I can share a drive, no problem. No one can actually touch any of the data on that drive unless I specifically share each item one by one. Is there a way to share a drive and automatically have EVERYTHING on that drive be accessible to network users?
View 4 RepliesI have multiple drives on my Vista machine, some are partitions. One drive it will not let me access thru the network, from an XP box, and another Vista box. All shared settings are the same on all the drives. I cant figure out how to access this 1 important drive from my network!
View 6 Replies View RelatedI have Vista x64 Ultimate on my desktop and Vista x64 Home Premium on my wireless laptop. I’m trying to share files and folders. I believe I’ve done everything I needed to enable file sharing on both computers. All my Sharing and Discovery buttons are turned on except Password Protect Sharing. I added “Everyone” to my sharing list on both computers. Both computers have the same Workgroup name.
I don’t know how to access the shared files/folders from either computer. All the web sites I’ve visited tell me how to enable sharing but none of them tell me how to access them. It’s probably a simple process but I can’t figure it out.
After months of diddling in an effort to access shared files on my XP computer from my Vista computer I was finally able to access the files using Windows Explorer after the final reboot after installing SP1. My glee was short lived however because after turning my Vista computer off and then on again I still cannot access the shared files on my XP computer. I can see the XP computer in "Network and Sharing Center" > "View Full Map", but I can't view the shared files by double clicking on the XP computer icon.
Network discovery - on
File sharing - on
Public folder sharing - on
Printer sharing - on
Workgroup is WORKGROUP on both computers I am able to access a shared printer on the XP computer I am able to access the shared files on my XP computer by using Internet Explorer and entering \Computername in the address bar. I am able to access a NAS drive on my network using Windows Explorer.
I have a laptop running Vista, my desktop is running XP, i want to be able to access files and the printer which is connected to the Xp machine on my vista laptop, but they cannot see each other. I have the file and printer sharing stuff turned on on the laptop. Also I am running AVG on both systems and I have the Windows firewall enabled on both. Both are connected to a D-link router, DESktop is wired, laptop is wireless. Also a friend of mine came over and has the same laptop as me except he is running XP on his and he had no problem seeing my desktop, or accessing its files.
View 9 Replies View Relatedusing the laptop through wireless I can see other computer and even list their shared folders but when I try to actually list files the connection timesout and gives an error os dennied access to the shared folder. If I try to use VNC for instance, the client connects, asks for pass and then after the remote screen starts to appear.. it hangs... no response after that . The strange part of the problem is that if I connect the laptop through a wired connection everything works ok I access shared folders, I print remotely, no problems. I tried a number of things , the most obvious, like firewalls diferent settings on the network etc. What I can't figure out is what can be so different in the PC for the wired to work but not the wireless.
View 9 Replies View RelatedI really don't know if the problem is with Verizon, Vista, MS, or something else, but hopefully someone has seen it: Friday, everything was fine. Monday afternoon, big problem. The only major difference was the Vista Service Pack 1 I ran this morning, so maybe that's it. I run the service pack on my Toshiba Satellite laptop (takes an hour or so). The next time I try to use the Verizon Versalink Gateway, it does connect my laptop to my Dell desktop (running XP), and I click on "access shared files". I open the C: directory on my desktop, and in a few seconds the status bar reads "179 items (Disk free space: 91.7 GB)." The problem is that a file showed up about every 15-30 seconds - for 179 files, it took 30 minutes until all files were visible in the panel on the right.
It "sees" that there are 179 files in the directory immediately, but the the dark gray bar CREEPS across the top of the screen, taking forever. If I want a file that starts with "w", I'd be waiting a half an hour for it. I'd be faster driving somewhere and getting two 5.25" floppy drives and installing one on each computer.
In my 'program files' folder I see subfolders with names I don't recognise, do not appear under 'control panel - uninstall a program', nor on the start button 'all programs' option. Is it safe to delete them ?
View 9 Replies View RelatedI am trying to organize the File and Printer Sharing on my home network, but I have one stubborn Vista PC (PC1) that can't access any of the network shared folders, or even it's own.
From PC1:
- Double-clicking on the PC1 icon in Network displays a "\PC1 is not accessible" error
- Typing \PC1 (or 192.168.x.x) into IE or Run gives the same error
- Clicking on "show me all the shared network folders on this computer" does nothing the point turns into circle for a few seconds but then nothing happens.
PC1 is running Vista Home edition
- Network Discovery is ON
- File and Printer Sharing is ON
- All computers are in the same WORKGROUP
- Password access is OFF
- Windows Firewall only (no Third Party Firewalls).
i'm used wireless connection in Vista...when i want shared my folder with other pc in wireless...the error "permission denied"...
