I recently purchased a HP M9200t with Vista Premium 64 bit. I would like to make the hidden recovery partition, visible. I want to keep it, but I also want to create a folder for updates. How do I make this partition visible? I remember a registry entry mod, but I can't find it. And, it should be for 64 bit Vista.
View 9 Replies
I think I messed up my hard drive while trying to erase the EISA partition on it. It's a Gateway P7811-FX laptop with a single 200 GB hard drive. Before, I only had 1 main partition: the C: Drive (176.31 GB), along with the hidden 10 GB EISA partition. After making recovery disks, I followed this tutorial: Delete and Remove to Unlock EISA Hidden Recovery or Diagnostic Partition in Vista » My Digital Life
Following that, I went in Disk Management. The hidden partition showed up, but I couldn't extend the C drive to use the unallocated 10 GB, so I converted it to a simple 10 GB volume. Then I used Acronis Disk Director Suite and merged the two partitions. And now, I can't do anything in Disk Management. There's only one partition now (186.31 GB), but when I right click on it, there's no options to create, shrink, delete, or extend the partition. They were there before, but the only option that shows up is Help.
Under Status, it says Healthy (Active, EISA Configuration). I think I merged the partitions the wrong way, so now there's no "System, Boot, Page File..." partition. Everything is on the EISA partition. When I try to run Acronis, the program doesn't load up. I've tried using Diskpart but I can't create any new partitions either.
On a Lenovo T61 running Vista there is a "hidden" 7 GB partition that is for a recovery operation. The balance of the Hard Disk is C. There is no D. The CD/DVD Reader/Burner is E. Am I able to use the Vista builtin facilities to shrink C to 20GB, and then create and format a second partition (D) on the now free/unallocated area? If so, will this prevent me from doing a recovery as the PC was originally set up for? Are there any hidden traps? Is there a GOOD site/page that describes the operation?
View 4 Replies View RelatedI have just purchased an Acer Aspire 8935g laptop, which comes with Windows Vista Home Premium 32bit (not sure why 64bit isn't supplied). It has two 500gb hard drives; Disk 0 and Disk 1. Disk 1 is empty and I have successfully created 3 partions on this drive. According to Vista's Disk Management tool, Disk 0 contains three partitions. The first and last are both EISA Configuration partitions and can't be seen through Windows Explorer. The 2nd (middle) partition is the C: partition on which Vista is installed.
I want to install Windows 7 RC 64bit in a dual boot configuration, so I used Disk Manager to shrink the C: partition and then create a new 100gb partition. I assigned it the drive letter B: (there are no floppy drives on the laptop). The new B: partition is visible, along with the original C: partition through Windows Explorer, until I reboot the laptop. The B: partition then disappears and Windows Explorer can no longer see it, however Disk Management shows it is still there but it no longer has a drive letter and is now an EISA Configuration partition. I thought this issue might be caused by the choice of drive letter so I tried again using a different letter (F: ). Each time the drive is only visible to Windows Explorer until the laptop is rebooted. I've also tried using a different partition management tool (Partition Wizard) but it makes no difference. I've tried creating the partition as logical and primary but to no avail. explain Why can't I create a visible partition on my "O/S" drive?
Well for some reason when i wiped my HD clean and tried reinstalling vista home premium i couldnt make a partition until i lowered it to 250 gig. even though when i got it there was 650 gig. So now ive got 400 gig of unallocated space i want to addon to this partition. how would i do that WITHOUT UN installing vista and LOSING my data
View 7 Replies View RelatedI recently acquired a Dell Studio XPS 435 desktop with Vista Ultimate as the OS. My plan is to upgrade to Windows 7 in the next couple of months or so. Therefore I won't need the Vista recovery partition on the hard drive. I am trying to eliminate it and add to the C: drive partition. Looking at my drive 0 in disk management I have from Right to left a C: partition 683Gb NTFS with the usual Healthy (System, Boot, Page File, Active, Crash Dump, Primary Partition). Directly to the left is the Recovery or D: drive which is 15Gb NTFS marked Healthy (Primary Partition) and finally to the left is the last partition of 71Mb marked Healthy (EISA Configuration). No idea what that is. Right clicking in the Recovery partition gives several options including: format, shrink volume, extend volume, delete volume, mark volume as active, change drive letter and paths, as well as help.
My question is how to remove the recovery partition and then extend the C: partition. My first thought is to format the recovery partition, delete the volume and then right click the C: drive partition and extend it but I really need some advice so I don't screw up the whole disk. For instance I have no idea what if anything hapens to the drive letters.I think maybe what I am calling partitions are really volumes so you can see I am over my head here.
A customer asked if he created the recovery disc would he still have a complete working recovery partition. He is in fear of creating the disc then losing them.
View 4 Replies View Related4JHA.3676@TK2MSFTNGP06.phx.gbl> A customer asked if he created the recovery disc would he still have a complete working recovery partition. He is in fear of creating the disc then losing them.
