I want to shrink the C Drive (Vista Drive). Actually 111GB is free out of 236GB on the C Drive but I am only about to Shrink 6GB and even when I try to Shrink the Drive by 6GB I get an error. I want to create a new partition on my hard-disk. These are the screen shots:
View 6 RepliesI refer specifically to this Tutorial;
Disk Management - Shrink Partition
A bit of background first. I have recently had installed a new 320GB Hard-drive to my Laptop [see my Specs]. The allocation of partition [volume] space has been divided evenly between the C:[Acer] - 139GB, and the D:[Data] - 138GB, Drives on the HD.
This is what I have;
Questions;
Question 1; Is this setup division just the 'norm' for allocating volume space for each drive? In this case it is more or less a 50:50 share of the available space [PQ Service on a hidden partition takes up the rest]....why not 65%[C]:35%[D]? Question 2; Is it necessary for the partition volume of the Data drive to more or less mirror that of the Acer drive? Question 3; If answer to Q2 is 'not necessarily so', am I then able to partition the Data drive to create a new drive partition of about 60GB, or are there any pitfalls in playing around with this particular drive? If possible, I'd like to create a new drive on the HD for personal data storage.
I recently fresh installed my Vista Premium x86 on my homebuilt, and I had all my data backed up on my flash. When I plug it in, Vista dings like normal, but it is not in Windows Explorer and Disk Management. The Drive did have some Code 10 Device Cannot Start problems, but those are worked out when I disabled it and re-installed the driver, and the drive DOES show up in 'Safely Remove Hardware' and the Device Manager. I kinda diagnosed that it doesnt have a Drive Letter assigned, due to the flash drive working in my XP x64 dual-boot.
View 7 Replies View RelatedI have a laptop with a 90GB hard disk. There is 60GB free and I'm trying to use the Shrink volume option in Disk Management to make the main partition smaller. After I want to create an additional partition so I can dual boot. The problem lies with Shrink Volume. Even though I have 60GB free it's only offering me the chance to shrink by 14GB.I've turned off system restore and hibernate. I've also used a number of defrag tools including Auslogic and SysInternals.
View 7 Replies View RelatedI downloaded Windows 7 RC1 with the intent of adding a partition to my HDD and dual booting. My understanding is that I would need a 16GB partition. My Disk Management Console tells me I have two existing primary partitions (expected). D (the recovery partition) is 6.62GB. The other (C) makes up the difference (~142GB) and has 47.1GB free space. When I begin the "shrink volume" process, it says that only 3MB is available to shrink C. I checked the page file and it has less than 3GB allocated to it. So, I have two questions. First, why isn't more shrinkage ;>) space available? Two, assuming that with your help I can find more space, if I try to create a 16GB partition from C will I significantly affect computer performance?
View 9 Replies View RelatedI want to know that how can i increase my C drive. In the disk management it is showing 23.75 G.B. but in my computers it is showing 12.74 G.B. and apart from this i have F drive which is fully empty can i utilise it?
View 9 Replies View RelatedI have the following setup now: C: Vista, D: CD, E: CD RW,F: DVD RW, G: = Backup Vista, H: Backup 2, I: Old Stuff. This is what shows up when I look in Computer. The surprising is that I = don't have a CD, although I do have everything else. I want to remove = the erroneous D: and rename I: to D: -- and Disk Management does not = appear to help.
View 9 Replies View RelatedI have 5 USB devices (2 external drives, 1 flash drive, one CF card reader, and 1 Sony walkman) that when connected score a drive letter. My problem is that the drive letters change depending on the order in which the devices are connected (the first one plugged in gets drive F, then G, etc). This causes a headache for my backup software SyncBackPro, where I have schemes set up for my two external hard drives based on drive letters. I can change the drive letters in Disk Management (Vista Ultimate) but that only sticks while that device is connected. For instance, if I unplug my primary backup drive G and connect my flash drive, the flash drive would then become G. Is there any way of permanently locking a particular device to a particular drive letter?
View 6 Replies View RelatedSee attached. Cannot shrink the C: drive to create a new partition. using Vista Ultimate 64bit with SP1 refresh 2
View 9 Replies View Relatedi just bought My Book Essential 1 TB today... and when i got home i plug it and it works just fine but its bothering me that the HDD type is FAT32 .. so i format it and try to change it to NTFS.. but somethings happen and boom the electric in my apartment was down... and so when the electric back i want to format it again but i can't... there drive is detected but with no space detail... it says "Windows can't format Drive H: - Check to see that the disk and drive are connected properly, make sure that the disk is not read-only, and then try again.
For more information, search Help for read-only files and how to change them" when i open the Disk Management from (My COmputer > Manage) it seems it's already a volume.. but the weird thing there is no space detail.. and i cant erase the volume ... i've tried using diskpart but i can't do nothing because there is no volume and i can't erase the disk... no luck with fsutil cause its not ntfs... I havent tried 3rd party software and i havent tried it on other computer (don't have other computer right now) and WDC didnt give live cd for formatting because all of them was in the drive... though i already redownload it but the program is useless..
