I am runnig out of space in the C drive, but have plenty of space in D drive. How do I allocate more space from the D drive to the C drive? As you can see I have no memory in C:. What can I do to increase it? Do not want to purchase additional programs, not enough space to install them.
View 7 RepliesI'll be glad if you could help me. I bought a new PC with a 500Go HD. I installed Vista Home Premium on a partition of 100Go (C. I have therefore another partition for the remaining (D:, 400Go). I'd like to avoid using third party software ; is it possible trough Windows Vista ? I read things on Microsoft website regarding the deletion and creation of partition, but never managed to find out an answer for my particular question.
View 8 Replies View RelatedI have just spent all day, literally, formatting and partitioning my 500gb SeaGate Free Agent. As of now, it is 32gb FAT32, and the rest is NTFS. My question is, can I use the Extend/Shrink Volume tools to decrease the maximum capacity of the NTFS format and therefore increase the maximum capacity of the FAT32 format, as I need more than 32gb. If not, how can I achieve this on Vista?
View 4 Replies View RelatedI recently acquired a Dell Studio XPS 435 desktop with Vista Ultimate as the OS. My plan is to upgrade to Windows 7 in the next couple of months or so. Therefore I won't need the Vista recovery partition on the hard drive. I am trying to eliminate it and add to the C: drive partition. Looking at my drive 0 in disk management I have from Right to left a C: partition 683Gb NTFS with the usual Healthy (System, Boot, Page File, Active, Crash Dump, Primary Partition). Directly to the left is the Recovery or D: drive which is 15Gb NTFS marked Healthy (Primary Partition) and finally to the left is the last partition of 71Mb marked Healthy (EISA Configuration). No idea what that is. Right clicking in the Recovery partition gives several options including: format, shrink volume, extend volume, delete volume, mark volume as active, change drive letter and paths, as well as help.
My question is how to remove the recovery partition and then extend the C: partition. My first thought is to format the recovery partition, delete the volume and then right click the C: drive partition and extend it but I really need some advice so I don't screw up the whole disk. For instance I have no idea what if anything hapens to the drive letters.I think maybe what I am calling partitions are really volumes so you can see I am over my head here.
i had 3 partitions on my HDD. i backed them up and deleted them to make room for a custom partition. when i finished deleting them the disk management said i had 2 unallocated partitions. i checked in disk part and it showed only my "main" vista partition existed. my vista partition is "partition 2" and i was able to extend it into "partition 3" (one of the unallocated partitions) via disk management, but i cant add "partition 1" (also an unallocated partition) to my main partition.
View 9 Replies View Relatedhow to delete a partition and extend the volume, and it seems pretty basic. I do have a question though. My C partition is 50GB, and I have a new volume E partition of 100Gb. I also have unallocated space left of 550Gb (750Gb seagate). I think I want to just want to have one big partition. Not sure if it's a good idea, but I was wondering if I need to go ahead and format the unallocated space first, or will I have an option to do it? I did right click on it, and I got an option to make it a simple volume or something similar, but thought I'd wait a bit on that.
View 5 Replies View Relatedso here is my problem. I partitioned my c drive to make room for a test windows 7 install. well apparently my DVD burner hates me, so i never got the chance to try it out. The partition is 30GB. Now it says free space. but i cant extend my main partition back to it was. It says it's an extended partition. Do i have to make it primary to extend the c drive? And if so, how would i go about that? It also asked me, when not a drive, if i wanted to delete the partition... Would that make it primary? It says the partition will become inaccesible if you delete it...
View 5 Replies View RelatedCan vista 32 pro install on an ntfs partition formated with 16k clusters. If so how can I format the drive to 16k clusters using the vista boot cd, are there any steps or commands I need to do during the boot sequence? And are there any "stable" third party programs or suggestions so I don't have to dump the current os that is on the drive? As I believe that the image file restores the cluster size.
View 9 Replies View Relatedi have linux ubuntu 8.10 and im changing to vista when i boot from dvd and get to choose partition part i click format drive and it sais error 0x8004005. partition needs to be NTFS. how do i make this partition NTFS and format it so i can have vista?
