I have multiple drives on my Vista machine, some are partitions. One drive it will not let me access thru the network, from an XP box, and another Vista box. All shared settings are the same on all the drives. I cant figure out how to access this 1 important drive from my network!
View 6 RepliesI can share a drive, no problem. No one can actually touch any of the data on that drive unless I specifically share each item one by one. Is there a way to share a drive and automatically have EVERYTHING on that drive be accessible to network users?
View 4 Replies View RelatedI am trying to organize the File and Printer Sharing on my home network, but I have one stubborn Vista PC (PC1) that can't access any of the network shared folders, or even it's own.
From PC1:
- Double-clicking on the PC1 icon in Network displays a "\PC1 is not accessible" error
- Typing \PC1 (or 192.168.x.x) into IE or Run gives the same error
- Clicking on "show me all the shared network folders on this computer" does nothing the point turns into circle for a few seconds but then nothing happens.
PC1 is running Vista Home edition
- Network Discovery is ON
- File and Printer Sharing is ON
- All computers are in the same WORKGROUP
- Password access is OFF
- Windows Firewall only (no Third Party Firewalls).
i'm used wireless connection in Vista...when i want shared my folder with other pc in wireless...the error "permission denied"...
View 5 Replies View RelatedWe have a network domain, all XP pro compters, though the domain controller is NT. I have successfully joined this vista pc, and can 'see' all of the computers and servers on the domain, BUT cannot access any of the shared folders. Can't map to them which is what we usually do, can't browse to them, it asks for a username and password but will not authenticate using good credentials, actually will not even authenticate using the server credentials. I have exhaustively checked the network settings but do not know where else to look.
View 4 Replies View RelatedONly 24 hrs into using Vista. I have added my Vista PC to my Home Network. I am trying to access the shared folder on my old PC that is showing on the network but I am denied access. I did have a password/user account set up on the old machine but have removed the password now. How can I access the shared folder across the network?
View 9 Replies View RelatedI have Vista x64 Ultimate on my desktop and Vista x64 Home Premium on my wireless laptop. I’m trying to share files and folders. I believe I’ve done everything I needed to enable file sharing on both computers. All my Sharing and Discovery buttons are turned on except Password Protect Sharing. I added “Everyone” to my sharing list on both computers. Both computers have the same Workgroup name.
I don’t know how to access the shared files/folders from either computer. All the web sites I’ve visited tell me how to enable sharing but none of them tell me how to access them. It’s probably a simple process but I can’t figure it out.
After months of diddling in an effort to access shared files on my XP computer from my Vista computer I was finally able to access the files using Windows Explorer after the final reboot after installing SP1. My glee was short lived however because after turning my Vista computer off and then on again I still cannot access the shared files on my XP computer. I can see the XP computer in "Network and Sharing Center" > "View Full Map", but I can't view the shared files by double clicking on the XP computer icon.
Network discovery - on
File sharing - on
Public folder sharing - on
Printer sharing - on
Workgroup is WORKGROUP on both computers I am able to access a shared printer on the XP computer I am able to access the shared files on my XP computer by using Internet Explorer and entering \Computername in the address bar. I am able to access a NAS drive on my network using Windows Explorer.
Title says it all. Vista prompts for username/password to access a shared folder on an XP machine on my network. What do I have to do to fix this now? UPnP service and SSDP service is set to auto on the XP box. The folder is shared publicly on the network, not just local. Vista seems to think that it needs authentication to access the file. How could I disable this. password protection is already disabled.
View 6 Replies View RelatedI am running Windows Vista on my laptop and Windows XP on my home computer to which the shared printers are connected. When attempting to connect to shared printer from my laptop, I get the following error "Windows cannot connect. Access is denied" What am I doing wrong?
View 7 Replies View RelatedI have a desktop with XP and a laptop I recently purchased with Vista on it. I have been trying to access shared folders between the two computers and have found it impossible access each other. Here are some things you should know:
- Network discovery, file sharing, public folder sharing, and media sharing is turned ON. Printer sharing and Password protected sharing are OFF.
- Network is set to Private
- All computers are verified to be in the workgroup "WORKGROUP"
- Both computers can ping eachother
- Windows firewall is disabled on both computers. I have disabled and deleted Norton Anti Virus from both computers as well.
- Resolving through IP or Computer Name does NOT work
- Downloaded and installed Link Layer Topology Discovery (LLTD) Responder on XP Computer from microsofts website
http://www.microsoft.com/downloads/details.aspx?FamilyId=4F01A31D-EE46-481E-BA11-37F485FA34EA&displaylang=en
- Tried enabled NetBIOS on all computers as suggested by a forum post I read
I have one Vista PC that is being completely uncooperative.We have a bunch of computer connected through a router, some xp, acouple Vista.The best computer is an XP one, so I want to use it as a server for asmall upcoming LAN party. All computers can see and join the server for various games...all except this Asus Laptop with Vista!
