System Restore Has Re-set Defaults?

Dec 22, 2010

I am slowly transferring from XP on an old PC to Windows 7 Pro. on a new one. The new one has a small solid state drive (SSD) for OS and programs and a large disk for data. Today I ran a Win 7 system restore to get back to a clean situation and found that the desktop had been re-set to default values. Several icons have gone, the mouse is double click instead of single, and so on. An icon-restore program has gone (but is still in the Download folder). And now, every time I re-boot I get a message that a temporary profile has been loaded - and to get back to 'my' desktop I must log off and re-boot. Which does nothing, apart from removing the gadgets and resetting everything to default again.Yes, I know I shouldn't be using System Restore with an SSD, but that is not because of any software restriction it is to stop the SSD wearing out. and is only a temporary measure whilst I load software.

View 1 Replies


ADVERTISEMENT

Restore Defaults All Programs?

Apr 8, 2012

I inadvertently disassociated all my programs from their default. A security company uninstalled my internet explorer and I can not get it back. I am now using Firefox, but all Firefox will not open them

View 1 Replies View Related

How To Restore To Factory Defaults HP Mini?

Aug 16, 2012

I just bought an HP Mini (200-4218tu) last Sunday. Now, when I tried to partition C, it was cut in half. However when I tried to format the unallocated space, it won't allow me. It said it doesn't support what I did. This case, the partition for HP RECOVERY and HP TOOLS were still intact. On boot-up, I can still press F11 for the HP recovery. Now, relying on the partition recovery, I decided to wipe C and install a trial Windows 7 ultimate just to be able to partition the drive. Success! I was able to create a partition but the HP TOOLS got wiped out too. I did a research that the HDD supports only 4 partitions. And the drivers downloadable via HP site were not useful at all to be able to override the OS installation. Thus far, when I tried to press F11 for the recovery, it prompted an error that the "BOOT" thing was not found and I need the recovery disk. Even upon OS set-up, I can no longer delete C. And bring it back to its 400Gb clean space.

View 2 Replies View Related

Restore Computer To Factory Defaults?

Oct 3, 2012

I remember a while back I got a BSOD, but I fixed it by reformatting my C drive, this didn't remove my OS or touch anything on my D drive however. I would now like to do the same, not because I have a problem but because my computer is becoming sluggish and I haven't reformatted for a long time. However, searching up how to reformat the C drive, without removing this OS seems literally impossible, every post I see just says the following: get your OS disk. Despite this, I managed to get the C drive back to factory defaults while keeping the OS, all my drivers for my hardware (graphics card, sound card etc.) intact. I would like to do the same again, if it is actually possible. This was originally a box PC so I don't have any CDs except for the one for my new graphics card which I replaced a faulty one with.

View 3 Replies View Related

Many Programs Crash After OS Restore To Factory Defaults?

Jul 23, 2011

I have Toshiba Satellite laptop and it was very sluggish lately so I restored it to factory defaults.After restoration, I updated OS (Windows 7 Home Premium) and then installed programs I needed. But I am noticing that many of these programs, like Skype, Winamp, Teracopy etc. crash either at start or during the process. All these programs worked flawlessly before restoration.

View 12 Replies View Related

Restore Laptop To Factory Defaults - Hp 4330s

Jun 12, 2012

it has no recovery ability, the downloaded utility HP recommends keep telling me I am missing .dll files and other errors. can't make backup discs because the utility is not on the computer and the downloaded utility is not doing the job. how to contact HP with no success.

View 2 Replies View Related

System Restore Will Not Create A Restore Point Or Restore To A Previous Date & Time

Apr 10, 2012

System Restore will not create a restore point or restore to a previous date & time.The error message was: A restore point could not be created: An error was detected in the Volume Shadow Copy Server (VSS).The problem occurred while trying to contact VSS writers. Verify that the Event System Sevice and the VSS service are running & check for associated errors in the event logs (0x80042318).Volume Shadow Copy is started & running (done in system events).Event System Sevice and the VSS service are started and running. But no cigar, SR still broken.

