I have just put a new ide dvd-rewriter into my computer and my computer doesn't recognize the new dvd drive or an existing cd drive. I cant see them in 'My Computer' or the 'device manager'. I don't no if this has anything to do with it but at the same time I also installed a new TV tuner into the computer and now I cant run the CD to fully install it.
View 9 Replies
My new computer (Vista) is wired to a wireless router. While the router sees all other connections to the network, Vista doesn't recognize ANY computer (1 on XP, 1 a MacBook and 1 a wireless game system). How do I get Vista to recognize the other computers on the network? Previous XP computer saw and allowed sharing without issue, so not a hardware problem I'm thinking, as the new computer/Vista is the only change to the system.
View 4 Replies View RelatedI am making the upgrade to a RAID1 setup for my multimedia collections. I am using a 250GB boot disk where I have 3 versions of windows installed: XP, Vista, and 7RC. So, this setup is not intended for booting purposes and is intended to be used by my different OSs.
I bought two identical 1T Maxtor HDs and a Sabrent SATA II 3Gbps 4Ports PCI ExpressRAID Card. All items have been installed into my computer. The card's BIOS recognizes the HDs and I formatted and paired the drives there for RAID1. Windows has installed updated drivers for my Sabrent controller.
For some reason I cannot see the drive on my system. I've searched all over for any incite to setting this up without reinstalling windows. Is this at all possible? Is there a program that I can download to setup the array that's similar to Intel's Matrix Storage Manager? Again this is not my primary boot drive.
My previous setup was XP on drive C and Vista on drive D. Drive C has failed and been replaced, XP loaded. Vista is no longer available. Drive D files are intact but I do not know how to load Vista on that drive without wiping out the existing files.
View 5 Replies View RelatedWhen I R-click on my C:drive in Computer, I see an option labeled "Special Permissions", but it doesn't seem to be available. What are Special Permissions, and if they're important for anything, how do I enable them? Logging on as Administrator produces the same effect. Speaking as a user of Windows since its first release, I find Vista with its UAC, Permissions, and the need to repeatedly confirm every action I tak to be frustrating as hell.
View 9 Replies View RelatedI am running a dual boot system, XP and Vista. See below for system components. I have been using the Windows XP OS with two RAID 1 arrays with no problems. The arrays were created using the BIOS, and XP was installed with the Intel RAID drivers (via floppy during initial setup). For the two arrays to accessed (read/write) I found I had to use XP's Disk Management utility and convert the arrays to "Basic Disks". I was not worried about the warning of loosing data on either array as they were blank, no data.
I recently installed Windows Vista, and found this OS will not recognize the two existing RAID arrays. I can not see either arrays with "My Computer" nor with "Windows Explorer". Therefore I can neither read nor write to these RAID arrays.....
How come this happens? I will be using Windows Vista 32bit Home Premium and it simply will not recognize any DVD that I put in the DVD drive. I hit restart and the same thing happens. Then I hit shut down and let it shut down and then restart it with the power button and the DVD-RW drive and any disc in it will be read perfectly. This seems odd and disconcerting.
View 4 Replies View RelatedMy vista x64 will not recognize my ide drive. It was internal then rigged it to be external and nothing. And yes it works on other computers.
View 6 Replies View RelatedThe drive is properly installed and is recognized correctly in the bios screen at startup. vista hp boots up. I right-click on my computer> manage. The computer management utility opens up and the new drive is recognized in the device manager but when I click on disk management I get a pop-up saying "an internal error has occured.
Restart the Disk Management snap-in." I hit ok. the same message comes up three more times, then I geta message saying "MMC has detected an error in a snap-in" and requeststhat I shut down and restart MMC, which I do and it just does the same again. Thats as far as I get. But here's the thing: I've been getting that error message way before I even installed the drive but had forgotten about it til now.
My OS is Vista Home Premium 32 bits. My cd/dvd drive is HL-DT-ST DVD-RAM LG GSA-H55N SCSI. I have one strange problem with my cd/dvd drive since a couple of days.
---My cd/dvd drive doesn't recognize Maxell CD-R discs and certain movie dvds and doesn't read any music cds (manufacturized albums). When I insert the disk, there's this message ''Insert the disk on Drive E:''. But it doesn't have any problems with other CD-R and DVD-R like Memorex and Sony. Last week, October 26, I played a DVD movies (like Broadway melody) without any problems. I tried to play it again today it gives me the ''insert the disc message''. Is it due to some Windows update? or anything?
After I installed SP1 today, all third party burning software will not recognize my DVD drive as a burning drive. I can only burn from the embedded windows burning software.