In Vista x64... any problem with this? For example on a second physical disk - D: drive? Do I need to do anything special?
View 3 Replies View RelatedRight now I have a single 640 gig HDD that everything's on. I've got a laptop too that I'm gonna be taking out on rotations eventually. I wanted to get a new smaller (250GB) HDD and put my Vista on that, so my 640 will be data only (then I could take it with me in an external enclosure and leave the desktop for my mom to use til I come back and collect it). I was gonna DBAN the 640, but I wanted to get the data off of it first- about 170 GB of stuff that I'd rather not lose.
My question is-
Can I install Vista on the smaller drive, boot with that, and access files on the other drive? Would it work if there's another Vista running on the other drive? (both SATA).
In Windows Vista it is now possible to resize partitions without any data loss in the new Disk Management console.
Resizing Partitions with Windows Vista:
Click on the Start Button and right click on Computer and select Manage.
Expand the Storage section and select Disk Management.
Then just right click on any partition and select either Expand or Shrink to change the size of the partition....
Subject: Windows Usability Systematic degradation flame. I am quite disappointed at how Windows Usability has been going backwards and the program management groups don't drive usability issues. Let me give you my experience from yesterday. I decided to download (Moviemaker) and buy the Digital Plus pack ... so I went to Microsoft.com. They have a download place so I went there.
The first 5 times I used the site it timed out while trying to bring up the download page. Then after an 8 second delay I got it to come up. This site is so slow it is unusable. It wasn't in the top 5 so I expanded the other 45. These 45 names are totally confusing. These names make stuff like: C: Documents and SettingsillgMy DocumentsMy Pictures seem clear..............
Vista Home Premium 64bit SP1. When I try to get into Storage -> Disk Management, it just sits there. At the bottom it says "Connecting to Virtual Disk Service".. I see NO disks listed, not even C:...
View 5 Replies View RelatedI am Using Vista Ultimate 64. I would like to tranfer my entire drive incuding all files and the Operating system From my current IDE HDD to a new SATA Drive of the sames size (500 Gig) I need the IDE Drive for an older computer ( The 40 Gig IBM Deathstar still functions great, but all programs seem more bloated these Days)
Anyway I went to Administrative Tools and Formated the New Drive NFTS with no Drive Letter. But I cannot get it recognized as a transfer device when I go to system backup. Can I use 'C' on the second and soon to be only drive? If I have to use E or F for now can I change it back later. would that affect the file system? I intend to Low level Format the IDE and try cloning the old machine's XP Drive (32 bit) to it in the second place.
I'm running Vista on a PC that has a hd that has been formated into 3 discrete drives.Vista is loaded onto the C drive, programmes are loaded onto the d drive while i have my data stored on my E drive. By default any documents I save are directed towards My Documents on the C drive - how I go about changing that so the default is my Documents on the E drive?
View 9 Replies View RelatedI was under the impression that it was possible to partition a hard disk via Disk Management. I want to split the existing C drive into two drives but when I right click the drive in Disk Management there is no option to do this. Is this not possible in Vista?
View 7 Replies View RelatedI am using Vista Home Premium 32-bit on a Compaq laptop, i have a Fujitstu MHW2160BH PL ATA disk drive device. It has been quite tempermental over the last few weeks but now it will not open at all, I have uninstalled and re-installed the device but it still won't work.
View 9 Replies View RelatedI have a TSST DVD +- RW TS -H653A SCSI drive. Computer is Dell Inspiron 531 running Vista Home Premium. The drive will not read DVD Ram disk. Does anyone know if an update is available to enable this drive to read DVD Ram. I have been searching, but cannot so far at least, come across an updated driver.
View 6 Replies View RelatedI have a San Disk 4GB Cruzer Micro thumb drive with U3 on it. I had orginally gotten the drive when I had a HP that was running Windows XP. It worked fine on that computer. Well the XP machine took a crap and was replaced with a Compaq that is running Vista Home. The drive was NOT inserted with the HP crashed. Now when I insert the Thumb drive into a usb port it lights up and shows in "my computer" as an Audio CD with a drive letter of "H". The Launchpad does not start and the password screen does not come up either. The directory of the drive only shows 1 file (which does not open) and there was aprox 1000 files on it before. San Disk has been no help and I have not been able to find anything on the internet that has helped. Oh did I mention that I have very little computer knowledge, .
I normally would not be to ticked about this but all the files on the drive are family photos, photo's of hunting trips etc. I know my fault for not saving them to a CD and relying on a thumb drive but I thought they were more reliable than this. Here is a little twist, I have another Sandisk thumb drive that was used with the XP machine but this one works on the vista machine! I havent been able to try the drive that I am having trouble with on another XP machine as I dont have access to one (work switched all computers to vista). I dont know if it is a formatting issue or what but I can not figure it out.
