I read the many articles with relation to the above error - didn't come with a win7 disk just the drivers disk. the rebuild command didn't work any other suggestions how to restart pc?
View 5 Replies
i did every thing but still it won't work.not even with the reinstall cd-dvdhow do i do that
View 1 Replies View Relatedi am a newbie as far as computer hardware is concerned. after struggling for days to install windows 7 onto my new pc which came without and 0s installed,[code] it list the 465 which i use for storage but the 30gb where the 0s is installed dosent show. surely if the hard drive had a problem the 465gb wouldnt show as it an te 30gb makes up te 500gb? i tried selecting the 465gb volume enter and then exiting diskpart then it says BOOT MGR IS MISSING PRESS CTRL +ALT+DEL TO RESTART..so basiclly i have read almost all forums concerning this and followed most of the steps listed above for however mine says boot manager missing or corrupt, wen ever i run start up repair its says start up repair cannot repair this computer automatically.
View 9 Replies View RelatedI have a brand new Sony SVT13112FXS - hard drive is a hybrid of 500 GB HDD and 32 GB SDD.I was attempting to reformat it to get all of the anti-virus stuff off, except when I tried to reformat no disks were shown in the reformat tool. It asked for drivers, so I assumed I'd need to install the SATA/chipset drivers. I downloaded them from the Sony website but it wouldn't allow me to install them (from a flash drive). Specifically the error is "No drives were found. Click load driver to provide a mass storage driver for installation."In my troubleshooting I (stupidly) marked the wrong partition as active and got the dreaded "bootmgr is missing" upon restart. I attempted to repair using the windows 7 disk as a recovery tool and selected "startup repair" 3 times, but it still does not work.I am able to get into command prompt and I am assuming I can inactivate the (wrong) active partition there. However, when I go into DISKPART and type "list disk", all that shows up is my flash drive that I am attempting to install windows from - the computers hard drive does NOT show up here.I will also happily completely reformat instead of repairing, but I cannot do that since I can't get the disks to show up in the reformat tool.
View 7 Replies View Relatedbootmgr is missing How do i reset laptop with out boot disk or usb
View 4 Replies View Relatedneed driver for laptop dell inspiron 1525
View 1 Replies View Relatedhow to unlock hdd on inspirion dell laptop windows 7.lost code service tag is 8PQ3FV1
View 2 Replies View Relatedmy dell inspirion n5010 lPTOP AUTOMaTICALLY SHUT down after few seconds after power on.
View 2 Replies View Relatedi want a internet driver for window 7
View 1 Replies View RelatedI have a dell inspirion 1505. I just upgraded my Ram and my hard drive. My computer came with a 80GB hard drive, but when i tried to replace it with a new 500GB hard drive my computer still only recognizes it as a 80GB. During the windows 7 upgrade where i would normally be able to clear my new hard drive and specify my new drives it still only showed 80 GB.
i have talked to dell twice now and i get conflicting answers each time. The first person said that my computer would only support 120GB and the second said it would only support 100GB. I have a hard time believing this because my computer came with a SATA harddrive, which shouldnt limit me.. At least i thought.
i am having windows 7 64 bit operating system.Earlier i was using windows 7 32 bit operating system but when i changed my operating system it lead to formatting of the recovery drive on my laptop.Now i am not able to backup my data on my laptop.so kindly suggest a way through which i can recover the factory image of my laptop.
View 3 Replies View RelatedUpdate laptop dell inspirion 5050 webcam driver?
View 1 Replies View RelatedDownload driver for universal serial bus(usb) controller for dell inspirion n 5050
View 1 Replies View RelatedWhere can I find a sound driver for my Dell Inspirion 6000 with Windows 7 Ultimate? I have tried the dell website and downloaded sigmatel drivers but it still will not play any sound. What Can I do?
View 2 Replies View RelatedI have a HP Mini netbook which is just out of warranty. When I start computer i get a black screen with the message bootmgr missing.I have tried recovering system using start up recovery, etc, etc but still end up at same screen.I can get into the command prompt screen but have no idea what to do next.. have found on the web is for laptops/pcs with a disc drive, mine doesnt have one.I am not an expert on computers so
View 1 Replies View RelatedI am kind of being forced to hand over my Dell XPS 1530 to my mother because she messed up her laptop. (Sad... I love this laptop)
I will be getting a Dell Mini 10 as a "replacement". I installed Windows 7 on my Dell XPS 1530 and I am LOVING it like pretty much everyone else.
Basically to cut to the chase I wanted to know if Windows 7 will work on the Dell Mini 10. The Dell chat lady told me that it can only handle XP but thats makes no sense to me seeing as how the same innards are in the Mini 12 and that comes with Vista. I figure she was just telling me that because she had to.
So I am coming to you guy to see if someone can let me know if Windows 7 will function completely on the Mini 10. In order to help you guys help me out I will post the specs of the Mini 10 here...
Intel Atom Z530 (1.60GHz/533MHz FSB/512K L2Cache)
Intel Integrated Graphics Media Accelerator 500
120GB SATA HDD 2.5 inch 5400RPM
2GB 533MHz DDR2 RAM
So like I said... I want to know if Windows 7 will work smoothly on the system. I want to keep Aero too because I am a stickler for aesthetics and I love the transparency. Not to mention the actually Aero functionality features are awesome as well.
I bought a Mini 10 Dell netbook during the summer. I was pretty excited to see how a netbook with comparable(sightly better) computing power to my 5 year old 700m. The size and the price were nice.
I decided to go with linux b/c I had some experience with it and was somewhat fond of linux. For freeware OS, the overall price was the same. I had a lot of issues with the touch pad and the mouse buttons. Overall performance seemed lower than it should have been. I tried different distributions, but the dell distribution was the best(mediocre). I had a lot of buyers remorse and was a little mad at Dell for selling a product that maybe wasn't ready.
I saw online that Microsoft had a student discount for Windows 7 Professional. So I got that and made the necessary changes to upgrade.
So far, everything works great! The touch pad and buttons work perfect. It is now possible to click and drag stuff. Overall performance appears to be up as well. And it is, of course, visually pleasing. Flash video works a billion times better too.
I posted this for anyone that pondering trying Windows 7 on their mini 10, but might feel uneasy. It was definitely the best $29 I have ever spent. My machine is now everything I was expecting it to be before I bought it.
I did a windows 7 clean install on my HP Mini 210 4051 nr as part of creating a dual boot with Ubuntu. In Linux the internet works fine, but in Windows 7 it does not. In the device manager I see yellow flags over the ethernet and network controllers. Code 28 (My model does have an ethernet port).
Because the machine cannot connect, I downloaded all the related drivers (everything from the network tab) from the HP website for my model with another computer and then put them all in a folder on the Mini's desktop via USB. When I try to install the drivers through the device manager, and direct it to that folder, it says it finds nothing usable.
Here are the IDs
Ethernet Controller
PCIVEN_10EC&DEV_8136&SUBSYS_338D103C&REV_05
Network Controller
PCIVEN_1814&DEV_5390&SUBSYS_163610C&REV_00
I have a Dell Inspiron Mini 1018 and it no longer boots fully into windows. It goes through the prompt screen at start-up normally and goes to the next screen, which is a black screen with a green loading bar and has the Microsoft corporation copyright below it.Normally it will boot into the normal windows operating system after this screen, however it just keeps restarting and cycling through these two screens indefinitely.I have already disassembled the computer and cleaned it out and looked for any loose and/broken components but saw neither. Also, I have already re-imaged the computer, setting it back to the original factory state. Neither of these has seemed to help the problem at all and it continues.
View 1 Replies View RelatedMy dell Inspiron mini 1018 crashed so I got a new hitachi HD and installed it, when I put the dell OS CD (win 7 starter x32) in the external DVD/CD drive it tells me no OS found and can't see the CD, I changed the boot order to boot from the cd but still nothing, I put in a windows xp CD and it all boots up as it should and will install. I even FDiSK the HD with win 98. Is it the DVD/cd drive? I just dont get it
View 4 Replies View Relatedtried latest dell driver but it just tells me to turn on with fn f2 which i do but nothing happens.
View 6 Replies View Relatedmy girlfriend bought her mum a Dell Inspiron Mini 1011 and Windows 7 Home Premium pack
windows 7 came with a Product Key because the Dell notebook does not come with a CD Drive and the steps are
1.Click the start button
2. Search "windows Anytime Upgrade"
3. Click Windows anytime upgrade key then click enter an upgrade key
4. Blah blah blah.......
but i can only find the "windows anytime upgrade" on my vista laptop and don't know how to upgrade hers to windows 7.
is there some way you can get the windows anytime upgrade on xp ?
or would i need to install windows 7 from a torrent and just use the product key wee have got ?
I have a dell mini 1018 which got dropped and now has HDD issues. This happened in july 2012. I tried recovering my files and it didn't work. SO i put it in the cupboard and was going to send it away to recover my files but since it was a hardware fault the thought of �300 for physical recovery made me a little sick.Anyway, thought i'd give it another go and luckly i have managed to recover all my files. I dont care about my programs as it was fairly new and not much on there.The netbook contains 1 HDD with 2 PartitionsThe netbook doesn't have a cd/dvd drive and instead uses a recovery partition. I have brought the exact same HDD and am trying to image the drive but i am getting CRC errors.My question is if i manage to image both the partitions and the recovery partition has no CRC erros then i should be able to use the recovery to reset back to factory settings on the new HDD ?Im using DriveImageXML to backup each partition but how would i loading them onto the new HDD, would i have to partition the drive first ? i guess it would have to match the same setup as the original.
View 14 Replies View RelatedI have a Dell inspriron mini 1012. that I need to reinatall Win 7. It has No CD rom drive.
View 1 Replies View RelatedI have a Dell mini that needed a fresh installation. Installing from the factory restore partition did not solve the inability to run updates.So I have a Windows 7 installation disk and I used it to wipe the disk and install Windows 7 Starter again. I had pulled the product key from the previous installation that was fresh from the restore partition.And activation failed with code 0xC004E003.It looks like there is no more phone in. So I ran the WGA tool and here is its output. [code]
View 9 Replies View RelatedBypassing windows 7 password ON dell inspiron mini 10
View 3 Replies View Relatedprevious owner died. Did not leave administrator password behind.i understand I will lose all the photos, etc. That is fine
View 3 Replies View RelatedHas anyone found er version than 4.100.15.61?
View 5 Replies View RelatedI have a Dell Inspiron Mini 1011. It has installed on it Windows 7 Starter 32 bit. I'm trying to do a complete system reset on it to wipe everything and bring it back to factory settings. The computer doesn't have a cd/dvd drive. I don't have an external cd/dvd drive. The computer doesn't have a restore partition.From what I gather I need to download or create the iso for Windows 7 Starter.I can't find this iso. I can find the iso for home premium and professional, but not for starter.
View 7 Replies View Relatedwhat option to be used to come back in normal my mini dell inspiron 1018,,it was accidentally unplagged and cannot restart and booth again..what option should be use?
View 1 Replies View RelatedAlready Downloaded Network Driver for Dell Inspiron Mini using Windows 7.
View 1 Replies View Related
