
Specs:
Advent Roma 2000
Intel Celeron C900
Win 7 Home Premium
4GB DDR2
320GB HDD
Intel Mobile 4 Series Graphics
I have removed the battery, held the power for 30 seconds and then connected just the mains and the problems remains. I have removed the Heat Sink and cleaned out the dust and replaced I have tried another RAM chip I have tried another HDD
The only other thing I can think of is to remove the BIOS battery
View 1 Replies
ADVERTISEMENT
Nov 2, 2012
I want to HP laptop dv 2000 display driver for Windows 7 professional
View 1 Replies
View Related
Jul 7, 2009
I was using the Beta since Feb. with no problems whatsoever. When the time limit was up I installed the RC1. I did a freesh install, not an upgrade. Ever since the install, my display will freeze at random and the pc requires a hard reboot. I initially assumed it was a video driver issue. First, I updated all my drivers to the latest, but it kept happening. So I tried the driver for Vista, but it kept happening. Well, gaming and watching video is the main thing I do with my pc, so as is it is useless. I disabled the video driver so I could download another OS but it still freezes, even with no video driver.
I can't stay unfrozen long enough now to download a linux distro, and my XP is no good becasue it doesn't come with the drivers I need to get online, so I can't install it and update the drivers, so basically I'm screwed.
I have searched online for hours, but no real answers. Its frustrating as hell that the beta was working flawlessly, then they made me ugrade, now its broken.
View 2 Replies
View Related
Jan 24, 2012
for about 2 months now my display driver is constantly crashing. I have to boot up in safe mode to stop the worries of the crashing. What'll happen is, I'll be doing something simple, possibly even playing a low graphic game such a Minecraft oropening a .txt file, and the screen will freeze and start flickering black. It'll come back to the desktop and say something along the lines of "Realtek Display Driver has crashed and successfully recovered." Yes, it's recovered, yayy, but no about 10 seconds later it'll keep crashing, until the extent of where the screen just is stuck on a black screen. I'm really getting angered by this, if any help can be provided, please post below.
View 2 Replies
View Related
Mar 4, 2012
All of a sudden my screen was black. my background , wallpaper are gone.I can change it to a different but I can't get my old background back. When I try to reset them , it goes black. I didn't do anything to it that I can think of.
View 4 Replies
View Related
Sep 9, 2012
my advent netbook has a sim slot. i want to insert my sim and use it as a modem. how do i do that
View 1 Replies
View Related
Jan 10, 2013
i have an advent k4000 laptop and sometimes i just will not start up at all.i switch it on get power on light the hard drive light flickers little bit then just get blank screen.other faults i get sometimes get power light and caps lock and number lock light comes on but does nothing.i know when it is going to work properly is when power light comes on then hd then wireless light comes on.is there any checks i could try to work on the problem.not sure if its hd problem or what.but when i do manage to get working the laptop it self is fine.tried allsorts stuff from Internet to sort problem but really not sure what the issue is.
View 1 Replies
View Related
Jan 22, 2013
I have an Advent T9102 and Advent T9308, due to the Advent T9102 being really old and having a few problems and consistently crashing, I decided to take the Hard Drive out of it and make use of it in my Advent T9308 and reformat the whole machine and install Windows 7. Due to my Advent T9308 being Windows XP I first upgraded it to Windows Vista to get all the necessary Windows 7 drivers. Everything worked great once upgraded to Windows Vista. I then used my USB stick to install Windows 7.
When I restarted the Advent T9308 I booted the USB stick and it started loading the Windows files, I deleted all the partitions on the hard drives and reformatted the drives. The installation screen came up and I followed the screen prompts. When it got to the installing Windows part it shot the percentage straight up for the "Copying Windows files" which was odd, but then the "Expanding Windows files" it froze at 1%, I knew it froze because I left it for 30mins and it didn't go up a percentage. I decided to hold the power button for 5 seconds and restart the machine.
