Can't Get Computer To Do A Factory Restore?
Feb 16, 2013
1st off, My user name is not a joke. I have a hp G72-B27CL Notebook that was purchased online from aGoodwill auction. The notebook looks brand new & in their listing for the auction they said it just needed a hard drive so I put my WD 500 GB hd in it & attempted to do a system recovery. It went through the whole process & ended with Welcome TO YOUR NEW HP COMPUTER, About a minute later it was showing Restoration Incomplete with the options to Retry or try to find out what the problem was, Well it would only allow me to try again, Which I did (actually 2 more times) Of course same results. Their is no recovery CD'S that came with the computer, However it does have the windows product key # on the back of it. This computer will not let me do anything else except keep trying to recover it. (Which is a total waste of time) Should I erase everything on that hard drive ? It really has nothing I care if I lose or not & how would I go about erasing the hard drive ? The computer I'm talking about wont let me do anything except what I have shared.
And I don't want to put the hard drive in another computer & mess up what ever computer I put it in. This really is a bummer because I felt I was getting a good deal + helping out a organization, So the bottom line is right now I have a pretty laptop that doesn't operate & I am currently down $232.00 + shipping cost. I truly apologize for the length of this post, But as I stated from the start I'm truly lost. Any suggestions & please remember you are replying back to someone that is truly lost, so if at all possible if you choose to respond. Talk in language I understand.
View 9 Replies
ADVERTISEMENT
Jul 11, 2012
his Compaq laptop keeps automatically performing a factory reset. This time it seems when he was installing Service Pack 1, it began the factory restore operation.
View 6 Replies
View Related
Oct 3, 2012
I remember a while back I got a BSOD, but I fixed it by reformatting my C drive, this didn't remove my OS or touch anything on my D drive however. I would now like to do the same, not because I have a problem but because my computer is becoming sluggish and I haven't reformatted for a long time. However, searching up how to reformat the C drive, without removing this OS seems literally impossible, every post I see just says the following: get your OS disk. Despite this, I managed to get the C drive back to factory defaults while keeping the OS, all my drivers for my hardware (graphics card, sound card etc.) intact. I would like to do the same again, if it is actually possible. This was originally a box PC so I don't have any CDs except for the one for my new graphics card which I replaced a faulty one with.
View 3 Replies
View Related
Jul 31, 2011
how to restore my computer with out a cd.
View 1 Replies
View Related
Oct 18, 2011
how do i restore my computer back to factory setting.
View 1 Replies
View Related
Sep 17, 2012
I recently did a system restore to factory settings and now my computer is running very slow. I have done all the windows updates and checked for any updates on the drivers. I also defraged it. I noticed that the physical memory is always very high between 85 and 100. The CPU is 10-50.
View 5 Replies
View Related
Feb 23, 2013
My Dell Inspiron N7110 keeps crashing on startup. I briefly see a blue screen and receive the error "Stop 0x0000007B". I tried to run startup repair but it says it could not fix the problem. Here are the details[CODE]
View 2 Replies
View Related
Oct 22, 2011
I have the original discs supplied to me by acer, had to zero out the new HDD because their tech didn't know what they were doing. So now how do I and what is the partition size? acer aspire 5750-completely restore computer to factory default settings on new HDD what is the % of OS partition size (100% is default) but 100gb is minimum for windows (about 40%)
View 13 Replies
View Related
Apr 17, 2012
not A legel verison of window 7. wont to restore to factory setings.
View 1 Replies
View Related
Sep 21, 2012
If I do a factory restore, will it wipe the backup that's on a 2nd partition?
View 1 Replies
View Related
Mar 26, 2012
My notebook (HP Envy 14) had been attacked by malware, and after eventually destroying the virus, I've realized that the system files/programs were severely damaged. For instance, when I attempt to open Internet Explorer or Firefox, a window appears, asking me to browse for a program to open the "unrecognized" Internet Explorer with... and this process applies to most of my programs, such as Microsoft Word (in order to open Word, I must indirectly open a word file document, it's impossible to simply click on Word from the start menu). So, that's why I decided to return my notebook to its original state, using the System Restore factory option. However, when I attempt to run system restore (after saving all of my important files onto an external hard disk), an error message comes up: "Error: Recovery Manager cannot run from the hard drive. Recovery Manager must be run using recovery media to perform a Factory Reset." What exactly is "recovery media" and why is this message appearing?
