Configuration: HP Laptop with Vista Home Premium, Compaq desktop with XP home and Epson Rx500 USB printer shared, Dell desktop with XP home. All in same WORKGROUP. Symptom: XP systems print to RX500 OK. When adding printer to Vista, sees RX500 but get error message after "Connecting to RX500" box. Error messsage says Windows cannot connect to the printer. Access is denied.
View 9 RepliesI have a Vista computer and an XP computer. Both are on a domain. I have an HP Laserjet 1018 printer attached and installed locally on the Vista computer. The printer is shared and is added to the XP computer. When printing from XP to the laserjet printer on Vista it acts like it goes..no errors but nothing comes out. However, if you restart the print spooler then the jobs start printing. The printer works fine when printing from the Vista machine but not when you try to print from other computers on the network. Anyone know how to resolve this without having to restart the print spooler all the time? Drivers have been reinstalled and that does not help.I also tried removing the printer. Re-adding it. Sharing it again and re-adding it to other hosts on the network....same issue.
View 5 Replies View RelatedProblem:
1) Extremely slow shared printer response
2) application nonresponsive while printing
Network Topography:
1 Vista Home Premium 32 PC
1 Vista Home Premium 64 PC
Cisco SD2008 Switch
1 HP 4050 Laserjet (Parallel connected to Vista 32 Machine above)
Configuration of Printer:
Connected via parallel to Vista 32 machine
Printer is configured for sharing and is installed on both machines
test pages print successfully from both machines
Additional notes:
During printer setup on the Vista 32 machine, I attempted to install
additional 64x drivers, but could not locate them, so I skipped this step.
During printer setup on the Vista 64 machine, the shared printers were
identified successfully, and I added the network printer. I was not asked to
install drivers the way I have in the past when adding a local printer.
Printing using the shared printer on the local machine Vista 32 performs
with normal speeds. Printing from the network computer Vista 64 using the
shared printer installed on Vista 32 is extremely slow. Even typing in print
job changes in the print dialog window takes 30 seconds or so for each key
stroke to register a response onscreen.
Vista Home premuim. Network settings correct on both PCs. From Vista I can ping the XP by IP address and by Computer name. From Vista I can map a drive on the XP using either IP or computer name. However In Network XP PC name is present but double-click says no access.Shared printer on XP is not found by Vista Add Printer. XP can see Vista in Network Places and double-click shows shared folders.
View 6 Replies View RelatedWhen I click to print I get the usual "Printing to HP 4100 Series" then nothing.
View 5 Replies View RelatedI have troubles getting my laserjet 1018 to work with my Vista Home laptop. The printer is set up to my desktop computer wich runs Vista Ultimate and i have shared it in the network. Everything works alright until I adds the printer on my laptop. After that I can't print from any of the computers and the printer que just fills up and i can't empty it. If i reinstall the printer drivers on the desktop computer its start working there again but I cant get it to work propely when i have installed it on the laptop.
View 5 Replies View RelatedI checked out many forums and seen many others with the same or similar problems. I tried all the suggested solutions with no results. I have a home network with 3 XP computers and a Vista laptop (Lenovo x60) running Vista Business. The network using both wired and wireless connections. I installed a NAS (Maxtor Shared Storage 2), and had to change the workgroup name (since the Maxtor could not handle the "@") character.
After I changed the workgroup name on all computer, the vista cannot find my shared printer, neither any of the other computers on my network. The XP machines do not see the vista either. I have internet access from the vista, but cannot print or do backup to the NAS. So far I tried:.................
I've got 2 Vista laptops. Both on Home Premium. One of them is sharing a usb Lexmark 8300 printer. The other one can see the shared resources and connect to that printer but it can't print. No error messages whatsoever. After printing a test page I can see number 1 next to the printer status but when I double click the printer the print job is not there. Both the computers are in the same workgroup. Both have Printer Sharing enabled in Network and Sharing Center. On the computer that's sharing the printer the Everyone group was given full access. All paper set to A4 on both of them.
View 4 Replies View RelatedXP Pro x32 cannot print to Vista Ultimate x64 Shared Printer
1). XP Pro 32 node can see Vista Ultimate 64 Shared Printer
2). Right Click Vista Ultimate 64 Shared Printer From XP Pro 32. No Printer Driver Installed Installed Printer Driver no reboot and then tried reboot Test Page create Widows Error..........
I have an hp PSC 750 connected to an XP machine. I am trying to print via wireless connection from my Vista machine. I have installed the printer on Vista, I have it selected as the default printer and it's status is Ready but when I print to it nothing happens, no error message or anything. This setup worked previously XP-XP, I replaced the remote XP machine with a new Vista machine.
View 4 Replies View RelatedI have a home network set up with one computer serving as the Server for the house, it is running Vista Ultimate x64. All the printers are connected to that computer and are shared. The server also contains all of our movies and music for the house. I have several computers connected to it ranging from Vista Home Premium x86 to Vista Ultimate x64. Now for some reason I am only able to print to the printer when I am logged in on an account with the exact name and password as the one that I made on the server. Any other account I just get an error in the printer queue. So I figured I just needed to set up everyone with a user name and password on the server. I did that and the same thing is happening. I've checked the security tab on the printer and set Everyone to have full control over the printer. Printer sharing is enabled on the server and I'm adding the printer to the other computers via local port "\SERVERColour Laser". So I have no idea what else it could be. I'm also installing both x86 and x64 drivers on the server and the proper ones on the client computers.
