Bluescreen: Shared Printer Connection Not Work
May 8, 2008
I've had a problem with Vista 32bit for quite a while now. This happened before and after Sp1. Basically, if I connect to a remote share and attempt to copy a file to the pc/server, i'll get a bluescreen after a few seconds. I can't remember the exact file referenced in the crash (I can recreate it and get it). This also happens when I attempt to connect to a shared printer. SP1 didn't make a difference. Anyone have any ideas or heard of similar vista behavior?
View 4 Replies
ADVERTISEMENT
Mar 25, 2008
I have a Windows XP Home desktop connected to a printer via USB and, I have a Windows Vista Premium laptop connected through a wireless network. Print jobs initiated from the laptop hang up in the print queue with a print error, and also show up on the desktop under the print jobs as a print error. Print jobs iniated from the desktop work just fine. Please help with a solution to my wireless network printing problem.
View 5 Replies
View Related
Jul 29, 2009
Problem:
1) Extremely slow shared printer response
2) application nonresponsive while printing
Network Topography:
1 Vista Home Premium 32 PC
1 Vista Home Premium 64 PC
Cisco SD2008 Switch
1 HP 4050 Laserjet (Parallel connected to Vista 32 Machine above)
Configuration of Printer:
Connected via parallel to Vista 32 machine
Printer is configured for sharing and is installed on both machines
test pages print successfully from both machines
Additional notes:
During printer setup on the Vista 32 machine, I attempted to install
additional 64x drivers, but could not locate them, so I skipped this step.
During printer setup on the Vista 64 machine, the shared printers were
identified successfully, and I added the network printer. I was not asked to
install drivers the way I have in the past when adding a local printer.
Printing using the shared printer on the local machine Vista 32 performs
with normal speeds. Printing from the network computer Vista 64 using the
shared printer installed on Vista 32 is extremely slow. Even typing in print
job changes in the print dialog window takes 30 seconds or so for each key
stroke to register a response onscreen.
View 9 Replies
View Related
Jul 27, 2008
Vista Home premuim. Network settings correct on both PCs. From Vista I can ping the XP by IP address and by Computer name. From Vista I can map a drive on the XP using either IP or computer name. However In Network XP PC name is present but double-click says no access.Shared printer on XP is not found by Vista Add Printer. XP can see Vista in Network Places and double-click shows shared folders.
View 6 Replies
View Related
Mar 23, 2008
Configuration: HP Laptop with Vista Home Premium, Compaq desktop with XP home and Epson Rx500 USB printer shared, Dell desktop with XP home. All in same WORKGROUP. Symptom: XP systems print to RX500 OK. When adding printer to Vista, sees RX500 but get error message after "Connecting to RX500" box. Error messsage says Windows cannot connect to the printer. Access is denied.
View 9 Replies
View Related
Mar 23, 2008
I have troubles getting my laserjet 1018 to work with my Vista Home laptop. The printer is set up to my desktop computer wich runs Vista Ultimate and i have shared it in the network. Everything works alright until I adds the printer on my laptop. After that I can't print from any of the computers and the printer que just fills up and i can't empty it. If i reinstall the printer drivers on the desktop computer its start working there again but I cant get it to work propely when i have installed it on the laptop.
View 5 Replies
View Related
Mar 23, 2008
I have a Vista computer and an XP computer. Both are on a domain. I have an HP Laserjet 1018 printer attached and installed locally on the Vista computer. The printer is shared and is added to the XP computer. When printing from XP to the laserjet printer on Vista it acts like it goes..no errors but nothing comes out. However, if you restart the print spooler then the jobs start printing. The printer works fine when printing from the Vista machine but not when you try to print from other computers on the network. Anyone know how to resolve this without having to restart the print spooler all the time? Drivers have been reinstalled and that does not help.I also tried removing the printer. Re-adding it. Sharing it again and re-adding it to other hosts on the network....same issue.
View 5 Replies
View Related
Sep 29, 2007
I checked out many forums and seen many others with the same or similar problems. I tried all the suggested solutions with no results. I have a home network with 3 XP computers and a Vista laptop (Lenovo x60) running Vista Business. The network using both wired and wireless connections. I installed a NAS (Maxtor Shared Storage 2), and had to change the workgroup name (since the Maxtor could not handle the "@") character.
