Boot Mgr Missing And Unable To Repair
Aug 22, 2010
I was trying to reclaim some unallocated space on the drive and in the process seem to have lost boot manager, so it won't load Windows. If I put the disc in, it's not able to automatically able to repair because it says the repair disc I'm using is not compatible with the OS I have installed. This is the same disc I used to install Win 7 in the first place. Tried using cmd prompt to reload boot manager manually,and it completes the operation successfully but still says bootmgr is missing at start up.What's scaring me is that if I try to just install Win 7 again (onto the unallocated space), the hard drive just turns off and the hdd light comes on solid. This is when I choose 'Install Now' from the opening screen before selecting partitions etc. I'm typing this post from a spare hdd. The only thing I can think off at this point is the get an enclosure and recover my files; then wipe the hdd in question and reinstall Win 7.
View 6 Replies
ADVERTISEMENT
Oct 28, 2011
I just got a computer for free, a Dell Studio 1555. When I got it, it would try to boot, then come to a screen that said that bootmgr.exe was missing. Sometimes I got a message that said something like mpio.sys was corrupted or missing. I have a Win 7 disk, so I put it in and tried to repair the installation. Each time I ran it, it said that the repair had failed. I tried to reinstall windows 7, and It made it to the first restart in the process. It showed the "Starting Windows" screen, but the colors of the windows logo never appeared, then I got the missing bootmgr screen. I decided to install Ubuntu and see if that worked, and it did (I installed it alongside the Windows installation). It was Ubuntu 10.04. I thought, "OK, so i'll just use this as a Linux machine"...and I decided to go back and reinstall so that I could use the entire hard drive. It never worked correctly again. Each subsequent time that I installed Ubuntu, I was told something along the lines of "Gnome Power Manager did not install correctly" and got a slow and choppy Ubuntu installation.Tried to install 11.10, and it failed completely. I opened the Ubuntu live from my usb drive, and opened the disk utility. I now cannot format, reformat, partition, or delete partitions on the drive. Is all of this just a case of a hard drive on its last legs, or is there something else going on here?
View 1 Replies
View Related
Aug 3, 2011
I've installed Windows 7 alongside Ubuntu and was using grub2 bootloader, after changing my graphics card and moving removing some old hard disks when I try to boot the Windows partition I get the blinking underscore screen indefinitely.I tried recovery from the DVD, the Windows install is not recognised in the list, it's just empty, clicking load drivers I can navigate to the drive - it's there as D:, I can see the Windows directory and files, the C drive is another NTFS partition without a Windows install. As it doesn't recognise the install, startup recovery doesn't work.I then tried bootrec and bcdedit from the command line, eventually I hit a wall with an error that there is no recognised file system - despite it being available in the Load Drivers dialog earlier.
View 2 Replies
View Related
Dec 30, 2012
I have a hp G71-449WM Notebook running Windows7 premium 64bit. I can't boot computer the repair disc I have doesn't seem to work. I have no installation disc to fall back on and I can not seem to get it to boot in safe mode. Right now its asking me to find the needed driver in the driver folders. Unless it's called something else I do not see a bootmgr driver. Right now its asking me to connect to the network which would be cool but i don't know what folder they where asking me to type in.
View 3 Replies
View Related
Aug 6, 2011
I started the StartUp Repair again and it has this error: Code: Root cause found:
Boot manager is missing or corrupt.
Repair action: File repair.
Result: Failed. Error code = 0x15
time taken = 0 ms
What does this mean?
View 2 Replies
View Related
Feb 15, 2012
Previously I have installed Windows XP then Windows 7 in different drives of my computer. Later installed Ubuntu 10.10 inside Windows 7 and upgraded it to 11.04.After that Accidentally I have formatted Windows XP drive from Ubuntu. I installed XP again to the same drive. I tried to repair Windows 7 and it worked fine, but the problem is I can boot only Windows 7. I have used BCDEdit tool to add entry to boot menu. This also worked fine that I am able to boot both Windows 7 & Windows XP.Now I want to boot Ubuntu 11.04 also using already installed partition.I don't want install it again(as I have to update it to 11.04 again).I have Windows XP in C drive, Windows 7 in D drive and Ubuntu 11.04 in E drive.
View 1 Replies
View Related
Dec 30, 2011
Method 1: Message states a fix was made.Root cause found: The partition table does not have a valid System Partition.
Repair action: Partition table repair
Result: Completed successfully. Error code = 0x0
However, problem persists after reboot. The wizard indicated that multiple reboots may be necessary, but the wizard does not restart after reboot.
Method 2: Attempted to use Bootrec.exe /FixMbrMessage: The operation completed successfully.
Attempted to use Bootrec.exe /FixBoot
Message: Element not found.
Attempted to use Bootrec.exe /RebuildBcd
Message: Element not found.
Attempted to export and delete the BCD.The command bcdedit /export C:BCD_Backup returned:The store export operation has failed.The requested system device cannot be found.Method 3: When I attempt a system restore, it errors with: To use System Restore, you must specify which Windows installation to restore.When I view the System Recovery Options dialog box, no Windows installation drives are listed.In addition, when I view the C: drive in the DOS window (my Windows installation drive), that drive lists as empty.
View 3 Replies
View Related
Sep 13, 2012
I have a brand new Sony SVT13112FXS - hard drive is a hybrid of 500 GB HDD and 32 GB SDD.I was attempting to reformat it to get all of the anti-virus stuff off, except when I tried to reformat no disks were shown in the reformat tool. It asked for drivers, so I assumed I'd need to install the SATA/chipset drivers. I downloaded them from the Sony website but it wouldn't allow me to install them (from a flash drive). Specifically the error is "No drives were found. Click load driver to provide a mass storage driver for installation."In my troubleshooting I (stupidly) marked the wrong partition as active and got the dreaded "bootmgr is missing" upon restart. I attempted to repair using the windows 7 disk as a recovery tool and selected "startup repair" 3 times, but it still does not work.I am able to get into command prompt and I am assuming I can inactivate the (wrong) active partition there. However, when I go into DISKPART and type "list disk", all that shows up is my flash drive that I am attempting to install windows from - the computers hard drive does NOT show up here.I will also happily completely reformat instead of repairing, but I cannot do that since I can't get the disks to show up in the reformat tool.
View 7 Replies
View Related
Jan 3, 2013
My problem is how to restore "Repair your Computer" option in Advanced boot options ?I deleted system reserved and transferred MBR to my System Partition .
View 1 Replies
View Related
Nov 14, 2009
I just recently performed a clean install from Vista 64bit to Windows 7. I have two internal drives Local (C: ) and (F: ). I made sure I installed Windows 7 on my local (C: ). Everything installed fine and I got Windows 7 to work.
The problem is when I restart my computer, I get the "Bootmgr is missing". I am only able to get to my desktop if I have my DVD set to top boot device in my BIOS, AND if I have the Windows 7 dvd in it.
I searched everywhere for a solution and it seems like the way to fix this is to boot from Windows 7 and do a startup repair. I did this, but I am still getting the exact same problem.
When I am on the system recovery window , I noticed it shows my (D: ) drive (even though it is set to (C: ) but it shows the same size of my (C: ) drive.
How Do I fix this?
View 8 Replies
View Related
Dec 14, 2012
windows 7 startup repair on every boot but after startup repair hibernate works. How to fix?
View 1 Replies
View Related
Mar 9, 2011
I have installed SP1,I have tried to run a repair because I cannot run Backup!! but it says "your current version of windows is more recent than the version you are trying to upgrade to!Is this another mess by created by Microsoft ?
View 9 Replies
View Related
May 24, 2011
Right, i'll try to explain it not to detailed; -Was multitasking between online videos and facebook, when suddenly one of those 'Do you trust 'such and such'' windows came up (with the dimed background). -I cannot remember what it said but it wouldnt let me press 'No'. -So I had to trust it (but I would have pressed 'Yes' anyway). -So when it went away, displayed on my screen was a new window, and again I didn't really look at it, but I defintely remember that it was an error window. Again I pressed yes, and this was because I didn't understand a word of it.This is where my problem comes in; -After pressing 'yes' the computer restarts and comes up with a 'System Repair' screen, tells me that its looking for the problem. -When finished it says 'Unable to repair' or something along those lines, and then followed by 'remove all external hardware (mp3s, controllers etc) and try again' -I do this, doesnt work same screen. -And now i'm stuck. EDIT: Its the 'Startup Repair' option/window in the 'System Recovery Options' window.
View 3 Replies
View Related
Jan 26, 2010
Two weeks ago my computer came down with a blue screen of death. I was running Windows 7 at the time on a fairly new system (little over a year old). Great gaming PC, never had any real issues. I was unable to get past the Windows loading screen, I was unable to load up in safe mode, I was unable to start up from the last known configuration, and I was unable to run a Windows repair. All options failed. I tested the memory to see if my RAM was messed up; RAM was fine.
