I just bought an HP Mini (200-4218tu) last Sunday. Now, when I tried to partition C, it was cut in half. However when I tried to format the unallocated space, it won't allow me. It said it doesn't support what I did. This case, the partition for HP RECOVERY and HP TOOLS were still intact. On boot-up, I can still press F11 for the HP recovery. Now, relying on the partition recovery, I decided to wipe C and install a trial Windows 7 ultimate just to be able to partition the drive. Success! I was able to create a partition but the HP TOOLS got wiped out too. I did a research that the HDD supports only 4 partitions. And the drivers downloadable via HP site were not useful at all to be able to override the OS installation. Thus far, when I tried to press F11 for the recovery, it prompted an error that the "BOOT" thing was not found and I need the recovery disk. Even upon OS set-up, I can no longer delete C. And bring it back to its 400Gb clean space.
I remember a while back I got a BSOD, but I fixed it by reformatting my C drive, this didn't remove my OS or touch anything on my D drive however. I would now like to do the same, not because I have a problem but because my computer is becoming sluggish and I haven't reformatted for a long time. However, searching up how to reformat the C drive, without removing this OS seems literally impossible, every post I see just says the following: get your OS disk. Despite this, I managed to get the C drive back to factory defaults while keeping the OS, all my drivers for my hardware (graphics card, sound card etc.) intact. I would like to do the same again, if it is actually possible. This was originally a box PC so I don't have any CDs except for the one for my new graphics card which I replaced a faulty one with.
I have Toshiba Satellite laptop and it was very sluggish lately so I restored it to factory defaults.After restoration, I updated OS (Windows 7 Home Premium) and then installed programs I needed. But I am noticing that many of these programs, like Skype, Winamp, Teracopy etc. crash either at start or during the process. All these programs worked flawlessly before restoration.
it has no recovery ability, the downloaded utility HP recommends keep telling me I am missing .dll files and other errors. can't make backup discs because the utility is not on the computer and the downloaded utility is not doing the job. how to contact HP with no success.
I restored my friend's HP Vista desktop to factory defaults. When I attempted the first round of 91 Windows Updates, 50 of them came back as Failed to Install. I thought maybe the Recovery went bad, so I re-did the recovery to factory defaults. I was able to install half of the updates, (I decided to do half at a time), but now it is locking up at random times. I ran the Windows Memory Diagnostics, found no errors. I ran chkdsk /r from a command prompt, it found no errors. Any ideas where to look next? I'm thinking to open it up and look for swelled up capacitors
I have an Inspiron N4010, and one night, it worked perfectly, and the next morning it wouldn't start. So I had to restore my PC to the factory image. Now, many programs on my computer crash only minutes, or even seconds, after executing them. I do not understand why. I have not deleted any files, I have not messed with anything, and I have kept my PC up to date, as well as protected. There is no reason for why my computer runs the way it does.
EDIT: This is added by moderator. The problem system has been "restored" to factory defaults, so you can skip to post # 11 and be missing only some history. I have also at this time moved the thread from Networking to Windows 7.Okay, this is my boyfriend's laptop. He's left it with me to see if I can fix it. I'm at work right now, and it is at home, so I can't try anything until I get home tonight.Here'e the situation, as best I can tell:He has 2 laptops...one is old, and connects fine, the other is probably 6 months old - a Dell - Windows 7, and this is the one that is having problems. The other laptop has no problem with its connection - it is just the Dell laptop. He brought it over to my house last night, and it is doing the same thing. It finds and connects to my network, but it states that it is a "limited access" connection, which essentially means you have no internet connection (apparently).
So here is what I have found out. For one, his laptop came with few months subscription to McAfee...and apparently that is now expired. He's never renewed it. I did put MalwareBytes on there for him, when he got the thing, but I don't think he runs it unless he thinks there is a problem. I've told him to keep it updated, but I guess he thinks I can fix it if there is a problem. Again... (Once we get this fixed, he WILL keep this stuff current..darn it.) Anyway...he said he kept getting some popups - the ones that ask if you want to "allow a program to make a change to your computer"...and he always said no. I think he got several of those in one night. He ran the MalwareBytes, and it found and quarantined some malware (I don't know what sort of things - I was not there when he ran it) and then when he tried to access his network again, he got the "limited access" thing. So...something has happened, just on that laptop. I messed around with it a little last night, but I couldn't get anything working.
We have a family computer with three main accounts; admin, josh, becky. "josh" has been reset but the other two accounts; "admin" and "becky" are the same. I have never seen this happen and I have no idea how to recover the files on Josh's account. How can I recov the account before everything was deleted?
Dell is not helping me at all, this is the 3rd time this has happened on the same laptop and idk what to do I cant repair it, it says
Problem Event Name: StartupRepairOffline Problem Signature 01: o.o.o.o Problem Signature 02: o.o.o.o Problem Signature 03: unknown Problem Signature 04: o Problem Signature 05: unknown Problem Signature 06: 1 Problem Signature 07: unknown OS Version: 6.1.7600.2.0.0.256.1 Locale ID:1033
I am slowly transferring from XP on an old PC to Windows 7 Pro. on a new one. The new one has a small solid state drive (SSD) for OS and programs and a large disk for data. Today I ran a Win 7 system restore to get back to a clean situation and found that the desktop had been re-set to default values. Several icons have gone, the mouse is double click instead of single, and so on. An icon-restore program has gone (but is still in the Download folder). And now, every time I re-boot I get a message that a temporary profile has been loaded - and to get back to 'my' desktop I must log off and re-boot. Which does nothing, apart from removing the gadgets and resetting everything to default again.Yes, I know I shouldn't be using System Restore with an SSD, but that is not because of any software restriction it is to stop the SSD wearing out. and is only a temporary measure whilst I load software.
I inadvertently disassociated all my programs from their default. A security company uninstalled my internet explorer and I can not get it back. I am now using Firefox, but all Firefox will not open them
I have a Dell Inspiron Mini 1011. It has installed on it Windows 7 Starter 32 bit. I'm trying to do a complete system reset on it to wipe everything and bring it back to factory settings. The computer doesn't have a cd/dvd drive. I don't have an external cd/dvd drive. The computer doesn't have a restore partition.From what I gather I need to download or create the iso for Windows 7 Starter.I can't find this iso. I can find the iso for home premium and professional, but not for starter.
My daughter had received a Dell Inspiron mini with Windows 7 starter preloaded. At some point it started crashing when attempting to connnect to our network (in home) to get on internet. I also noticed it would not run windows updates. After some research discovered possible virus. I did run several spyware, malware programs and was able to remove fake trojans. Everything seemed to be going well until I rebooted. The system now boots to system recovery options. Knowing there is nothing really on the computer to loose, I have tried ever option. When it runs startup repair, it is unable to repair the problem. I have tryed system restore, I picked a point previous to problems start, it said it restored it but it still boots back to system recovery options. I tried the image recover and factory image recovery. If i go to command prompt I even started the setup.exe and was going to reinstall but it says it needs some drivers and for me to insert dvd/cd. I dont have one since it came preinstalled, or at least I have never seen one with this machine. I can view in dos prompt everything on the machine. Every time I reboot it goes back in to repair cycle with no repair.
My notebook (HP Envy 14) had been attacked by malware, and after eventually destroying the virus, I've realized that the system files/programs were severely damaged. For instance, when I attempt to open Internet Explorer or Firefox, a window appears, asking me to browse for a program to open the "unrecognized" Internet Explorer with... and this process applies to most of my programs, such as Microsoft Word (in order to open Word, I must indirectly open a word file document, it's impossible to simply click on Word from the start menu). So, that's why I decided to return my notebook to its original state, using the System Restore factory option. However, when I attempt to run system restore (after saving all of my important files onto an external hard disk), an error message comes up: "Error: Recovery Manager cannot run from the hard drive. Recovery Manager must be run using recovery media to perform a Factory Reset." What exactly is "recovery media" and why is this message appearing?
Having a little trouble restoring my computer to factory settings. I dont know why but I cant seem to just do it through the advanced menu because it says i dont have a restore point. Does anyone else know how to Restore my computer totally without having to buy a new operating system, Or even Just using a old one.
My problem is with my hp laptop running windows vista. laptop is hp pavilion dv6225us. OS was upgraded to windows 7 ultimate. was getting messages saying this version of windows 7 was not genuine so i tried to restore my laptop to factory settings. this failed. do not recovery disc; could not get recovery manager by pressing f11 at boot up. now at boot up i receive this message 'remove discs or media; press any key to restart. pressing any key nothing happens. how can i get to recovery partition to restore to factory settings.
I recently had a virus/malware attack on my system, removed it, but the system is damaged (Security center & updates cant be started etc) . I want to restore the comp using the acer feature "restore to factory settings". But I wonder, must I have a Win7-installation CD after the restore?? Because the computer came with preinstalled Windows 7 when I bought it. Keep in mind that it's a factory settings restore not a complete format c (i think) I've done a backup on hardrive "D" of my current system in case of anything going wrong. If a Cd is required, could you tell me another way to format the comp without buying the CD? My security center is damaged, so restore to point doesnt work either. If you got any solutions to how to start security center except setting it to "automatic" in services.msc (Since this doesnt work), please post 'em.
i was havin probs with my pc DELL isnpiron 17R ,,it was about missing of some storage drivers ,, i contacted a dell agent ; after he viewed the device manger and trying to reinstall them he couldn't and he told me that i've ghost or something in my registery and i need to do a restore to factory settings..i tried to shut down pc and turn it on again then i pushed the F8 button and i choosed " Repair Your Computer " and then i got " windows loading files " ,, stuck on it ,,,i tried to restart the pc and do it again but nothing i tried to remove battery and placed it again and retry but nothing i stucked on the same page.i used registry boost program on this site ,, after scan ,, i had a high damaged registery.
Okay, my computer is very clogged at the moment and I would like to do a complete restore, but I have some files that I need to keep. Is there a way I can do a complete restore but keep some of the files (no external hard drive).
I have a dell Inspiron n7010 and im trying to reformat my computer. I backed up all my personal files into an external hdd. However when I try to restore my laptop to its factory settings, I get stuck. Upon booting up my computer I press f8 to get into the advanced boot menu. From there I select system repair but after selecting that, it always gets stuck at windows is loading files. It doesn't look my computer is loading anything either and it doesn't make sounds as of it were.
For a variety of reasons, I want to do a clean install on my laptop, which is a Dell Studio XPS with Windows 7. I don't have any Windows disks (it's 2 years old and I'm fairly sure I wasn't provided any), so I'm trying to do it through advanced boot options. When I hit F8 during startup and select repair, I am shown the screen "Windows is loading files..." and then the system starts as usual, rather than giving me options for a fresh install, which the description (and every set of instructions I've seen) would suggest.
i have changed my hard disk on my dell inspiron 1440 but and i have install windows 7 ultimate x64, but when i activate my windows, my laptop does not boot. its probably about my bios since i have install a new hard disk and i need to restore my factory image
My computer has been slowly deteriorating the last few days. It first ran a system repair every time I started the computer and would then boot to the desktop, then it would just loop through the system repair screen over and over. I am thinking that my last option is to restore the computer to it's factory default since I have everything backed up on an external hard drive.
It was working great and I noticed that it would not recognize an external drive I was going to install some progs from, even though I can go in to Admin Tools and see it there, and then I tried taking it online and it says Windows Explorer not responding all the time, so I think the best bet at this point is to restore it back to out of the box condition.I just started tweaking on it, so it's not like I'll be losing much work.
So im looking to restore my PC to its factory settings so i saw from a video that says all i have to do is go to, Control panel->System and security->Backup And Restore->Recover system settings or your computer->Advanced recovery methods->Reinstall Windows (requires Winodows installation disc) so yeah, will this work? im pretty sure the disc i have that came with my comp is the right disc, on the disc it says"microsoft windows 7 Reinstallation DVD", Windows 7 Home Premium 64-bit.
let me know if this is the right disc and if this is the right way to reset to factory settings that would be super awesome!!!!
1st off, My user name is not a joke. I have a hp G72-B27CL Notebook that was purchased online from aGoodwill auction. The notebook looks brand new & in their listing for the auction they said it just needed a hard drive so I put my WD 500 GB hd in it & attempted to do a system recovery. It went through the whole process & ended with Welcome TO YOUR NEW HP COMPUTER, About a minute later it was showing Restoration Incomplete with the options to Retry or try to find out what the problem was, Well it would only allow me to try again, Which I did (actually 2 more times) Of course same results. Their is no recovery CD'S that came with the computer, However it does have the windows product key # on the back of it. This computer will not let me do anything else except keep trying to recover it. (Which is a total waste of time) Should I erase everything on that hard drive ? It really has nothing I care if I lose or not & how would I go about erasing the hard drive ? The computer I'm talking about wont let me do anything except what I have shared.
And I don't want to put the hard drive in another computer & mess up what ever computer I put it in. This really is a bummer because I felt I was getting a good deal + helping out a organization, So the bottom line is right now I have a pretty laptop that doesn't operate & I am currently down $232.00 + shipping cost. I truly apologize for the length of this post, But as I stated from the start I'm truly lost. Any suggestions & please remember you are replying back to someone that is truly lost, so if at all possible if you choose to respond. Talk in language I understand.
im trying to restore my X51 to its factory state so when the SYSTEM RECOVERY OPTIONS comes up there is no alienrespawn or Dell DataSafe Restore and Emergency Backup, Iv gave it a shot from alienrespawn app when i click on restore its says that it will restore to Orginal factory state so restart after that the SYSTEM RECOVERY.
