Disk Management: Remove The Recovery Partition And Then Extend The C: Partition
Oct 5, 2009
I recently acquired a Dell Studio XPS 435 desktop with Vista Ultimate as the OS. My plan is to upgrade to Windows 7 in the next couple of months or so. Therefore I won't need the Vista recovery partition on the hard drive. I am trying to eliminate it and add to the C: drive partition. Looking at my drive 0 in disk management I have from Right to left a C: partition 683Gb NTFS with the usual Healthy (System, Boot, Page File, Active, Crash Dump, Primary Partition). Directly to the left is the Recovery or D: drive which is 15Gb NTFS marked Healthy (Primary Partition) and finally to the left is the last partition of 71Mb marked Healthy (EISA Configuration). No idea what that is. Right clicking in the Recovery partition gives several options including: format, shrink volume, extend volume, delete volume, mark volume as active, change drive letter and paths, as well as help.
My question is how to remove the recovery partition and then extend the C: partition. My first thought is to format the recovery partition, delete the volume and then right click the C: drive partition and extend it but I really need some advice so I don't screw up the whole disk. For instance I have no idea what if anything hapens to the drive letters.I think maybe what I am calling partitions are really volumes so you can see I am over my head here.
View 6 Replies
ADVERTISEMENT
Jan 14, 2009
I think I messed up my hard drive while trying to erase the EISA partition on it. It's a Gateway P7811-FX laptop with a single 200 GB hard drive. Before, I only had 1 main partition: the C: Drive (176.31 GB), along with the hidden 10 GB EISA partition. After making recovery disks, I followed this tutorial: Delete and Remove to Unlock EISA Hidden Recovery or Diagnostic Partition in Vista » My Digital Life
Following that, I went in Disk Management. The hidden partition showed up, but I couldn't extend the C drive to use the unallocated 10 GB, so I converted it to a simple 10 GB volume. Then I used Acronis Disk Director Suite and merged the two partitions. And now, I can't do anything in Disk Management. There's only one partition now (186.31 GB), but when I right click on it, there's no options to create, shrink, delete, or extend the partition. They were there before, but the only option that shows up is Help.
Under Status, it says Healthy (Active, EISA Configuration). I think I merged the partitions the wrong way, so now there's no "System, Boot, Page File..." partition. Everything is on the EISA partition. When I try to run Acronis, the program doesn't load up. I've tried using Diskpart but I can't create any new partitions either.
View 9 Replies
View Related
Jul 26, 2009
I've got a Hp computer that has Vista Home Premium 64 bit on it and I want to remove the partition D which is the recovery partition. I have factory backup dvd's, made my own backup dvd's and have a True Image of the drive with both partitions, so I think I'm covered. Anyone know how to go about removing the complete partition?
View 5 Replies
View Related
May 14, 2007
By a process too tedious to recount I've wound up with the following primary partitions on disk 0 of my laptop, a Compaq Presario R3275US with a 75-gig hard drive:
C: System (43 gig)
D: Local Drive (15 gig)
G: New Volume (15 gig)
Is it possible to combine the empty G with the non-empty D without erasing the latter in the process? If so, how can that be done?
View 6 Replies
View Related
Aug 12, 2009
I refer specifically to this Tutorial;
Disk Management - Shrink Partition
A bit of background first. I have recently had installed a new 320GB Hard-drive to my Laptop [see my Specs]. The allocation of partition [volume] space has been divided evenly between the C:[Acer] - 139GB, and the D:[Data] - 138GB, Drives on the HD.
This is what I have;
Questions;
Question 1; Is this setup division just the 'norm' for allocating volume space for each drive? In this case it is more or less a 50:50 share of the available space [PQ Service on a hidden partition takes up the rest]....why not 65%[C]:35%[D]? Question 2; Is it necessary for the partition volume of the Data drive to more or less mirror that of the Acer drive? Question 3; If answer to Q2 is 'not necessarily so', am I then able to partition the Data drive to create a new drive partition of about 60GB, or are there any pitfalls in playing around with this particular drive? If possible, I'd like to create a new drive on the HD for personal data storage.
View 9 Replies
View Related
Jun 2, 2009
I downloaded Windows 7 RC1 with the intent of adding a partition to my HDD and dual booting. My understanding is that I would need a 16GB partition. My Disk Management Console tells me I have two existing primary partitions (expected). D (the recovery partition) is 6.62GB. The other (C) makes up the difference (~142GB) and has 47.1GB free space. When I begin the "shrink volume" process, it says that only 3MB is available to shrink C. I checked the page file and it has less than 3GB allocated to it. So, I have two questions. First, why isn't more shrinkage ;>) space available? Two, assuming that with your help I can find more space, if I try to create a 16GB partition from C will I significantly affect computer performance?