View 1 Replies
View Related
Jul 14, 2012
Having a little trouble restoring my computer to factory settings. I dont know why but I cant seem to just do it through the advanced menu because it says i dont have a restore point. Does anyone else know how to Restore my computer totally without having to buy a new operating system, Or even Just using a old one.
View 4 Replies
View Related
Aug 10, 2012
My problem is with my hp laptop running windows vista. laptop is hp pavilion dv6225us. OS was upgraded to windows 7 ultimate. was getting messages saying this version of windows 7 was not genuine so i tried to restore my laptop to factory settings. this failed. do not recovery disc; could not get recovery manager by pressing f11 at boot up. now at boot up i receive this message 'remove discs or media; press any key to restart. pressing any key nothing happens. how can i get to recovery partition to restore to factory settings.
View 3 Replies
View Related
Feb 25, 2011
I recently had a virus/malware attack on my system, removed it, but the system is damaged (Security center & updates cant be started etc) . I want to restore the comp using the acer feature "restore to factory settings". But I wonder, must I have a Win7-installation CD after the restore?? Because the computer came with preinstalled Windows 7 when I bought it. Keep in mind that it's a factory settings restore not a complete format c (i think) I've done a backup on hardrive "D" of my current system in case of anything going wrong. If a Cd is required, could you tell me another way to format the comp without buying the CD? My security center is damaged, so restore to point doesnt work either. If you got any solutions to how to start security center except setting it to "automatic" in services.msc (Since this doesnt work), please post 'em.
View 4 Replies
View Related
Dec 31, 2011
i was havin probs with my pc DELL isnpiron 17R ,,it was about missing of some storage drivers ,, i contacted a dell agent ; after he viewed the device manger and trying to reinstall them he couldn't and he told me that i've ghost or something in my registery and i need to do a restore to factory settings..i tried to shut down pc and turn it on again then i pushed the F8 button and i choosed " Repair Your Computer " and then i got " windows loading files " ,, stuck on it ,,,i tried to restart the pc and do it again but nothing i tried to remove battery and placed it again and retry but nothing i stucked on the same page.i used registry boost program on this site ,, after scan ,, i had a high damaged registery.
View 5 Replies
View Related
Jul 30, 2012
Okay, my computer is very clogged at the moment and I would like to do a complete restore, but I have some files that I need to keep. Is there a way I can do a complete restore but keep some of the files (no external hard drive).
View 2 Replies
View Related
Jan 21, 2012
I have a dell Inspiron n7010 and im trying to reformat my computer. I backed up all my personal files into an external hdd. However when I try to restore my laptop to its factory settings, I get stuck. Upon booting up my computer I press f8 to get into the advanced boot menu. From there I select system repair but after selecting that, it always gets stuck at windows is loading files. It doesn't look my computer is loading anything either and it doesn't make sounds as of it were.
View 5 Replies
View Related
Mar 18, 2012
For a variety of reasons, I want to do a clean install on my laptop, which is a Dell Studio XPS with Windows 7. I don't have any Windows disks (it's 2 years old and I'm fairly sure I wasn't provided any), so I'm trying to do it through advanced boot options. When I hit F8 during startup and select repair, I am shown the screen "Windows is loading files..." and then the system starts as usual, rather than giving me options for a fresh install, which the description (and every set of instructions I've seen) would suggest.
View 13 Replies
View Related
Jun 23, 2011
i have changed my hard disk on my dell inspiron 1440 but and i have install windows 7 ultimate x64, but when i activate my windows, my laptop does not boot. its probably about my bios since i have install a new hard disk and i need to restore my factory image
View 2 Replies
View Related
Jan 25, 2012
My computer has been slowly deteriorating the last few days. It first ran a system repair every time I started the computer and would then boot to the desktop, then it would just loop through the system repair screen over and over. I am thinking that my last option is to restore the computer to it's factory default since I have everything backed up on an external hard drive.