View 6 Replies View RelatedI am used to dual booting xp O/S and typically I keep one partition NTFS (everyday usage) and the other FAT32 (software testing). This is so when I boot into my FAT32, my NTFS is hidden and the primary drive is C:
I bought a new desktop with Vista intalled on it, I have successfully partitioned and dual booted with XP. Vista is NTFS and XP is FAT32, when I boot into the FAT32 XP, the primary comes up as H: and the C: is still the Vista partition which
easily browsable? Why can XP read Vista NTFS partition?
Can vista 32 pro install on an ntfs partition formated with 16k clusters. If so how can I format the drive to 16k clusters using the vista boot cd, are there any steps or commands I need to do during the boot sequence? And are there any "stable" third party programs or suggestions so I don't have to dump the current os that is on the drive? As I believe that the image file restores the cluster size.
View 6 Replies View RelatedI bought a new laptop with Vista already installed on it. I want to install XP in a multi boot configuration but get stuck in Disk Management and am unable to proceed from there. I'd like to keep Vista on my laptop, but if it comes down to it I'll need to take it off and put on XP because our work computers run with XP and we do a lot of work on reports and presentations from home and network from home. I can't find the New Partition Wizard to make a space for XP.
View 6 Replies View Relatedi just install vista x64 on RAID 0 (2 X 250 Gb) volume. Volume space is 465 GB (instead of 500 GB! that?s alright), free space 451 GB, so it took 14GB on OS and Page File. Now i want to partition it and want to allocate about 100GB for system drive i think which is more then enough.::
::But the problem is, on Disk Management when i select the volume and click shrink Volume i get followings::
::Total size before shrink in MB: 476943::
::size of available shrink space in MB: 235606::
::Enter the amount of space to shrink in MB: (235606)::
::Total size after shrink in MB: 241337::
::so i can't shrink the volume less then 241337. that means it forcing me to keep the system drive about 235.68 GB! which is about the size of one of the hard drive (232.8 GB). So... what is going on? why its forcing me to keep the volume that large??::
Somehow I managed to mess up my boot disk by converting it to dynamic. Now whenever I boot, I need to: This will now let that drive boot. I'm running Vista Ultimate with several SATA and USB drives attached - the boot drive is SATA. I also see a strange drive in disk manager (once it's booted) showing as "foreign" a 479mb partition that I don't recognize. I'm tempted to delete it, but won't until I know that it wouldn't hurt anything. Is there anything that I can do to avoid this process every time I reboot?
View 9 Replies View RelatedI have a dual-boot setup. Volume C runs Vista Home Premium. Volume F runs Vista Ultimate. (Vol. D is a recovery volume.) I would like to blow away C: and boot only from F. Would the following be a possible/advisable solution?
1. Boot from F.
2. Delete C.
3. Rename F "C".
4. Expand F (the new "C") to include the old C.
I'm using HD from my old computer (XP) as an external drive on my Vista laptop. The HD has XP on it. When I power up it looks like the HD is trying to boot XP on top of my Vista and freezes the system. How can I avoid this attempted boot? Where should I place the jumper on the HD.
View 8 Replies View RelatedI have a Vista Home Premium system that will not start. It gets as far as the system bootup progress bar, tries to start then suddenly the system shuts down. I have tried every possible recovery/repair technique I could find and still no luck. The system is using a Intel motherboard with Matrix Storage RAID which I have configured as RAID 1. In the repair console (from Vista DVD) I can read the drive from a prompt window so I assume the data is safe. I would like to back up the user data (photos, docs, email) and do a reinstall without the RAID 1 configuration. I have heard there are problems with Vista and the Matrix Storage controller.
Question is: How would I go about backing up a non-bootable Vista drive? I have another system running XP pro that I could mount the Vista drive to and copy the data to a portable USB drive. Is this a possibility? Will I run into any "access denied" issues when saving the data off to a backup drive? Also, the system was using Outlook 03 for email. What is the best way to recover the Outlook email data (messages, addresses, etc.) from a non-bootable disk? Is this email data in the same location as it is with XP?
I have an eSATA drive formatted NTFS from my XP installation. Drive works fine from either XP or Linux (multi-boot machine) I had previously tried Vista on the machine but it saw the eSATA drive as unformatted. Gave the message "Do you want to format this drive?"