View 9 Replies
View Related
Nov 4, 2008
I have a Compaq machine with HP software. My machine is running slow (it has a 2.5 rating) and four files come up missing when it boots. I would like to reinstall VISTA (or preferably XP if I can get a copy). I got the computer from a friend who does not remember what disks, if any, came with it. I have SP1 installed but I do not have a recovery disk or an original installation disk. How would I know if there was a installation or recovery disk? Would I likely get anywhere asking Compaq or HP for help?
View 5 Replies
View Related
Jul 19, 2009
I have an old machine i am giving away and decided to use the free upgrade disk sent to me back in 2007. It installed fine and I got SP1 on it and cleaned it up. After everything was done I noticed the E-Machines recovery partition was wiped. Is this because I now have the Vista upgrade disk with the # on that for the COA? Not the sticker on the machine.....I had to activate it with the # on the upgrade disk. I can't figure out why it would wipe the recovery partition with the factory XP image on it. Will this disk work if the next owner needs to do an install? Have you heard of this happening with OEM upgrade disks?
View 4 Replies
View Related
Sep 10, 2009
i had 3 partitions on my HDD. i backed them up and deleted them to make room for a custom partition. when i finished deleting them the disk management said i had 2 unallocated partitions. i checked in disk part and it showed only my "main" vista partition existed. my vista partition is "partition 2" and i was able to extend it into "partition 3" (one of the unallocated partitions) via disk management, but i cant add "partition 1" (also an unallocated partition) to my main partition.
View 9 Replies
View Related
Mar 26, 2008
I'll be glad if you could help me. I bought a new PC with a 500Go HD. I installed Vista Home Premium on a partition of 100Go (C. I have therefore another partition for the remaining (D:, 400Go). I'd like to avoid using third party software ; is it possible trough Windows Vista ? I read things on Microsoft website regarding the deletion and creation of partition, but never managed to find out an answer for my particular question.
View 8 Replies
View Related
Dec 22, 2007
how to delete a partition and extend the volume, and it seems pretty basic. I do have a question though. My C partition is 50GB, and I have a new volume E partition of 100Gb. I also have unallocated space left of 550Gb (750Gb seagate). I think I want to just want to have one big partition. Not sure if it's a good idea, but I was wondering if I need to go ahead and format the unallocated space first, or will I have an option to do it? I did right click on it, and I got an option to make it a simple volume or something similar, but thought I'd wait a bit on that.
View 5 Replies
View Related
Aug 11, 2009
so here is my problem. I partitioned my c drive to make room for a test windows 7 install. well apparently my DVD burner hates me, so i never got the chance to try it out. The partition is 30GB. Now it says free space. but i cant extend my main partition back to it was. It says it's an extended partition. Do i have to make it primary to extend the c drive? And if so, how would i go about that? It also asked me, when not a drive, if i wanted to delete the partition... Would that make it primary? It says the partition will become inaccesible if you delete it...
View 5 Replies
View Related
May 2, 2010
I am runnig out of space in the C drive, but have plenty of space in D drive. How do I allocate more space from the D drive to the C drive? As you can see I have no memory in C:. What can I do to increase it? Do not want to purchase additional programs, not enough space to install them.
View 7 Replies
View Related
Jun 2, 2009
A customer asked if he created the recovery disc would he still have a complete working recovery partition. He is in fear of creating the disc then losing them.
View 4 Replies
View Related
Jun 2, 2009
4JHA.3676@TK2MSFTNGP06.phx.gbl> A customer asked if he created the recovery disc would he still have a complete working recovery partition. He is in fear of creating the disc then losing them.
View 8 Replies
View Related
Sep 23, 2009
I want to create a recovery partition on my windows Vista laptop. Pretty much i want to be pompted when the pc boots to hit f10 and have a count down of 10 seconds. I know this would be done through boot.ini however i have no idea how to do so. Also id make a seperate partition on my hd of ten gigs just for the backup image.
View 6 Replies
View Related
Mar 24, 2008
To make sure Vista would work with all my hardware and programs, I created a second partition on my XP machine and installed Vista on there (Vista Home Premium). All my hardware and my important programs worked so I thought I'd bite the bullet and upgrade my XP installation on the first partition. That also worked OK (apart from losing all my Music and Videos which I am restoring from backup, at present) and I have used EasyBCD to remove the entry for the copy of Vista on my second partition but I can't seem to delete all the directories and files that are on there. It says I don't have permission to many of them. I also keep Norton Ghost backups on that partition so I don't really want to format it. As I am logged on as an Administrator, why don't I have access to everything? What can I do to allow myself to delete all the Windows files and directories?
View 7 Replies
View Related
Dec 31, 2008
My computer tells me that there is low disk space on my D:Recovery Drive. What and how can i safely remove, and will it improve my performance?
View 9 Replies
View Related
Jul 29, 2009
is it possible to create a recovery partition in my vista which will be available in the boot menu? my laptop originaly came with XP so it doesn't have one for vista. I still have the 2Gb partition left from Xp but it's now empty after vista installation. and how much space do i need to resize it for that purpose? i'm also thinking of making another recovery partition for windows 7. so i will have 4 partitions: vista, vista recovery, windows 7, windows 7 recovery. i tried to look in the tutorial section but i didn't find any. i guess it's not common.