View 3 Replies
View Related
Dec 13, 2012
It was working great and I noticed that it would not recognize an external drive I was going to install some progs from, even though I can go in to Admin Tools and see it there, and then I tried taking it online and it says Windows Explorer not responding all the time, so I think the best bet at this point is to restore it back to out of the box condition.I just started tweaking on it, so it's not like I'll be losing much work.
View 9 Replies
View Related
Dec 30, 2012
So im looking to restore my PC to its factory settings so i saw from a video that says all i have to do is go to, Control panel->System and security->Backup And Restore->Recover system settings or your computer->Advanced recovery methods->Reinstall Windows (requires Winodows installation disc) so yeah, will this work? im pretty sure the disc i have that came with my comp is the right disc, on the disc it says"microsoft windows 7 Reinstallation DVD", Windows 7 Home Premium 64-bit.
let me know if this is the right disc and if this is the right way to reset to factory settings that would be super awesome!!!!
View 9 Replies
View Related
Jan 30, 2013
im trying to restore my X51 to its factory state so when the SYSTEM RECOVERY OPTIONS comes up there is no alienrespawn or Dell DataSafe Restore and Emergency Backup, Iv gave it a shot from alienrespawn app when i click on restore its says that it will restore to Orginal factory state so restart after that the SYSTEM RECOVERY.
View 3 Replies
View Related
Jul 15, 2011
I had trojan virus in my G62 hp and windows corrupted and it doesn't start and just goes to windows error recovery and it shows "Launch Startup Repair, Start Windows Normally" but it doesn't start anywhere so what shall I do now?
View 1 Replies
View Related
Sep 23, 2011
there's something wrong with my HP Windows.o sound for instancehow can i restore the factory settings and start over?will this destroy data I've worked on. [i have backed up stuff]
View 3 Replies
View Related
Feb 7, 2010
i got acer emachines e627 laptop and i dont have any cd to restore and i forgot the password. how to restore factory settings without cd and without log in.
View 3 Replies
View Related
Feb 1, 2013
I have an inspiron mini, can't find model # anywhere. Is windows 7. I want to restore to factory defaults but do not have the admin password (owner died).
View 1 Replies
View Related
Jul 19, 2011
I have an Acer Aspire 4730z laptop, upgrading from Vista to Windows 7 Ultimate. Did the upgrade install, but unable to by-pass the eRecovery Management.The 3 options are 1. Restore system from factory default. 2. Restore system from user's backup and 3. Exit. Option 1 and 2 are grayed out. Have disable the D2D Recovery option in the Utility screen. But still unable to by-pass the eRecovery Management. If am unable to by-pass this, my only option is to insert my recovery disk and restore to factory default losing data store on HD.
View 3 Replies
View Related
Jan 28, 2012
Once upon a time I set up a Windows PW so I could have a separate acct for guests. Then I spent time couch surfing and had my PC in a box. When I started using it again, I found I couldn't remember the PW anymore, and after a week of trying to recall it, was forced to do a Factory Reset. I lost ALL of my files, installed software other than what came with the system, and of course - because the guest acct had no Admin privs, I couldn't make a back-up before the factory reset... Is there any way to revert the process to a time say... Before I instituted the Windows PW? So not just roll it back prior to my Factory Reset, but ALSO to a further time in the past (reset 1/21/12, but need to revert to 10/01/11)..??
View 2 Replies
View Related
Oct 2, 2011
My dell inspirion 1545 keeps going to computer rpair every time i turn on my laptop. It then says it can not find problem and can not fix the problem and then when i hit finish it shuts down. when i try to go to system retore it says Parameter is incorrect and once i hit okay all i have is the windows 7 background picture and cant do anything but shut down comeputer and restart. Then computer repair starts all over again.. i do have the reinstallation disc. My computer is no longer under warranty
View 6 Replies
View Related
May 7, 2012
i have a copy of windows 7 and bought a custom made pc with an ASUS p5421-xl2/gb motherboard and i don't feel safe keeping whats on it currently. i want to start from scratch i don't really have files that i know i need to back up and haven't even really messed with with it much because i want it brand new. can someone help me? my computer is running on windows 7 i beleive currently.
View 1 Replies
View Related