So I installed a brand new hard drive in today, fresh and clean. I popped in my Windows Vista DVD (I don't have a DVD for my 7) and started installing Windows Vista on the new hard drive. All was going fine. Then it finished installing and immediately I was struck by the BSoD in the same spot as before; couldn't even log in. So apparently it's not a Windows problem, there's a serious issue with my PC itself. What is wrong?
View 3 Replies
View Related
Jul 15, 2011
Today i on my laptop ( asus vx 6 ) and i got an error say " Bootmgr is missing "i load up my CD and went into recovery option, and my OS was never listed over there.
View 8 Replies
View Related
Nov 3, 2012
I've also tried the command prompt trick on here to no avail either. Strangely, whenever the Windows CD is in my CD-ROM, it starts up fine and works. However, I will go to work and come back after having left it on and it will be back to the BOOTMGR is missing screen inevitably by the time I get back, so I don't know long it stays working with the windows 7 CD in. Would a clean re-install of windows 7 do it? I would prefer not to but it isn't out of the question. I am something of a computer novice, but as best as I can tell, I have a Corsair SSD with windows installed on it, and a separate regular old HDD from Seagate for storage of media.
View 7 Replies
View Related
Nov 11, 2011
Well I have been trying to fix this error for hours And after the system recovery scan it says there are problems with my start up options but I cant hit those buttons because the s2 keyboard I have in simply wont let me. Secondly I have ran the repair tool but it says I have to manually fix this problem so I tried using the command prompt but to my great luck again I cant get to that option because of my keyboard so I think the real question here is what do I have to do to my keyboard to land over all of the settings?
View 5 Replies
View Related
Sep 15, 2012
I tried to add a new HDD to my computer which ended up making my computer unbootable.At first I had the "Restart and select proper boot device" problem, which was fixed.After that the Bootmgr is missing. I searched all over and still have not been able to fix the problem, here's the things I tried: [code] Having it the only HDD in the computer no change.The harddrive only worked with my laptop's HDD inside.
View 2 Replies
View Related
Jun 14, 2010
I've just built my own computer with a friend and we installed windows 7 and it worked fine for 3 days. Then it started to not respond. Restarted the computer and it wouldn't start up again, came up with a bunch of errors. So I reformatted and it says "windowssystem32driverwdf0100.sdf is corrupt or missing." I've tried system repair but it won't work. It won't open command prompt or anything.
View 3 Replies
View Related
Aug 8, 2010
I recently took my pc in for repair of the raid drive. The service center used a software which allowed them to change my password, so that they could access the pc. however I believe it damaged my profile because now, I can not change the password from password and outlook no longer remembers any of my email passwords, I must reenter them all each time I run outlook. I am trying to avoid creating a new profile.I am running Windows 7 Professional 64x with a mirrored 2TB drive. Simple peer to peer workgroup
View 6 Replies
View Related
Apr 1, 2011
Today while listening to a song. My computer restarted with a BSOD. It then asked me to repair my computer saying that some boot record is corrupt. I repaired my computer from the cd. It works fine but now i can only see my C: and no other drives are being shown though the data is still there. I cant see the remaining three partitions in my computer
View 9 Replies
View Related
Feb 25, 2011
I am attempting to run a complete system recovery (factory restore) on Windows 7 using a recovery partition. Last time I ran the recovery, I ended up having a lot of problems with system programs not being installed correctly, and with the system administrator account. Now, when I reboot and use the F8 option to bring up the boot options, I do not have an option to "Repair your computer" as I had before. I also tried rstrui.exe through the command prompt, but it only tells me that "No restore points have been created on your computer's drive. To create a restore point open System Protection."
I also checked my drives through DISKPART to make sure there were no problems with the recovery partition, but it is showing up normal. On the Windows knowledge database it said that if the system recovery options are missing, then the system is not installed with the options or they were disabled by the network administrator. Given that I had no problems accessing these the last time I ran the recovery, I'm assuming something happened with the account. I am set up with 1 user in the system, which is the administrator.
1) Re-enabling the options so that I can access the "Repair your computer" options on the boot menu.
2) Run the system recovery options without having to get into the bootup menu.
