Access HDD When Connected To Another PC
Sep 16, 2009
I've got a friends laptop to repair. I've determined that at least the boot files are damaged. I've connected the hard drive to my own PC in an attempt to recover the files from the drive. Unfortunately, my PC says that access is denied when I try to browse the drive. In the disk manager I can see the drive. I've gone onto the drive and updated the permissions on all the files to allow full access for administrators and users, yet I still cannot access the drive. I know that the content of the drive is still there because I COULD see the filenames zipping on the screen while the system was updating permissions. (That shouldn't work if I don't have permission, should it?) If I boot from an installation CD and try to access the drive from a recovery console it asks for the password for that Windows installation. I enter the only password that is on the laptop, but it does not work. There is only one user on the laptop, so that SHOULD be the password.
View 4 Replies
ADVERTISEMENT
Sep 2, 2009
I upgraded my Vista Home Premium x64 to SP2 on 8/28. No problem until 8/31. Now I cannot get on the internet regardless of firefox, IE, or Chrome. The Windows Network Diagnostics did not find any problems. The network and Sharing center shows that I am connected to my network and then to the internet with no issues. IPv4 = Internet. IPv6 = limited.
Steps completed thus far:I rebooted the cable modem and the router (linksys wrt54g) I successfully pinged the x64 computer with a different cpu on the network. Status activity shows bytes sent and received successfully on the x64 system. I tried to system restore prior to SP2 upgrade but says failed, however System properties show that running SP1. I updated network card driver (intel 82567lf-2) to most recent - 7/23 I ran the Intel network card diagnostics and all test were sucessful Booted into safe mode with networking. Unsuccessful. Ran Hijackthis, nothing unusual. I am at a loss of what to do. I do even know how to describe the situation succinctly enough to search and see if others have had the same problem.
View 5 Replies
View Related
Oct 7, 2009
I am running vista on a hp laptop. I can connect to the local network, but can't connect to the login website. I have tried several fixes including disableing ipv6. I feel the issue is when Im attempting to connect to this wifii public unsecure network Im unable to receive the redirect to the terms of use page. in the network sharing center it shows me conected to the local network but not to the internet.
View 0 Replies
View Related
Jan 13, 2010
Dell laptop Inspiron 1545, WRT54GS - "Connected With Limited Access" - drove me up the wall. Tried everything. Browsed other forums for hours. What did I do? Just for grins, and for NO particular reason, I switched from WEP to WPA Personal / TKIP in the router and to WPA / TKIP in the laptop and other PC, entered the ten-char key I've always used, and POOF - instant connection.
View 1 Replies
View Related
Apr 30, 2009
I have my wife's and my own desktops (both XP Home) and my laptop (Vista Home Premium) all connected to the same ADSL modem. I want to set permissions so that I can access and do what I want with any file on any machine from any other machine.
On the XP machines this was a breeze. I can access either machine from any other machine and do whatever I want. But on the Vista machine, I'm prevented from doing this. The only files on the Vista machine that I can access from the XP machines are in the "Public" folder. I can't access the Vista machine's root menu or even the files in my own folder from the XP machines. When I try, I get this complaint:
You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. Access is denied. "T-pc" is the name of the name of the laptop in the "Workgroup" and "rlb" is my folder. I'm the administrator, so where do I go from here? How do I make Vista let the other machines access my files?
View 9 Replies
View Related
Mar 11, 2009
This problem is driving me up a wall. I try to connect, and I get a "Connected with Limited Access" or "Limited Connectivity" error.I have a NETGEAR_WPN284v3 and I'm on Vista.
Windows IP Configuration
Host Name . . . . . . . . . . . . : dmastt
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Wireless LAN adapter Wireless Network Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Dell Wireless 1510 Wireless-N WLAN Mini-Card
Physical Address. . . . . . . . . : 00-22-68-A8-32-ED.....
View 5 Replies
View Related
Jan 1, 2010
I am using vista ultimate, I noticed that under properties in my computer/remote,the box is checked for remote access?,as I am not connected to any networks,is this neccessary?,can I un tick the box?,or do I just leave it?
View 4 Replies
View Related
Mar 23, 2008
I have a wireless computer...notebook and I have windows vista on it. I had comcast plugged into it and now that I am mobile again, I am not able to use the wireless. The computer keeps telling me I am connected; but, I can't get access to the internet. Can anyone please tell me what to do?
