Boot Manger Is Missing / Unable To View Hard Drives
Sep 13, 2012
I have a brand new Sony SVT13112FXS - hard drive is a hybrid of 500 GB HDD and 32 GB SDD.I was attempting to reformat it to get all of the anti-virus stuff off, except when I tried to reformat no disks were shown in the reformat tool. It asked for drivers, so I assumed I'd need to install the SATA/chipset drivers. I downloaded them from the Sony website but it wouldn't allow me to install them (from a flash drive). Specifically the error is "No drives were found. Click load driver to provide a mass storage driver for installation."In my troubleshooting I (stupidly) marked the wrong partition as active and got the dreaded "bootmgr is missing" upon restart. I attempted to repair using the windows 7 disk as a recovery tool and selected "startup repair" 3 times, but it still does not work.I am able to get into command prompt and I am assuming I can inactivate the (wrong) active partition there. However, when I go into DISKPART and type "list disk", all that shows up is my flash drive that I am attempting to install windows from - the computers hard drive does NOT show up here.I will also happily completely reformat instead of repairing, but I cannot do that since I can't get the disks to show up in the reformat tool.
I have two 250gb drives that are connected to my one Eide connection on my Asus P5Q deluxe Mobo. They show in the bios and on startup, but not in my computer or drive manager? How can I get them to show up so I can format and use them as extra space.
i am a newbie as far as computer hardware is concerned. after struggling for days to install windows 7 onto my new pc which came without and 0s installed,[code] it list the 465 which i use for storage but the 30gb where the 0s is installed dosent show. surely if the hard drive had a problem the 465gb wouldnt show as it an te 30gb makes up te 500gb? i tried selecting the 465gb volume enter and then exiting diskpart then it says BOOT MGR IS MISSING PRESS CTRL +ALT+DEL TO RESTART..so basiclly i have read almost all forums concerning this and followed most of the steps listed above for however mine says boot manager missing or corrupt, wen ever i run start up repair its says start up repair cannot repair this computer automatically.
I read the many articles with relation to the above error - didn't come with a win7 disk just the drivers disk. the rebuild command didn't work any other suggestions how to restart pc?
I just got a computer for free, a Dell Studio 1555. When I got it, it would try to boot, then come to a screen that said that bootmgr.exe was missing. Sometimes I got a message that said something like mpio.sys was corrupted or missing. I have a Win 7 disk, so I put it in and tried to repair the installation. Each time I ran it, it said that the repair had failed. I tried to reinstall windows 7, and It made it to the first restart in the process. It showed the "Starting Windows" screen, but the colors of the windows logo never appeared, then I got the missing bootmgr screen. I decided to install Ubuntu and see if that worked, and it did (I installed it alongside the Windows installation). It was Ubuntu 10.04. I thought, "OK, so i'll just use this as a Linux machine"...and I decided to go back and reinstall so that I could use the entire hard drive. It never worked correctly again. Each subsequent time that I installed Ubuntu, I was told something along the lines of "Gnome Power Manager did not install correctly" and got a slow and choppy Ubuntu installation.Tried to install 11.10, and it failed completely. I opened the Ubuntu live from my usb drive, and opened the disk utility. I now cannot format, reformat, partition, or delete partitions on the drive. Is all of this just a case of a hard drive on its last legs, or is there something else going on here?
I have a hp dv 6000 i was trying to dual boot my pc with win 7 and xp pro, with win 7 installed first. in order to install xp i had to disable my sata native. I can dual boot but on my xp its seem I'm missing alot of drives. I have no internet or sound,
Originally I had a small solid-state hard drive on this set up. I added a non-solid-state hard drive later. Recently, my solid-state drive, the C Dr., became too full to upgrade certain software programs such as Dragon NaturallySpeaking. I purchased a second solid-state hard drive.I "mirrored" that second solid-state hard drive. To make sure that Windows was operating appropriately, I rebooted and hit F10. I then showed the new solid-state hard drive. Everything booted perfectly and the new solid-state hard drive was noted as the C Dr.When I rebooted into bios to change the hard drive boot order so that the new second solid-state hard drive would be the first in the priority, when I highlighted it and exited from it,it still showed the original solid-state hard drive as the first hard drive.I have never had this problem before. I now have to go into F10 every time I boot into my computer and highlight the new solid-state hard drive.
