Having Two Copies Of Vista On One Computer: Install Vista On The Smaller Drive, Boot With That, And Access Files On The Other Drive
Dec 25, 2008
Right now I have a single 640 gig HDD that everything's on. I've got a laptop too that I'm gonna be taking out on rotations eventually. I wanted to get a new smaller (250GB) HDD and put my Vista on that, so my 640 will be data only (then I could take it with me in an external enclosure and leave the desktop for my mom to use til I come back and collect it). I was gonna DBAN the 640, but I wanted to get the data off of it first- about 170 GB of stuff that I'd rather not lose.
My question is-
Can I install Vista on the smaller drive, boot with that, and access files on the other drive? Would it work if there's another Vista running on the other drive? (both SATA).
My computer just died, with a complex Vista installation on a 250 GB drive. I have a replacement unit on its way, but is there any way to transfer the drive with the Vista install to the new computer and get a working system? My Vista is a full retail copy. I'm now working on XP from my backup machine, an old Dell Optiplex GX200, with a 733 MHZ P3 that's not capable of running Vista. I could reinstall Vista, but would lose an awful lot of data and installed programs.
My previous setup was XP on drive C and Vista on drive D. Drive C has failed and been replaced, XP loaded. Vista is no longer available. Drive D files are intact but I do not know how to load Vista on that drive without wiping out the existing files.
Whenever I try to click on X: in My Computer I get the following: X: is not accessible. Access is denied. That's kinda funny given that earlier today, chkdsk /F was able to not only run on the drive but actually told me a few filenames (the records for those files had to be updated). I ran Ubuntu LiveCD and was able to access the drive just fine from that, as well. My question is... given all this, why am I unable to access the drive from Windows Vista? Sure, maybe the drive is going bad, but that doesn't explain why Ubuntu LiveCD and chkdsk /F can access it and Windows Vista cannot. So, short of just abandoning Window Vista all together in favor of Ubuntu, what can I do?
Why is it, that when I log on to my Vista workstation with a userID other thany my local administrator, I cannot access the External Drive? I can access it fine when i logon with my local admin account.
I've configured my system to dual boot into Vista64 (OEM) and Vista86 (retail) on the same drive - 2 separate partitions in a raid 0 configuration.
Vista64 partition: is used exclusively for music recording with 64 bit software only - yes they do exist, I use Sonar.
Vista 86 partition: is for general computer use: Internet, email and such.
I understand that vista64 runs both 64 and 32 bit applications well enuf, I simply want to keep both uses apart from one another - thus my reason for a dual boot.
... so here's my question :^) Has anyone done this before, on a raid 0 using two instances of Vista? If so, could you tell me how well it's worked for you?
...also, concerning the "pagefile.sys". Since I have both vista's on the same drive in separate partitions and vista doesn't like running two pagefiles on the same drive. Should I move one to a second drive? If so, which should I move the x64 or the x86. Maybe both, eh?
I've configured my system to dual boot into Vista64 (OEM) and Vista86 (retail) on the same drive - 2 separate partitions in a raid 0 configuration. Vista64 partition: is used exclusively for music recording with 64 bit software only - yes they do exist, I use Sonar. Vista 86 partition: is for general computer use: Internet, email and such. I understand that vista64 runs both 64 and 32 bit applications well enuf, I simply want to keep both uses apart from one another - thus my reason for a dual boot.... so here's my question :^) Has anyone done this before, on a raid 0 using two instances of Vista? If so, could you tell me how well it's worked for you? ...also, concerning the "pagefile.sys". Since I have both vista's on the same drive in separate partitions and vista doesn't like running two pagefiles on the same drive. Should I move one to a second drive? If so, which should I move the x64 or the x86. Maybe both,
I,m ready to jump into vista. But I have a couple of questions that I need to be sure before I take the leap. I have WINXP pro on my local C: drive and I was wondering is Vista will let me dual boot if i need to go back to XP. Also I have another drive on my pc with 156 gig of space, in this drive i have many files that I need. Can I install vista on this secondary drive? will the installation erase all my data on this partition?. Awesome place to get info. Keep it up and Ill wait for your comments.