After I changed the workgroup name on all computer, the vista cannot find my shared printer, neither any of the other computers on my network. The XP machines do not see the vista either. I have internet access from the vista, but cannot print or do backup to the NAS. So far I tried:.................
View 8 Replies
View Related
Aug 25, 2009
I've got 2 Vista laptops. Both on Home Premium. One of them is sharing a usb Lexmark 8300 printer. The other one can see the shared resources and connect to that printer but it can't print. No error messages whatsoever. After printing a test page I can see number 1 next to the printer status but when I double click the printer the print job is not there. Both the computers are in the same workgroup. Both have Printer Sharing enabled in Network and Sharing Center. On the computer that's sharing the printer the Everyone group was given full access. All paper set to A4 on both of them.
View 4 Replies
View Related
Jun 23, 2008
XP Pro x32 cannot print to Vista Ultimate x64 Shared Printer
1). XP Pro 32 node can see Vista Ultimate 64 Shared Printer
2). Right Click Vista Ultimate 64 Shared Printer From XP Pro 32. No Printer Driver Installed Installed Printer Driver no reboot and then tried reboot Test Page create Widows Error..........
View 4 Replies
View Related
Mar 24, 2008
I have an hp PSC 750 connected to an XP machine. I am trying to print via wireless connection from my Vista machine. I have installed the printer on Vista, I have it selected as the default printer and it's status is Ready but when I print to it nothing happens, no error message or anything. This setup worked previously XP-XP, I replaced the remote XP machine with a new Vista machine.
View 4 Replies
View Related
Feb 8, 2009
I have a home network set up with one computer serving as the Server for the house, it is running Vista Ultimate x64. All the printers are connected to that computer and are shared. The server also contains all of our movies and music for the house. I have several computers connected to it ranging from Vista Home Premium x86 to Vista Ultimate x64. Now for some reason I am only able to print to the printer when I am logged in on an account with the exact name and password as the one that I made on the server. Any other account I just get an error in the printer queue. So I figured I just needed to set up everyone with a user name and password on the server. I did that and the same thing is happening. I've checked the security tab on the printer and set Everyone to have full control over the printer. Printer sharing is enabled on the server and I'm adding the printer to the other computers via local port "\SERVERColour Laser". So I have no idea what else it could be. I'm also installing both x86 and x64 drivers on the server and the proper ones on the client computers.
So to recap. I have:
Server - Windows Vista Ultimate x64
Printer 1 - HP Laser CP1215
Printer 2 - HP Deskjet 5550
Computer 1 - Windows Vista Ultimate x64
Computer 2 - Windows Vista Ultimate x86
Computer 3 - Windows Vista Home Premium x86
Computer 4 - Windows Vista Home Premium x86
Each computer has one common user name and password, "Tyler", I can successfully print from any computer while on that account. However I am unsuccessful in printing from any other account. I am about to lose some hair over this.
View 4 Replies
View Related
Mar 26, 2009
Background before the question: I work for an architecture firm and are the test subjects to upgrading because we are the graphics department with all the programs that hog memory and have all the 64-bit programs... Adobe Photoshop CS4, 3DS Max 2009 and Revit 2008. I recently upgraded my machine to Vista Business x64 and all my co-workers except for one other (who also upgraded with me to Vista Business x64) are all on XP x86 machines.
we have problems with the network printers that are shared on a server machine. Issue is, everyone can print all day til we print out something. (Yes, are machine recognize the printers... it is not a I can't see them or are they shared on the server). After it stops everyone, we can keep on printing ourselves. The only way to fix it is to reset the server machine to recognize the printer again.Is there any local fix from the take over from happening... or is it on the server machine? Actually, what is the fix? Currently are work around is to jump on a computer that hasn't been used by anyone for years (XP x86) to print.
View 4 Replies
View Related
Mar 23, 2008
I have an XP Pro PC on my home network and am trying to connect to a Lexmark X215 printer that is shared off of the XP Pro machine. I am connecting with a new Vista Home Premium Dell XPS M1530 laptop. The rest of the network is working fine - shared files, folders, access to the Internet, etc.
The message I get when I try to connect is that Windows cannot connect to the printer.
