Unable To Shrink C Drive For New Partition
Feb 5, 2008See attached. Cannot shrink the C: drive to create a new partition. using Vista Ultimate 64bit with SP1 refresh 2
View 9 Replies
ADVERTISEMENT
Partition Tool: Not Shrink Partition
Mar 13, 2009My C: drive is 1Tb in size (931.43Gb), with Used Space of 73.8Gb and Free Space of 857.65Gb. I want to shrink the C: partition down to 200Gb, and use this just for my OS and App files - I'm running Vista Ultimate 64 bit. This would then leave me with a new partition of c. 750Gb for my data files and documents etc. However, Vista will only offer to shrink the C: partition by around 260Gb as a maximum. It will not allow me to select a larger size than this. I've tried turning off System Restore / Shadow Copies, but this makes no difference. Any ideas why this should be, and what can I do? p.s. I've tried using Acronis Disk Director as well, but whilst I can select a new C: partition size of 200Gb, when the system reboots, nothing has changed, so ADD won't work either.
View 4 Replies View RelatedPartition Resize: Not Shrink
Mar 26, 2008Tried the built-in partition mgr but it does not shrink the partition much. Can it use partition magic 8 on it?
View 6 Replies View RelatedDisk Management - Shrink Partition In Vista
Aug 12, 2009I refer specifically to this Tutorial;
Disk Management - Shrink Partition
A bit of background first. I have recently had installed a new 320GB Hard-drive to my Laptop [see my Specs]. The allocation of partition [volume] space has been divided evenly between the C:[Acer] - 139GB, and the D:[Data] - 138GB, Drives on the HD.
This is what I have;
Questions;
Question 1; Is this setup division just the 'norm' for allocating volume space for each drive? In this case it is more or less a 50:50 share of the available space [PQ Service on a hidden partition takes up the rest]....why not 65%[C]:35%[D]? Question 2; Is it necessary for the partition volume of the Data drive to more or less mirror that of the Acer drive? Question 3; If answer to Q2 is 'not necessarily so', am I then able to partition the Data drive to create a new drive partition of about 60GB, or are there any pitfalls in playing around with this particular drive? If possible, I'd like to create a new drive on the HD for personal data storage.
Cannot Install XP 32 On Partition In VISTA 64 - UNABLE TO FIND DRIVE
Dec 27, 2008I have -Dell XPS 730x with 6 GIG DDR3 RAM, Intel i7 64 bit Processor, 500 GIG disk,
I am running -Windows Vista Home Premium 64 which was preinstalled on the cpu
I want to -Dual boot between Vista64 and Windows XP32
So far -I have done everything to this machine from creating a virtual window in Vista64, to going into the command prompt from vista boot disk and running diskpart to clear hard drive.
I currently have -Two partitions on one disk. Primary 200GIG and Healthy 265GIG -Windows Vista Home Premium64 installed and running
The problems im having -every time try to boot from CD and run the windows xp setup, it is UNABLE to find ANY HARD DRIVES!
I have researched that
- I must have the disk partitioned
- Windows XP must be installed first
- I have to play with the boot.ini
- If i install vista32 it will be more successful
The errors I have gotten -STOP: 0x0000008E - i researched this and it said one option is to take out the excess RAM
I will be happy if - By the end of this weekend I can successfully run XP or both OS's in dual boot.
I need to go through all this trouble because - Digidesign has not written software for 64 bit proccessing yet. I need to make music.
Partitioning HD: Minimum Shrink Existing Partition Around 176gb?
Mar 29, 2008I have Vista Home Premium preloaded on a Dell Inspiron 1520 with a 320gb hard drive. I would like to isolate the OS from my data by shrinking the OS partition to 42GB and creating another partition for my data. However, Vista's partitioning utility says the minimum I can shrink the existing partition to is around 176gb. I suspect that even though I have defragged the hard drive, there is some part of the OS that is sitting on the drive out far enough to cause this. I can't verify this because Vista's defrag utility doesn't show you a map of the drive during defrag. Anyone know of a way around this?
View 8 Replies View RelatedShrink Volume & Create New Partition Using Disk Management Console
Jun 2, 2009I downloaded Windows 7 RC1 with the intent of adding a partition to my HDD and dual booting. My understanding is that I would need a 16GB partition. My Disk Management Console tells me I have two existing primary partitions (expected). D (the recovery partition) is 6.62GB. The other (C) makes up the difference (~142GB) and has 47.1GB free space. When I begin the "shrink volume" process, it says that only 3MB is available to shrink C. I checked the page file and it has less than 3GB allocated to it. So, I have two questions. First, why isn't more shrinkage ;>) space available? Two, assuming that with your help I can find more space, if I try to create a 16GB partition from C will I significantly affect computer performance?
