Ubuntu Installed Inside Windows 7 Missing Boot Entry After 7 Repair?
Feb 15, 2012
Previously I have installed Windows XP then Windows 7 in different drives of my computer. Later installed Ubuntu 10.10 inside Windows 7 and upgraded it to 11.04.After that Accidentally I have formatted Windows XP drive from Ubuntu. I installed XP again to the same drive. I tried to repair Windows 7 and it worked fine, but the problem is I can boot only Windows 7. I have used BCDEdit tool to add entry to boot menu. This also worked fine that I am able to boot both Windows 7 & Windows XP.Now I want to boot Ubuntu 11.04 also using already installed partition.I don't want install it again(as I have to update it to 11.04 again).I have Windows XP in C drive, Windows 7 in D drive and Ubuntu 11.04 in E drive.
I am working on Samsung notebook with Intel atom processor (without DVD Rom). I installed antivirus and later restarted the machine. After the restarting it tells me "windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your windows installation dics and restart your computer and other procedures 2. Chose your language settings and click nex 3. Click repair your computer"
If you do not have this disc, contact your system administrator or computer manufacturer for assistance. File : ootBCD Status: 0xc0000098 The windows boot configuration data file does not contain a valid OS entry.
I'm just looking for advice on running Windows 7 Professional inside a virtual machine. I'd like to know what kind of performance I can expect from the following applications and others of their class.
Capture One (http://www.phaseone.com/en/Software/...-Overview.aspx) Adobe CS5 (Photoshop, Illustrator, Bridge, Flash) Microsoft Office 2010 Sony Vegas Games requiring DirectX 9+
Basically, I'm done with malware, long boot times, and huge system overhead and would like to switch to Ubuntu for my everyday computing, web surfing, writing, media consumption, etc. and fire up Windows in a VM only when I absolutely need it. As the list above implies I do lean pretty heavily on the processor and video card when I'm working or playing, and I'm wondering how Virtual Box would handle it.
Tech Support Guy System Info Utility version 1.0.0.1 OS Version: Microsoft Windows 7 Professional , Service Pack 1, 32 bit Processor: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz, x64 Family 6 Model 23 Stepping 6 Processor Count: 2 RAM: 3070 Mb Graphics Card: NVIDIA GeForce 8400M GS , 128 Mb Hard Drives: C: Total - 285718 MB, Free - 61867 MB; Motherboard: Dell Inc., 0JX269, , .42MCPH1.CN7878389N001F. Antivirus: AVG Anti-Virus Free Edition 2011, Updated and Enabled
I recently installed Ubuntu 10.04 on my HP Mini 110-1116NR, then deleted the partitions that had Ubuntu on them, not knowing that Ubuntu comes with GRUB2, and sets itself as the default boot for that system. Now that GRUB2 is not installed, since it was on my only HDD, it looks for the GRUB2 partition, which does not exist.
I was trying to reclaim some unallocated space on the drive and in the process seem to have lost boot manager, so it won't load Windows. If I put the disc in, it's not able to automatically able to repair because it says the repair disc I'm using is not compatible with the OS I have installed. This is the same disc I used to install Win 7 in the first place. Tried using cmd prompt to reload boot manager manually,and it completes the operation successfully but still says bootmgr is missing at start up.What's scaring me is that if I try to just install Win 7 again (onto the unallocated space), the hard drive just turns off and the hdd light comes on solid. This is when I choose 'Install Now' from the opening screen before selecting partitions etc. I'm typing this post from a spare hdd. The only thing I can think off at this point is the get an enclosure and recover my files; then wipe the hdd in question and reinstall Win 7.
I have a hp G71-449WM Notebook running Windows7 premium 64bit. I can't boot computer the repair disc I have doesn't seem to work. I have no installation disc to fall back on and I can not seem to get it to boot in safe mode. Right now its asking me to find the needed driver in the driver folders. Unless it's called something else I do not see a bootmgr driver. Right now its asking me to connect to the network which would be cool but i don't know what folder they where asking me to type in.
In doing this, the disk will not execute the set up and gives me this error message [error in syssetup.dll missing entry: UpdatePnpDeviceDrivers
barefoot2
I have the same problem on two seperate computers one was a fresh installation using a new hard drive and the other was a upgrade from vista. both 32 bit and both installed from the same installation cd.what is required is syssetup.dll patch for win7?
