Hd 3 Partitions And Can Remove Hidden Partition
Mar 23, 2008
Recently replaced an ACER factory load with a clean install of VISTA Home Preimum. My HD has 3 partitions C (228gb), D (227gb), and hidden (9gb). Would like to get rid of the hidden (ACER factory load ). My HD is 500 GB and my total use is 51 GB on C. Would it make sense to create 3 partitions C (small) for Vista and applications, D (small) for data and E (whats left) for whatever. Is it possible / pratical to move the entire User folder to D or would this actually cause more future trouble than it is worth. Can any of this be done with Disk Management (when I right click on the hidden I get no options) or is a third party solution required ? Or should I just leave well enough alone.
View 5 Replies
ADVERTISEMENT
Jan 14, 2009
I think I messed up my hard drive while trying to erase the EISA partition on it. It's a Gateway P7811-FX laptop with a single 200 GB hard drive. Before, I only had 1 main partition: the C: Drive (176.31 GB), along with the hidden 10 GB EISA partition. After making recovery disks, I followed this tutorial: Delete and Remove to Unlock EISA Hidden Recovery or Diagnostic Partition in Vista » My Digital Life
Following that, I went in Disk Management. The hidden partition showed up, but I couldn't extend the C drive to use the unallocated 10 GB, so I converted it to a simple 10 GB volume. Then I used Acronis Disk Director Suite and merged the two partitions. And now, I can't do anything in Disk Management. There's only one partition now (186.31 GB), but when I right click on it, there's no options to create, shrink, delete, or extend the partition. They were there before, but the only option that shows up is Help.
Under Status, it says Healthy (Active, EISA Configuration). I think I merged the partitions the wrong way, so now there's no "System, Boot, Page File..." partition. Everything is on the EISA partition. When I try to run Acronis, the program doesn't load up. I've tried using Diskpart but I can't create any new partitions either.
View 9 Replies
View Related
Oct 5, 2009
I recently acquired a Dell Studio XPS 435 desktop with Vista Ultimate as the OS. My plan is to upgrade to Windows 7 in the next couple of months or so. Therefore I won't need the Vista recovery partition on the hard drive. I am trying to eliminate it and add to the C: drive partition. Looking at my drive 0 in disk management I have from Right to left a C: partition 683Gb NTFS with the usual Healthy (System, Boot, Page File, Active, Crash Dump, Primary Partition). Directly to the left is the Recovery or D: drive which is 15Gb NTFS marked Healthy (Primary Partition) and finally to the left is the last partition of 71Mb marked Healthy (EISA Configuration). No idea what that is. Right clicking in the Recovery partition gives several options including: format, shrink volume, extend volume, delete volume, mark volume as active, change drive letter and paths, as well as help.
My question is how to remove the recovery partition and then extend the C: partition. My first thought is to format the recovery partition, delete the volume and then right click the C: drive partition and extend it but I really need some advice so I don't screw up the whole disk. For instance I have no idea what if anything hapens to the drive letters.I think maybe what I am calling partitions are really volumes so you can see I am over my head here.
View 6 Replies
View Related
Mar 31, 2010
If I want to format my HD on vista or remove partitions, what is the procedure? All I have is the back up DVD's that I made. My original HD gave me intermittent problems so I abandoned it. Is there any way to get the recovery program from the original disk onto my new hard drive?
View 8 Replies
View Related
Dec 20, 2009
I have an external hard drive that's divided into 2 partitions. I want to reformat the drive and eliminate the partitions. (Or do I say I want to have only 1 partition?) How do I get rid of the two partitions?
View 6 Replies
View Related
Jun 28, 2008
Is there a disk or a utility that can get me back to put vista back on my machine? What I did was format the C: Drive and installed WinXP as I had probs getting on with Vista but I am finding I am having more problems with WinXP than I did with Vista. Its cracking me up as ZooStorm dont give out disks for windows vista and they dont provide a way of creatig a backup disk, Just the partition.
View 9 Replies
View Related
Mar 26, 2008
Due to a very long and unsuccessful attempt to get Office Enterprise to work properly on a new ACER (VISTA Home Premium) computer that came c/w a pre-installed trial version of Office 2007 as per Office technical support I need to do a clean install of VISTA. My problem is that the only option I have is to re-install the ACER factory load c/w the trial version and all of the other useless stuff. I am contemplating buying either a full or oem version of VISTA Home Premium, Format C, get rid of the hidden partition and start from scratch. What is the difference between oem and full other than the price.. Advice will be appreciated, this is my fourth computer but I have never needed to do anything this drastic before.
