Ace Aspire 5672 Battery Causes Keyboard And Touchpad Malfunction
Dec 4, 2012
I upgraded my Acer Aspire 5672 from win xp to Windows 7 hm prem 32bit. I realised that the keybd and touchpad fails to function when I have the battery unit installed, but they work fine as soon as I remove it. Before the upgrade, I run the microsoft upgrade advisor program and it did not flag the battery. Secondly, I dual boot with ubuntu 12.04 and the keybd and touchpad works well in the ubuntu platform except that it receive very minimal charge. The laptop runs on the minimally charged battery for a short period.
I received an update to windows 7 on my hp PC. One of the updates was for nvidia software, however I noticed that after this update that when watching video on full screen that the image was much brighter more contrasty and sharper, so I fouterd (fiddled)about with the various nvidia menus to no avail. I eventually decided stuff this I'll just do a system restore and that should sort it. The only good bit was that my full screen mode was back to normal; but the first thing that happened was that when I went to type my password I couldn't type using the keyboard so I had to use the easy access on screen keyboard using my mouse. Even with windows up and running the keyboard simply won't function, in desperation I tried a couple more restore points and none them worked. I used the F8 KEY with keyboard to get into safe mode and this worked but as soon as the password is needed the keyboard does not work and even in safe mode it's not there.but the keyboard obviously functions since I can use it F8 mode; now the latest thing is that any system restore points fail.In F8 mode selection I notice that there is the option of Computer Repair but if I take this route does this mean that all my software will be removed?
I am about to install Windows 7 on my Acer Aspire 5920 but don't know if the touchpad drivers will work on Windows 7. I know that the touchpad will work but worried about the scroll down/up feature of the touchpad. Which you can only make work with Acer software, but they don't support Windows 7 right now.
I recently bought an acer aspire 5000 laptop on craigslist to replace my macbook that was stolen from the coffee shop... looked for another macbook but couldn't find any reasonably priced so decided to give windows 7 a try. it has windows 7 professional installed. 1.8 amd turion 64 processor and 2 gb ram. it needed a battery so i got a new one thru amazon. installed the new battery, charged it until indicator turned green. my question is is 2 2 hours and 10 minutes reasonable battery life or do i need to calibrate the battery monitor? new battery has been installed for almost 2 weeks. my macbook got almost 4 hours on a charge...
I have recently purchased an Acer Aspire 6530 laptop, which comes shipped with Windows Vista x86. I promptly made the restore DVDs, and installed Windows 7 x64, with no issues, except, one rather important one: the TouchPad driver does not work.
When Windows first booted, the driver that comes with Windows worked fine. You did not get the scroll functionality from the side of the pad, which is meant to act like a scroll, but it recognized movement and the two click buttons. After getting on the Internet, Windows automatically went out and found the Synaptics TouchPad driver for me.
Now, according to Device Manager, the driver will function after a restart. TouchPad works fine, go to restart, driver is applied, and.. nothing. The mouse will not move. Any USB mouse if plugged in works fine, but the click buttons and the movement on the pad do nothing.
If you go into Device Manage and uninstall the device, the TouchPad works again! It seems whatever TouchPad drivers that are loaded with Windows 7 work like a charm, besides the built in scroll area, work wonderfully, but the driver that it automatically downloads/installs on boot does not after restarting and applying that driver, even though the device is fully functional according to Device Manager.
Is there any way to FORCE the built in Windows 7 drivers, or a known fix to get the normal ones to work? Does this have to do with 64bit vs 32bit at all?
Note: I have downloaded the driver from the Acer website for Vista and ran it in compatibility mode for Vista, with no change, so it is not just the one Win is automatically finding.
Note2: I tried booting without any internet connection after disabling the driver, but Windows went ahead and installed the driver anyway. It was either still downloaded, or in fact comes with 7 and is not gotten through Windows Update, but is not installed initially? Plug and play is weird sometimes =/.