I'm using windows 7 home premium. I have an application in ASP.Net which uses Excel Application Object. It used to work fine in XP but in Windows 7 I'm getting an error as mentioned below: Retrieving the COM class factory for component with CLSID {00024500-0000-0000-C000-000000000046} failed due to the following error: 80070005.
I need to give permissions to Microsoft Excel Application in DCOM config but I can't seem to find this in windows 7. It used to be there in earlier versions but now its not there. I tried to reinstall Office 2007 but still I couldn't find it in DCOM config. where I can give permissions to MS Excel Application so that my application runs without errors.
One of my friends has a Windows 7 computer, but suddenly it could not start,I got an error like this
File: BootBCD Status: 0xc0000098 Info: The Windows Boot Configuration Data file does not contain a valid OS entry
And I ran a Code: chkdsk c: /f /r followed by a Code: Bootrec /RebuildBcd , where it asked me, if I want to add the entry to the BCD store, and of course I answered yes Afterwards I rebooted the computer, but it came up with a blank screen. I then tried to restart the computer and it keeps coming up with a blank screen. I tried to repair using the Windows 7 - cd's repair, but with no succes. It found the Windows 7 Home Professionel, but when I tried to repair it, it says, that it could not find the OS (something like noOSInstalled). I then came into cmd again, and tried first with Code: BootRec , but it could not find the OS.Now I set it to run Code: chkdsk over the night, but what can I do, if I comes up with the blank screen again? Do I have to reinstall the computer, or are there other solutions?
CHKDSK found ad sectors in the following files Code: WindowsassemblyNATIVE~1.303PRESEN~1FFB7C7~1PRESEN~1.DLL WindowsassemblyNATIVE~2.303SYSTEM~3.SER559EBA~1SYSTEM~1.DLL If this indicates something
Maybe I have to try with F8, when I restarts the computer for the first time after running the Code: BootRec .
When I start up Windows, I have two options, "Windows 7" and "Windows 7 Home Premium (Recovered)", and only the second one works. This is annoying because it defaults to the first entry.Some background info: I added a second hard drive to my laptop, and I used an Ubuntu install disc to move Windows 7 to the second hard drive and install Ubuntu to the first (larger) hard drive. When I start up my computer, the Grub boot loader gives me an option between Ubuntu Linux and Windows 7.When I first tried to boot into Windows, it had problems (caused by finding itself on a new drive I assume) and attempted to do startup repair which didn't change anything. It had detected a Windows 7 installed on drive "E", attempted repair, but on reboot I got to the same place. Next I used the Windows 7 Repair disc that I had burned earlier, which appeared to do the exact same process of attempting startup repair, however this time when I rebooted I got the option between "Windows 7" and "Windows 7 Home Premium (Recovered)". The first option causes it to do what it did before, and the second option gets me into Windows 7 fine. Windows still sees its hard drive as "C" which is good.While looking for solutions to this, I found the bcdedit utility. I attempted to rename "Windows 7 Home Premium (Recovered)" to just "Windows 7 Home Premium" to test whether it changed anything, but when I boot up I still get "Windows 7" and "Windows 7 Home Premium (Recovered)". I don't even know where the "Windows 7" entry comes from.
Here's the output of `bcdedit /v`:
Code: Windows Boot Manager -------------------- identifier {9dea862c-5cdd-4e70-acc1-f32b344d4795} device partition=C: path ootmgr description Windows Boot Manager locale en-US default {74e62c05-aa3f-11e1-90f0-e412b6135969}
windows boot configuration data file does not contain a valid OS entry (0xc0000098)Trying to fix my aunts laptop (Toshiba satellite/windows 7). Tried a recovery disc, which was painfully slow but no joy.
[code]....
I did the diskpart thing in command prompt:
vol 0= E dvd rom vol 1= C 100mb partition (active) vol 2= D 232gb partition
I have 2 HDs in my tower, 1 has windows 7, and 1 has server 2008 R2. I installed the server OS to play around with Hyper-V but enver did and I want to remove it to throw a linux distro on it. What's the easiest way to fix the boot record to reflect that server 2008 isn't there anymore?