On restart the machine got stuck on the very first Advent screen, it currently has "Press DEL to run Setup, Press TAB to display BIOS POST Message", but it doesn't matter what button I press on the keyboard nothing loads up? Obviously no Windows will load up as I deleted the Windows partitions. I am just trying to get the machine to boot up the USB, or, CD so I can install Windows 7, but the machine wont get past the first screen, just before the post bios screen. The machine fans are spinning, the motherboard light is on, no beeps at start up, if you just listened to it it sounds like everything is ok, but its not getting past the Advent first screen?
View 3 Replies
View Related
Jan 10, 2013
Advent laptop wireless drivers downlad for windows xp
View 1 Replies
View Related
Mar 26, 2012
I've been all over the internet trying to figure this problem out, but when I try to put my computer to asleep, it does as I described in the subject line. It's a new PC, though it was custom builtnyway, I've tried a dozen tips and tricks that haven't worked, and I'm sorry I can't remember what they all were. I've tried adjusting the Power settings, and tried changing options somewhere that said "Allow computer to sleep". With all the changes I've made, it should sleep
View 4 Replies
View Related
Jun 17, 2011
My PC (ASUS N61JV) is misbehaving. It powered off unexpectedly. When I Switched it back on, only thing i could see was a Blue Screen. I ran all the required tests and am attaching the reports for your convenience. I am using x64 bit version of Windows 7.
View 2 Replies
View Related
Nov 5, 2011
On startup, power comes on, the hard disc runs and the system starts to boot but after 10 or 15 seconds the system powers off. This is a sudden and repeatable event, the screen sometimes getting into 'startup repair', but always powering off before any Recovery. After removal of the harddisk, memory slots and video card, I can poweron continuously and the main fan runs ok. A second fan (video chip?) does not run. Replacement of the hdd and memory is ok but as soon as the video card is re-installed the system returns to powering off after 10/15 seconds. The video card is an nvidia gtx go 7900/7950 and I don't want follow an expensive path of unit replacement- the laptop is 4 years old, a Rock Xtreme CTX Pro (a Clevo generic laptop with a Hannstar J MV-4 motherboard.
View 8 Replies
View Related
Mar 15, 2009
I have an hp dv5215us that I have been running off a power cable with no battery for quite some time now, hooked up to a secondary display, a Dell E151FPp. Every now and then I will unhook the secondary display and take the laptop with me to work without issues. Last night I popped my Win 7 install disk while running XP to install, clicked what I needed to, and let the install disk run. Now that Win 7 is installed, I am running into the following two issues:
1) When the secondary monitor is unplugged, the computer will not power on, let alone boot. No blue lights, nothing.
2) When the computer is on and I unplug the secondary display (I learned the hard way), the laptop powers off instantly, as if I unplugged it from the power source.
I looked in device manager under monitors and it only shows one. I am getting mirror screens now, and under the display options, the resolution options available to me look like those for the secondary monitor, not for the laptop monitor. I installed Windows 7 with the secondary plugged in.
I bought a new battery for the laptop online last night. I know it sounds like a hardware issue rather than an OS issue, but the laptop and secondary display didn't move anywhere since it was running without issues in XP, so unless there was some kind of short or something while the installation was taking place, I can't think of why this would be happening.
Any suggestions?
View 1 Replies
View Related
Jun 20, 2012
Ok well we had some lighting today but power did not go off, maybe made some of the things flicker for half a second.After PC shut down went to go turn it back on, would boot for a few seconds but then turn off, never got the beep from the mobo or anythings..Things i tired.
-Different power supply (same thing)
-Removed CMOS and put back in (same thing)
-left all but 1 ram in (same thing)
I am thinking its the mobo but i want to be 100 % sure before i go out an buy a used one, as for some reason 1366 mobos are expensive.