Today my laptop keyboard and mouse stop working for some odd reason because some weird anti vurse popped up on my computer freezing it so I restarted it . I thought my computer frozen so I would restart it , but I just hooked up my keyboard and mouse and they work just fine on the laptop , but when i unplug them i can't use my keyboard or mouse to my computer. I am not sure if i pressed something to make the touchpad and keyboard stop working .Maybe I could have put in sleep mode or something.
Monday afternoon I turned my computer on and noticed that every two minutes or so the computer would freeze up for up to 15 seconds, after which I had another one-two minutes of uninterrupted use and then it would freeze again.
The Computer Dell Inspirion Laptop E1705/9400 Windows 7 and Windows xp 40gb and 120gb HDD 1gb ram Dual core (centrino?)cpu need more info? ask.
(only on Windows 7)I'd done two major things in the past week and neither one of them could have had caused this because there'd been so much time in between. The first was I networked a couple folders on my hard drive so they were accessible on the rest of my home network (on Friday). Second I'd installed GIMP on my computer (Saturday night).
(only on Windows 7)I did a restore point from about a week ago, still had the same problem, then I tried uninstalling GIMP and turning off file sharing, still nada.
I thought maybe it was a software problem and because I had a website due in a couple hours I thought I'd swap out the Windows 7 hard drive which I was using and instead use a hard drive with Xp, Oddly enough all the problems I've mentioned up to now and the problems I'll mention persisted on both platforms (unless otherwise stated), also note I hadn't used Xp in months (about 3 months ago was the last time I'd used it in a computer.)
After messing around some more I noticed that my touch pad wasn't working at all (I'd been using a external wireless mouse until then) The drivers somehow uninstalled themselves and pretended to not work when I reinstalled them.
The only thing that kinda worked was booting in safe mode, then the courser would freeze but not anything else. When you look at this with the fact that the touch-pad doesn't work and the problem persists cross-platform, it begins to look like a BIOS or hardware problem, not a software thing.
Other Weird Phenomenon
(only on Windows 7) Stumble Upon doesn't show up in the toolbar even when it's enabled and checked off as supposed to be there, in Firefox.[this one is just weird... it could be that I updated it and didn't realize and it's not playing nice with some other add-on, I'll look into that.) On screen keyboard also wont work in safe mode while courser is frozen (but mouse isn't). When I access files through file sharing from a different computer they are also subject to freezing, meaning that if I have a HTML file open in notepad ++ ( that's on the laptop) every two minutes or so it'll freeze up for 10-15 seconds.
I just installed windows 7 ultimate on my daughters, acer aspire 3050 laptop. It was running vista home basic before. The vista install was damaged by viruses, so I decided to upgrade her to 7. All the hardware was recognized, but for some reason the keyboard does not work, it was working fine with the virus riddled vista install. For some strange reason the windows key does bring up the start menu, but none of the other keys seem to do anything.
They all work in the BIOS just fine. Also the touch pad does work, but the cursor movement is very jerky, and it was also fine in vista. I went to acer's site, they don't have any windows 7 drivers available for this model, or any vista drivers for the keyboard, I installed the vista touch pad drivers, but they did not seem to help. I also messed with the keyboard settings in control panel, but nothing seems to help. Does anyone have any ideas, on what I need to do to fix this. I have been really pleased with 7 on my other computers, and would hate to have to go back to vista.
Been having a problem with my laptop recently and when I turn it on the keyboard and touchpad don't seem to be responding but when I go into safe mode this is working. Also when trying to run system restore this is getting the the finalising stage and then doesn't actually work.
When I press the same button many times, entire keyboard and also touch-pad are getting stuck (not responding anyhow), but the Bluetooth mouse is functioning fine. Whatever I try can not fix it! The only thing to do is to restart the laptop, after restarting forking just fine, unless I start to press the same button many times (like if I will delete something with Backspace key, it is getting stuck)
My laptop recently became buggered by a virus and as I did not have a windows 7 installation disc I decided to restore it to its factory default using some sort of dell backup utility.Since I did this my touchpad and keyboard no longer seems to work! keyboard works fine when i select f8 on startup as i can flick through the options however when i boot into safe mode the touchpad and keyboard still don't work.