View 5 Replies View RelatedI ordered a SanDisk 4.0 GB Cruzer Micro USB Flash Drive with my Vostro 400 computer running Windows Vista 32 bit Home Premium Edition. When I inserted the Flash Drive in the USB port Windows asked me to install the driver for the device. There was no software included with the Flash Drive. I checked the box requesting Windows to look for a driver through the Windows Update feature. It came back and said no driver could be found for this device. I then went to the manufacturer's website but they don't have a driver listed for this particular Flash Drive. I called Dell and all they could tell me is that Windows should have recognized the device automatically. how I can get Windows to recognize this device. My brother has the same identical computer and Flash Drive and his installed without a problem
View 8 Replies View RelatedRight now I have a single 640 gig HDD that everything's on. I've got a laptop too that I'm gonna be taking out on rotations eventually. I wanted to get a new smaller (250GB) HDD and put my Vista on that, so my 640 will be data only (then I could take it with me in an external enclosure and leave the desktop for my mom to use til I come back and collect it). I was gonna DBAN the 640, but I wanted to get the data off of it first- about 170 GB of stuff that I'd rather not lose.
My question is-
Can I install Vista on the smaller drive, boot with that, and access files on the other drive? Would it work if there's another Vista running on the other drive? (both SATA).
I recently tried to burn a CD for the first time in a number of months. I'd always used Roxio software for burning with no real probs but this time I could not get the drive to recognize the CD-R disk. Decided to delete the Roxio software and use the built in Windows Vista burning program instead but kept getting same message asking me to insert a disk. Checked the DVD RW drive properties and found it was set up ok as a recordable drive. Decided that the drive must be kaput so I bought a new one. Installed that ok but still Windows wouldn't recognize any recordable disks of any form that I put in the drive. Installeed the Nero 8 software that came with the drive and still have the same problem using that!
View 9 Replies View RelatedI have a 720GB internal drive that I've maxed out with automated weekly backups. I have another drive with a lot of space, and my question is, can Vista backup be set to continue the existing backup onto an additional drive. In other words, the backup files would be spread over two drives?
View 5 Replies View RelatedI am Using Vista Ultimate 64. I would like to tranfer my entire drive incuding all files and the Operating system From my current IDE HDD to a new SATA Drive of the sames size (500 Gig) I need the IDE Drive for an older computer ( The 40 Gig IBM Deathstar still functions great, but all programs seem more bloated these Days)
Anyway I went to Administrative Tools and Formated the New Drive NFTS with no Drive Letter. But I cannot get it recognized as a transfer device when I go to system backup. Can I use 'C' on the second and soon to be only drive? If I have to use E or F for now can I change it back later. would that affect the file system? I intend to Low level Format the IDE and try cloning the old machine's XP Drive (32 bit) to it in the second place.
Before the computer actually came to the point of "shuting down just before it tried to load the o/s" it literrly kept shuting down on its own randomly for a week or so. Then the blue screen appeard with this error: 0x0000007BC , 0x84C5DBA0, 0x0000034, 0x00000000, 0x00000000 "Run CHKDSK /F and check for Hard Drive Corruption and then restart your computer"
Basically it's telling me the DRIVE is corruptet! Well, I plugged that SATA 2 HDD into my other computer (windows xp), detected it correctly and actually formated the drive and reinstalled XP on it without any types of problem. Does it still mean - SATA 2 is corrupted or broken!? How about the RAM then ... indeed, I did run the MemTest for 7 times and no errors were found. So the RAM are ok in this case, or am I wrong?! Maybe it's the PSU... ermmm no that cannot be 'cos the computer never shuts down, if I leave it run for (e.g 5 hours) and even if it's comes to "overheating" that cannot be the case eather, as its *again" never shuts down when you leave it run on the power.........
I'm running Vista on a PC that has a hd that has been formated into 3 discrete drives.Vista is loaded onto the C drive, programmes are loaded onto the d drive while i have my data stored on my E drive. By default any documents I save are directed towards My Documents on the C drive - how I go about changing that so the default is my Documents on the E drive?
View 9 Replies View Relatedhave looked through other helpful posts on here regarding the Autorun problems, having looked into that i checked all registry entries etc that were fine, however, i dont have the NoDriveTypeAutoRun where it should be all i have is
(Default)
BindDirectlyToPropertySetStorage
This doesnt seem to tie in with the write ups i have looked at and cant find the NoDriveTypeAutoRun. Also, there is no action when i insert the cdrom or dvd etc into the pc, have looked to find the manual start procedure but cant see anything in there, what drive should i be looking in?
I posted this a couple of months back: I have a Toshiba Satellite L300 and my DVD drive doesn't seem to be working. I tried it with various CDs and DVDs and it never detects anything. So I went to the Device Manager and this is what it says: TSSTcorp CDDVDW TS-L632H ATA cannot start (Code 10)." But while the solution kind of worked, it's still not playing the DVDs everytime. First, it doesn't always eject the disc. The only way I can ALWAYS get it out is during restart, or using a paperclip. Second, even if I take the disc out, the computer still tells me it's there (it displays the disc name too...). And worst of all, if the disc is in, it displays the disc name and I click on it, it doesn't load anything most of the time. Unless I restart it, take the disc out at that time and then put it in (and that's not guaranteed to work either).