View 5 Replies View RelatedWe have a network domain, all XP pro compters, though the domain controller is NT. I have successfully joined this vista pc, and can 'see' all of the computers and servers on the domain, BUT cannot access any of the shared folders. Can't map to them which is what we usually do, can't browse to them, it asks for a username and password but will not authenticate using good credentials, actually will not even authenticate using the server credentials. I have exhaustively checked the network settings but do not know where else to look.
View 4 Replies View RelatedONly 24 hrs into using Vista. I have added my Vista PC to my Home Network. I am trying to access the shared folder on my old PC that is showing on the network but I am denied access. I did have a password/user account set up on the old machine but have removed the password now. How can I access the shared folder across the network?
View 9 Replies View RelatedI've got a friends laptop to repair. I've determined that at least the boot files are damaged. I've connected the hard drive to my own PC in an attempt to recover the files from the drive. Unfortunately, my PC says that access is denied when I try to browse the drive. In the disk manager I can see the drive. I've gone onto the drive and updated the permissions on all the files to allow full access for administrators and users, yet I still cannot access the drive. I know that the content of the drive is still there because I COULD see the filenames zipping on the screen while the system was updating permissions. (That shouldn't work if I don't have permission, should it?) If I boot from an installation CD and try to access the drive from a recovery console it asks for the password for that Windows installation. I enter the only password that is on the laptop, but it does not work. There is only one user on the laptop, so that SHOULD be the password.
View 4 Replies View RelatedTitle says it all. Vista prompts for username/password to access a shared folder on an XP machine on my network. What do I have to do to fix this now? UPnP service and SSDP service is set to auto on the XP box. The folder is shared publicly on the network, not just local. Vista seems to think that it needs authentication to access the file. How could I disable this. password protection is already disabled.
View 6 Replies View RelatedI am running Windows Vista on my laptop and Windows XP on my home computer to which the shared printers are connected. When attempting to connect to shared printer from my laptop, I get the following error "Windows cannot connect. Access is denied" What am I doing wrong?
View 7 Replies View RelatedI upgraded my Vista Home Premium x64 to SP2 on 8/28. No problem until 8/31. Now I cannot get on the internet regardless of firefox, IE, or Chrome. The Windows Network Diagnostics did not find any problems. The network and Sharing center shows that I am connected to my network and then to the internet with no issues. IPv4 = Internet. IPv6 = limited.
Steps completed thus far:I rebooted the cable modem and the router (linksys wrt54g) I successfully pinged the x64 computer with a different cpu on the network. Status activity shows bytes sent and received successfully on the x64 system. I tried to system restore prior to SP2 upgrade but says failed, however System properties show that running SP1. I updated network card driver (intel 82567lf-2) to most recent - 7/23 I ran the Intel network card diagnostics and all test were sucessful Booted into safe mode with networking. Unsuccessful. Ran Hijackthis, nothing unusual. I am at a loss of what to do. I do even know how to describe the situation succinctly enough to search and see if others have had the same problem.
I have a desktop with XP and a laptop I recently purchased with Vista on it. I have been trying to access shared folders between the two computers and have found it impossible access each other. Here are some things you should know:
- Network discovery, file sharing, public folder sharing, and media sharing is turned ON. Printer sharing and Password protected sharing are OFF.
- Network is set to Private
- All computers are verified to be in the workgroup "WORKGROUP"
- Both computers can ping eachother
- Windows firewall is disabled on both computers. I have disabled and deleted Norton Anti Virus from both computers as well.
- Resolving through IP or Computer Name does NOT work
- Downloaded and installed Link Layer Topology Discovery (LLTD) Responder on XP Computer from microsofts website
http://www.microsoft.com/downloads/details.aspx?FamilyId=4F01A31D-EE46-481E-BA11-37F485FA34EA&displaylang=en
- Tried enabled NetBIOS on all computers as suggested by a forum post I read
I have one Vista PC that is being completely uncooperative.We have a bunch of computer connected through a router, some xp, acouple Vista.The best computer is an XP one, so I want to use it as a server for asmall upcoming LAN party. All computers can see and join the server for various games...all except this Asus Laptop with Vista!
I have firewalls shut off for the server computer and this laptop. I have the network on the laptop set to Private. On the laptop, I canactually see the XP computer. I can even open up and download shared files from it!
Regardless, I cannot see or manually connect to IP for any other server in the network (the XP or others...even the other Vista). This computer ust refuses. I have a LAN party scheduled for tomorrow and I'mfreaking out that some of the vista computers won't work.
I am running vista on a hp laptop. I can connect to the local network, but can't connect to the login website. I have tried several fixes including disableing ipv6. I feel the issue is when Im attempting to connect to this wifii public unsecure network Im unable to receive the redirect to the terms of use page. in the network sharing center it shows me conected to the local network but not to the internet.