I have an Acer 5732Z laptop that has never given me trouble until today. I was in the process of updating my GPS when it told me to restart the computer with the GPS still plugged into the USB drive. However, when the windows 7 login screen came on, I was unable and am still unable to get my touchpad or keyboard to work. The GPS is unplugged and still nothing. It's not disabled (touchpad), safe mode/system restore doesn't work and I am past warranty so Acer cannot help.I am currently just stuck on the login screen. Have tried USB mouse and keyboard, nothing.
I just got a new laptop and started doing a little gaming (KOTOR and Battlefront II), the only problem is those games use awsd to move and the touchpad to look around and I can't use the touchpad while using the keyboard. Is there any way to enable touchpad use while using the keyboard?
So last week I received my brand new HP Envy 15, with a Core i5 540m (2.5-3.3ghz) Ati Radeon 5830, 4gigs of DDR3 ram, and a 500gb HDD. (Of course running Windows 7 Home Premium 64bit.) And everything was running awesomely- Until yesterday when I went to turn it on and when it got to the login screen everything on screen was gigantic, and my keyboard and touchpad were unresponsive.
I tried using a usb keyboard and still no luck. Booting into safemode yields the same results, even without networking. Yet when booted it up disabling driver signature enforcement, it worked fine, except everything was slow and my sound didn't work. Is there any way I can boot up regularly again and get my sound working?
I've only had the Acer Aspire One D250 laptop for less than a year, and the battery already started to fail. For some reason, it never charges up to 100% and after leaving it charging, the white light starts blinking Akku Acer Aspire One D250,Adapter Acer Aspire One D250
Last night my keyboard and touchpad stopped working on my laptop and now I'm using the usb mouse and the "On screen keyboard". I have done a system restore but to no avail. I've also taken out the battery (found in another thread) but nothing. In device manager there is an exclamation mark next these:1. Under keyboard. keyboard device filter2. Under mouse and other pointing devices. ELAN PS/2 port smart padDouble clicking both of them gets these properties for each respectively:1. Under keyboard. Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)2. Under ELAN PS/2 port smart pad. This device cannot start. (Code 10)The laptop is an Asus x53sv running win 7 64bitI made a recovery disc (in fact there 5) when I first got it but using that wipes the hard drive C:. I know that for XP there is a repair program which you get to by following the procedure for doing a re-install but you have this option which doesn't wipe the hard drive. I've used it.Does something similar exist for Win 7?
My wife's Samsung notepad keyboard and touchpad have stopped working. The odd thing is that the keyboard does work at startup - I can press F4, arrows, Enter, etc to start up in safe mode, but still the keyboard and touchpad do not work as soon as we get to the login screen. I have tried system restore, unplugging the cord and battery. At the moment I can get it to work using a USB mouse and the on-screen keyboard
A couple days ago, my keyboard and touchpad mouse stopped working. I thought it was a hardware issue and ordered a replacement keyboard. As for the touchpad, I'm just using a wireless mouse. I replaced the keyboard a couple days later with the new one, and when I turned on my laptop, it works again, but when I put my laptop to sleep and wake it up, I hit enter, and then it stops working. I cannot type anything until I restart my computer. I figured it has to do something with the drivers, but I'm not too sure. Here is my computer specs:
Product: HP Pavilion dv9700 Model: dv9925nr Windows 7 home premium 64bit
I've gone to the HP website to get the drivers, but they do not support windows 7 for my computer.
i have read about similar problems on here but none of the solutions worked for me. the keyboard seems to work just fine until the "starting windows" screen appears then absolutely nothing. i've tried reinstalling the alps pointing device drivers, i uninstalled then installed the newer version, nothing seems to work. the computer was working just fine until i came home from work and turned it on. this same problem happend about 2 months ago and it magically fixed it self, i just never turned the computer off again. i have 2 identical sony vaio VPC-EB33FM/BJ models, and have compared all the drivers and settings, they are the exact same (except the newer version of Alps on the broken one). i ran one of those "scan for new drivers" programs that ask for money to update drivers that it says are old and it said that the HID keyboard device driver is way out of date along with several others, but once again they are the same as the ones on the computer i am using now and this one works like a champ
I just got a new laptop (Lenovo G770) and am busy configuring Windows on it. I am running into an annoying issue with my input devices. Whenever I type or do anything with my keyboard, it disables my touchpad for about half a second. Since I am an avid user of keyboard shortcuts, this is highly annoying and is messing with my productivity. I can't figure out how to turn it off--when I search for answers I just see lots of threads from people having the opposite problem, who want to disable their touch pad while typing. I currently have the Synaptic driver installed controlling my touch pad, and I can't see any options in its settings to disable this "feature".