View 9 Replies View RelatedDisk Management, Shrink The C Drive (Vista Drive)
Dec 12, 2008I want to shrink the C Drive (Vista Drive). Actually 111GB is free out of 236GB on the C Drive but I am only about to Shrink 6GB and even when I try to Shrink the Drive by 6GB I get an error. I want to create a new partition on my hard-disk. These are the screen shots:
View 6 Replies View RelatedUnable To Create New Partition
Dec 26, 2007I'm trying to partition drive C but it won't let me. New laptop is Toshiba Satellite and had the store configure it for me since I'm new to Vista.
1. Through Disk Management, I shrink drive C and now have an unallocated space of 51G.
2. From the unallocated space, I create a new simple volume. It goes through the Wizard, but then I get the following error message: "The attempted operation is invalid. Either the parameters specified are invalid or the operation cannot be completed on the selected object."
3. The contour of the unallocated space is highlighted in black instead of green. Is that an indication of something? And shouldn't it say: Free space instead of unallocated? Additional info:.....
Unable To Format Vista Partition
Mar 1, 2010im trying to reformatt my vista partition. Because I feel like it, and its getting a bit laggy.
But anyways, I go and click on computer->vista drive->format->quick format-> error unable to format.
why does this happen!
Unable To Create New Visible Partition
Jul 27, 2009I have just purchased an Acer Aspire 8935g laptop, which comes with Windows Vista Home Premium 32bit (not sure why 64bit isn't supplied). It has two 500gb hard drives; Disk 0 and Disk 1. Disk 1 is empty and I have successfully created 3 partions on this drive. According to Vista's Disk Management tool, Disk 0 contains three partitions. The first and last are both EISA Configuration partitions and can't be seen through Windows Explorer. The 2nd (middle) partition is the C: partition on which Vista is installed.
I want to install Windows 7 RC 64bit in a dual boot configuration, so I used Disk Manager to shrink the C: partition and then create a new 100gb partition. I assigned it the drive letter B: (there are no floppy drives on the laptop). The new B: partition is visible, along with the original C: partition through Windows Explorer, until I reboot the laptop. The B: partition then disappears and Windows Explorer can no longer see it, however Disk Management shows it is still there but it no longer has a drive letter and is now an EISA Configuration partition. I thought this issue might be caused by the choice of drive letter so I tried again using a different letter (F: ). Each time the drive is only visible to Windows Explorer until the laptop is rebooted. I've also tried using a different partition management tool (Partition Wizard) but it makes no difference. I've tried creating the partition as logical and primary but to no avail. explain Why can't I create a visible partition on my "O/S" drive?
Unable To Delete Partition For Fresh Install
Sep 12, 2009I am having some problems with my drivers so I am trying to delete the partition on the operation system drive and do a fresh install, operating system and drivers. However, no matter what I do I cannot get my computer to boot from the windows vista DVD so I can delete the OS partition. Here is what I already tried:
- My BIOS is set to boot from CD ROM first
- I have tried both DVD drives
- I verified that the DVD is good by trying it in a different computer where it will boot from the DVD drive
- The DVD drive works because I can initiate installation from the DVD drive. But since it isn't on start-up, I cannot delete the partition and all the drivers.
How do I get this dang computer to recognize this DVD on boot?
Windows7 Unable To Find Partition Error 0x80070490
Oct 26, 2009running XP try to install 7 but get a error message unable to find partition error 0x80070490. i ran compatability which stated ok
View 9 Replies View RelatedUnable To Install Get This Error Message Partition Of 40.8 GB For Installing Vista
Apr 16, 2009i m trying to install vista and i get this error message: I have a partition of 40.8 GB for installing vista. I m using a 80 GB hard drive.
View 9 Replies View RelatedEthernet Hard Drive: Both Operating Systems Unable To Browse Drive
Apr 17, 2008I was wonder if anyone know a solution for the following problem. I have a ethernet hard drive and I've never had a problem until using vista and windows server 2008. both operating systems are unable to browse the drive, instead it completely crashes explorer.exe. Windows server 2003 & XP have never had trouble.
View 6 Replies View RelatedHard Drive Partition
Apr 9, 2009want install Vista Home premium on notebook with 320GB hard drive(comes with Linux by default). What size partition should I set for operating system?
View 9 Replies View RelatedCant Partition A WD Hard Drive.
Apr 27, 2008Recently installed Vista Ultimate x64. Immediately updated with Windows update including SP1. Went to partition a WD 3200AAKS which was to be used for storage and backups. Drive is shown in Bios, Device manager, and Disk manager and drivers installed. Connected by Sata to the board. Started partitoning by shrinking the volume, and then choosing New Simple volume in the unalloacted space. It hangs at this point but a new "Other Device" is shown in device manager. Checked and it is identified as generic Volume, so I attempted to install drivers with no success.