I have firewalls shut off for the server computer and this laptop. I have the network on the laptop set to Private. On the laptop, I canactually see the XP computer. I can even open up and download shared files from it!
Regardless, I cannot see or manually connect to IP for any other server in the network (the XP or others...even the other Vista). This computer ust refuses. I have a LAN party scheduled for tomorrow and I'mfreaking out that some of the vista computers won't work.
using the laptop through wireless I can see other computer and even list their shared folders but when I try to actually list files the connection timesout and gives an error os dennied access to the shared folder. If I try to use VNC for instance, the client connects, asks for pass and then after the remote screen starts to appear.. it hangs... no response after that . The strange part of the problem is that if I connect the laptop through a wired connection everything works ok I access shared folders, I print remotely, no problems. I tried a number of things , the most obvious, like firewalls diferent settings on the network etc. What I can't figure out is what can be so different in the PC for the wired to work but not the wireless.
View 9 Replies View RelatedI really don't know if the problem is with Verizon, Vista, MS, or something else, but hopefully someone has seen it: Friday, everything was fine. Monday afternoon, big problem. The only major difference was the Vista Service Pack 1 I ran this morning, so maybe that's it. I run the service pack on my Toshiba Satellite laptop (takes an hour or so). The next time I try to use the Verizon Versalink Gateway, it does connect my laptop to my Dell desktop (running XP), and I click on "access shared files". I open the C: directory on my desktop, and in a few seconds the status bar reads "179 items (Disk free space: 91.7 GB)." The problem is that a file showed up about every 15-30 seconds - for 179 files, it took 30 minutes until all files were visible in the panel on the right.
It "sees" that there are 179 files in the directory immediately, but the the dark gray bar CREEPS across the top of the screen, taking forever. If I want a file that starts with "w", I'd be waiting a half an hour for it. I'd be faster driving somewhere and getting two 5.25" floppy drives and installing one on each computer.
I have a Dell computer, had it about three weeks. I have two hard drives in a serial ATA Raid 0 stripe 500GB each. They are controlled by Intel matrix storage manager software. I want to have the two hard drives separate, like drive C and Drive D In the Bios I have two choices ATA or Raid, I have tried both ways to have them separate, however still can't. I have to say that I found this forum by chance, by goodness I am glad I did with drivers for my scanner and printer.
View 9 Replies View RelatedProblem:
1) Extremely slow shared printer response
2) application nonresponsive while printing
Network Topography:
1 Vista Home Premium 32 PC
1 Vista Home Premium 64 PC
Cisco SD2008 Switch
1 HP 4050 Laserjet (Parallel connected to Vista 32 Machine above)
Configuration of Printer:
Connected via parallel to Vista 32 machine
Printer is configured for sharing and is installed on both machines
test pages print successfully from both machines
Additional notes:
During printer setup on the Vista 32 machine, I attempted to install
additional 64x drivers, but could not locate them, so I skipped this step.
During printer setup on the Vista 64 machine, the shared printers were
identified successfully, and I added the network printer. I was not asked to
install drivers the way I have in the past when adding a local printer.
Printing using the shared printer on the local machine Vista 32 performs
with normal speeds. Printing from the network computer Vista 64 using the
shared printer installed on Vista 32 is extremely slow. Even typing in print
job changes in the print dialog window takes 30 seconds or so for each key
stroke to register a response onscreen.
I can't 'unshare' my documents folder from other users (I'm the only administrator account), I keep getting an error message that this folder is in a shared folder?
View 9 Replies View RelatedVista Home premuim. Network settings correct on both PCs. From Vista I can ping the XP by IP address and by Computer name. From Vista I can map a drive on the XP using either IP or computer name. However In Network XP PC name is present but double-click says no access.Shared printer on XP is not found by Vista Add Printer. XP can see Vista in Network Places and double-click shows shared folders.
View 6 Replies View RelatedI have 2 Dell laptops and I have connected them through cross cable. Now both are able to see each other, but not able to access the shared folder. I have tried changing the settings, but I am getting the same error that I do not have permissions to see the contents. The system whose IP address is 192.168.1.1 is Vista Home Premium and the other is Vista Home Basic. Both have McAfee installed. Do I need to disable it?
View 7 Replies View RelatedI have set up a Network based on a Desktop Vista based, which includes a wireless to a laptop Vista based and a hard wired XP desktop. This was done to acquire old data files of the XP desktop and transfer to the Vista desktop. That has all been accomplished. Those files have since been removed from the XP but the shared folders still show up on the Vista Desktop and Laptop network. Is there a way to remove these folders from the Network since they no longer exist on the original XP desktop?