View 9 Replies
View Related
Apr 9, 2010
I Have Found A Partition Named PQSERVICE On My Acer Aspire M1641. I Think That This Is The Partition That Restores My Computer To Factory Settings. I Have Changed The HDD And The Partition Is On My Old HDD. Is It Still Recommended To Restore My PC So My Other Data Won`t Be Deleted?
View 6 Replies
View Related
Jun 18, 2008
I recently purchased a HP M9200t with Vista Premium 64 bit. I would like to make the hidden recovery partition, visible. I want to keep it, but I also want to create a folder for updates. How do I make this partition visible? I remember a registry entry mod, but I can't find it. And, it should be for 64 bit Vista.
View 9 Replies
View Related
Jul 26, 2009
I've got a Hp computer that has Vista Home Premium 64 bit on it and I want to remove the partition D which is the recovery partition. I have factory backup dvd's, made my own backup dvd's and have a True Image of the drive with both partitions, so I think I'm covered. Anyone know how to go about removing the complete partition?
View 5 Replies
View Related
Mar 14, 2008
I'm new to Vista x64 (the op sys as well as this site). I have just endeavored to try out Vista 64 bit on one of my workstations. I run VMWare Workstation at work and can use the additional memory addressing of Vista 64 (I have 4 gigs of RAM). nyway, my problem is this.
1) I created another partition on my drive for Vista x64. (two other partitions running Vista x86).
2) I have been running dual boot with Vista for quite a while and it runs fine.
3) After creating the new partition and installing Vista x64 with SP1 (integrated service pack on install DVD), I get drive corruption problems all over the place.
I have 3 500 gigabyte Western Digital drives in this machine. The first is for operating system partitions and the second strictly for backup (using Acronis True Image) and the third for data. The data drive seems to have problems reading when I attempt to install additional drivers for the x64 bit environment (just downloaded from the web). Also, I soon will get errors afterwards on the C drive also.
View 9 Replies
View Related
Mar 24, 2008
To make sure Vista would work with all my hardware and programs, I created a second partition on my XP machine and installed Vista on there (Vista Home Premium). All my hardware and my important programs worked so I thought I'd bite the bullet and upgrade my XP installation on the first partition. That also worked OK (apart from losing all my Music and Videos which I am restoring from backup, at present) and I have used EasyBCD to remove the entry for the copy of Vista on my second partition but I can't seem to delete all the directories and files that are on there. It says I don't have permission to many of them. I also keep Norton Ghost backups on that partition so I don't really want to format it. As I am logged on as an Administrator, why don't I have access to everything? What can I do to allow myself to delete all the Windows files and directories?
View 7 Replies
View Related
Mar 29, 2008
My Disk is split into 2 partitions, Vista (C: ) and Data (E, each is about 70 Gb. I do not use the Data partition. I want to delete it and allow Vista(C to use all 140 Gb. The Help pages suggest that if I delete (or reduce the size of) "Data", the free space becomes unallocated? Can I repartition the disk to allow Vista C: to acces all 140 Gb?
View 9 Replies
View Related
Nov 17, 2009
I have two hard drives ,each hard drive is partitioned into 2.
Drive 1
Partition C:
Partition D:
Drive 2
Partition E:
Partition F:
I have Vista Home Premium on C: Drive. Have Windows 7 on E: Drive. My Boot File is on the C : Drive for both Operating Systems. If I want to remove Vista on Drive 1 , Partition C: First of all what would be the easiest way of removing Vista? Reformat the drive or can you uninstall it with the programs?? If I do Format the C: Drive,I would loose the Boot Manager File. I would probably not be able to even boot into Win 7. If I can not boot into 7 Can I insert the DVD do a repair to bring back the Boot file to C:? Or can I just use a second party Boot Manager like Easy BCD to configure Boot manager??
View 9 Replies
View Related
Jun 12, 2009
On a Lenovo T61 running Vista there is a "hidden" 7 GB partition that is for a recovery operation. The balance of the Hard Disk is C. There is no D. The CD/DVD Reader/Burner is E. Am I able to use the Vista builtin facilities to shrink C to 20GB, and then create and format a second partition (D) on the now free/unallocated area? If so, will this prevent me from doing a recovery as the PC was originally set up for? Are there any hidden traps? Is there a GOOD site/page that describes the operation?
