I have a Windows XP Home desktop connected to a printer via USB and, I have a Windows Vista Premium laptop connected through a wireless network. Print jobs initiated from the laptop hang up in the print queue with a print error, and also show up on the desktop under the print jobs as a print error. Print jobs iniated from the desktop work just fine. Please help with a solution to my wireless network printing problem.
View 5 RepliesI've had a problem with Vista 32bit for quite a while now. This happened before and after Sp1. Basically, if I connect to a remote share and attempt to copy a file to the pc/server, i'll get a bluescreen after a few seconds. I can't remember the exact file referenced in the crash (I can recreate it and get it). This also happens when I attempt to connect to a shared printer. SP1 didn't make a difference. Anyone have any ideas or heard of similar vista behavior?
View 4 Replies View RelatedNo vista home premium x64 printer driver for Toshiba e-studio 150 copier/printer. Searched for hours. Other than copying files to a networked computer, isn't there some kind of workaround possible through networking so I can just shoot stuff directly to the printer? (Of course the normal networked printer routine won't work without a Vista 64 driver). Also tried Vmware virtual machine but it says the printer is trying to scan when it's not, probably because Vista won't stop trying to communicate with it. (ms virtual pc doesn't work on vista home premium x64).
Printer is too expensive to become a paperweight. user Russell found this workaround for another printer...Found this on google while working on this issue myself and came back to post what I got working. Setup the port as LPR, queue name print with byte counting on. Use the built in x64 2k3 driver for the Ricoh Aficio AP3800C PS. So far I have Color, Duplexing, Tray options working properly with this driver, but the finisher doesn't want to staple... better than it being a large paperweight though.
Problem:
1) Extremely slow shared printer response
2) application nonresponsive while printing
Network Topography:
1 Vista Home Premium 32 PC
1 Vista Home Premium 64 PC
Cisco SD2008 Switch
1 HP 4050 Laserjet (Parallel connected to Vista 32 Machine above)
Configuration of Printer:
Connected via parallel to Vista 32 machine
Printer is configured for sharing and is installed on both machines
test pages print successfully from both machines
Additional notes:
During printer setup on the Vista 32 machine, I attempted to install
additional 64x drivers, but could not locate them, so I skipped this step.
During printer setup on the Vista 64 machine, the shared printers were
identified successfully, and I added the network printer. I was not asked to
install drivers the way I have in the past when adding a local printer.
Printing using the shared printer on the local machine Vista 32 performs
with normal speeds. Printing from the network computer Vista 64 using the
shared printer installed on Vista 32 is extremely slow. Even typing in print
job changes in the print dialog window takes 30 seconds or so for each key
stroke to register a response onscreen.
Vista Home premuim. Network settings correct on both PCs. From Vista I can ping the XP by IP address and by Computer name. From Vista I can map a drive on the XP using either IP or computer name. However In Network XP PC name is present but double-click says no access.Shared printer on XP is not found by Vista Add Printer. XP can see Vista in Network Places and double-click shows shared folders.
View 6 Replies View RelatedConfiguration: HP Laptop with Vista Home Premium, Compaq desktop with XP home and Epson Rx500 USB printer shared, Dell desktop with XP home. All in same WORKGROUP. Symptom: XP systems print to RX500 OK. When adding printer to Vista, sees RX500 but get error message after "Connecting to RX500" box. Error messsage says Windows cannot connect to the printer. Access is denied.
View 9 Replies View RelatedI have troubles getting my laserjet 1018 to work with my Vista Home laptop. The printer is set up to my desktop computer wich runs Vista Ultimate and i have shared it in the network. Everything works alright until I adds the printer on my laptop. After that I can't print from any of the computers and the printer que just fills up and i can't empty it. If i reinstall the printer drivers on the desktop computer its start working there again but I cant get it to work propely when i have installed it on the laptop.
View 5 Replies View RelatedI have a Vista computer and an XP computer. Both are on a domain. I have an HP Laserjet 1018 printer attached and installed locally on the Vista computer. The printer is shared and is added to the XP computer. When printing from XP to the laserjet printer on Vista it acts like it goes..no errors but nothing comes out. However, if you restart the print spooler then the jobs start printing. The printer works fine when printing from the Vista machine but not when you try to print from other computers on the network. Anyone know how to resolve this without having to restart the print spooler all the time? Drivers have been reinstalled and that does not help.I also tried removing the printer. Re-adding it. Sharing it again and re-adding it to other hosts on the network....same issue.