I have a M2010 running Windows 7 ultimate using raid. I was wondering if I put in a hd in the secondary spot if I could add XP Pro and dual boot. I have some things that work better under XP. I put my old laptop drive in and set the bios raid to auto detect/ata. It booted to 7 and installed drive E:. I didn't change any Matrix software settings so it's a raid/non raid setup.
I know at this point it's tricky and i should have done it before installing Windows 7 however...My new physical primary drive now has Windows 7 pro running exclusively the whole partition (cI'd like to add the drive that had XP pro running on the same PC.i'd like to get this running as a duel boot without corrupting the XP drive.
1st. Installed XP on IDE drive, 2nd. installed a Sata drive, installed Windows 7 on that drive, want to remove the IDE drive, is it as simple as disconnecting the XP drive and do a startup repair, or is there going to be an issue with the XP drive being the Active drive, will startup repair make the Sata drive the Active drive?
i have two hard drives:A 250gb and a 1TBWhen I installed windows I chose the 1TB, but just left my other in there as it had some files I wanted on it. Now when I try to remove the 250gb drive, windows will not boot up.I tried marking the 250gb drive as inactive, but then during boot up it would say bootmgr is missing, so i had to use the installation disk then mark as active again.
I just want to delete the MBR on both my hard drives. Why? Because I want to. I'm going to delete my MBD and then I'm going to do a quick format of both of my whole hard drives. That's all I want to do.Will not give a clear direct answer to HOW THE @&$* DO I DELETE MY MASTER BOOT RECORD.I DONT HAVE FDISK. I DONT KNOW WHERE TO DOWNLOAD FDISK! I TRIED FDISK COMMANDS ON A COMMAND PROMPT - NOT RECOGNIZED!f anyone here can just tell me in the most simple way how to delete the master boot record on both hard drives...I can't believe there is no utility to do this...should be a utility called "Delete MBR" in my honest opinion.
I just have a question regarding installation of Windows 7 to dual boot with XP.
Am planning on doing a clean install on two new SATA hard drives. Will first attach one drive and partition and format it when I install XP.
Should I then go ahead and attach the second drive and partition and format it using XP before I start my installation of Windows 7?
Or, would it be better to attach the second drive and then partition and format it when I install Windows 7? Am thinking that the second approach would be better. By the way, this forum is a great resource.
I want to install 7 on a separate hard drive to see how it works & work indepenantly on it's own system. How can I if at all make it so when I am booting up I can toggle in between 7 & xp startups.
i have xp home 32 bit as my OS now and i have another hard drive installed and ready to install win 7 64 bit on to. can i do this with xp running or should i disconnect the HD with xp on it, then when i start the computer it won't see any OS and then i could boot from the win7 dvd and do a clean installl and then re=connect the HD with xp on it.
then when i start computer i should get the choice of which one to boot from or is this not the way to do it?? i want the OS's on separate HD's for now as i am sure that not everything that i want to run will work on the 64 bit win7 until i can afford to get all the programs i use to work on win7.
I currently have windows 7 ultimate in a Dell Gx270 P4 2.6ghz I know its old. And i want to Install Windows XP in another hard drive i have, but how do i make both hard drives boot, so i can select which one i want to boot.
I'm doing this because XP mode doesn't work in this computer. And i don't want to partition.
Most information i find in google requires partitioning and i don't want that.
If you know how please post it, or post the Links where i can find it.
I was trying to reclaim some unallocated space on the drive and in the process seem to have lost boot manager, so it won't load Windows. If I put the disc in, it's not able to automatically able to repair because it says the repair disc I'm using is not compatible with the OS I have installed. This is the same disc I used to install Win 7 in the first place. Tried using cmd prompt to reload boot manager manually,and it completes the operation successfully but still says bootmgr is missing at start up.What's scaring me is that if I try to just install Win 7 again (onto the unallocated space), the hard drive just turns off and the hdd light comes on solid. This is when I choose 'Install Now' from the opening screen before selecting partitions etc. I'm typing this post from a spare hdd. The only thing I can think off at this point is the get an enclosure and recover my files; then wipe the hdd in question and reinstall Win 7.