So to recap. I have:
Server - Windows Vista Ultimate x64
Printer 1 - HP Laser CP1215
Printer 2 - HP Deskjet 5550
Computer 1 - Windows Vista Ultimate x64
Computer 2 - Windows Vista Ultimate x86
Computer 3 - Windows Vista Home Premium x86
Computer 4 - Windows Vista Home Premium x86
Each computer has one common user name and password, "Tyler", I can successfully print from any computer while on that account. However I am unsuccessful in printing from any other account. I am about to lose some hair over this.
Background before the question: I work for an architecture firm and are the test subjects to upgrading because we are the graphics department with all the programs that hog memory and have all the 64-bit programs... Adobe Photoshop CS4, 3DS Max 2009 and Revit 2008. I recently upgraded my machine to Vista Business x64 and all my co-workers except for one other (who also upgraded with me to Vista Business x64) are all on XP x86 machines.
we have problems with the network printers that are shared on a server machine. Issue is, everyone can print all day til we print out something. (Yes, are machine recognize the printers... it is not a I can't see them or are they shared on the server). After it stops everyone, we can keep on printing ourselves. The only way to fix it is to reset the server machine to recognize the printer again.Is there any local fix from the take over from happening... or is it on the server machine? Actually, what is the fix? Currently are work around is to jump on a computer that hasn't been used by anyone for years (XP x86) to print.
I have a dell inspiron 1525 running Vista home premium connected to a wireless network router wirelessly for use of the internet, i also have a dell PC downstairs (XP) which is connected to the same router with a wireless USB stick thing. The PC downstairs has a printer connected to it in the USB port. How can i use the printer from my laptop, do i need to set up some sort of home network? how do i go about printing on the printer downstairs from my laptop upstairs?
View 5 Replies View RelatedI have an HP L7680 installed on my home network. I have drivers set up for it on my Vista Ultimate desktop and my XP notebook. All has been working well for a couple of months. A day or two ago the printer stopped printing from the Vista machine. I get no error messages. The print jobs just sit in the queue. I have hard coded an IP address for the printer, and it is still correct. I can connect to the printer's configuration page over the network using the IP address. I can still print to the printer from the notebook running XP--no problems. I can also print to a USB-connected printer on the Vista machine.
View 4 Replies View RelatedI updated the driver but it just does not print. i dont even get an error message.
View 4 Replies View RelatedI have an XP Pro PC on my home network and am trying to connect to a Lexmark X215 printer that is shared off of the XP Pro machine. I am connecting with a new Vista Home Premium Dell XPS M1530 laptop. The rest of the network is working fine - shared files, folders, access to the Internet, etc.
The message I get when I try to connect is that Windows cannot connect to the printer.
My situation is I have a home network with one desktop running XP Home, attached to a wireless router by CAT5 cable and a local Epson printer. The Epson printer was shared as a network printer. I have another NEC notebook, which accessing the network very fine through the WiFi, and can print properly. I just purchased a new Sony notebook that run Vista Business. I set up the network as follows :
Workgroup : checked and was the same as my desktop
Network : Private
Printer sharing : On
File sharing : On
I can see my desktop in the network map. The notebook can browse the internet by using IE without any problem. However, I cannot add the network printer. I choose "Add new printer", and choose "add new network printer", the result is no network printer found. I also try to add new local printer, and build a new port, and key in my shared printer location "\Zeeman_DesktopeemanEpson", but got the response that the port is not correct.
I have found hundreds of threads on not being able to install a printer on an XP to a Vista machine, but not one about my problem. Home pear to pear workgroup network. 1 Vista Ultimate 64 bit, 2 XP Pro's, 2 XP Home. Lexmark Z600 printer hung off of the Vista PC. Working fine. Trying to use this Lexmark printer as the main printer for one of the XP Home PC's. From the XP Home PC can see the Vista share printer.
When installing, told that this is not the correct print driver & does not install. Solution 1 - Tried installing the standard XP 32 bit driver for this printer on the Vista PC so that the XP machine can download that driver during shared install. Vista says this tyep driver is not correct and will not allow me to install it for network sharing.............
Some websites have a 'printer-friendly' button which opens a new page with the text but not the graphics, so it can be printed more easily. Unfortunately, most don't! Is there a way of printing a website's text without all the graphics?
View 7 Replies View RelatedMy printer is printing out half of the one page. It stops prinhting in the middle of a page and goes to the next page. It stops printing after only finishing the top half of a sentence. I got it to work once. I'm also having an issue with my mouse and keyboard. The mouse will sometimes click a second time and the keyboard will get stuck on the last key for like 3 seconds.