View 5 Replies
View Related
Oct 22, 2007
I have a laptop running Vista, my desktop is running XP, i want to be able to access files and the printer which is connected to the Xp machine on my vista laptop, but they cannot see each other. I have the file and printer sharing stuff turned on on the laptop. Also I am running AVG on both systems and I have the Windows firewall enabled on both. Both are connected to a D-link router, DESktop is wired, laptop is wireless. Also a friend of mine came over and has the same laptop as me except he is running XP on his and he had no problem seeing my desktop, or accessing its files.
View 9 Replies
View Related
Mar 23, 2008
i have a netgear wireless router, one desktop pc connected to it with a Ethernet cable (still working fine) and a hp laptop running vista connected thought wireless everything was working fine until one day the wireless on the laptop just stopped working and gave the message connected with limited access i have disconnected from the network and tried to reconnect however all i get is connection unsuccessful then i go to diagnose the problem and have been given some suggestions by windows help i have checked my driver and they are all up to date i have also checked that both ipv4 and ipv6 protocols are ticked in the config for wireless networking, my adapter says working fine and i have checked that my WEP keys are still the same.
View 5 Replies
View Related
Feb 17, 2009
I can share a drive, no problem. No one can actually touch any of the data on that drive unless I specifically share each item one by one. Is there a way to share a drive and automatically have EVERYTHING on that drive be accessible to network users?
View 4 Replies
View Related
Jan 18, 2010
I am trying to access my Vista Computer set up by pptp to accept a vpn connection from a windows 7 computer. Network and file sharing are turned "on", and files are set to share. It says I am connected but "NO Network Access". using windows software only (no 3rd party). Does anyone know how I can complete this connection?
View 6 Replies
View Related
Oct 1, 2009
Since i built my computer I have been having fight with other family members over the internet as our router broke and we have to plug right into the modem (only one can connect at a time). Today i purchased a 8 port 10-100mbps network switch (Buying a router is not possible at this time) I connected the modem to the switch, then my computer and then the home computer. When i connected on my computer, everything was fine (I have vista ultimate x64 sp2.)
I then disconnected and connected the home computer (xp Pro sp3) Everything worked fine. Then I came back to mine and tried to connect and after a bit of waiting i got the message "Error 815" and that the server is not responding. When I do the opposite and connect my computer and then try connect the xp computer, I get the message "Error 676 the line is busy." I can browse both the computers files through network as long as I have the other computers password.Does anyone know a solution to my problem so that both computers can be online at the same time e.g. a shared internet connection from vista pc to xp pc or connect to the internet through the other computer and vice versa? P.S Both computers have kaspersky internet security but i tried disabling them and it still didnt work
View 5 Replies
View Related
Feb 6, 2009
This is not causing any problems, I just don't know why. I have an i7 on a Gigabyte GA-EX58-UD5, gigabit Linksys switch, Norton 2008 firewall, Vista 32bit, and 3 PCs (Vista, Vista, XP) in a LAN. Vista doesn't seem to think a LAN/switch is a real network? I can see all of the other network PCs, connect to the internet (DSL) thru a switch connected Linksys wireless router, share files, and printers; but it's bugging me.
View 7 Replies
View Related
Mar 23, 2008
I'm desperately trying to solve a network problem with Vista to a internet provider.
Nearly brand new PC with nVidia Forceware ethernet controller. After booting the PC, the network ICON in right bottom bar becomes blue. For 1 - 2 seconds the blue bell is visible, then disappears. It shows the PC is connected locally, but not to internet. According to IPCONFIG/all required IP addr, DNS, Default GW etc is set
correctly.
View 5 Replies
View Related
Dec 24, 2007
I went home for the Christmas break and I am trying to get my laptop to connect to the network back at my house. I set up a wireless network through the main computer and have found nothing but problems. The main computer is running XP and I am running Vista. Now, the problem is my computer will detect there is a wireless network available but it will not connect. It let me enter in a password to connect but it tells me there isn't enough strength to connect. This makes no sense due to the fact that it will display 90% network strength.