View 14 Replies
View Related
Apr 4, 2012
i have a Acer Aspire 5755g-6841 laptop, and yesterday i started getting this message. "bootmgr is missing" after i tried to do a system restore. The attempt at the system restore ended bad with it not finishing and me having to reboot my laptop. It was stuck at 99% completion for 5hrs. Now when i use 2 different restore discs that i made for windows 7 64-bit from a downloaded iso, i get stuck in the recovery options menu with the blue loop never ending and no OS being loaded to be selected. Also anytime i try to use the eRecovery from pressing ALT+F10 it gets the blue loop there and never loads.
View 3 Replies
View Related
Nov 9, 2011
Boot loader is missing from HD. I entered the windows repair from dvd, and it finally showed the windows installation, C:Windows (recovered). Tried selecting it again to have windows reinstall MBR, but now it says version is not compatible. So, needless to say, I can't proceed any further. The only thing I can figure is the the windows dvd is both x86 and x64, thereby not recognizing that I have the x64 installed.
View 6 Replies
View Related
Feb 3, 2012
I have a Toshiba Satellite C655-S5132 that just shut down & now will not boot Windows 7. Just goes to black screen w/blinking cursor then goes to 'startup repair' (which I'm postiive this is a virus of somekind) & will not allow me to do anything. Just repeats itself. I downloaded Windows 7 repair to a CD-R, chgd BIOS settings to CD/DVD to boot first, saved changes, and will NOT pull/boot up from disc. I've tried 2diff repair discs, both do not work. 'F8' does not do anything for me, not able to get to 'safe mode'. Computer is only 2yrs old.
View 9 Replies
View Related
Nov 2, 2012
Recently I had an issue with Chrome (which is now solved), But during solving the error I done an SFC Scan as it was a windows .DLL that was reporting to be in error and the scan found a few files that were un-repairable.I also downloaded a Windows 7 Installation Disc from Digital River; Here.After extracting the required files from the .iso files with 7-Zip, I changed the ownership of them and 'Moved and Replaced' the old files with the new files.
These are the files I replaced;
autochk.exe
blbres.dll
netcfgx.dll.mui
icardres.dll
winshfhc.dll
I then re-booted in safe mode with CMD Prompt and re-scanned with SFC, but the same files are reporting they are in error. Are they important? Is there another way to repair them? I am running Windows 7 Home Premium, I have attached the most recent SFC Scan.
View 3 Replies
View Related
Dec 17, 2012
When I recently tried to boot up my system all I could get is a blank screen. Tried to boot up using Windows 7 repair disk but it goes into a loop at the "starting windows" screen consequently won't boot up for me.
View 1 Replies
View Related
Jan 15, 2012
I recently downloaded a damaged file, which caused my computer (not this one) to be unable to start up normally. The computer now boots up in Startup repair, which is unable to repair my computer "automatically" and when I then click "View advanced options for system recovery and support" and go to the "System restore" tab and choose a Date and time for the restoration, it tells me that "There is not enough free space to restore the disk". I seem to have no options to try and sort out the missing space on the harddisk, which should be unnecessary because I am pretty sure there is still alot of disk space on the C.
View 1 Replies
View Related
Feb 16, 2012
i got a hp pavillion running windows 7 i was installing the windows update and pressed restart now, after this the force restart thing came up but i pressed cancel and it didnt like this, after 2 minutes of program errors it restarted and went straight into startup repair. running it on normal mode doesnt work and safe mode is not available. when it runs startip repair it wont fix anything and tells me to restore, i can get to the windows restore part and have restore points but they do not work and an error is shown, x8000xffff if i remember correctly.
View 2 Replies
View Related
Jan 11, 2012
I am having a bit of an odd issue with my Alienware MX11 laptop. I just restored it to a previous "checkpoint" after just having the error "Failed to save all the components for the file \System32\000052af. This file is corrupted or unreadable This error may be cause by a PC hardware problem." After restoring via Control Panel it is running generally fine. However, my issue is wanting to reset it to factory default settings. I've reset to the Factory Image before with previous Dell laptops, but for some reason the repair menu will not load past the black screen with the grey bar on the bottom with the words "Windows is loading files..." After the bar fills white (very quickly might I add) it returns to being gray and sits there.
Is there another way to return to factory image or a way to fix this?
This laptop is still fairly young (got it last month) and the warrenty is still good.
View 2 Replies
View Related
Oct 29, 2012
How to repair missing operating system in asus laptop computer
View 5 Replies
View Related