View 5 Replies View RelatedI checked out many forums and seen many others with the same or similar problems. I tried all the suggested solutions with no results. I have a home network with 3 XP computers and a Vista laptop (Lenovo x60) running Vista Business. The network using both wired and wireless connections. I installed a NAS (Maxtor Shared Storage 2), and had to change the workgroup name (since the Maxtor could not handle the "@") character.
After I changed the workgroup name on all computer, the vista cannot find my shared printer, neither any of the other computers on my network. The XP machines do not see the vista either. I have internet access from the vista, but cannot print or do backup to the NAS. So far I tried:.................
I've got 2 Vista laptops. Both on Home Premium. One of them is sharing a usb Lexmark 8300 printer. The other one can see the shared resources and connect to that printer but it can't print. No error messages whatsoever. After printing a test page I can see number 1 next to the printer status but when I double click the printer the print job is not there. Both the computers are in the same workgroup. Both have Printer Sharing enabled in Network and Sharing Center. On the computer that's sharing the printer the Everyone group was given full access. All paper set to A4 on both of them.
View 4 Replies View RelatedXP Pro x32 cannot print to Vista Ultimate x64 Shared Printer
1). XP Pro 32 node can see Vista Ultimate 64 Shared Printer
2). Right Click Vista Ultimate 64 Shared Printer From XP Pro 32. No Printer Driver Installed Installed Printer Driver no reboot and then tried reboot Test Page create Widows Error..........
I have an hp PSC 750 connected to an XP machine. I am trying to print via wireless connection from my Vista machine. I have installed the printer on Vista, I have it selected as the default printer and it's status is Ready but when I print to it nothing happens, no error message or anything. This setup worked previously XP-XP, I replaced the remote XP machine with a new Vista machine.
View 4 Replies View RelatedI have a home network set up with one computer serving as the Server for the house, it is running Vista Ultimate x64. All the printers are connected to that computer and are shared. The server also contains all of our movies and music for the house. I have several computers connected to it ranging from Vista Home Premium x86 to Vista Ultimate x64. Now for some reason I am only able to print to the printer when I am logged in on an account with the exact name and password as the one that I made on the server. Any other account I just get an error in the printer queue. So I figured I just needed to set up everyone with a user name and password on the server. I did that and the same thing is happening. I've checked the security tab on the printer and set Everyone to have full control over the printer. Printer sharing is enabled on the server and I'm adding the printer to the other computers via local port "\SERVERColour Laser". So I have no idea what else it could be. I'm also installing both x86 and x64 drivers on the server and the proper ones on the client computers.
So to recap. I have:
Server - Windows Vista Ultimate x64
Printer 1 - HP Laser CP1215
Printer 2 - HP Deskjet 5550
Computer 1 - Windows Vista Ultimate x64
Computer 2 - Windows Vista Ultimate x86
Computer 3 - Windows Vista Home Premium x86
Computer 4 - Windows Vista Home Premium x86
Each computer has one common user name and password, "Tyler", I can successfully print from any computer while on that account. However I am unsuccessful in printing from any other account. I am about to lose some hair over this.
Background before the question: I work for an architecture firm and are the test subjects to upgrading because we are the graphics department with all the programs that hog memory and have all the 64-bit programs... Adobe Photoshop CS4, 3DS Max 2009 and Revit 2008. I recently upgraded my machine to Vista Business x64 and all my co-workers except for one other (who also upgraded with me to Vista Business x64) are all on XP x86 machines.
we have problems with the network printers that are shared on a server machine. Issue is, everyone can print all day til we print out something. (Yes, are machine recognize the printers... it is not a I can't see them or are they shared on the server). After it stops everyone, we can keep on printing ourselves. The only way to fix it is to reset the server machine to recognize the printer again.Is there any local fix from the take over from happening... or is it on the server machine? Actually, what is the fix? Currently are work around is to jump on a computer that hasn't been used by anyone for years (XP x86) to print.
I have an XP Pro PC on my home network and am trying to connect to a Lexmark X215 printer that is shared off of the XP Pro machine. I am connecting with a new Vista Home Premium Dell XPS M1530 laptop. The rest of the network is working fine - shared files, folders, access to the Internet, etc.
The message I get when I try to connect is that Windows cannot connect to the printer.