View 8 Replies
View Related
Jun 16, 2009
The machine has two NICs, both of which are connected to the Internet in the following fashion:
route 1: NIC 1 -- Internet (preferred Internet connection)
route 2: NIC 2 -- Switch -- Linux Cluster -- Internet (preferred LAN connection)
|-------(Printer, NAS, etc)
The linux cluster is consisted of some RedHat workstations, all of which are connected to the internet independently, but one of them (the frontend) also distribute IP and does NAT for the LAN. Also connected to the switch include some network resources, and this Vista machine..........
View 5 Replies
View Related
Apr 14, 2009
I'm re-posting this because it is only visible online at the MS website, not on NewsReaders so.... (I'll try again)...I just installed a D-Link DIR-625 router, before, we had a Linksys router with no issues whatsoever. (This is in secure WPA mode, there is no problem in "unsecure" mode) My sons PC has Vista installed. He has a D-Link wireless usb adaptor. Before, with the Linksys router, hookup was as would be expected, find the SSID, click, a prompt for passphrase, sweet. Now what happens is this... I right click the network icon in the taskbar and select "Connect to a network" a list of available networks shows.( as usual) I click our SSID and a different message appears than before, instead of getting the usual prompt for a simple passphrase, I get a "Windows needs more credentials to connect to this network", I click it and then a window appears prompting for...
Username
Password
Domain pass
this is not an option suitable for the usual WPA Personal encryption, first off there is no user name, no domain, its just WPA personal, TKIP,passphrase... what can I do? like I said it connects fine if no encryption is used. and it worked fine Lo these last 2 years with a Linksys WRT54G I'm not very familiar with Vista, I'm an XP man myself (I and my wife have XP, router installed on mine)(My wife has windows XP with a Linksys adaptor and it works fine so I know it is a Vista conflict)
View 6 Replies
View Related
Mar 23, 2008
I can't print nothing from my computer, the printer said the USB is no connected. I don't known what that means.
View 4 Replies
View Related
Jun 8, 2008
I have a printer connected via USB on my desktop computer running vista Ultimate 32bit and I have a Laptop running Home Premium 32bit it sees the printer cause its there on the printer's folder but when I try to test a print page from the laptop it says its being sent to the printer but nothing prints out. I know it works cause it worked when my desktop had XP PROFESSIONAL installed which was like 3 weeks ago. My desktop prints fine. I just need the laptop to print. By the way Im sharing the printer from the desktop
View 4 Replies
View Related
Mar 23, 2008
I have a Canon LBP 1120 printer connected to a Windows XP PC and a Vista Laptop. I used to be able to print from both computers..... suddenly the printer started rejecting orders to print from the Vista Lapton. It sends to the Canon printer menu but it disappears after a few seconds. I've reinstalled the driver but no joy. Find it strange that it used to print from the Laptop but suddenly stopped yet still prints from the Windows PC. don't wish to pay the ??99.00 Dell wants to charge to trouble shoot the problem!
View 4 Replies
View Related
Mar 10, 2009
Windows Vista Business with SP1 I have two NICs in my Vista Business SP1 machine - one NIC is connected to our corporate network, the other NIC is connected to a private network. Both networks are using DHCP, with the private network obtaining it's address from a LinkSys WRT54G (not being used as a router - just a switch with DHCP). The problem I having is that both networks end up with a entry in the routing table for 0.0.0.0 with the same metric. So anytime I try to access the internet (which should always go through the corporate network), I have a 50-50 chance of actually succeeding.
View 4 Replies
View Related
Nov 8, 2007
I recently bought an 8800 Ultra Extreme, I had a low PSU (580W) and was advised to upgrade, so yesterday I bought a 650W Zephyr PSU + Gigabyte 3d Galaxy2 liquid cooling system. I connected everything (including the 2 power 6 pin into the card) but in my motherboard I have a PCI_E (4 pin) power to be connected to that gives extra power to the card, I have a Gigabyte M59-SLI-S5 mobo. so it stayed up for about 4 hours yesterday, (testing games, and using the pc) without connecting that 4 pin power, I noticed lower FPS, but temps were more than fine.. Until now I realized the 4 pin power for the PCI_E onboard is not connected, so I connected it. now the FPS is back to normal, temps are still very normal, but i'm worried there might be something damaged with the card? I tested a few games and its fine, but i'm just worried. cus I have my 7950 GX2 artifacted, not sure why tho. Right now temps are 66C idle 74C on load.