Very dangerous as an unknowing person may have actually formatted the drive and lost all their data. Interestingly enough, any time I've tried to access the drive, Vista ran a chkdsk on it at the next boot up. CHKDSK from Vista saw it fine and reported no errors. but could not read the drive once booted to the desktop. I eventually gave up on Vista and just did a Win7 install yesterday.
If I install XP as a virtual machine under Vista, will XP still overwrite the MBR on the system drive or is the entire XP boot process virualized?
View 5 Replies View RelatedWhat happens when you attempt to install Windows 7 on a drive with NTFS version 1.2 (or some earlier version... like 1.3, etc)? Does it alter the file system? Any way to force Win7 to use the older file system? I'm hoping for performance improvements due to less features in older NTFS, but I know little on the topic.
View 6 Replies View RelatedI have just received my Gateway computer. Hard drive (300 GB) is partitioned into C 290 GB and D 10GB. I want to change that. Using Disk Management I used 'Shrink volume' menu reduce C drive to 180 GB and received 110 GB unallocated space. Now I would like to add that unallocated space to D drive, however "Extend volume' menu on D drive is greyed out.
View 6 Replies View RelatedI've got a system that has XP on an IDE disk (the primary boot drive), and I've got a copy of Vista on my SATA second drive. I was double-booting so that I could experiment with Vista to see if I was ready to move to it, but my time has run out. Suddenly the IDE drive with XP on it has started to fail, not quite catastrophically but enough so that I can't boot into the XP partition, and I'm moving my operation over onto the Vista partition. And I'm going to have to remove the failing IDE drive and replace it with a new one.
Unfortunately the master boot record is on the failing IDE drive. I've been looking around on the web for repair tools and it looks like the Recovery Environment that you can get to by booting from the installation DVD will do the job, but can anyone give me a cookbook approach to getting this fixed? I don't know what I need to do about a boot sector, whether just repairing the MBR is all I have to do, and so on and so forth.
I am Using Vista Ultimate 64. I would like to tranfer my entire drive incuding all files and the Operating system From my current IDE HDD to a new SATA Drive of the sames size (500 Gig) I need the IDE Drive for an older computer ( The 40 Gig IBM Deathstar still functions great, but all programs seem more bloated these Days)
Anyway I went to Administrative Tools and Formated the New Drive NFTS with no Drive Letter. But I cannot get it recognized as a transfer device when I go to system backup. Can I use 'C' on the second and soon to be only drive? If I have to use E or F for now can I change it back later. would that affect the file system? I intend to Low level Format the IDE and try cloning the old machine's XP Drive (32 bit) to it in the second place.
I've got a really weird scenario: I've installed Vista on one of my partitions, after a few days it got corrupted, so i've installed another version on a different partition (different disk as well). I've since deleted the first vista installation. Now vista works perfectly on my other partition, no problems. However, when looking at the disk management I can see that the old vista partition's status is:" Healthy (System, Active, Primary Partition)" whereas my working vista partition is: "Healthy (Boot, Page File, Active, Crash Dump, Primary Partition)" My vista partition is not a system partition. This causes some problems, as I can't format the old vista partition. Trying to disable the disk at startup and booting with the Vista DVD doesn't help (it recognizes some problem but when rebooting, nothing happens, no loading of anything).Is there a way to assign the 'System' attribute to another partition and/or to remove the 'System' attribute from a partition?
View 4 Replies View RelatedI was having problems with VistaHP and thought that I could kill 2 birds with one stone by adding a new Hard Drive and reinstalling Windows VistaHP. For information purposes, the original HD was Partitioned into "C" (OS), "D" data files, "E" (Photos) and "F" Extra storage (for future use). In any event, I did not have the proper cables available so I REMOVED the original HD and placed the new HD in my system and installed VistaHP and Partitioned the new HD in to 4 Partitions also and installed all my software programs, data files, apps, ...... on the new HD.