I would like to change the "Disk Drive Policies" (see attached screenshot). If I check the box "Enable write caching on disk" and "Enable advanced performance" and then click ok and after that I reopen the "Policies" again evrything is like it was before I made the changes. Is there anything I can do in order that the changes I make will be accepted and won't jump back to the previous settings?
View 4 Replies View Relatedwhen i try to install software it comes up with (drive)not enough disk space..when i have 30gb left.. when i attempt to create a restore point twice 1st came up with 0x80070070 and 2nd was. when i load a picture it says not enough picture please close some apps/free up disk space. when i uninstall a software it says an error occured while writing installation information to disk.check to make sure enough disk space is available, and click retry or cancel end the.. my computer has 1 harddrive split into C and D partitions...its an ACER 57357 with 4gb ram,2.16ghz-667mhz fsb-1mb l2 cache, 320gb harddrive, 4500m intergrated graphics
View 4 Replies View RelatedI reallllly wanna try out windows 7 RC. But i only have 1 computer. Is it possible for me to make anew disk drive(like using MagicISO or some-other program like that(other may be familar that that stuff) But is it possible? because i dont wanna mess up my laptop... But i wanna check out the latest RC's before pre-ordering W7. (but then their the problem of dual booting? I dont get how that would work if i jst make another disk drive)(?)
View 9 Replies View RelatedI think I messed up my hard drive while trying to erase the EISA partition on it. It's a Gateway P7811-FX laptop with a single 200 GB hard drive. Before, I only had 1 main partition: the C: Drive (176.31 GB), along with the hidden 10 GB EISA partition. After making recovery disks, I followed this tutorial: Delete and Remove to Unlock EISA Hidden Recovery or Diagnostic Partition in Vista » My Digital Life
Following that, I went in Disk Management. The hidden partition showed up, but I couldn't extend the C drive to use the unallocated 10 GB, so I converted it to a simple 10 GB volume. Then I used Acronis Disk Director Suite and merged the two partitions. And now, I can't do anything in Disk Management. There's only one partition now (186.31 GB), but when I right click on it, there's no options to create, shrink, delete, or extend the partition. They were there before, but the only option that shows up is Help.
Under Status, it says Healthy (Active, EISA Configuration). I think I merged the partitions the wrong way, so now there's no "System, Boot, Page File..." partition. Everything is on the EISA partition. When I try to run Acronis, the program doesn't load up. I've tried using Diskpart but I can't create any new partitions either.
It's my new Sony ebook reader. It works fine on my old XP pc but not my Vista Home Premium laptop. I don't know how reformatting an actual reader would affect the device since every one at the Sony forum has only reformat their memory from the actual reader that has a reformat memory, you lose your books but all the Sony applications that runs the reader are still intact. Since I got this error, I've reformatted via the actual reader and still every time I plug my reader in my USB port, I get this error. I'm scared if I say yes that all the applications that makes the reader works will be wiped out. Here is the thread in the Sony Reader Forum of them trying to help me. I come on on #8 post as Sandyn Sony Reader Forum - Sony PRS300
View 9 Replies View RelatedMy CD/DVD drive (optical drive?) is not reading anything i put into it! It makes the same sounds that it always makes when I insert a new CD, but then nothing happens. It does not ask if I want to open it in Windows media player or any other program. So I tried opening all my programs manually, but still it does not show that anything is in the drive.
View 5 Replies View RelatedI just changed the letter on a external hard drive. Now the disk drive icon has dissapeared?? I tried to change it using a ico file, but nothing is working? It is still the same?? Does anyone know what has happened? or, tell me what to do? To get the image back?
View 9 Replies View RelatedRecnetly I noticed I had a 4th hard disk drive instead of 3. The strange thing is that I can't remember adding one.. I just got my 2 internal hard disk drives and 1 external hard disk. But now it shows 4. Also, when I try to open this 4th hard disk it gives an acces denied error message. Also, I'm unaible to scan the hard disk. For my other hard disks, when I right click, I got the option to scan for virus. This option isn't in the list when I right click this new station. Here are the menu list by right clicking on the HDD's.
View 9 Replies View RelatedI can't play any games on my laptop, because for some reason my drive isn't working. I have Windows Vista but I don't have a disk because it was already on my laptop when I got it. I went to my drives to view what was going on and I get this message: Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39) I don't know what this is and I have never seen it before. The drive Optiarc CD-RW CRX880A ATA Device it has the picture of the drive and for some odd reason there's a caution sign on it.
View 9 Replies View RelatedThis is the second time this has happened, only the first time it reappeared after i rebooted. Basically, i can't recall the day it 'disappeared' but it was over 4/5 days ago i think. I've rebooted a number of times, tried the DVD drive tutorial thing from windows, and ran a few scans and still nothing.
However, my device manager tells me that its working correctly. Great. I dont think i've done anything differently, i first noticed it was acting up when i converted and burnt a dvd onto a disk and the drive wouldnt open, so i had to reboot, it opened and then there was nothing on the disk, and from then on its gone........