I can't get Win 7 to boot after setting up dual boot (Ubuntu 10.10) on my GF's laptop. I'll describe the problem and everything that has been tried so far. REALLY hoping somebody has an idea, I'm getting desperate.I installed Ubuntu last night via the Live CD. Used the Live version to install alongside Windows and partition the drive, install Grub, etc. At reboot, after POST it would just go to a black screen with a flashing cursor. I could only run off the live CD. A forum member determined the Grub was trying to load from the wrong partition. We changed that and voila! Grub now loads properly. I can boot into Ubunto via Grub with zero problems. HOWEVER: when I try to boot into Win 7 from Grub, it just locks at the same flashing cursor of death screen. The 7 partition is till intact, I can see and access all the files on the 7 partition from within Ubuntu, however 7 will not boot. I have tried downloading and burning the Win 7 repair disk and doing all of the following,Running the automatic Start Up Repair - several times. All it does is remove Grub, but booting still goes to the flashing cursor and I have to reinstall Grub again to be able to do anything after POST.I have used the command prompt to run "bootsect /nt60 SYS /mbr". Has the same effect as above.I have used all the bootsec.exe /fixmbr, /fixboot, and /rebuildBCD commands. Again, all have the same effect and I have to reinstall Grub to get anywhere.I don't have an installation disk to try and just do a repair install because Asus apparently doesn't feel that I would need one of these. All I have is the recovery disks from the Asus AIRecovery application that want to just re-format the entire drive and start over. This isn't an option. It's my GF's laptop (mine gave up the ghost last week) and we both have WAY too much highly important data on here. Not to mention she would castrate me . Now from all my research the only other thing I've come across that sounds possible is that the boot flag needs to be set to a different partition. Somebody had a somewhat similar problem and it turned out the way Dell set up the system the boot flag had to be moved to a recovery partition and it worked fine. I'm wondering if Asus has something similar going on, but I can't figure out how to move the boot flag. I'm going on 12 straight hours of working on this now
I installed Windows 8. Then created a new partition ad installed Ubuntu on it.But now if I want to select Windows 8 in Grub, it waits a couple of seconds and then restarts Grub. [URL]how to get Win8(Consumer Preview) working again?
If you've been using Windows XP for a while now and want to try out window 7 or vista, you might have tried dual booting! In that case once you installed windows 7 or vista, you may have noticed that your windows XP entry has disappeared. But do not worry. Your windows XP is still there. The only problem is windows 7 just overwrote the windows xp bootloader. This is a easy fix. Just follow the steps below.
Open an elevated command prompt (Start > type "cmd" > right click on "cmd" > run as administrator)
To create an entry for Windows XP type the following. You can replace "windows XP" with any name that you want it to show. Code :bcdedit /create {ntldr} /d "Windows XP" Now specify the partition where windows XP is installed. Here I have used my E partition. Choose the partition (B, C, D, E, F) where you installed your XP. Code :bcdedit /set {ntldr} device partition=E: Now to set the path type... Code :bcdedit /set {ntldr} path tldr Type the following to add this boot loader to the boot up screen. Code :bcdedit /displayorder {ntldr} /addlast
Restart and you are done!
If for some reason you get an error and are unable to boot into windows XP, then get back into your windows 7 installation and download the boot files from [URL] and paste it in your WIndows XP partition's root directory. [URL]
I wanted to do a bare metal restore aka Restore my Windows 7 hdd to another hdd for a different system with dissimalr hardware form the original rig it was on. The new rig is a ASRock N68C-S FX Motherboard. the old rig was a MSI K9A2GM. Everythig else is the same (hardware wise). I use the Acronis Backup Restore Cd (latest version) to restore my Windows 7 image and I downloaded all the latest drivers from Nvidia's site (b/c they are the manufacturer of the motherboards chipset..Geforce 7025/nForce 630a. I always get an error after the revovery (which is in the log I pasted below towards the very end). For some reason it cant find the driver for PCIVEN_10DE& DEV_03F1 SUBSYS_03F11849 REV_A3' and 'PCIVEN_10DE & DEV_03F2& SUBSYS_03F21849 & REV_A3' . Whihc I found out are my usb 1.1 and 2.0 controllers made by Nvidia. I would imagine the drivers I downloaded would have covered this. So when I try to boot up windows 7 on the new restored target drive it still restart loops when loading the ATIpcie64.sys driver. If I delete it from the Windows 7 driver folder, windows just starts into Windows start up recovery mode attempting to repair the problem to no avail.