View 9 Replies
View Related
Mar 23, 2008
My situation is I have a home network with one desktop running XP Home, attached to a wireless router by CAT5 cable and a local Epson printer. The Epson printer was shared as a network printer. I have another NEC notebook, which accessing the network very fine through the WiFi, and can print properly. I just purchased a new Sony notebook that run Vista Business. I set up the network as follows :
Workgroup : checked and was the same as my desktop
Network : Private
Printer sharing : On
File sharing : On
I can see my desktop in the network map. The notebook can browse the internet by using IE without any problem. However, I cannot add the network printer. I choose "Add new printer", and choose "add new network printer", the result is no network printer found. I also try to add new local printer, and build a new port, and key in my shared printer location "\Zeeman_DesktopeemanEpson", but got the response that the port is not correct.
View 7 Replies
View Related
Mar 23, 2008
I have found hundreds of threads on not being able to install a printer on an XP to a Vista machine, but not one about my problem. Home pear to pear workgroup network. 1 Vista Ultimate 64 bit, 2 XP Pro's, 2 XP Home. Lexmark Z600 printer hung off of the Vista PC. Working fine. Trying to use this Lexmark printer as the main printer for one of the XP Home PC's. From the XP Home PC can see the Vista share printer.
When installing, told that this is not the correct print driver & does not install. Solution 1 - Tried installing the standard XP 32 bit driver for this printer on the Vista PC so that the XP machine can download that driver during shared install. Vista says this tyep driver is not correct and will not allow me to install it for network sharing.............
View 8 Replies
View Related
Mar 23, 2008
I am running Windows Vista on my laptop and Windows XP on my home computer to which the shared printers are connected. When attempting to connect to shared printer from my laptop, I get the following error "Windows cannot connect. Access is denied" What am I doing wrong?
View 7 Replies
View Related
Jun 19, 2009
In the network connection sharing, i see both me and my wifes laptop on the full map on her computer and my computer. I can not accessed shared files or desktop remote connection. I do have file sharing on and both computers are set on the same workgroup. All firewalls are configured and i've tried it with all firewalls turned off (vista firewall and gateway firewall).
View 7 Replies
View Related
Mar 23, 2008
using the laptop through wireless I can see other computer and even list their shared folders but when I try to actually list files the connection timesout and gives an error os dennied access to the shared folder. If I try to use VNC for instance, the client connects, asks for pass and then after the remote screen starts to appear.. it hangs... no response after that . The strange part of the problem is that if I connect the laptop through a wired connection everything works ok I access shared folders, I print remotely, no problems. I tried a number of things , the most obvious, like firewalls diferent settings on the network etc. What I can't figure out is what can be so different in the PC for the wired to work but not the wireless.
View 9 Replies
View Related
Jun 25, 2008
Is there a way to connect to network printers in Vista without using Active Directory for mulitiple users?
View 4 Replies
View Related
Sep 4, 2009
I have an HP Photosmart C6180 connected via USB to an XP desktop computer. I have other XP laptops set up so they can print to this printer throught their wireless connection. However I now have a new Vista laptop and I can't get it configured for this printer through it's wireless connection. Here is what I've tried: Go into Control panel/printers on the Vista Laptop and select Add New printer. I select Network printer and It finds the printer. I then select HP as the manufacturer and it list lots of their printers but not this one. I assume the driver was just not included with Vista. This also has a "have disk" option but my disk is only for XP and before.
I went to HP's site and downloaded the latest complete Vista driver (159 meg). I then ran the software install and when it asks for whether it is a local or network printer, I pick network. But the driver software can't find any network printers even thought Vista could in 1 above. 3. I went to HP's site and downloaded the latest complete Vista driver (159 meg) only this time I saved it instead or running it. Then from the Vista Laptop and selected Add New printer. I select Network printer and It finds the printer. This also has a "have disk" option so I point it to the saved download file but it won't accept it. Apparently this is because the downloaded file is an exe and the software at that point is looking for in ..inf file. So how can I get this to work?
View 4 Replies
View Related
Mar 23, 2008
i've spent the whole day trying to set up a wireless connection between a laptop running vista and a printer connected to a print server on a wireless router....The printer is connected to the USB port on the wireless router (and the wireless connection to the printer works fine with my old xp laptop :rolleyes. The printer worked fine when plugged directly into the usb port on the vista laptop. So I set up a TCP/IP local port with the router's IP address (network print server, 1 printer) and assigned the printer to that port. It worked! - once. It printed a short document from notepad but sometime in the next few hours its status went to 'offline' and it has since refused to print anything else. Print jobs appear to spool to the printer, come up in the print monitor window, etc, but it doesn't print - neither tiny things from notepad nor multipage word docs.