View 5 Replies
View Related
Jul 20, 2012
I built a computer for a friend. I used the $500 build, found here: I kept everything the same except I got a core i5-2310, and a zotac GTX 560ti, instead of the ECS(due to mail in rebate). It powered on initially fine. I installed motherboard drivers and video card drivers off the cds provided. I rebooted once, and began running windows update. I noticed performance was slow. So I checked task manager and CPU usage was at 100%, and then it just turned off. So i tried to reboot it, with no luck. I removed video card thinking that uses the most juice, and it still did the same thing. Reseated everything, put new thermal paste on cpu and still same thing. System turns on for 3-5 seconds then everything turns off. No beeps, etc. Im kind of at a loss. I did think it was odd that the PSU was only 450w, and gtx 560ti says 500 minimum. Could that be the issue with the core i5 i threw in there over the celeron g530 Edit: some odd behavior I noticed. When I pressed shutdown. It said windows is shutting down, but the PC restarted. Though that was weird.also tested with my 500w raidmax psu.
View 12 Replies
View Related
May 7, 2012
I am running an Advent desktop PC and its stats are as follows; Intel Core i5-2310 CPU @ 2.90GHz 8GB RAM Win 7 64 bit.The problem I am having is when ever i boot up the computer it shows the Advent logo-screen where I can access the boot menu etc but then it goes to a black screen with a cursor/underscore flashing in the top left... This screen stays for quite a while and I am not sure if it stops because of a key I have pressed or just because it has run its course but after it disappears the computer goes back to the logo-screen for a moment and proceeds to boot up as normal except slightly slower than usual.It is a relatively new computer and it has no problems running at all once the boot up is complete it is fast and as friendly as ever.
View 4 Replies
View Related
Sep 28, 2011
Got my computer back from having its PSU fixed, and this is happening.When I press the power button, it powers on for a second, then off, then back on again automatically and actually stays on this time. It does this every time.
View 3 Replies
View Related
Mar 9, 2012
I am having this problem for past a week.as soon as the charger is plugged into the laptop, the laptop gets automatically turn on (without pressing the power button).The laptop fully boot and not geving any other problem.A laptop should turn on only when the power button is pressed. What makes the power bypass the power button and turn on? i don't know why this stupid laptop behaving like this i am very frustrated now because when i plugged it in it gets boot and i have to manually shuts it down every time.
View 4 Replies
View Related
May 2, 2011
While off, my computer (Dell Optiplex 755) suddenly powers on and two seconds later powers off again. This happens every 20-30 minute 24/7.
View 2 Replies
View Related
Jan 24, 2010
I don't know what this could be, I set my system to power off the monitor instead of using a screen saver. When ever I try to power it back on the screen will come on with the desktop as I left it, but the computer freezes.
So I reboot and during the reboot it checks my C drive for consistency, never finds a problem. Other than that the system works fine, and it doesn't happen every time, more like once or twice a week. It happened twice today which got me fed up enough to ask the community. I have no clue what it could be, I thought it might be the C drive going out, but it's a new SSD, actually it's a replacement as the first one I bought died after about a month and OCZ sent me a new one.
Asus P6T Deluxe V2
i7 920
12gb OCZ High Perf RAM
120gb OCZ Vertex SSD
1Tb WD HDD
Lian LI 750W
nVidia Quadro 3800
Win7 Home Premium
View 3 Replies
View Related
Feb 3, 2010
I put my laptop in sleep mode before leaving to star bucks.I open my laptop and press the power buttonThe internal fans start turning as well as the disc drive, but the screen remains blank.I have heard that Windows 7 has multiple issues with the sleep mode, and I'm pretty sure laptop is now stuck in hybrid sleep? Also, I noticed that there is a hotfix for this provided by microsoft, but I would have no way to use this since my computer cannot get stuck out of this. After Researching this, I heard some people taking out the battery and holding the power button down for 30 seconds, then running it off of a/c power.