Went through all the steps including the Microsoft fix which of course failed for this. Also used browse to point to inf and driverstore. Nothing worked. Initially got the message "The system cant find the file specified" and followed all the driver install procedure from there. Almost sounds like a problem similar to the USB problems. Any suggestions. After all this I have to delete both to get the entire drive back.
Partition (Adding X64 To X32 1TB Drive)
Jun 2, 2009Partition Issue (Adding Vista x64 to Vista x32 1TB Drive) My 1TB drive is set up as follows:
C: Vista x32 IE7 + VMwares 300GB (Primary)
D: Vista x32 IE8 50GB (Primary)
E: XP IE6 50GB (Primary)
F: XP IE7 50GB (Extended)
G: XP IE8 50GB (Extended)
H: Win7 IE8 50GB (Extended)
Unallocated 60GB
I need to put a new Vista x64 in 50GB of the remaining Unallocated space but keep getting this error when trying to partition/format it: "Disk Management: You cannot create a volume in this unallocated space because the disk already contains the maximum number of partitions." I understand that we only get 4 primary partitions. How can i add this unallocated space to the Extended Partition, and thereby make a partition within it to load Vista x64 to boot up like all the others?
Can Not Open Partition Drive
May 15, 2010Everytime i tried to open my partition drive (Drive D) where all my work files are located. message will keep popping up and prevent me from accessing my file.
View 4 Replies View RelatedShould I Partition? (new To Vista With New 750 Gig Hard Drive)
Mar 21, 2009I am getting a new HP today with a 750gig hard drive. Vista Home Premium. 64 bit SP1. I've never used Vista. I seem to recall hearing in the past that partitioning a drive so large is better than having it be just one 750 gig unit. If so, I want to partition it optimally from the outset. So:
1) SHOULD I partition my 750 gig C drive?
2) If so, how is it done? Do I go to Computer > Manage > Disk Management like in XP? (I've never used Vista.)
If I should do it, will I need to reformat to NTFS or will it already be NTFS? And should I use the "Quick format" option or the slow version? (Never did know the difference when I reformatted external drives, but I used the fast version.)
On my external drives I erased everything and then reformatted. Obviously I won't want to do that here, as it comes loaded with the operating system and MS Works, etc. So how do I partition without erasing files?
Remove Vista On Drive 1 , Partition C:
Nov 17, 2009I have two hard drives ,each hard drive is partitioned into 2.
Drive 1
Partition C:
Partition D:
Drive 2
Partition E:
Partition F:
I have Vista Home Premium on C: Drive. Have Windows 7 on E: Drive. My Boot File is on the C : Drive for both Operating Systems. If I want to remove Vista on Drive 1 , Partition C: First of all what would be the easiest way of removing Vista? Reformat the drive or can you uninstall it with the programs?? If I do Format the C: Drive,I would loose the Boot Manager File. I would probably not be able to even boot into Win 7. If I can not boot into 7 Can I insert the DVD do a repair to bring back the Boot file to C:? Or can I just use a second party Boot Manager like Easy BCD to configure Boot manager??
Installing Win64 On A Partition Drive
May 25, 2009I have Windows Vista Home Premium x64. and I am trying to boot up my computer with an XP64 CD. it goes into the Windows Setup blue screen and runs all of that, after it is finished it gives me the blue screen of death saying that an error occured and has prevented me from continuing. I don't understand why?? I tried to do stuff in BIOS settings in order to have it work right but my computer is dumb.
View 5 Replies View RelatedWhen Doing An Install Of Win 7, Does The Entire Drive Get Wiped, Or Just The C Partition
Aug 23, 2009When doing an install of Win 7, Does the entire drive get wiped, or just the C partition? I'm thinking of course of maintaining the recovery partition.
View 9 Replies View RelatedPartition: Allocate About 100GB For System Drive
Mar 31, 2008i just install vista x64 on RAID 0 (2 X 250 Gb) volume. Volume space is 465 GB (instead of 500 GB! that?s alright), free space 451 GB, so it took 14GB on OS and Page File. Now i want to partition it and want to allocate about 100GB for system drive i think which is more then enough.::
::But the problem is, on Disk Management when i select the volume and click shrink Volume i get followings::
::Total size before shrink in MB: 476943::
::size of available shrink space in MB: 235606::
::Enter the amount of space to shrink in MB: (235606)::
::Total size after shrink in MB: 241337::
::so i can't shrink the volume less then 241337. that means it forcing me to keep the system drive about 235.68 GB! which is about the size of one of the hard drive (232.8 GB). So... what is going on? why its forcing me to keep the volume that large??::
Messed Up Hard Drive From Using Partition Magic
Dec 23, 2009I wanted to use Partition Magic to partition my hard drive, so I used the boot CD. When I loaded it up, it said that there were 2 errors in my hard drive and it could fix them, so I pressed fix. Unfortunately, I was running Vista and I only know now that they're incompatible. However, now my hard drive is completely screwed! If I plug my hard drive into my computer, my computer refuses to do anything after POST, it doesn't boot a CD or run anything from the hard drive. I unplugged my hard drive and it's booting CDs now, even though my CD was the primary boot device anyway. All I want to do now is just get my hard drive fixed, I have all my data backed up, so I don't care if I lose everything on it!