I have -Dell XPS 730x with 6 GIG DDR3 RAM, Intel i7 64 bit Processor, 500 GIG disk,
I am running -Windows Vista Home Premium 64 which was preinstalled on the cpu
I want to -Dual boot between Vista64 and Windows XP32
So far -I have done everything to this machine from creating a virtual window in Vista64, to going into the command prompt from vista boot disk and running diskpart to clear hard drive.
I currently have -Two partitions on one disk. Primary 200GIG and Healthy 265GIG -Windows Vista Home Premium64 installed and running
The problems im having -every time try to boot from CD and run the windows xp setup, it is UNABLE to find ANY HARD DRIVES!
I have researched that - I must have the disk partitioned - Windows XP must be installed first - I have to play with the boot.ini - If i install vista32 it will be more successful
The errors I have gotten -STOP: 0x0000008E - i researched this and it said one option is to take out the excess RAM
I will be happy if - By the end of this weekend I can successfully run XP or both OS's in dual boot.
I need to go through all this trouble because - Digidesign has not written software for 64 bit proccessing yet. I need to make music.
I need to reboot my Vista Ultimate (I know how to do this, I'll use the Recovery CD that came with my laptop), but I don't want to lose the files on my hard drive. I also have no way to access my hard drive at the moment (I tried restarting and pressing F8 and all I got was the message I initially got, below).
I got impatient at my ASUS M51 T9500 laptop freezing, so I pressed the "On/Off" button for a long time, got the computer to turn off and then pressed "On" again. The computer started, but Vista wouldn't come up. I got this error message, which I keep getting when I do "Ctrl Alt Delete" (I don't know why I tried that, I just hoped it would help) and when I restarted and pressed F8: Windows Boot Manager. Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert the Windows installation disc and restart your computer. 2. Choose your language settings, then click "next." 3. Click "Repair your computer."
I am Using Vista Ultimate 64. I would like to tranfer my entire drive incuding all files and the Operating system From my current IDE HDD to a new SATA Drive of the sames size (500 Gig) I need the IDE Drive for an older computer ( The 40 Gig IBM Deathstar still functions great, but all programs seem more bloated these Days)
Anyway I went to Administrative Tools and Formated the New Drive NFTS with no Drive Letter. But I cannot get it recognized as a transfer device when I go to system backup. Can I use 'C' on the second and soon to be only drive? If I have to use E or F for now can I change it back later. would that affect the file system? I intend to Low level Format the IDE and try cloning the old machine's XP Drive (32 bit) to it in the second place.
I want to shrink the C Drive (Vista Drive). Actually 111GB is free out of 236GB on the C Drive but I am only about to Shrink 6GB and even when I try to Shrink the Drive by 6GB I get an error. I want to create a new partition on my hard-disk. These are the screen shots:
I have twp PC's a Vista Ultimate with two drives and XP Pro with two hard drives. I can access the files on the XP PC from the Vista PC, and I can access the files on the second drive (D: Drive) on the Vista PC from the XP{ PC. BUT I cannot access the files on the C: Drive of the Vista PC from the XP PC. When I look into the properties dialogue box for each drive on the Vista PC I see differences in the security options, where on the D: Drive I get "Everybody" as the Group/user name but for the C: Drive I get "Authenticated users".
I'm new to Vista x64 (the op sys as well as this site). I have just endeavored to try out Vista 64 bit on one of my workstations. I run VMWare Workstation at work and can use the additional memory addressing of Vista 64 (I have 4 gigs of RAM). nyway, my problem is this.
1) I created another partition on my drive for Vista x64. (two other partitions running Vista x86). 2) I have been running dual boot with Vista for quite a while and it runs fine. 3) After creating the new partition and installing Vista x64 with SP1 (integrated service pack on install DVD), I get drive corruption problems all over the place.
I have 3 500 gigabyte Western Digital drives in this machine. The first is for operating system partitions and the second strictly for backup (using Acronis True Image) and the third for data. The data drive seems to have problems reading when I attempt to install additional drivers for the x64 bit environment (just downloaded from the web). Also, I soon will get errors afterwards on the C drive also.