View 9 Replies
View Related
Mar 22, 2009
1. Cheaper for the OEM
2. Users regularly delete it and consequently have to pay more money to
Micro$lut to get Windows working again. WPA and WGA serve the same purpose for Micro$lut.
View 9 Replies
View Related
Apr 9, 2010
I'd like to reclaim the 10 plus Gb on my SSD that holds the recovery partition for Vista on my Toshiba A500 series laptop.
I've already backed up the system to DVD's using the Toshiba recovery disk creator utility.
Anyone know how to reclaim the 10Gb? I'd really like to do it without losing the operating system if possible.
Also, I'm wondering if I do this and things get screwed up will the recovery disks regenerate the recovery partition and take me back to the original state?
View 5 Replies
View Related
Apr 23, 2010
I have a160GB external HD with three partitions. I took it out of a laptop (I was using it to run Windows on that laptop), formatted the 'main' partition (approx. 145GB), and installed Linux on it. The machine I was running Linux in is 'dead' now, so I want to format this 'main' partition again (in Windows), so I can use it for storage or whatever. The problem is that when I plug it into my machine running Vista, it 'sees' the 'recovery' partition (still there from when I was using it in the original laptop), but it doesn't 'see' that 'main' partition (the one I had Linux on). I went into Disk Management, and I can see all three partitions, but when I try to access that 'main' partition,it won't let me do anything with it. Right-clicking the partition brings up my options, but they're all grayed out. I realize that I can't open the partition in Windows, since it has Linux on it, but why can't I format it in Disk Management? I have no way to get into the Linux OS to try to uninstall or format it that way, since the machine is 'dead'.
How can I go ahead and format this partition?
View 1 Replies
View Related
Sep 30, 2009
If I use truecrypt to encrypt an entiredrive will it affect the recovery partitions ability to function?
View 9 Replies
View Related
Nov 10, 2009
i had company installed vista basic.. and a recovery partition of it.. now once i formatted vista and installed windows 7. for few problems i reverted back to vista. but now tht recovery image is not identified anymore.. is it like now its of no use?? can i do system image restore from recovery partition? i tried browsing and locating.. but no hope.. i will be glad if anyone knows or can tell me a way...
View 9 Replies
View Related
Dec 31, 2008
After having successfully created a set of system recovery discs which can be done only once on brand new HP Pavilion, can I delete the recovery partition to recover some space? Or is there any further use for it? And how do I find it?
View 5 Replies
View Related
Mar 31, 2009
How much recover information is in the Presario's recovery partition, PRESARIO_RP? Is there enough to fully restore the OS or just the most vulnerable parts?
View 7 Replies
View Related
Jun 21, 2009
Friend of mine was "given" a free laptop when he bought his Mazda. It came with no discs or a recovery partition. He called and told me he was fiddling with something in settings
View 8 Replies
View Related
Jul 29, 2009
I recently had to change my hard drive because the original one got bricked. I was wondering how to make the recovery drive that was on the original HDD.
View 4 Replies
View Related
Nov 17, 2009
I have two hard drives ,each hard drive is partitioned into 2.
Drive 1
Partition C:
Partition D:
Drive 2
Partition E:
Partition F:
I have Vista Home Premium on C: Drive. Have Windows 7 on E: Drive. My Boot File is on the C : Drive for both Operating Systems. If I want to remove Vista on Drive 1 , Partition C: First of all what would be the easiest way of removing Vista? Reformat the drive or can you uninstall it with the programs?? If I do Format the C: Drive,I would loose the Boot Manager File. I would probably not be able to even boot into Win 7. If I can not boot into 7 Can I insert the DVD do a repair to bring back the Boot file to C:? Or can I just use a second party Boot Manager like Easy BCD to configure Boot manager??
View 9 Replies
View Related
Mar 23, 2008
Recently replaced an ACER factory load with a clean install of VISTA Home Preimum. My HD has 3 partitions C (228gb), D (227gb), and hidden (9gb). Would like to get rid of the hidden (ACER factory load ). My HD is 500 GB and my total use is 51 GB on C. Would it make sense to create 3 partitions C (small) for Vista and applications, D (small) for data and E (whats left) for whatever. Is it possible / pratical to move the entire User folder to D or would this actually cause more future trouble than it is worth. Can any of this be done with Disk Management (when I right click on the hidden I get no options) or is a third party solution required ? Or should I just leave well enough alone.
View 5 Replies
View Related
Aug 10, 2009
Dell recovery Partition D with factory image.wim copied in drive I
external hard drive. How can i restore my laptop to factory settings
from the factory image in drive I (external hard drive) instead of drive
D (internal Hard Drive)
View 9 Replies
View Related