View 4 Replies View RelatedI am running Windows Vista on my laptop and Windows XP on my home computer to which the shared printers are connected. When attempting to connect to shared printer from my laptop, I get the following error "Windows cannot connect. Access is denied" What am I doing wrong?
View 7 Replies View RelatedI have a Windows XP Home desktop connected to a printer via USB and, I have a Windows Vista Premium laptop connected through a wireless network. Print jobs initiated from the laptop hang up in the print queue with a print error, and also show up on the desktop under the print jobs as a print error. Print jobs iniated from the desktop work just fine. Please help with a solution to my wireless network printing problem.
View 5 Replies View RelatedI've had a problem with Vista 32bit for quite a while now. This happened before and after Sp1. Basically, if I connect to a remote share and attempt to copy a file to the pc/server, i'll get a bluescreen after a few seconds. I can't remember the exact file referenced in the crash (I can recreate it and get it). This also happens when I attempt to connect to a shared printer. SP1 didn't make a difference. Anyone have any ideas or heard of similar vista behavior?
View 4 Replies View RelatedI originally posted this 6-24 on only the Vista Printer_fax_scan NG with no response. Multiposted now to broaden the range of people seeing the post. Really need assistance. TIA.
I have a laptop (new HP) with Vista Home Premium SP1 preinstalled, 3 GB RAM,250GB HDD, AMD Turion 64 processor. Using Zone Alarm free as firewall and AVG 8 free as antivirus. Know that firewall is not issue since have full access to printers (can ping the network connected printers) and all other networked computers without problem. I understand that AVG has had a printing issue in the past but I totally turned off AVG by uninstalling itand this did not clear the issue with printing.
Out of the box I have connected the new laptop to the following printers using the latest drivers available from the manufacturers or using Vista's built in if the drivers aren't available from manufacturer's web site.
The following are connected through the home network via wireless and work flawlessly with 3 laptops running XP Pro (2) and XP Home (1).HP 2200DN - B & W Laser (network with Cat5e cable through WAP/Switch) OKIDATA 5150 - Color laser (network with Cat5e cable through WAP/Switch)Epson 1280 (connected through a Sony XP computer share) Epson R260 (also connected through the Sony XP computer)
The last printer is a Canon BJC80 which is connected via a USB to Parallel printer cable (Belkin) which works great with no delay on any of the laptops running XP.
I have Canon BJC-2000 Injet printer. It always worked perfectly with Vistas. Now since I changed the ink cartridges, it won't work. I send the print job and in the print queue is says "error - printing" and that's it.
View 9 Replies View RelatedI?m trying to install a network printer on a Vista machine. Vista is able to locate the printer on the network but when I select it for installation, for some time, Vista tries to connect and then pops up this message: "Failed Connecting to Printer - Access Denied" And then another window pops up with this message: "Spooler Subsystem Application stopped woring and has been closed." In fact the spooler service always stops, so I have to restart it on the services windows, within Administrative Tools of the Control Panel. The machine is new and has been installed yesterday. Everything else works fine. The printer I am trying to install is on a Windows XP Professional machine within the same network (naturally).
View 9 Replies View RelatedI have a Dell PC with XP Home and a Dell A960 Printer attached to it. I also have a new HP Laptop with Vista premium that has also had the same printer attached to it at times so the drivers are installed on HP laptop. I recently installed a router so I can use laptop wirelessly. That works fine. However, I am unable to print to the host printer wirelessly. I get message saying printer cannot communicate with computer. I tried everything I found on Google searches. I have enabled printer sharing on both. Do I have to make the Workgroup names the same and if so do I change the Dell with XP or the HP with Vista? I changed the Dell once to no avail so I changed back. Do computer names have to be same? I am a novice at networking.
View 6 Replies View RelatedDose anyone knows if they make a printer cable: I received a new lab top and it didn't come with the older printer jack on the computer. I guess I need to use one of the usb ports? My Epson 660 still works I hate the idea of getting a new printer when my old one works.
View 4 Replies View RelatedJust installed Vista SP2. Everything seems to work OK except for my Dell 1720 printer. It now prints an extra page before the actual document to be printed. There are just a few spurious characters printed at the top of this unwanted page. The following "proper" pages are OK. I have, so it seems, the lastest driver available.
View 7 Replies View RelatedI cannot set the default printer in Vista Business with SP1. I am connected to a domain trying to set a network printer hosted from a server as the default printer. I have seen a dozen or more questions similiar to this in this group as well as on other forums and found no answer. I see a MS-MVP come on and tell people to remove local printers such as the XPS and adobe printers. This is a ridiculous solution. Sure it may allow you to connect to a network printer but you have removed printers that you are going to need to use again. Unacceptable.
So far the only other solution that does not include deleting all the local printers off of the machine is to make sure you have write permissions to the default printer registry key. I have checked this and I do have write permissions(Full Control). SO WHAT NEXT? IS MICROSOFT EVER GOING TO COME OUT WITH ANOTHER FIX FOR THIS?
i have installed a printer from my main pc which uses xp pro to my new vista lap top ----- it shows the icon for the printer in the tray but i cannot still print any thing
View 7 Replies View Related