View 9 Replies View Related

[System Restore] Scheduling Automated Rollbacks Of System Restore Points?

Aug 10, 2011

Does anyone know how to schedule/automate a rollback to a system restore point at a set time each day?What i'm trying to do is:1. Disable the standard system restore behavior for creating restore points when installing apps and drivers.2. Automatically/schedule a restore point to be created every morning. (probably using Task Scheduler)3. Automatically/schedule a rollback to that morning restore point every night.This should allow users to mess up the workstation during the day, and restore a working rollback point at night when users are not using a workstation.Updates are scheduled at nighttime, so before that happens, it should rollback to a good restore point, apply updates, then create a working "new" restore point with the updates in the morning....etc.

View 4 Replies View Related

Restore Registry From System Restore's Comand Prompt

Jun 26, 2011

So I cleaned my registry using RegSeaker and now my computer BSODs at the 'starting windows' screen, even if I try to start in safe mode. I created a backup of my old registry before cleaning and I can access it using the command prompt that you can access in the system restore options. However, when I try to update the registry with it I get an error message saying 'cannot import.

View 7 Replies View Related

System Backup & Restore Will Not Restore Bookmarks Or E-mails?

Feb 9, 2012

OK, so a couple of days ago, my HP desktop crashed and then went through the whole System Recovery loop(I couldn't login to Safe mode, wouldn't let me past the System Recovery Screen). Well I backed up the entire C drive using Backup your files in the menu. Then it shows you all the file types it will back up; i.e photos, videos, e-mails and bookmarks. So I did that to an external hard drive and it comes out to 143GB.Now comes my problem. I've been able to copy everything from the external hard drive using RecoveryMgr.exe which opens the WIM files and saves them to my C: hard drive under System Recovery Files. However it does not seem to work when it comes to putting in my old Thunderbird e-mails, contacts and such or in Firefox to restore my bookmarks, saved passwords.

View 1 Replies View Related

Can't Do System Restore , Not Enough Free Space To Restore The Disk

Dec 28, 2011

I am trying to restore my computer because it launches into system recovery. After I get to the recovery options I tried to do system restore but it tells me there isn't enough space on the disk.

View 6 Replies View Related

Full System Restore/Restore Factory Settings?

Apr 17, 2012

not A legel verison of window 7. wont to restore to factory setings.

View 1 Replies View Related

System Restore Failed To Restore (ComPlusStaging Error)?

Jan 18, 2013

I have tried a lot of things and I can't get system restore to work. I don't need to use it but I would like my computer to be working since there is no reason for this not to work. I just keep getting ComPlusStaging failed to obtain original copy from %systemroot%/registration all the time.

View 9 Replies View Related

System Restore - How To Restore Backup Created

Aug 26, 2012

I have been have some problems with my HP dv 8500 laptop. It has vista on it. I could not get any windows updates. So I backed up my files to a flashdrive and did a system recovery. I have files on the flash drive but cannot transfer them back to the laptop. I would love it if someone could guide me through the process.

View 9 Replies View Related

Windows 7 System Restore Doesn't Restore?

Aug 25, 2011

My Windows 7 System Restore doesn't restore. It allows me to set them and tells me they've been done. But on the couple of occasions when I've wanted to use one, no joy. Yes I know I could possibly do it in 'Safe Mode' but that isn't an answer as to why I can't do it in regular mode?

View 2 Replies View Related

System Restore Fail On All Available Restore Points

Feb 15, 2012

System restore failed to extract the file. from the restore point. There was a disk failure during the restore. This might be caused by bad sectors on the disk. I get the same message, but with a different file name, with every restore point I try, and I have now tried all seven available restore points, going back to 30 Dec 2011. The computer was working perfectly until 3 days ago when it blue screened, and has not started properly since. It is a Corei5 with 4 GB RAM and is only 12 months old. I just dont believe the drive has that many bad sectors.

View 9 Replies View Related

Restore Personal Files After System Restore?