SO far I have tried: rebooting everything lots of times; setting the printer to 'use printer online' in the admin prefs; disabling bidirectional support; disabling spooling (i.e. printing direct to printer - this just makes MS Word hang); making a persistent mapping of LPT1 to the printer w net use (a bit out of my depth there so hope I haven't stuffed anything up, i just got a bunch of system error 66's).
View 4 Replies
View Related
Aug 30, 2008
I just got vista home premium and tried to copy pothos from my Dell924.. won't work. I downloaded the drivers and softwear for vista 32bit and installed but to no avale. I can print. Do just take a stick and whack it?
View 4 Replies
View Related
Jun 29, 2008
I got a new computer and tried to hook up the old printer. Everything downloaded but I continue to get a "problem communicating with printer" Everything is hooked up right abd I don't know how to get it to work
View 5 Replies
View Related
Mar 23, 2008
does anyone know why my printer which is a hp c series wont work on windows vista home premium, when you are asked to plug it in its says device unknown in a ballon in the taskbar and there is no way around this i have tried this without the cd and everything and tried using there website to install the printer, the printer is connect via usb 2 straight into the usb port on the back of the computer, anything else i try to plug in works and i have had no help so far if anyone out there could save my life please im sending out an sos
View 4 Replies
View Related
Jun 1, 2009
I have successfully networked my Vista Home Premium 64bit Dell laptop to my WinXP Pro PC and am able to transfer files back and forth. Now I'm trying to set up a HP 3390 USB printer that's attached to the WinXP Pro PC as a network printer, and print to it from the Vista laptop. When I try to setup the printer for networking, it seems that Vista wants a 64bit printer driver for it. Is that how network printers work?
IOW, do all USB peripherals like printers, scanners and memory card readers have to have Vista 64bit drivers to work with a networked Vista 64bit PC even though they are connected to a WinXP PC? This is not really a problem since HP does provide a 64bit Vista driver for the 3390 laser printer and also for my HP D5360 inkjet printer. But I just wanted verification of the above before I continue trying to get the printer working as a networked printer.
View 7 Replies
View Related
May 9, 2009
I am trying to connect my epson printer to the firewire port on my new 64-bit machine but it does not work. Epson has informed me that Vista64 does not support firewire and that I need to use USB. IS this true?
View 6 Replies
View Related
Mar 23, 2008
I have a simple home network set up at the office. There are 4 computers and 3 printers all hardwired. The three printers are all on 1 computer(XP OS) and connected via usb and serial/IEEE port. The problem is the laptop (Vista OS) because that computer doesn't see all the others and doesn't print even thought the printer is installed on the computer. The Vista laptop also has Norton on it. I am guessing that it is a firewall problem because Norton and Windows firewall are arguing with each other but I have no idea how to fix this.
View 4 Replies
View Related
Jun 3, 2008
No vista home premium x64 printer driver for Toshiba e-studio 150 copier/printer. Searched for hours. Other than copying files to a networked computer, isn't there some kind of workaround possible through networking so I can just shoot stuff directly to the printer? (Of course the normal networked printer routine won't work without a Vista 64 driver). Also tried Vmware virtual machine but it says the printer is trying to scan when it's not, probably because Vista won't stop trying to communicate with it. (ms virtual pc doesn't work on vista home premium x64).
Printer is too expensive to become a paperweight. user Russell found this workaround for another printer...Found this on google while working on this issue myself and came back to post what I got working. Setup the port as LPR, queue name print with byte counting on. Use the built in x64 2k3 driver for the Ricoh Aficio AP3800C PS. So far I have Color, Duplexing, Tray options working properly with this driver, but the finisher doesn't want to staple... better than it being a large paperweight though.
View 4 Replies
View Related
Mar 23, 2008
I bought a Lexmark 3400 series all in one printer. I have been using in with my desk top computer with Mcro. Offive and it has worked great. I recently purchased a lap-top with Vista. We loaded the printer program on to the lap-top and made it the default. When we go to print we get the message that the computer can not communicate with the printer.
View 4 Replies
View Related
Jul 8, 2007
I have a new Vista Premium 64, it has it's own driver for the above parallel port printer (about 10 years old!), which is installed. If you try to print the job will spool and sometimes the printer will spew out a blank page or two, but usually the printer just makes a noise to start up printing and then the power light just blinks, the job disappears from the print job window in vista
View 9 Replies
View Related