I don't know for sure the the Win7 update killed the track-pad, but about a week or so ago after I let it run I've lost the track-pad function completely and the keyboard is erratic. If I accidentally hit the Caps Lock key the keyboard stops responding. I discovered if I open the keyboard control panel and just change a parameter, like how fast the cursor blinks and APPLY then I get the keyboard back without rebooting. I downloaded the track-pad driver, says it's the same as installed but the system no longer recognizes it's there in the control panel. This is an HP G60 series laptop running Win 7 Home.
I'm downloading TSG to add that info, but searching I see many people have had similar problems like this with no solution on various brands of laptops and Windows.
I don't know what the latest update was but it updated when I was shutting down my laptop (Compaq CQ60). I am running Windows 7 Ultimate x86 and have never had any problems. I plugged in my USB mouse from my PC and the laptop accepted it and let me use the mouse, but I was still unable to use my keyboard/touchpad. I tried booting in safemode but my keyboard doesnt work so I cant scroll to it. I also noticed that my laptop did a Checkdisk or something along that lines, I believe thats what its called.
I recently upgraded my Sony Vaio VGN-730E/B from Windows Vista Home Premium 32bit to Windows 7 Professional 64bit. According to the Microsoft Tool for upgrading to Windows 7 and the specs for the notebook upgrading to Windows 7 64bit is possible. have tracked down and modded drivers for Nvidia GeForce 8400M GT, Wireless Card, Ethernet Adapter, Motherboard, Synaptic Touchpad...
- which is the problem, the touchpad driver invalidates my keyboard...
- if I don't install the driver, they scroll function of the touchpad doesn't work
Also, I am unable to find a driver for my keyboard or peripheral buttons on the laptop...It's not a big deal, but my eject button for my DVD Rom device doesn't function...
I allowed the battery on my Acer notebook to run out causing Windows to shut down and lock the current files. As I needed the files urgently I asked a professional to recover them, which he did. Later I connected the mains power and recharged the battery. Now the notebook keyboard will not allow me to enter my password when demanded. The mouse and touchpad work. I have used F8 to try to restore the previous status.
My problem is that after turning on the power for the very first time, it will not recognize my keyboard. I have several different keyboards and I tried them all- including the Acer keyboard that came with the PC.I think my mistake was that before turning on the power, I had plugged in both an HDMI connection to my TV as well as a DVI connection to an Acer 23" monitor. Then when I powered up the PC, it defaulted to the HDMI output but I didn't realize that and was expecting it to displa on the monitor.It took me a while to figure out that it defaulted to the HDMI connection. I started out by looking at my monitor and couldn't figure out why there was no activity on the monitor. But once I switched the TV input to "HDMI 1", I saw the output was displayed on my TV.Unfortunately, it doesn't seem to recognize any keyboard now although it does make a "clicking" sound when I press keys on the keyboard. I tried to press WIN+P to change the HDMI output to show the same output on both the TV and the monitor but it seems to default to "side by side" and the only thing that I can think to do now is to pull out the power cord plug and try to re-boot with just the monitor connected and without the HDMI connection.When I hit the "power off" button, it has no effect. Should I pull out the power cord from the outlet? Or is there some other way to get it to reboot?
My Acer Aspire 5820tz laptop will not work. The keyboard does not respond. The laptop sometimes goes to the Boot Manager when turned on, the boot manager flickers and is uncontrollable. Other times it gives off a loud violent beep sound. Once it went to login but the keyboard would not work so i could not login.