Method 1: Message states a fix was made.Root cause found: The partition table does not have a valid System Partition.
Repair action: Partition table repair Result: Completed successfully. Error code = 0x0 However, problem persists after reboot. The wizard indicated that multiple reboots may be necessary, but the wizard does not restart after reboot.
Method 2: Attempted to use Bootrec.exe /FixMbrMessage: The operation completed successfully.
Attempted to use Bootrec.exe /FixBoot Message: Element not found. Attempted to use Bootrec.exe /RebuildBcd Message: Element not found.
Attempted to export and delete the BCD.The command bcdedit /export C:BCD_Backup returned:The store export operation has failed.The requested system device cannot be found.Method 3: When I attempt a system restore, it errors with: To use System Restore, you must specify which Windows installation to restore.When I view the System Recovery Options dialog box, no Windows installation drives are listed.In addition, when I view the C: drive in the DOS window (my Windows installation drive), that drive lists as empty.
I set it up so that I could access my E: drive from either the windows or ubuntu operating system. It has worked perfectly so far (about 6 months). But, here is the problem:For some reason as the share drive (my E: drive / sda3) grows Windows thinks that the windows system drive (sda2/c:drive) is also growing. So that now I have a low storage warning stating that there is only 8.76 GB of free space left on my 99 GB C: drive. When, in reality, there should be about 77 GB of free space. I've made hidden files/folders viewable and downloaded treesizefree so I know what should be on the drive. The Treesizefree output shows the expected 22 GB of space but also shows only 9 GB of free space. So, the missing space is nearly exactly the size of my shared drive (sda3/E:drive). So somehow, I think the windows OS is double counting my shared E: drive against my C: drive.
somehow my hard disk partition became dynamic. i formatted system and insttaled windows 7 ultimate in the dynamic disk partition. from then onwards system is not booting. only black screen with cursor on the upper left corner of the black screen.
if i am not wrong windows 7 cannot boot with dynamic disk. i will have to go to the disk management and after conversion of dynamic disk to basic disk with deleting all the volumes (data). it is possible to boot with windows 7.
but system is not booting...not opening..so i cannot go to disk management.
hrad disk is showing some partitions with system reserved. except system reserved all the partitions are shwoing dynamic. and in only one partition formatting option and installing OS option is coming while i booting system with OS DVD.
reinstalltion through OS DVD is possble by booting through OS DVD. but in advanced option repartition option is not coming. the one partition in which i installed OS previously, only in that formatting option is coming. in other partition neither formating option is coming nor extend.
I have a Dell Inspiron 1545 laptop. I recently developed hard drive trouble and have had to order a replacement.Instead of installing Windows 7 all over again, with all the drivers, etc., I want to clone my existing hard drive to the new one.I intend to connect one of the hard drives to my system via a USB SATA cable with the other drive connected inside my system.
make a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?
I have a windows 7 64bit laptop and a window vista 64bit laptop.
I seem to be unable to view some of the videos on the windows 7 laptop but able to view those same videos on vista laptop. the error is normally "200, Stream not found, NetStream.Play.StreamNotFound, clip". Is it a settings problem as both of my laptops are installed with the same version of flash players.
I have tried to uninstall the flash player and re-install the flash player but the error still persist.
one day when i was working with my laptop suddenly everythng i mean pictures everythng changed as photo negative colors...i restarted my system...n after that a black screen came on my desktop..i am able to change the desktop and also i am able to perform all d operations but the thng is like i can't view my desktop
I have to hard drives on my computer one is fr 300 GB n the other is for 500 GB and both were been detected never had problem in last 8 mnths , but for last 3 days my computer does not detect the 500GB hard drive. Aticipating fr your response.
I am using Windows 7 Ultimate and I also have IE 9. I go to news websites and I am unble to view the video feeds from their websites. Is this possibly an intenet option setting that I need to adjust?