View 4 Replies
View Related
May 18, 2008
I recently bought a new Dell with Vista Home Premuim and have not been able to connect to any of the six (6) wifi networks I've tried. Two home networks, one at work and three public. On each occasion I have been able to detect and where appropriate, provide security keys, but although it says it's connected it will not go on the internet or do any network activity. I do have a nice cheap Palm TX which connects to all of these networks, so I'm thinking it's a Vista issue. Given I bought a laptop for the explict purpose of using wifi, this is a rather expensive rock which is pretty much useless. Seems like lots of people have the same problems, but haven't yet found any solutions. What a surprise from Microsoft, eh?
View 4 Replies
View Related
Jan 27, 2009
I try to access folders under my name (set up as administrator), most of the time I get access denied. It is driving me nuts. I want to change the start menu and get rid of a bunch of garbage but I can't enter the folder to do so. When I use the start menu program, it only has a few basic folders. This happens frequently, even when trying to view pictures or video in the folder. What do I need to change to remove this very annoying problem?
View 9 Replies
View Related
Jun 23, 2008
I have my laptop connecting to a server under AD control. My laptop is not joined to AD by design. I set up some files using 'Sync' to have them available to me offline. My AD password has since changed and I cannot connect to the server to have access to other files set up for offline access. When I attempt to remap the drive, I get an error stating I am already connected using the credentials provided. This is not true, since I cannot access the server. What do I need to do to fix this problem?
View 4 Replies
View Related
Mar 23, 2008
I just got my HP Pavilion dv2068ca yesterday. I tried to connect through to internet. It was able to connects to my network, but not able to connect to the
internet. It also says my network is "Unidentified Network" It gave me options to diagnose and repair.
My laptop connect through 802.11 b/g WLAN
My wireless router is a D-LINK 802,11g 2.4GH
View 9 Replies
View Related
Feb 22, 2010
System InformationOS NameMicrosoft® Windows Vista™ Home Premium
Version6.0.6002 Service Pack 2 Build 6002
Other OS Description Not Available
OS ManufacturerMicrosoft Corporation
System NameDOM-PC
System ManufacturerDell Inc.............
View 9 Replies
View Related
Mar 23, 2008
i just got a new vista laptop and i have connected to my home router when i first got it. the next day i couldnt connect at all (well) it says im connected, with full bars but i cant seem to be able to browse the internet or get any kind of internet connectivity. i've search and tried the the whole disabling QoA and IPv6, but that doesnt work, neither does uninstalling or repairing the wifi driver thing.
View 9 Replies
View Related
Mar 23, 2008
I just barely got a new HP Pavilion dv9500 with Vista Home Premium on it. I have Comcast cable internet with a Linksis wireless G router. I have 2 other computers in my home with Windows XP, a pc and a toshiba laptop and have always had good consistent internet through the router with both of them. Now with my new vista laptop it shows that I am connected, but I cannot browse the internet at all. It just sits there and thinks and thinks and thinks, like its bogged down or something. I tried to download the Yahoo messenger, and it just sits at 1% and doesnt move. My Outlook (Office 2007) does not work at all. No sending or recieving at all. Is Vista the problem?? Is it my Router that isnt compatible with Vista???
I have tried the repair connection, and it just says it cannot be repaired.
View 9 Replies
View Related
Apr 22, 2008
I'm having problems with my home network. I find that I will be on the internet wirelessly with no problems, then all of a sudden I lose internet connection, but I still remain connected to the home network. I have tried disconnecting and re-connecting to the network, this usually doesn't help. Occasionally that will help, but then a couple minutes later, I have the same problem. I have tried running the diagnosis within the Network and Sharing Center. Sometimes it will tell me that it doesn't detect a problem and sometimes it will detect a problem. Then I try to reset the wireless adapter "Wireless Network Connection" and it will appear to have fixed it, and when I try to re-load the page it times out and then I lose internet connection again. The only thing that I have found that fixes the problem is to recycle power to the modem. (Pain in the ass!)
The modem is connected to a desktop computer (I don't remember what it's running, but I know it's a version of XP) and there are multiple laptops within the house that connect to it wirelessly and I'm the only one running Vista and the only one having problems. The modem isn't very old, so I'm not thinking that it's the modem, so because I'm the only one having problems, I'm assuming it's a Vista thing.
View 9 Replies
View Related
