Return To Factory Settings Dell Inspiron Mini 1011?
Jul 25, 2012
I have a Dell Inspiron Mini 1011. It has installed on it Windows 7 Starter 32 bit. I'm trying to do a complete system reset on it to wipe everything and bring it back to factory settings. The computer doesn't have a cd/dvd drive. I don't have an external cd/dvd drive. The computer doesn't have a restore partition.From what I gather I need to download or create the iso for Windows 7 Starter.I can't find this iso. I can find the iso for home premium and professional, but not for starter.
my girlfriend bought her mum a Dell Inspiron Mini 1011 and Windows 7 Home Premium pack
windows 7 came with a Product Key because the Dell notebook does not come with a CD Drive and the steps are
1.Click the start button 2. Search "windows Anytime Upgrade" 3. Click Windows anytime upgrade key then click enter an upgrade key 4. Blah blah blah.......
but i can only find the "windows anytime upgrade" on my vista laptop and don't know how to upgrade hers to windows 7.
is there some way you can get the windows anytime upgrade on xp ?
or would i need to install windows 7 from a torrent and just use the product key wee have got ?
Do I need the windows product key even though the laptop was preinstalled? Basically the product key has a few numbers and letters missing from the back of the laptop and there seem to no way to retrieve it.
I have a dell mini 1018 which got dropped and now has HDD issues. This happened in july 2012. I tried recovering my files and it didn't work. SO i put it in the cupboard and was going to send it away to recover my files but since it was a hardware fault the thought of �300 for physical recovery made me a little sick.Anyway, thought i'd give it another go and luckly i have managed to recover all my files. I dont care about my programs as it was fairly new and not much on there.The netbook contains 1 HDD with 2 PartitionsThe netbook doesn't have a cd/dvd drive and instead uses a recovery partition. I have brought the exact same HDD and am trying to image the drive but i am getting CRC errors.My question is if i manage to image both the partitions and the recovery partition has no CRC erros then i should be able to use the recovery to reset back to factory settings on the new HDD ?Im using DriveImageXML to backup each partition but how would i loading them onto the new HDD, would i have to partition the drive first ? i guess it would have to match the same setup as the original.
what option to be used to come back in normal my mini dell inspiron 1018,,it was accidentally unplagged and cannot restart and booth again..what option should be use?
I've recently purchased a Dell Inspiron 620 for my mum and dad and in the past when the system is running slow or encounters problems I back up everything on to an external hard drive and run a factory restore for them. However i'm struggling to establish how to run a factory restore on the new computer? I've pressed F8 when the machine boots up and selected 'Repair your computer' but the only recovery options I have are shown in the image below:
Looking at the 'Disk Management' page I can see a partition called 'RECOVERY' so i'm assuming that I can do a factory restore? One thing that is concerning me though is that Dell have provided a Windows 7 DVD and Drivers and Utilities DVD so i'm worried that i'm expected to reformat the hard drive and install from scratch?
For my dell 1564...i I am looking to restore it. I read previous posts. I get to "system recovery options" and tried the first 3 options for restore/ repair, but nothing..its all restore to previous point, which apparently I dont have even though I made them, and dell cds dont seem to want to load up, in safe mode, reg, hitting f12, f2, f8, ctrl f11 and so on..
She asked me to restore her computer to factory settings. She is not at all tech savvy, so I know for a fact she did not do anything to mess it up. It was running fine, but she just wanted to clean it out and bring it back to like new. She pretty much only uses her computer for school papers and email. I have done factory recovery on many computers at this point and I have never had any problems at all until now.
First thing I did was hook up my external hard drive and saved all of her documents and pictures. I then restarted the computer and pressed F8 and then clicked on repair my computer. It took me to datasafe backup and restore. I went as far as to restore the factory image. I chose not to save any files and to restore it to new again. It completed as normal and I clicked restart.When it restarts, a list of files pops up and then it says "Setup is preparing your computer for first use." It also shows another list of files that seem to be loading as well as it tells me that it is booting in safemode. Next thing it says is that "Setup will continue after restarting your computer". It then continues to restart and perform this boot loop until I turn it off.
I tried to repair the computer and it would fail saying it was offline. So, I plugged the hard drive into an adapter to hook it to my other computer. I opened the disk manager. I saw that the recovery partition was not active like it is on my other hard drives. I also see that for some reason it has a tiny partition that is labeled fat. On my other hard drives it is labeled oem partition. Not sure if this makes a difference or not, but thought it was worth mentioning. Also, when I choose to explore the recovery partition, it says the recovery folder is empty, however the properties say it is nearly full with many files. On my other hard drives I can not access that folder at all. I also am not sure if this matters or not, but didn't want to let anything I am doing go unnoticed.
i need to restore my Acer to factory settings, what i need to know is simple, If i select "Restore Your Computer To Factory Condition", do i need to have a windows 7 disc to finish it???? or to reinstall the OS? or does it do that all on its own? because the laptop came with it pre-installed.