View 9 Replies View RelatedFirst disclaimer... I'me really a network novice. I've used XXCOPY and Robocopy to successfully back up entire volumes to an eSATA connected drive, but when I try to do the same to a newly acquired NAS drive, it doesn't work right. Instead of copying "only" the files that are new (or changed since the last backup), Robocopy copies every file over again. And XXCOPY (free version) won't copy at all to the NAS drive. I downloaded the 60day trial of XXCOPY home, and it does work right, (except it recopies lots of zipped files) but XXCOPY home costs $40. Here's a typical command (from a batch file) for each: Robocopy E: \DLINKVolume_1E-BACKUP /MIR /R:1 /W:1 and xxcopy e: \dlinkvolume_1e-backup /clone/ff I also found RichCopy, which I tried, and find it also copies files that are already in place on the NAS drive. Could it be that I have a problem with the way I've set up the NAS? I'm probably overlooking something basic,
View 4 Replies View Relatedmy DVD-drive doesn't read disc's. The drive I'm using is TSSTcorp SH-S223Q ATA, so a Samsung DVD-drive. When I bought it, it read fine, but not anymore. It doesn't read even bootable disc's (I tried Vista Ultimate x64). I've tried upgrading firmware from B00 to B03, but it didn't help. I had a similar problem when I bought this computer in August 2008. My DVD-drive read the disc's fine for couple weeks or so and then it stopped working. Then I replaced it with this drive (It's not the same model). This one worked fine for a month or two and stopped working, so it's been couple of months not functioning. I just did a fresh install of Vista yesterday and the problem is still here.
View 9 Replies View RelatedThis seems to be common—the optical drive doesn't work. I'd like to detail more symptoms, though, that might help form a real fix for those whom the solution at The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista wouldn't work, as it didn't for me (Upperfilter and Lowerfilter values don't exist in my registry).
Upon a clean installation of Vista, the optical drive works fine. After installing the whole slew of current updates, it stops working. I didn't figure this was a thread for the Windows Updates forum, though. When putting in a disc, the drive goes to work (illuminated busy light and the sound of the drive spinning) for a bit, then turns off and on continuously, freezing the computer until the disc is ejected. A disc left in the drive upon start-up will work correctly. Once I open the drive, however, that's when it no longer works, whether I load the same or different disc. So my question is, is there a way to fix this? Other solutions, like uninstalling the drive in the device manager and rebooting, haven't worked for me.
I currently have a SATA drive in my desktop. I desire to add a second SATA drive to increase storage space. In reading about the drives many places speak of the need for special SATA cables. I have not pulled the case yet on my computer but, with older computers, there have always been extra connectors on the ribbon and power cable to connect to additional drives. My basic question is if I purchase a "bare" drive, do I need some sort of cables to connect it as a second drive in my computer??
View 5 Replies View RelatedI have an HP Pavillion a1473w that I installed a new WD 320 drive in a few weeks ago. This a second internal drive just for data. Been working fine until tonight when it just vanished. It shows up in bios but not in explorer (My Computer) or in Device Manager.When installed I initialized it as 1 partition and formatted it. Worked fine.I don't care about the data, just want my drive back.
What shows in bios:
Samsung SP2004C
WDC WD3200AAKS-00L9A0
Doesn't show in drive management either. Tried new data cable (SATA) and reseated power cables. Even removed one of the DVD drives thinking it might be a power problem.Also the computer takes about twice as long to boot.Don't have another computer to try it in (my Mac is IDE).Using Vista Home Premium. All updates.
I have a Simpletech 250GB external hard drive that wont show up on my laptop. It works on my Dell. I am getting this error message when looking at Device Manager. Windows cannot use this hardware device because it has been prepared for "safe removal", but it has not been removed from the computer. (Code 47) Anyone else have this problem?
View 4 Replies View RelatedI ran a sfcscan and... It seems I have some corrupt files. This laptop doesn't have a recovery/reformat drive or i'd just reformat the laptop. Moreover, I don't have a recovery disc for vista, just Win-7. Perhaps anyone can pinpoint me in the right direction? I have the CBS file... However it's close to 24MBs...
View 4 Replies View RelatedI was cleaning my computer and accidently uninstalled my realtek audio drive. I immediately re downloaded and installed it but now my sound doesnt work. My sound icon isnt X'd out or anything, I'm just not getting sound. I'm sorry if I'm not providing enough information, ummm... lets see if I can give more info... I think it might have something to do with the fact that I'm using an HD TV screen and my sound comes through that... but I dontknow how to fix it.
View 2 Replies View RelatedSomehow I managed to mess up my boot disk by converting it to dynamic. Now whenever I boot, I need to: This will now let that drive boot. I'm running Vista Ultimate with several SATA and USB drives attached - the boot drive is SATA. I also see a strange drive in disk manager (once it's booted) showing as "foreign" a 479mb partition that I don't recognize. I'm tempted to delete it, but won't until I know that it wouldn't hurt anything. Is there anything that I can do to avoid this process every time I reboot?
View 9 Replies View RelatedI have a problem on MSN that it doesn't recognize my web cam i know it works because other programs pick up the camera.
I have tried to uninstall the driver and reinstall it but that doesn't work
I can't find my cd/dvd in my computer. i run vista home premiun 32bits.
View 9 Replies View Related