View 7 Replies View RelatedDrive Letters & Partition Contents Swapped
Jan 3, 2009after shrinking the D: partition, the drive letters and actual partition sequence on the drive changed - the C: (Vista) partition has switched places with the D: (Recovery) partition in Disk Management (D: is now in front of C I first defragged the D: drive using JKDefrag and used its built in feature to move all the files to the end of that partition, so that after splitting D:, the blank portion would be next to the C: partition (so I could have it merge with C: ) how do I get the partitions back to their normal positions (in Disk Mgmt)? and if I delete the D: partition, will it merges with C: and keep my Vista install harmed?
View 4 Replies View RelatedWeird Hard Drive Partition Can't View
Apr 8, 2010I have this weird primary partition on my hard drive. It use to be my D: volume but something happened causing it to lose its drive letter and NTFS file structure. Whenever I right click it to view properties or format it the only option I have that isn't grayed out is "Delete Volume". I would like to know if there is a way to view the volume before I delete something that my be important for my system. The first attachment is a screen shot of Disk Management. The second attachment is a screen shot of my options after a right click. If I can't view it I will consider deleting it due to the fact it takes up have my drive. BTW, the third attachment is the model specs of my HDD. I'm just going to delete the partion and reformat it.
View 4 Replies View RelatedExtend C: Partition Drive, NTFS System Boot
May 2, 2010I am runnig out of space in the C drive, but have plenty of space in D drive. How do I allocate more space from the D drive to the C drive? As you can see I have no memory in C:. What can I do to increase it? Do not want to purchase additional programs, not enough space to install them.
View 7 Replies View RelatedXp Install: Cannot Choose A Drive Or Partition As Box Remains Empty And Nothing Shows
Mar 29, 2009Am trying to install xp on a new laptop that already has vista. Have made another partition using vista disc management. I boot to xp disc and go to install but cannot choose a drive or partition as box remains empty and nothing shows.
View 8 Replies View RelatedRecommendations On Relative Partition Sizes On 500GB Hard Drive?
May 12, 2008I'm going to get a new desktop with XP installed. I have a copy here of Vista Home Premium and I'd like to set up a dual boot. From reviewing everything I can find online, I think I can handle that. Eventually, I expect I'll migrate over to Vista most of the time. When I partition to install Vista, I understand I'll be creating a new drive letter. Any recommendations on relative partition sizes on a 500GB hard drive? But ... something I've not been able to locate is whether, once I install Vista and then install Office 2007, presumably under Vista, whether I'll be able to access Outlook, Excel, etc. from either OS - will I be able to open my Outlook 2007 if I boot into XP? Will one version of my browser run from either OS?
View 4 Replies View RelatedUnable To Create New "visible" Partition
Jul 29, 2009I have just purchased an Acer Aspire 8935g laptop, which comes with Windows Vista Home Premium 32bit (not sure why 64bit isn't supplied). It has two 500gb hard drives; Disk 0 and Disk 1. Disk 1 is empty and I have successfully created 3 partions on this drive. According to Vista's Disk Management tool, Disk 0 contains three partitions. The first and last are both EISA Configuration partitions and can't be seen through Windows Explorer. The 2nd (middle) partition is the C: partition on which Vista is installed.
I want to install Windows 7 RC 64bit in a dual boot configuration, so I used Disk Manager to shrink the C: partition and then create a new 100gb partition. I assigned it the drive letter B: (there are no floppy drives on the laptop). The new B: partition is visible, along with the original C: partition through Windows Explorer, until I reboot the laptop. The B: partition then disappears and Windows Explorer can no longer see it, however Disk Management shows it is still there but it no longer has a drive letter and is now an EISA Configuration partition. I thought this issue might be caused by the choice of drive letter so I tried again using a different letter (F. Each time the drive is only visible to Windows Explorer until the laptop is rebooted. I've also tried using a different partition management tool (Partition Wizard) but it makes no difference. I've tried creating the partition as logical and primary but to no avail.