View 4 Replies
View Related
Mar 16, 2009
i want to extend my system partition on Vista, and my friend Bob told me to use EASEUS Partition Master or Partition Magic, but i dont know which one to choose?
View 9 Replies
View Related
Feb 6, 2009
Well for some reason when i wiped my HD clean and tried reinstalling vista home premium i couldnt make a partition until i lowered it to 250 gig. even though when i got it there was 650 gig. So now ive got 400 gig of unallocated space i want to addon to this partition. how would i do that WITHOUT UN installing vista and LOSING my data
View 7 Replies
View Related
Feb 17, 2009
I don't know if this is the place to post this thread so excuse me if this is the wrong group, I saw none that really applied. I'm running Vista SP1 64bit.
I'm looking for a Free Partition program to partition my external hard drive into at least 2 partitions. Does anyone know of such a program that's straight forward without all the bells and whistles? Also, would I set the partitions as Logical or Primary? Currently the drive is a Primary but if I partition it into 2 partitions what should they be?
View 9 Replies
View Related
Mar 13, 2009
My C: drive is 1Tb in size (931.43Gb), with Used Space of 73.8Gb and Free Space of 857.65Gb. I want to shrink the C: partition down to 200Gb, and use this just for my OS and App files - I'm running Vista Ultimate 64 bit. This would then leave me with a new partition of c. 750Gb for my data files and documents etc. However, Vista will only offer to shrink the C: partition by around 260Gb as a maximum. It will not allow me to select a larger size than this. I've tried turning off System Restore / Shadow Copies, but this makes no difference. Any ideas why this should be, and what can I do? p.s. I've tried using Acronis Disk Director as well, but whilst I can select a new C: partition size of 200Gb, when the system reboots, nothing has changed, so ADD won't work either.
View 4 Replies
View Related
May 12, 2008
I have experienced two instances were Add/Remove in Vista does not remove all the software, so that comprehensive installation of similar software is not possible. The first concerned a Scanner, where Add/Remove would not remove all the software, so that installation of the new Scanner is not possible, until a procedure recommended by the Scanner's makers involving modifications to the Registry is carried out, which I could not possibly do myself, so it means hiring a Professional to do the job!
The second concerns Spellex. Here again the old version has not been removed, so that installation of the latest version is not fully carried out, making the software useless. How can Microsoft produce Windows where such problems occur? What is the experience of others in case this is a fault with my computer?
View 8 Replies
View Related
Sep 10, 2009
My laptop's HDD is separated into three partitions. i know which one is my "main" partition and im guessing one is a recovery partition (it says EISA Configuration, whatever that means). But, the other from appearance is just a an ordinary random partition. both of the smaller ones have no name, what are they for? oh and the "EISA" one is 1.46GB and the other is 7.95GB.
Specs:
Toshiba Satellite P-350D S8900
320GB HDD
Windows Vista Home Premium 64 bit
View 7 Replies
View Related
Jun 13, 2009
I split a 300gb HD into 4 partitions and now I dont need 4 partitions I gust wanted two partitions. How do I delete the partitions I dont want and add the space to the other partitions?
View 4 Replies
View Related
Dec 27, 2009
i have a 120gb drive but in hard disc drives it shows 3 drives vista c:, data e: and local disc Q: which is unaccessable can i remove these partitions
View 3 Replies
View Related
Oct 23, 2009
Having two internal hard drives, and an Esata backup drive, gives me 9 partitions [including Recovery] and none of the drive letters are in sequence of make sense. It is very confusing. I asked this forum once if I should set the drive names but was advised to avoid the possible confusion with programs. I originally wanted to keep vista pure on one drive, and everything else in the easily copied data drive. But most programs give you no installation option, and they get "jammed" into C drive. Using the lastest PartitionMagic, do I dare "copymerge" the data partition into the Vista partition [ignoring dups for the moment] and then delete the data partition and that totally useless recovery partition? And have one large drive? [or three, actually]
View 9 Replies
View Related
May 2, 2009
I am trying to boot from one of my Setup Partitions. i am trying to boot from a partition containing Windows Xp 64-bit Install Files and later a partition with Windows 7 Install Files. i have deleted all the Setup Partitions except the Windows Xp one which is being a Bi*ch and won't allow me to delete it.