May 19, 2012

my Windows 7 after restoring it to factory configurations. I installed Ubuntu 12.04, the installation smooth as butter, but after a few days of usage, the GRUB system screwed up. After a LOT of problems I managed to restore my Laptop to its default configuration. Then, I tried to restore my personal files with the DVDs I made, but when the manager finished, it only showed a folder with all my files in it! And it didn't give me any option to restore these files or something!

View 3 Replies View Related

System Restore Does It Restore Windows 7 Email

Jan 14, 2013

I lost 2987 emails by clicking on email tab in windows task manager All the emails disappeared so now >>??? wondering if Sysytem restore restores email as well with Win 7 are do I have to do like Ive seen ? Go to your documents folder and right click on the folder titled Mail the properties and then the previous versions tab.Click on a restore point from before it was deleted and click restore.

View 3 Replies View Related

Dell XPS Crashes .System Repair,system Restore ,safe Mode Don't Work

Mar 8, 2012

I am having the following system configuration

XPS L401X Base
Genuine Windows(R) 7 Home Premium 64bit (English)
Intel(R) Core(TM) i7-740QM Processor
6GB 1333MHz DDR3 SDRAM (1 x 2GB + 1 x 4GB)
640GB 7200RPM Hard Drive

Lately whenever i try to start my computer it pass the Dell Bios and then directly goes to the screen which states
Repair your system or Start windows normally When i chose repair system , it start downloading windows files and then launch the windows , but hung up at the sky blue login window with only movable cusor . When i choose to start windows normally it gives me BSOD momentarly ( hard to see the message) and then restarts again . i tried with the advanced boot up options like
repair my computer , all safe modes , restore to last good configuration but it does the same and hangs at windows loging sky blue window .I Tried to run the Dell PSA+ Diagnostic and it returns with 2000-0146 error . As per the Dell online solutions for this type of error ,I tried to reinstall the Hard disk but the problem still exist.

View 3 Replies View Related

System Image On System Restore Disk Not Reading After Crash?

Oct 2, 2012

Using preinstalled Win 7 Home Premium 64bit on an HP 6813w Pavilion. The original hard drive, a Hitachi HDS721010CLA332 1Tb crashed.1) System Recovery discs was made along with a System Recovery with System Image disc.2) A more current System Image was made on an external hard drive.The Hitachi was replaced with the same model. Checked bios to make sure it was installed correctly.Under System Recovery, Image Restore, Select a System Image Backup there is nothing in the table to choose from as far as a source (disc drive or external drive).A) System Recovery (3 discs) has the HP preinstall file folder on the 3rd disc but is not read by the System Recovery program.B) Under System Restore, Image Restore, Advanced, it asks for a network or driver to be installed. That opens up the directory of C: which is the external hard drive. Under WindowsImageBackup the computer name is identified followed by three entries:[CODE]It seems to me the Recovery and System Restore discs are not functional. Am not a technical person but I have taken this as far as I know how at this point.Printed out all the instructions from HP and Microsoft to follow step by step but the failed discs will not allow me to move forward.

View 2 Replies View Related

Windows 7 Won't Startup, System Repair And System Restore Failed?

Feb 15, 2013

Living is south FL can be a bitch when the rains come as there often is a ton of accompanying lightening that plays havoc with the electrical system, even though I have surge protectors inside and outside the house. We just had some very heavy rains with lightening and my computer shut down several times, but I could restart it each time...except for the last time when Windows wouldn't startup. At that point, Start Up Repair came into play. Although I routinely backup on an external drive, of course I never did it this month-DUH!Results from SUR were error free (error code=0x0) on all the parameters tested, however there were the following error codes reported:"Unspecified change to the system configuration might have caused the problem." Failed: 0x1fRepair Action: System FilesFailed: x490There were more options to select for a recovery task, but I didn't try them as they didn't seem to be as salient as the two above.

View 6 Replies View Related

System Restore Says There Are No Restore Points?