Everything appeared to be fine and a couple of weeks later, I placed the orginal HD back in the system with the intentions of Re-Formatting the drive for additional stirage (and using the new HD as the Primary Drive). This went "semi-OK", I was able to reform and re-label most of the Partitions on the original HD except for the Partition that contained Vista and at the moment, when I go to My Computer I have Local Disk "C" (39.8GB free of 82.7GB), Old C Drive "D" (13.4MB free of 125MB), "G" Data Files (29.8GB free of 36.8GB), "H" Photos (181GB free of 194GB), "I" BU (82.5GB of 151GB), "P" Extra Space (352GB free of 352GB) and "Q" More Extra Space (45.4GB free of 95.3GB).
My objective / what I would like to do, is DELETE and / or Re-Format the "D" (Old C Drive) which I was able to get down to 125MB but as best as I can tell, the Drive contains the following file 125.5MB with 107.8MB Used and 17.7MB Free and the following folders:
$RECYCLE.BIN, BOOT, System Volume.
on a xp PRO pc, I installed a fresh copy of vista business edition. I must have missed the option for dual boot, It did install on a separate partition which was an empty E: for the XP system ( 4th partition on the large drive. now the once E; drive is C; and what was C: is not the e: drive. there seem to be no setting for me to allow optionally boot into the old xp pro which is still in the now active boot partition.
View 7 Replies View RelatedI recently enabled RAID on my system with 2 brand new 250GB drives. I partitioned the drives into 3 partitions each about 155GB each. I then installed XP and assigned it the 1st partition. XP called it the C drive. The other partitions were automatically called D and E once in XP. I then installed Vista WITHIN XP and choose the second partition "D" as XP reported it to be. Vista installed fine, but once booted up (dual boot), vista reports itself as installed on drive D. Shouldn't Vista automatically rename its drive to C? And XP would be on drive D? and the open partition left for E while IN vista? A friend of mine has XP and Vista dual booted and his rig and when in XP, the XP drive is C. When he is booted in Vista, then Vista is drive C. And either of the OS's drop to drive D depending on which OS he is booted into. I wonder if the way I installed Vista though XP has anything to do with this?
View 5 Replies View Relatedfirst of all, il explain what exactly i wanted to do with my laptop which is currently running a Vista Home Premium 32bit. I needed to install an 64bit ver of XP Pro on a 2nd partition and set it to dual boot. My laptop is a Fujitsu-Siemens and has a single WD 250GB Sata HD and my processor supports 64Bit OS. I followed the instructions on the forums on how to shrink a partition and create a new one for the second OS(XP). However, after going through the procedure i placed the XP disk in the tray and booted from it. It was loading just fine then suddenly after i press enter when i was asked to continue to install, it mentioned later that it could not detect any hard drive or that i need to disable any program or whatever. I figured maybe theres a setting in the bios but i found nothing i can do with the HD settings. Im not familiar with Vista so i need to know is there any possiblility to install the XP OS. Also, i was wondering if the manufacturer locked the HD and maybe the only way is to reformat the HD and reinstall everything.
View 7 Replies View RelatedI bought a downloaded version of Vista from Microsoft. I did not get a CD or DVD. I installed it with a dual boot putting Vista on a little partition so I could see how I liked it. No I am ready to wipe out my XP and Previous Vista and start over. However all I have is this big zip file and unpacked there is no documentation or anything for that matter on how to make a disk, or make a disk from an ISO file.
View 4 Replies View Relatedpartition on his 1 terabyte HD with Windows 7 premium installed. In Computeradmin. it shows: The HD is partitioned with: boot partition without a letter - 100 MB. OEM partition also without a letter - 20 MB.
C: partition, system - 945 GB.
D: partition, Recover- 20 GB
All partitions are Simple, fundamental, primary partitions. I did reduce the C-partition from 945 to 439 GB. Then I would make a new simpel partition on the unallocated part. I right clicked to create a simple partition, but it said all partitions would be converted to dynamic dishes. I would only have a simple partition, but there was no such choice.
Been lurking for a bit, just signed up. Built the system in my profile. I am learning Vista so will probably have lots of questions.
I originally loaded Vista 64 on a 65GB OZ SSD. Seemed to be quickly filling up without any major software load, so decided to put the OS on my 500GB drive. Put the page file on the SSD, and user folders on the 1TB data drive. I saw a couple of posts here saying that the OS will work better/faster on a smaller partition. What size partition would you recommend for Vista 64 on the 500GB drive?