View 5 Replies View RelatedI can't seem to find a way to name a shared directory -- the only option seems to be to use the exact name of the dir. Is it possible to give a share a differnt name?
View 4 Replies View RelatedConfiguration: HP Laptop with Vista Home Premium, Compaq desktop with XP home and Epson Rx500 USB printer shared, Dell desktop with XP home. All in same WORKGROUP. Symptom: XP systems print to RX500 OK. When adding printer to Vista, sees RX500 but get error message after "Connecting to RX500" box. Error messsage says Windows cannot connect to the printer. Access is denied.
View 9 Replies View RelatedHow do you get access to shared folders and printers on a wireless network?I've shared the folders on the desktop pc and set all the folders to be co-owned by everyone, the printer is shared yet Vista won't let my laptops can't open the folders or connect to my printer attached to the desktop.The laptops shows up on the network but I get is not accessible. You might not have permission to use the network resource.The specific network name is no longer available.They are all set to be Private networks and the workgroup name is the same on all computers.
I get following error message when at XP and trying to see a shared folder on Vista: "HPdesktop not available. You might not have permission." "Logon failure: user account restrictions. Possible reasons are passwords not allowed, logon hour restrictions or a policy restriction has been enforced." I do not use passwords and have not set any hour restrictions, therefore, only thing remaining is policy restriction.
View 5 Replies View RelatedI have troubles getting my laserjet 1018 to work with my Vista Home laptop. The printer is set up to my desktop computer wich runs Vista Ultimate and i have shared it in the network. Everything works alright until I adds the printer on my laptop. After that I can't print from any of the computers and the printer que just fills up and i can't empty it. If i reinstall the printer drivers on the desktop computer its start working there again but I cant get it to work propely when i have installed it on the laptop.
View 5 Replies View RelatedI have set several folders on my Vista machine to share, turned off Password Sharing (couldn't see anything with it on), set file sharing to on. In fact everything in the Network and Sharing Center is on except Password Sharing. Bit my Laptop can only see the public folder and an external drive I have setup to share on my Vista machine.
View 8 Replies View RelatedI have two computers, Vista Home Premium SP2 and XP SP2. Both belong to the same workgroup. Tonight I could see the XP computer from Vista. Then I rebooted the Vista computer and I can no longer see the XP computer's shared files. They are both connected via a linksys wireless router. I have Norton on both; both have the windows firewall turned off.
View 8 Replies View RelatedI have a Vista computer and an XP computer. Both are on a domain. I have an HP Laserjet 1018 printer attached and installed locally on the Vista computer. The printer is shared and is added to the XP computer. When printing from XP to the laserjet printer on Vista it acts like it goes..no errors but nothing comes out. However, if you restart the print spooler then the jobs start printing. The printer works fine when printing from the Vista machine but not when you try to print from other computers on the network. Anyone know how to resolve this without having to restart the print spooler all the time? Drivers have been reinstalled and that does not help.I also tried removing the printer. Re-adding it. Sharing it again and re-adding it to other hosts on the network....same issue.
View 5 Replies View RelatedI checked out many forums and seen many others with the same or similar problems. I tried all the suggested solutions with no results. I have a home network with 3 XP computers and a Vista laptop (Lenovo x60) running Vista Business. The network using both wired and wireless connections. I installed a NAS (Maxtor Shared Storage 2), and had to change the workgroup name (since the Maxtor could not handle the "@") character.
After I changed the workgroup name on all computer, the vista cannot find my shared printer, neither any of the other computers on my network. The XP machines do not see the vista either. I have internet access from the vista, but cannot print or do backup to the NAS. So far I tried:.................
I've got 2 Vista laptops. Both on Home Premium. One of them is sharing a usb Lexmark 8300 printer. The other one can see the shared resources and connect to that printer but it can't print. No error messages whatsoever. After printing a test page I can see number 1 next to the printer status but when I double click the printer the print job is not there. Both the computers are in the same workgroup. Both have Printer Sharing enabled in Network and Sharing Center. On the computer that's sharing the printer the Everyone group was given full access. All paper set to A4 on both of them.
View 4 Replies View RelatedI use Vista Home Premium. I have a network that connects one computer by cable and 3 computer by wireless. I also have a LaserJet 4 Plus. It has an adapter card that is connected to the router/modem by cable. I have gone thru the 'Add Printer' procedure several times. It 'finds' a TCP/IP 'generic adapter card and, after awhile, a list of printers is displayed. I select mine. Give it a shared name and click on 'print test page.' Nothing happens. I used to have a Netgear modem but switch to AT&T wireless router. I am unable to find a list of attached devices and their IP address.
View 4 Replies View Related