Jan 30, 2013

ive got a sony vaio laptop that worked fine until i dl a pdf file and tried to view it, the machine froze and i had to reset it, since then it will not boot, booting from hd it gets to the windows logo then flashes up a blue screen with text on it that stays on for 1 sec then it resets and starts again.ive tried the sony recovery tools that shows no partitions on the hd, system restore says there are no restore points.

View 13 Replies View Related

Where Does System Restore Keep Its Restore Points

Feb 6, 2013

I am using Windows 7 Professional (64-bit) 6.1.7601 Service Pack 1. I used System Restore to undo system changes to my computer. I want to undo this System Restore operation, but System Restore says there are no restore points.

View 1 Replies View Related

Restore Files After System Restore?

Sep 30, 2012

I recently did a system restore and when I started it up some of the documents are gone from the desktop. retrieve them they where word files .

View 1 Replies View Related

System Restore Unable To Restore

Mar 23, 2010

I can create restore points. I just can't restore from them. I get this message:

System restore failed while restoring the registry from the restore point. The restore point was damaged or was deleted during the restore.

I have tried restoring in Safe Mode.I have deleted all restore points and turned off sys protection, rebooted and turned System protection back on.I have uninstalled Kaspersky (my system protection).I have made sure Volume Shadow Copy is started.

View 5 Replies View Related

Where Does System Restore Keep Its Restore Points

Feb 8, 2013

I am using Windows 7 Professional (64-bit) 6.1.7601 Service Pack 1. I used System Restore to undo system changes to my computer. I want to undo this System Restore operation, but System Restore says there are no restore points. How then can I undo this?

There were many, many restore points before. I have recovered the entire contents of C: with Recuva. What do the restore points look like?

View 1 Replies View Related

Cannot Create A System Restore Disc(s) (Cannot Do A System Recovery)

Mar 21, 2011

I want to have a Factory Reset of my computer. In order to launch a System Recovery, I need to create Restore Discs. When I launch the Recovery Disc Creation, it says:"This computer does not have a burning drive, which is required to make DVDs. Please contact HP Support for asistance."My computer did not come with a build in CD Drive. Even plugging in a USB CD Drive will not make creating the discs possible. So. I ask you. How can I reset my computer to Factory Condition?

Computer Specs:

Windows 7 Home Premium (64-Bit)
Model: HP Pavillion dm3 Notebook PC

edit: This notebook came with a Recovery Partition built in.

View 4 Replies View Related

System Not Dual Boot After System Restore In Windows 7

Oct 19, 2012

Did a system restore in Windows 7 and my dual boot system (Windows 7&XP) won't boot. It's looking for a boot device. When I put in a Hiren boot 10.6 disk, the dual boot option is one of a number of alternatives, and it allows me to get into my pc. How can I get back to having the system work like it did before? So it boots to the dual boot option without Hiren.My SSD drive is the main drive for Windows 7 &XP. It has two partitions.

View 1 Replies View Related

System Restore Point : Create At System Startup

Feb 27, 2010

How to Automatically Create A System Restore Point at Startup ?

View 0 Replies View Related

System Repair / System Restore Not Working

May 8, 2011

The other day I was trying to figure out what coral paintshop pro meant by security key, so I googled it. Something popped up and asked me if I wanted to download, and I wanted to say no, but my laptop's mouse is too sensitive at times, so I accidentally clicked yes. My computer automatically shut down right after that. Every time I turn it on now, it goes straight into System Repair and it doesn't work, it says it cannot repair. I've tried System Restore, but since that doesn't get rid of the documents that have been downloaded, it isn't helping either. My computer won't even let me enter any form of Safe Mode, it just goes straight back to System Repair.

View 3 Replies View Related

[System Restore] System Drive Is Full

Feb 18, 2012

My C: dreive is a 128GB SSD which devided into 70 and 50 GB.Windows and all programs are installed on 70GB, the 50GB drive is free.All programs are about 11GB, Win7 ultimate 64 is about 17GB so all together it should not exceed 30GB. Suddenly I found on one day that my user folder became 25GB without any reason. When looking into it and calculated all subfolders it even did not come to 1GB.So the C drive is almost full and I have no idea for the reason.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved