Files Shown Can Not Accessed Externedl Drive Was Not Connected
Mar 5, 2009
I am puzzled. The Indexed locations shown when I press the show all locations button are Microsoft Outlook Start Menu and Users. Only Microsoft Outlook is checked. I was trying out the search facility above the start button on Vista to look for a program and was very surprised when up popped a selection of files that are stored on an external hard drive that I use from time to time as a secondary backup. The files shown have not been accessed recently and at the time of the search the external drive was not connected. Hovering the cursor over the files told me that they were located on this external drive. why these files would have shown up on the search as I have not chosen to have the external drive indexed?
In the network connection sharing, i see both me and my wifes laptop on the full map on her computer and my computer. I can not accessed shared files or desktop remote connection. I do have file sharing on and both computers are set on the same workgroup. All firewalls are configured and i've tried it with all firewalls turned off (vista firewall and gateway firewall).
My 10 month old computer is showing 98% full on "C" drive (64.4 GB installed, 1.41 GB left) I'm running Windows Vista Home Basic. I'm just very confused as to why it is almost full when I hardly have anything on it yet. I've cleaned it up the best I can and deleted all that I think I can and I've defragmented after-with little or no change.
I have in the desktop folder of my computer several files and shortcuts. One of them is called 'Internet Explorer'. But the icon corresponding to that name doesn't appear in the desktop!
When i delete files and pictures to my recycle bin, it never shows anything in there but its thereb to empty it, how can i change settings to show files that i put into bin.
i just bought My Book Essential 1 TB today... and when i got home i plug it and it works just fine but its bothering me that the HDD type is FAT32 .. so i format it and try to change it to NTFS.. but somethings happen and boom the electric in my apartment was down... and so when the electric back i want to format it again but i can't... there drive is detected but with no space detail... it says "Windows can't format Drive H: - Check to see that the disk and drive are connected properly, make sure that the disk is not read-only, and then try again.
For more information, search Help for read-only files and how to change them" when i open the Disk Management from (My COmputer > Manage) it seems it's already a volume.. but the weird thing there is no space detail.. and i cant erase the volume ... i've tried using diskpart but i can't do nothing because there is no volume and i can't erase the disk... no luck with fsutil cause its not ntfs... I havent tried 3rd party software and i havent tried it on other computer (don't have other computer right now) and WDC didnt give live cd for formatting because all of them was in the drive... though i already redownload it but the program is useless..
I have a laptop running Vista, my desktop is running XP, i want to be able to access files and the printer which is connected to the Xp machine on my vista laptop, but they cannot see each other. I have the file and printer sharing stuff turned on on the laptop. Also I am running AVG on both systems and I have the Windows firewall enabled on both. Both are connected to a D-link router, DESktop is wired, laptop is wireless. Also a friend of mine came over and has the same laptop as me except he is running XP on his and he had no problem seeing my desktop, or accessing its files.
I can share a drive, no problem. No one can actually touch any of the data on that drive unless I specifically share each item one by one. Is there a way to share a drive and automatically have EVERYTHING on that drive be accessible to network users?
I am Using Vista Ultimate 64. I would like to tranfer my entire drive incuding all files and the Operating system From my current IDE HDD to a new SATA Drive of the sames size (500 Gig) I need the IDE Drive for an older computer ( The 40 Gig IBM Deathstar still functions great, but all programs seem more bloated these Days)
Anyway I went to Administrative Tools and Formated the New Drive NFTS with no Drive Letter. But I cannot get it recognized as a transfer device when I go to system backup. Can I use 'C' on the second and soon to be only drive? If I have to use E or F for now can I change it back later. would that affect the file system? I intend to Low level Format the IDE and try cloning the old machine's XP Drive (32 bit) to it in the second place.
I have the 32bit version and the computer is no more than 2 weeks old. I have a feeling this may be a virus I have always been very careful with what I do on the tinterweb and generally look after the computer as best I can. I have been using Windows Defender firewall and AVG antivirus and spyware.
I downloaded a file last night, placed it inside My Documents> Downloads. I now have reason the believe its a virus. All in all the computer runs like a dream, but since downloading this file, whenever I go into my Documents, my CPU speed jumps up to around 50% and stays there, then If I go into my Downloads file within my documents, my CPU speed shoots up to 100% and hangs there until the computer is restarted? The file that was downloaded is the only file within the Downloads file. I'm 99.9% sure that whatever it is, its causing this problem. If for example I just turn the machine on and dont access my Docs, it runs fine and only slows down when my Documents is accessed. The file that was downloaded is 10mb's, whenever I try to delete it, the dialog just comes up saying calculating time remaining and doesnt budge. I have scanned my docuemnts and no virus was detected by AVG, I just want to get rid of this file but dont know how!
I'm trying to set up a wireless network between my Vista x64 PC and an XP laptop. Both running the latest service packs and updates etc. Nothing fancy, just trying to share my collection of music and videos with the laptop. Now, on both machines I can see each shared folder, but can't access them all for some reason. On the Vista pc I'm sharing "Videos" and "Music", and both appear on the XP laptop; however, while Music is brows-able and working fine, for some reason Videos cannot be accessed. I've checked and both Videos and Music have the exact same permissions etc., so I can't figure out why one is accessible and not the other.
I do not have Windows Installer at all. I get the following message:
The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact Support Personell.