My situation is I have a home network with one desktop running XP Home, attached to a wireless router by CAT5 cable and a local Epson printer. The Epson printer was shared as a network printer. I have another NEC notebook, which accessing the network very fine through the WiFi, and can print properly. I just purchased a new Sony notebook that run Vista Business. I set up the network as follows :
Workgroup : checked and was the same as my desktop
Network : Private
Printer sharing : On
File sharing : On
I can see my desktop in the network map. The notebook can browse the internet by using IE without any problem. However, I cannot add the network printer. I choose "Add new printer", and choose "add new network printer", the result is no network printer found. I also try to add new local printer, and build a new port, and key in my shared printer location "\Zeeman_DesktopeemanEpson", but got the response that the port is not correct.
I have found hundreds of threads on not being able to install a printer on an XP to a Vista machine, but not one about my problem. Home pear to pear workgroup network. 1 Vista Ultimate 64 bit, 2 XP Pro's, 2 XP Home. Lexmark Z600 printer hung off of the Vista PC. Working fine. Trying to use this Lexmark printer as the main printer for one of the XP Home PC's. From the XP Home PC can see the Vista share printer.
When installing, told that this is not the correct print driver & does not install. Solution 1 - Tried installing the standard XP 32 bit driver for this printer on the Vista PC so that the XP machine can download that driver during shared install. Vista says this tyep driver is not correct and will not allow me to install it for network sharing.............
I am running Windows Vista on my laptop and Windows XP on my home computer to which the shared printers are connected. When attempting to connect to shared printer from my laptop, I get the following error "Windows cannot connect. Access is denied" What am I doing wrong?
View 7 Replies View RelatedI?m trying to install a network printer on a Vista machine. Vista is able to locate the printer on the network but when I select it for installation, for some time, Vista tries to connect and then pops up this message: "Failed Connecting to Printer - Access Denied" And then another window pops up with this message: "Spooler Subsystem Application stopped woring and has been closed." In fact the spooler service always stops, so I have to restart it on the services windows, within Administrative Tools of the Control Panel. The machine is new and has been installed yesterday. Everything else works fine. The printer I am trying to install is on a Windows XP Professional machine within the same network (naturally).
View 9 Replies View RelatedI cannot set the default printer in Vista Business with SP1. I am connected to a domain trying to set a network printer hosted from a server as the default printer. I have seen a dozen or more questions similiar to this in this group as well as on other forums and found no answer. I see a MS-MVP come on and tell people to remove local printers such as the XPS and adobe printers. This is a ridiculous solution. Sure it may allow you to connect to a network printer but you have removed printers that you are going to need to use again. Unacceptable.
So far the only other solution that does not include deleting all the local printers off of the machine is to make sure you have write permissions to the default printer registry key. I have checked this and I do have write permissions(Full Control). SO WHAT NEXT? IS MICROSOFT EVER GOING TO COME OUT WITH ANOTHER FIX FOR THIS?
I use Vista Home Premium. I have a network that connects one computer by cable and 3 computer by wireless. I also have a LaserJet 4 Plus. It has an adapter card that is connected to the router/modem by cable. I have gone thru the 'Add Printer' procedure several times. It 'finds' a TCP/IP 'generic adapter card and, after awhile, a list of printers is displayed. I select mine. Give it a shared name and click on 'print test page.' Nothing happens. I used to have a Netgear modem but switch to AT&T wireless router. I am unable to find a list of attached devices and their IP address.
View 4 Replies View RelatedNetwork fully operational - Public Folder on Vista can be shared on XP - no problem BUT when I attempt to share another folder on Vista it requests username. Options include username on Vista, Guest, Everyone or Add name. It appears that Vista cannot see usernames on XP. Do I have to add these usernames to the Vista computer? I think the 'everyone' option applies only to 'Domains' which are not recognised on XP.
View 4 Replies View Relateda friend has a new sony vaio with vista home premium installed. For some reason it will not connect to my netgear router wirelessly. I have tried everything. I am however not too hot on Vista as this is my first time with it. The adaptor says its on, but when you interegate it and ask why it wont connect it keeps telling me "switch on wireless adaptor capability". In the network connections it is on, the switch on the front right is swiitched on and the wireless network light on the front is on. The network is fine and working as i have my laptop connected to it. All security is present and entered. It seems to be the computer as it doesnt find any networks when there are loads in the area. Am i missing something exceptionally obvious? Does Vista have another "on" switch for this adaptor?