I upgrade my notebook to Vista and the video drive automatic installed by Vista is RADEON XPRESS 200M (WDDM), version 7.14.10.8333. When I try to install the version 8.5 (from the ATI site) nothing happens. If I force to install the new drive, Vista Update still inform the best drive is the older, and the CCC (Catalyst control center) still not installed.
Can Microsoft delete files on my computer through VISTA without my consent? If so, what files can be deleted? Can files be accessed by them the same way? Again, if so, does anyone have a link to website documenting this?
We have 3 W2k computers and a new vista computer. The Vista computer cannot access the shares on ONE of the Windows 2000 computers. The network is peer to peer and with the exception of the Vista computer accessing this particular Win 2000 computer, everyone can access everything. (we are trying to share a printer on the Win 2000 computer, but the computer rejects the user name/password from vista computer). I have triple checked the permissions and when you try to access the share, you get a user name/password error. You can access the same share from one of the other win 2000 computers using the same user info and it works fine. All Win 2000 machines are SP3, we had some issues on one computer with SP4 and never installed it on any of our computers. Is there an update or a setting on the Win 2000 computer that would only effect the vista computer accessing the 2000 shares?
I've upgraded my machine at some point in the last year, where I added a new 500GB drive and moved my C: partition across to it. The previous 250GB drive was left in for additional storage. Just recently (while upgrading my BIOS) I realised that my system was still booting from the 250GB drive even though Windows was on the other disk. There is a fair possibility in the not too distant future that I'll replace the 250GB disk with a larger disk, in which case I won't be able to boot. Is there a safe and reliable way to change it so that the system boots from the 500GB disk?
I have just put a new ide dvd-rewriter into my computer and my computer doesn't recognize the new dvd drive or an existing cd drive. I cant see them in 'My Computer' or the 'device manager'. I don't no if this has anything to do with it but at the same time I also installed a new TV tuner into the computer and now I cant run the CD to fully install it.
When I try to boot Vista (Home Premium 32bit), the loading screen with the green bar doohicky shows up followed by a black screen with the mouse cursor. It oscillates between "working" and regular cursor but in the end, the computer just restarts and it does that again if I try to boot it. This probably happened because I system restored right before getting this problem, but I'm not absolutely sure. I also got this error message just once or twice in the many times I tried to boot:..........................
I have put a new hard drive in my case, just for a bit of extra storage. It is set to a slave drive but when it is plugged in and i start my computer vista wont boot. I am stumped with this one.
I am trying a new install on a new machine. I have 2 WD 250 GB drives (not in RAID config). When VISTA installs it tells me the first drive is not recognized as boot drive and won't load. I tried to install on second drive and get a error message about a volume does not meet VISTA criteria (or something like that)and won't install. These are both brand new drives. Both drives are correctly identified in the BIOS.
Right now i am booting off of an 80gb IDE hard drive but i want to clone the drive onto a 150gb sata drive and make the sata drive my boot drive. I have used Acronis True Image to clone the hard drive. I restarted and everything copied over in DOS successfully but then i tried to boot off of the sata drive and everything seemed to work out fine.. Vista load bar showed up, i was able to enter my password to log in and then it said preparing desktop like it was the first time i installed vista. It was stuck on that screen for a few mins and then a blank blue screen just came up. it seemed like it was the default background for Windows 2000 or something like that and it just stayed there. So now i'm back to booting off of the IDE drive...
I have a dual boot system: XP PRO on drive C and Vista Home Premium on drive B. I want to replace my hardrive, and move (or clone) Vista to new drive and be it C drive. Vista is still virgin and not other programs are installed, so changing it location from D to C drive will not influance any applications. I know how to create hard drive image. My question is how to make that new c drive with Vista on it bootable again. Is there any utility I can use?
I just bought and installed a external hard drive. I am fairly knowlegable about computers but this is my first Ex. Hard drive and know very little about there use. So what I want to know is how to save my Family Tree Makers files to it. And once I do that how do I know for sure it is opening from my new drive and not my computer C: drive? I saved it to a DVD one time but when the time came when I needed it all that was there was a short cut but no files.
When I was running XP, I put some personal files in a special encrypted folder, but I forgot to decrypt it when I backed it up to install Vista. Now, everytime I try to open one of the still encrypted files, I get the message saying "Access Denied".