I've downloaded Bluestacks to sync my android apps with my pc and it worked just fine. Shortly after I've gotten a request from Microsoft to run some updates which I've accepted. I left my workstation and when I came back 2/3 of my desktop icons had vanished and there were about 30 application error windows on my screen. The pc was blocked and only CTRL+alt+del worked, so I've shut down the pc. Since then nothing worked. I can't boot Windows 7, can't start safemode.The only thing that works is F2 (Setup) and F12 (boot options), but I don't get far there.Remedies: I've tried the following without success:
1) Rebooted W7 from the CD, ran the repair option out of which system image won't work and although I see system restore points (I have bi-monthly points), I get an error abort message. So no luck there
2) I've downloaded the Ubuntu 12.04 ISO on a UBS flashdrive and at least succeeded to get the initial Ubuntu screen but couldn't install (subinstall it under Windows 7 was suggested) and thus had no chance in recovering my files/docus/media. The computer goes back to the black screen with the blinking unusable cursor.
3) I've tried to follow the suggestion from your Tech JSntgRvr by downloading the "Farbar Recovery" program and execute it in the Window command prompt, but I get an error message that states:x:sources>i:frst.exe is not recognized as an internal or external command, operable program or batch file. (with "i" being the drive where the usb flash was)So now I am out of my "very limited" wits.
How can i dual boot windows 7 and Linux. Can i just create a disk partition and install Linux on that and have windows on another partition and will i be able to choose which one i want on boot? or do i have to do something else i have windows installed now.
I just finished installing Ubuntu 10.10 and was wondering how I could boot Windows 7 instead of ubuntu. Ubuntu loads and does not give me a choice of wanting to run Windows 7.
I have a dual Ubuntu 11.10 and Windows 7 Home Basic booting system on my laptop (VAIO, specs at the end). Each time I switch on my laptop, Ubuntu's GRUB first shows me the options as to which OS to boot from. The choices include Ubuntu and Windows 7. To install Ubuntu,I made a 25 GB unallocated volume on my hard disk. Recently, while updating Ubuntu to its latest version, my internet crashed and the download only partly succeeded. After that, I have never been able to use Ubuntu on my laptop. However, GRUB is still functioning; each time I switch on, I still see the options as to which OS to boot from. If I choose Windows 7, then I get the usual Windows 7 Booting screen.Basically, I now have 25GB of space lying unusable on my machine. I want to merge this with one of my other partitions. However, I fear that doing so would delete GRUB and make my laptop impossible to boot. What steps should I take? Is there any way whereby I can safely delete Ubuntu and change the boot sequence from GRUB to the Windows boot program? (I guess it is BOOTMGR.EXE)
I have an ASUS N61Jv that came stock with 4 GB DDR3 RAM. Everything else is stock on the system except for a 500 GB Seagate Hybrid drive. I'm trying to upgrade to 16 GB (2x8 GB) and my install of Windows 7 Pro 64-bit fails at the loading windows black screen and reboots. "Attempt Repair" option fails, as well as trying to load the setup disc. I made sure UEFI setup in BIOS is disabled so as to not effect the Windows 7 boot disc.I would start to think it's a hardware issue, but BIOS recognizes 16 GB and I can boot into Ubuntu 12.10 (dual boot setup) and look up with an app that reports 16,xxx MB of RAM so I see Ubuntu can pretty much recognize the new RAM sticks as well.
Ok so what i have is Windows 7 RC installed to my hard drive. I have a seperate partition which i would like to install Ubuntu on. Granted i could just go ahead and straight install but then i would be using the Grub bootloader and i don't want to.
I have a Windows 7 OS installed on a SATA drive, A few days ago I installed Ubuntu 10.10 on an IDE drive. So far the only way is to switch the HDD drives in BIOS to boot up the one I want.
I currently run Ubuntu as the sole OS on my Laptop. Using a G-Parted live CD I partitioned half of my disk space, the one half dedicated to running Ubuntu and the other half to Windows 7. I downloaded a torrent of Windows 7, one that I have used before with success (so one that I trust) and burned it to a DVD-RW at the slowest burning speed possible. I booted Windows 7 through the DVD and began to do a clean install of Windows 7 on this one Partition that I left completely empty for the new OS. Everything runs smoothly and I go through the set-up until suddenly the installation hangs at 0% when 'Expanding Windows Files'.