I have con into Microsoft support and tried to download a Stand Alone Installer-didn't work because I don't have Windows Installer. Tried to download Windows Installer Redistributables for Windows 4.0 I have done a search for Windows Installer on my entire computer It is not listed at all in the System Configuration Utility I am running Vista Home Premium 32 bit Service Pack 2
I would like to just start all over and take of my programs and re-load but I don't have a hard copy disk for Vista Home Premium. It was installed when I purchased the computer. I don't know how to go into the sytem boot areas so haven't touched that. I have been in the registry just didn't do anything as was unsure of what to fix to allow access on the right side.
Since I ran a software called "Registry Clean expert v4.56" I can no longer install oruninstall any application on mt VISTA Ultimate machine.I tried everything that was explained in the Microsoft forums, such as:- running MSIEXEC /UNREGISTER followed with MSIEXEC /REGSERVERWhen I run services.msc I notice that the Windows Installer service is set to MANUAL.I tried to setup to AUTOMATIC, rebooted the machine, but the problem is still there.
I am trying to either remove or permenently stop IE from being accessed when I access the internet. I have another seach engine that I enjoy. Does anyone know how I can permenently end all threads to this program?
This morning Windows Update informed me of an update for the nVidia GeForce Go 6150 Display. However, when I tried to get more information on it, I was sent to Winqual Help Unfortunately, to get to any link inside Winqual Help one need a digital certificate, which is available for $49. It seems an inappropriate for MS to place explanations in an area that cannot be accessed by all valid owners of a Windows OS. Such explanations should be moved back to the traditional pages where they can be accessed by all.
If I change the Start Menu to the Classic Start Menu and then select Customize the Clear button doesn't clear the recently accessed documents. Is there a way to to cler the recent accessed documets?
My laptop has been accessed by one of two people I once trusted... Now my entire system & Event Viewer logs show my User Account & my Admin have been redirected. A similar user name was created to replace mine along with the Registry to delete these changes.I have hundreds of records indicating the changes but no clue where to go from here!The DOS window closes when i try "netstat" or any other attempt to view system. I do have screen shots showing the remote servers, etc I would like to not only clean up this mess but also to reveal the coward! My ex-web designer or ex-bfriend.
I have been trying to uninstall some programs, and install others, but I keep getting a message saying - Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed - I can't install the windows installer because my Windows Installer is not correctly installed..
My hard disk is continuously being accessed by some process. I do not see anything on Process Explorer doing this. How do I stop beating up my hard disk? What causes this? Does indexing show up on Process Explorer.
Right now I have a single 640 gig HDD that everything's on. I've got a laptop too that I'm gonna be taking out on rotations eventually. I wanted to get a new smaller (250GB) HDD and put my Vista on that, so my 640 will be data only (then I could take it with me in an external enclosure and leave the desktop for my mom to use til I come back and collect it). I was gonna DBAN the 640, but I wanted to get the data off of it first- about 170 GB of stuff that I'd rather not lose.
My question is-
Can I install Vista on the smaller drive, boot with that, and access files on the other drive? Would it work if there's another Vista running on the other drive? (both SATA).
I've read that SP1 has been made available through Windows Update but when I go there it does not show as available. Running Vista Ultimate 32 on my computer, full retail. Has it only been rolled out to some users at this point?
i have just recieved a toshiba satalite pro, i have put a 1gb ram upgrade in but in control panel and bios it still only shows 1gb not 2gb i have swaped the original one with the new one in case it was faulty but it works
My desktop doesn't show upon startup in VistaHome Premium. Only a blank screen and the windows explorer is shown. I have to manually go into task manager and runtask "explorer.exe" to show my desktop. I ran a scan using NOD32 antivirus software and there wasn't any virus.
I am having an issue with the hd 4350 card. I read on another post that re-installing windows solved the problem however I have an on-board video unlike the said poster. Problem: Device manager only lists the on-board display adapter, not the 4350. Heres the funny thing, When I run my diag program (pasted below) the 4350 is actually listed. I did RMA the first one I received and was disappointed to see the replacement doing the same thing. Anyway the reason for this post is to find any other possible solutions before I go an re-install windows. Wiping my puter is really the last resort for me but at this point RMA is no longer the issue.
The screen in the picture below has shown up twice. Once upon awakening from sleep and once while reading a document in Firefox. The only cure is to press and hold the on/off button until the system powers down. Windows says that I have the most current video driver. What else can I check before sending it back to HP? Picture taken with my iPhone in a dimly lit room.
My wife has just bought a laptop and has been playing the included "Hearts" game that comes with Vista Basic. I have set so that her name -Pat- appears as the key player in the game but for no apparent reason sometimes she becomes 'User' and Pat is not shown on the screen. There is nothing I can see to cause this but advice from one of you knowledgeable people out and might keep me out of the doghouse.
am using Vista Home Premium on a 9 mo. old eMachine...and want to know: How can I get the clock on my taskbar to shown the seconds along with the hour and minute?
how can I stop the full email addresses of individuals, being shown on mail I send to multiple recipients. Office outlook has the facility to edit this but I can't seem to do this on mail.
I have had a new vista desktop for about 6 weeks. It is hooked directly into a Linksys router which in turn hooked to my DSL modem. I also have a laptop on the network connected wirelessly. For the first few weeks, whenever I clicl on network I see three icons--one for the desktop, one for the laptop and one for the router. Acouple of weeks ago I noticed that now there is only an icon for the desktop and for the laptop. I have rebooted several times and then run the network utility but the router ceases to show up. The router works as both pc's have internet access and both pc's share files ok.