I just bought an HP Mini (200-4218tu) last Sunday. Now, when I tried to partition C, it was cut in half. However when I tried to format the unallocated space, it won't allow me. It said it doesn't support what I did. This case, the partition for HP RECOVERY and HP TOOLS were still intact. On boot-up, I can still press F11 for the HP recovery. Now, relying on the partition recovery, I decided to wipe C and install a trial Windows 7 ultimate just to be able to partition the drive. Success! I was able to create a partition but the HP TOOLS got wiped out too. I did a research that the HDD supports only 4 partitions. And the drivers downloadable via HP site were not useful at all to be able to override the OS installation. Thus far, when I tried to press F11 for the recovery, it prompted an error that the "BOOT" thing was not found and I need the recovery disk. Even upon OS set-up, I can no longer delete C. And bring it back to its 400Gb clean space.
My daughter had received a Dell Inspiron mini with Windows 7 starter preloaded. At some point it started crashing when attempting to connnect to our network (in home) to get on internet. I also noticed it would not run windows updates. After some research discovered possible virus. I did run several spyware, malware programs and was able to remove fake trojans. Everything seemed to be going well until I rebooted. The system now boots to system recovery options. Knowing there is nothing really on the computer to loose, I have tried ever option. When it runs startup repair, it is unable to repair the problem. I have tryed system restore, I picked a point previous to problems start, it said it restored it but it still boots back to system recovery options. I tried the image recover and factory image recovery. If i go to command prompt I even started the setup.exe and was going to reinstall but it says it needs some drivers and for me to insert dvd/cd. I dont have one since it came preinstalled, or at least I have never seen one with this machine. I can view in dos prompt everything on the machine. Every time I reboot it goes back in to repair cycle with no repair.
i have tried to do a factory reset on afriends hp mini 110. All seemed to be going to plan until i got the message "set up is preparing your account for the 1st time" The comp then goes to the welcome page before displaying the message " windows could not complete the installation.to install windows on this computer restart theinstallation"I have tried everything over the last couple of days but now think there may be a problem with the hard drive.
Having a little trouble restoring my computer to factory settings. I dont know why but I cant seem to just do it through the advanced menu because it says i dont have a restore point. Does anyone else know how to Restore my computer totally without having to buy a new operating system, Or even Just using a old one.
My problem is with my hp laptop running windows vista. laptop is hp pavilion dv6225us. OS was upgraded to windows 7 ultimate. was getting messages saying this version of windows 7 was not genuine so i tried to restore my laptop to factory settings. this failed. do not recovery disc; could not get recovery manager by pressing f11 at boot up. now at boot up i receive this message 'remove discs or media; press any key to restart. pressing any key nothing happens. how can i get to recovery partition to restore to factory settings.
I recently had a virus/malware attack on my system, removed it, but the system is damaged (Security center & updates cant be started etc) . I want to restore the comp using the acer feature "restore to factory settings". But I wonder, must I have a Win7-installation CD after the restore?? Because the computer came with preinstalled Windows 7 when I bought it. Keep in mind that it's a factory settings restore not a complete format c (i think) I've done a backup on hardrive "D" of my current system in case of anything going wrong. If a Cd is required, could you tell me another way to format the comp without buying the CD? My security center is damaged, so restore to point doesnt work either. If you got any solutions to how to start security center except setting it to "automatic" in services.msc (Since this doesnt work), please post 'em.
I have a dell Inspiron n7010 and im trying to reformat my computer. I backed up all my personal files into an external hdd. However when I try to restore my laptop to its factory settings, I get stuck. Upon booting up my computer I press f8 to get into the advanced boot menu. From there I select system repair but after selecting that, it always gets stuck at windows is loading files. It doesn't look my computer is loading anything either and it doesn't make sounds as of it were.
For a variety of reasons, I want to do a clean install on my laptop, which is a Dell Studio XPS with Windows 7. I don't have any Windows disks (it's 2 years old and I'm fairly sure I wasn't provided any), so I'm trying to do it through advanced boot options. When I hit F8 during startup and select repair, I am shown the screen "Windows is loading files..." and then the system starts as usual, rather than giving me options for a fresh install, which the description (and every set of instructions I've seen) would suggest.
I am currently running an Asus Laptop with Windows 7 Home Premium 64bit and I want to know how to restore the computer to just factory settings. The computer got ridiculously slow, so I figured I'd take this route. I don't have an installation disc, nor do I have a recovery disc. I bought the laptop at Best Buy.
I want to restore my laptop to factory settings, but I don't have a Windows 7 installation CD. I was just wondering if, when I restore to factory settings (since I don't have another point to restore to), will my laptop be wiped completely? Since I don't have any installation CDs or anything, I don't want to restore it to factory settings if it'll wipe it completely.will it wipe my laptop blank or restore it to the point it was at when I started it following purchasing it (all the basic programs and such already installed)?
So im looking to restore my PC to its factory settings so i saw from a video that says all i have to do is go to, Control panel->System and security->Backup And Restore->Recover system settings or your computer->Advanced recovery methods->Reinstall Windows (requires Winodows installation disc) so yeah, will this work? im pretty sure the disc i have that came with my comp is the right disc, on the disc it says"microsoft windows 7 Reinstallation DVD", Windows 7 Home Premium 64-bit.
let me know if this is the right disc and if this is the right way to reset to factory settings that would be super awesome!!!!
there's something wrong with my HP Windows.o sound for instancehow can i restore the factory settings and start over?will this destroy data I've worked on. [i have backed up stuff]