View 0 Replies View RelatedDell laptop Inspiron 1545, WRT54GS - "Connected With Limited Access" - drove me up the wall. Tried everything. Browsed other forums for hours. What did I do? Just for grins, and for NO particular reason, I switched from WEP to WPA Personal / TKIP in the router and to WPA / TKIP in the laptop and other PC, entered the ten-char key I've always used, and POOF - instant connection.
View 1 Replies View RelatedI have my wife's and my own desktops (both XP Home) and my laptop (Vista Home Premium) all connected to the same ADSL modem. I want to set permissions so that I can access and do what I want with any file on any machine from any other machine.
On the XP machines this was a breeze. I can access either machine from any other machine and do whatever I want. But on the Vista machine, I'm prevented from doing this. The only files on the Vista machine that I can access from the XP machines are in the "Public" folder. I can't access the Vista machine's root menu or even the files in my own folder from the XP machines. When I try, I get this complaint:
You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. Access is denied. "T-pc" is the name of the name of the laptop in the "Workgroup" and "rlb" is my folder. I'm the administrator, so where do I go from here? How do I make Vista let the other machines access my files?
This problem is driving me up a wall. I try to connect, and I get a "Connected with Limited Access" or "Limited Connectivity" error.I have a NETGEAR_WPN284v3 and I'm on Vista.
Windows IP Configuration
Host Name . . . . . . . . . . . . : dmastt
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Wireless LAN adapter Wireless Network Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Dell Wireless 1510 Wireless-N WLAN Mini-Card
Physical Address. . . . . . . . . : 00-22-68-A8-32-ED.....
I am using vista ultimate, I noticed that under properties in my computer/remote,the box is checked for remote access?,as I am not connected to any networks,is this neccessary?,can I un tick the box?,or do I just leave it?
View 4 Replies View RelatedI have set up a Network based on a Desktop Vista based, which includes a wireless to a laptop Vista based and a hard wired XP desktop. This was done to acquire old data files of the XP desktop and transfer to the Vista desktop. That has all been accomplished. Those files have since been removed from the XP but the shared folders still show up on the Vista Desktop and Laptop network. Is there a way to remove these folders from the Network since they no longer exist on the original XP desktop?
View 5 Replies View RelatedI have a wireless computer...notebook and I have windows vista on it. I had comcast plugged into it and now that I am mobile again, I am not able to use the wireless. The computer keeps telling me I am connected; but, I can't get access to the internet. Can anyone please tell me what to do?
View 5 Replies View RelatedNetwork fully operational - Public Folder on Vista can be shared on XP - no problem BUT when I attempt to share another folder on Vista it requests username. Options include username on Vista, Guest, Everyone or Add name. It appears that Vista cannot see usernames on XP. Do I have to add these usernames to the Vista computer? I think the 'everyone' option applies only to 'Domains' which are not recognised on XP.
View 4 Replies View Relatedi have a netgear wireless router, one desktop pc connected to it with a Ethernet cable (still working fine) and a hp laptop running vista connected thought wireless everything was working fine until one day the wireless on the laptop just stopped working and gave the message connected with limited access i have disconnected from the network and tried to reconnect however all i get is connection unsuccessful then i go to diagnose the problem and have been given some suggestions by windows help i have checked my driver and they are all up to date i have also checked that both ipv4 and ipv6 protocols are ticked in the config for wireless networking, my adapter says working fine and i have checked that my WEP keys are still the same.
View 5 Replies View RelatedTrying to network XP pro with Vista Ultimate. I installed the LLtd Responder patch on XP. When i go to network map on vista I can see the XP machine but can not browse shared files or even click on the icon for it? I can't get the XP machine to see vista. Both have the same workgroup name. What am i doing wrong?
View 5 Replies View RelatedIn the network connection sharing, i see both me and my wifes laptop on the full map on her computer and my computer. I can not accessed shared files or desktop remote connection. I do have file sharing on and both computers are set on the same workgroup. All firewalls are configured and i've tried it with all firewalls turned off (vista firewall and gateway firewall).
View 7 Replies View RelatedI tried nortons WinDoctor to help fix any problems with missing shortcuts, missing shared files, etc etc and my pc wouldnt startup the next time! It used to work really well with XP and never did XP not start after WinDoctor,it only speeded the pc up,in my experience.Im reluctant to "try" any other registry fixing software,unless there are some well known Vista registry fixing software that someone can recommend in here?
View 7 Replies View RelatedI am puzzled. The Indexed locations shown when I press the show all locations button are Microsoft Outlook Start Menu and Users. Only Microsoft Outlook is checked. I was trying out the search facility above the start button on Vista to look for a program and was very surprised when up popped a selection of files that are stored on an external hard drive that I use from time to time as a secondary backup. The files shown have not been accessed recently and at the time of the search the external drive was not connected. Hovering the cursor over the files told me that they were located on this external drive. why these files would have shown up on the search as I have not chosen to have the external drive indexed?
View 5 Replies View Related