View 5 Replies View RelatedONly 24 hrs into using Vista. I have added my Vista PC to my Home Network. I am trying to access the shared folder on my old PC that is showing on the network but I am denied access. I did have a password/user account set up on the old machine but have removed the password now. How can I access the shared folder across the network?
View 9 Replies View RelatedI am Vista Home Premium SP1. When connected to the network, I can not send problem Reports, the Help has Xs through the images, and I can not connect to other shared devices. I can go online to bing.com and several other websites. But I can not download java or flash updates, it says I do not any an internet connection. I also can not download any new Microsoft updates. If I install IE8, then the browser can no longer go online. AVG is the only ant-virus installed, and the firewalls are turned off. The machine can not be formated and reinstalled
View 7 Replies View RelatedTrying to network XP pro with Vista Ultimate. I installed the LLtd Responder patch on XP. When i go to network map on vista I can see the XP machine but can not browse shared files or even click on the icon for it? I can't get the XP machine to see vista. Both have the same workgroup name. What am i doing wrong?
View 5 Replies View RelatedI'm trying to get my network to function with my Vista x64 laptop. The network has 4 computers total: 3 XP machines, and the Vista Laptop. The three XP machines don't have any issues sharing files. However, I cannot view any XP computers at all on the Vista machine, and I cannot see any of the Vista Shared Folders from my Xp desktop. (I can see the Vista machine on the XP one, but expanding it shows no folders shared.
Rt-click -> explore results in an error: "\Studio72 is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The network path was not found.") I am only able to run ipconfig, net config and browstat info on my XP desktop and my Vista Laptop, as the other two machines are my roommate's desktop, and our little security computer (it just records a webcam set on our front door when we're not home in case someone breaks in)..............
I have a user with a french vista laptop. Every other person are joined to the domain and can view other systems (boths XP and Vista) on the network. They can share files and access shared drive. This user however is not joined to the domain and can view any other system on the network. He can view but not access other vista systems. he cannot ping any system on the network and cannot access any shared drive. He can however access network printer. I will like him to be able to access te shared drive, how do i go about it?
View 4 Replies View RelatedVista Ultimate SP2 32 Bit. I would like to know if it is possible to subscribe to a shared Windows = Calendar on one machine by all my machines across my home network by = subscribing to the one Calendar .ICS.
I have shared the Windows calendar on the one machine and published the = calendar to a folder on my Data drive that is accessible to all machines = via the home network. The other drives on the same machine can access = the calendar by subscribing to it. But, when I tried to subscribe to = that ics file from one of the other machines via the home network it = does not work. It can access the folder and file, but, it will not = subscribe to it when I enter it into the subscription line.=20 What do I need to do to be able to share this published calendar by all = the machines. They each have the same version of Vista installed.=20
My computer is a Dell XPS 420, Vista Home Premium, my account has administrator privileges. My wife's computer is a Dell Dimension E520, Vista Ultimate, her account has admin privileges. We run OneCare Live for all security and backup needs. I installed a network backup using a Linksys NLSU2 and, up till yesterday had a 320 GB TrekStor HD as the backup device. I disconnected the TrekStor and now have a LaCie 1TB HD. Prior to connecting it to the NLSU2 I connected the new HD to my computer and ran the setup. Formatted the drive to NTFS. I connected it to the network and ran a OneCare backup from my computer. Worked just fine. This morning I tried a backup from my wife's computer and it fails (asking for a log on). On my computer I can navigate to the drive, to the HD and to the folders and subfolders. On her computer I can do the same. However when I look at the Properties for the shared network folder on the HD there are 3 accounts : Everyone; everyone (LKG..everyone); and guest (LKG...guest) (LKG... is the prefix for the NLSU2).
View 6 Replies View Relatedusing the laptop through wireless I can see other computer and even list their shared folders but when I try to actually list files the connection timesout and gives an error os dennied access to the shared folder. If I try to use VNC for instance, the client connects, asks for pass and then after the remote screen starts to appear.. it hangs... no response after that . The strange part of the problem is that if I connect the laptop through a wired connection everything works ok I access shared folders, I print remotely, no problems. I tried a number of things , the most obvious, like firewalls diferent settings on the network etc. What I can't figure out is what can be so different in the PC for the wired to work but not the wireless.
View 9 Replies View Related