View 9 Replies
View Related
Jul 31, 2012
I recently opened my laptop (already void of Warranty) to clean up the dust from the FAN which was giving so much of noise. After replacing the fan - i was able to control the noise - but my laptop starts to powers down automatically. This does not happen always. I checked the below things
1) Power Supply - no issues
2) Battery - no issues
I am not sure what is causing the laptop to power down automatically.
View 5 Replies
View Related
Jul 8, 2012
I just built a new computer, installed Windows 7 and all that, worked great. However, recently, when I leave the computer on by itself, after a while I will come back and the computer will have randomly shut itself off. Mind you, it isn't a full shut down, such that when I hit the power button again, it doesn't go through a full windows boot, just takes me to the login screen to my user account. What also happens at this time, is that my computer does not recognize my monitor's optimal resolution. I then have to go into the control panel and hit detect every time this happens, so that the computer displays on the whole screen.
View 5 Replies
View Related
Jan 31, 2013
I put my Windows 7 laptop to hibernate when it is plugged to the power source. When I unplugged the laptop from the power source, the laptop powers off. The next time I turn on the laptop, it is restarted and I see the screen with a message that says Windows was not properly shut down.
View 3 Replies
View Related
Nov 26, 2012
I have 4 computers in my office.Out of 4,3 of them has a problem for the past 2 months.They all run windows 7.
They keep working for about 30 mins to 1 hour after which they suddenly goes into power saving mode.The monitor goes dark but the CPU light and the fan still work.Then after 10-20 seconds it automatically restarts.
When logging in after the restart,It shows "The system has recovered from a serious error".This happens every 30 mins and for these 3 systems.(I bought it from the same shop last year),But the other one works perfect for about 4 years.
I have tried cleaning the fan,sink and even reinstalled a fresh copy of windows 7.Still the problem persists.
View 1 Replies
View Related
Nov 22, 2011
The problem started 7 months ago, but it was minor. Mostly, while gaming, in the main menu, the PC just shuts down. Sometimes it gives me " Stop errors". The last STOP error was 0X0000007F. I've updated BIOS and the Graphics Driver.
View 1 Replies
View Related
Dec 1, 2012
I have a
Lenovo Laptop Thinkpad Edge E520
8GB RAM
Intel CPU B960
Pentium Processor 2.2GHZ
Recently when I have powered up my laptop it occasionally doesn't load properly, the screen stays black. You can hear the laptop working fine but you cannot see anything. This happens once or twice a week, I usually hold on the power button for 5 seconds, then reboot and it resumes my hibernate settings as usual. Could this be because I always hibernate my laptop?
View 2 Replies
View Related
Aug 23, 2011
[code] I am using a single Seagate 250gb HDD and a bog standard LG CD drive and have removed my networking and graphics card in an attempt to rectify the issue.My problem is in the first time windows7 Professional 64bit installation. The machine powers does immediately after the the 'Loading Windows' screen every time without fail.
View 4 Replies
View Related
Aug 26, 2012
I have a new laptop running Win7 Home Premium. I also have another (older) laptop running the same. The problem is that although both are 64bit, the older one loaded and runs Office 2000 quite happily, but the newer one says it's incompatible!
1, Why does one comp run it and not the other?
2. How can I make it compatible?
View 5 Replies
View Related
Mar 10, 2012
I have an ECS H61H2-M2 mobo with a G620 cpu. Makes a nice budget rig, but I was thinking of using it as an HTPC in the near future. It only has a VGA out right now. What would be a good video card to upgrade to with HDMI and DVI? Low profile and fanless would be optimal but not mandatory.
View 2 Replies
View Related
May 17, 2012
I have 2 identical windows 7 pc's that I just setup. They are both running windows 7 pro x64. I installed office 2000 small business with sp1. One one machine word and excel will launch just fine. On the other machine, excel will launch but word hangs.I tried starting word in compatibility mode and as an administrator. That didn't work. I lauched it from the run command using the /a and it would start. I looked and there are no startup macros that run
View 1 Replies
View Related