1. Created ISO Image Windows Xp and downloaded Windows 7 build 7100
2. In Disk Management Shrink 2 Volumes on main HDD with OS (Vista) 1 being Setup Files Shrink to 700MB and OS shrink too 7GB
3. Opened cmd and input diskpart, list volume, select volume y (Setup Xp), active, exit, then xcopy Etc.
when i rebooted i would get a bootmgr missing error and thus using my Windows Vista disc to repair. i have be doing something wrong here as i am still new to this dual booting stuff.
View 9 Replies
View Related
Nov 12, 2007
OK, I've been on this quest for two days now, searching all over the internet. I wonder if ANY body has the answer.
The other day my new computer (Dell Inspiron) came with a 320 gig HDD. Yes, it has the annoying EISA configured partition of 55 MB (EDIT 11/15 just caught mistake, edited from GB to MB) but that's not the big issue.
Another partition is Drive C and allocated with 288 GB and has the OS on it. Only 22.9 GB being used.
The last partition with 10 GB is drive D (recovery).
I want to take a BIG piece out of the C partition and create new partitions.
Using EITHER the Disk Managment tool OR diskpart.exe I am ONLY allowed to shrink C by 128 GB. So after using either, C is 159 GB and the new partition is 128 GB. And many reports around the internet say gparted don't work neither.
I want C to be around 30 GB - 50 GB
Sure I could BUY Partition Magic 8.0 for $70, but this is ONE TIME reallocation. That's a little pricey for a one time shot and I do not support Symantec.
View 9 Replies
View Related
May 31, 2009
After many years of faithful service the CD bootable version of Partition Magic 8.0 has become obsolete when it comes to drives that have been touched Vista 64-bit and Windows 7?! I get the Partition Magic "Error 105" and it quits. In fact, Windows 7 will not install correctly on a Primary partition setup by Partition Magic. Anyway, the partitioning and formatting capability in Vista and Windows 7 gets the job done. I have just one question - how do I set up an extended partition or is that a thing of the
past too?
View 9 Replies
View Related
Sep 6, 2008
so I have a vista partition about 122 gigs more or less and a linux partition which is 30 gigs more or less...I want to merge the linux partition with vista without losing anything on my vista partition. How would I go about doing so? I know I have to format the linux partition thats fine but I do not want to format the vista partition... Or if possible can I give my linux partition 30 more Gigabytes then format it and install another os on it? Again I do not want to format my vista partition.
View 9 Replies
View Related
May 30, 2009
It seems today is my day for asking goofy questions
My windows 7 dual boot OS is the one I use to play all my games now, which by the way, I did not know this would be the case, hence, why I only made it about 40 GBs, leaving the Vista partition the bigger of the two.
Well, it has come time to install, yet, another game but I only have about 5 GBs left and the game needs 10GBs to install. Sure, I could uninstall the other 2 games I have already installed but, I am only half way done with them.
Anyways, I have plenty of space on my Vista partition and I would like to know if Acronis Disk Director is as easy to use as I have read. Aside from this, do I need to be worry about loosing any info (images, documents, etc, etc) on my Vista OS once I start the process or should I stop worrying so much.
View 9 Replies
View Related
Jun 27, 2008
Posted to: microsoft.public.windows.vista.general + microsoft.public.windows.vista.installation_setup Follow-up to: microsoft.public.windows.vista.general
Hello from France. Here is my problem of the day... I just put a new, 160 Go hard disk in my Dell Inspiron laptop. Then, following Dell's instructions as found on a flyer that came with the machine, this is what I did :
1. install Dell's "For Reinstalling Dell Media Direct 3" DVD
2. install Vista
3. finish with "For Reinstalling Dell Media Direct 3"
At stage 2 I choose to have C: at 50 Go, leaving the rest to D: Once Vista was installed, I found that D: had yet to be formatted, which I did. Now, as I take a look at the system, I find that there are in fact 4 volumes: - one is 47 Mo -"Type :" basic -"Statut :" Sound (Configuration EISA) ; this one can't be touched
- second is 2,01 Go - "Type :" basic - "Statut :" Sound (Principal partition) ;
this one can be deleted.......
View 7 Replies
View Related
Mar 25, 2009
Most new computers are shipping without installation CDs. You can make "recovery CDs" with the manufacturers included wizard. Can you do clean installs with these? What are you doing with your recovery partitions? As you start dual-booting Vista and Windows 7 what is the best thing to do with the recovery partition? Is it worth keeping? My recovery partition is to the left of the Vista partition....so can I even use this space without doing a clean install and deleting with the install disk?
View 8 Replies
View Related