View 8 Replies View RelatedIs there a disk or a utility that can get me back to put vista back on my machine? What I did was format the C: Drive and installed WinXP as I had probs getting on with Vista but I am finding I am having more problems with WinXP than I did with Vista. Its cracking me up as ZooStorm dont give out disks for windows vista and they dont provide a way of creatig a backup disk, Just the partition.
View 9 Replies View RelatedDue to a very long and unsuccessful attempt to get Office Enterprise to work properly on a new ACER (VISTA Home Premium) computer that came c/w a pre-installed trial version of Office 2007 as per Office technical support I need to do a clean install of VISTA. My problem is that the only option I have is to re-install the ACER factory load c/w the trial version and all of the other useless stuff. I am contemplating buying either a full or oem version of VISTA Home Premium, Format C, get rid of the hidden partition and start from scratch. What is the difference between oem and full other than the price.. Advice will be appreciated, this is my fourth computer but I have never needed to do anything this drastic before.
View 9 Replies View RelatedI Have Found A Partition Named PQSERVICE On My Acer Aspire M1641. I Think That This Is The Partition That Restores My Computer To Factory Settings. I Have Changed The HDD And The Partition Is On My Old HDD. Is It Still Recommended To Restore My PC So My Other Data Won`t Be Deleted?
View 6 Replies View RelatedRecently replaced an ACER factory load with a clean install of VISTA Home Preimum. My HD has 3 partitions C (228gb), D (227gb), and hidden (9gb). Would like to get rid of the hidden (ACER factory load ). My HD is 500 GB and my total use is 51 GB on C. Would it make sense to create 3 partitions C (small) for Vista and applications, D (small) for data and E (whats left) for whatever. Is it possible / pratical to move the entire User folder to D or would this actually cause more future trouble than it is worth. Can any of this be done with Disk Management (when I right click on the hidden I get no options) or is a third party solution required ? Or should I just leave well enough alone.
View 5 Replies View RelatedI want to create a recovery partition on my windows Vista laptop. Pretty much i want to be pompted when the pc boots to hit f10 and have a count down of 10 seconds. I know this would be done through boot.ini however i have no idea how to do so. Also id make a seperate partition on my hd of ten gigs just for the backup image.
View 6 Replies View RelatedI've got a Hp computer that has Vista Home Premium 64 bit on it and I want to remove the partition D which is the recovery partition. I have factory backup dvd's, made my own backup dvd's and have a True Image of the drive with both partitions, so I think I'm covered. Anyone know how to go about removing the complete partition?
View 5 Replies View RelatedI have just purchased an Acer Aspire 8935g laptop, which comes with Windows Vista Home Premium 32bit (not sure why 64bit isn't supplied). It has two 500gb hard drives; Disk 0 and Disk 1. Disk 1 is empty and I have successfully created 3 partions on this drive. According to Vista's Disk Management tool, Disk 0 contains three partitions. The first and last are both EISA Configuration partitions and can't be seen through Windows Explorer. The 2nd (middle) partition is the C: partition on which Vista is installed.
I want to install Windows 7 RC 64bit in a dual boot configuration, so I used Disk Manager to shrink the C: partition and then create a new 100gb partition. I assigned it the drive letter B: (there are no floppy drives on the laptop). The new B: partition is visible, along with the original C: partition through Windows Explorer, until I reboot the laptop. The B: partition then disappears and Windows Explorer can no longer see it, however Disk Management shows it is still there but it no longer has a drive letter and is now an EISA Configuration partition. I thought this issue might be caused by the choice of drive letter so I tried again using a different letter (F. Each time the drive is only visible to Windows Explorer until the laptop is rebooted. I've also tried using a different partition management tool (Partition Wizard) but it makes no difference. I've tried creating the partition as logical and primary but to no avail.
When I bought my first comp it was XP and prompted me to make recovery disc's the first time I started the thing, But I just bought a new comp with Vista and it didn't propt me to do this when I started it the first time. So the question I have is, How do I make a recovery disc for my Vista comp?
View 4 Replies View Relatedi have linux ubuntu 8.10 and im changing to vista when i boot from dvd and get to choose partition part i click format drive and it sais error 0x8004005. partition needs to be NTFS. how do i make this partition NTFS and format it so i can have vista?
View 6 Replies View Relatedwhich software that make 'recovery disc' for vista home?
View 4 Replies View RelatedMy computer tells me that there is low disk space on my D:Recovery Drive. What and how can i safely remove, and will it improve my performance?
View 9 Replies View Relatedis it possible to create a recovery partition in my vista which will be available in the boot menu? my laptop originaly came with XP so it doesn't have one for vista. I still have the 2Gb partition left from Xp but it's now empty after vista installation. and how much space do i need to resize it for that purpose? i'm also thinking of making another recovery partition for windows 7. so i will have 4 partitions: vista, vista recovery, windows 7, windows 7 recovery. i tried to look in the tutorial section but i didn't find any. i guess it's not common.
View 9 Replies View Related1. Cheaper for the OEM
2. Users regularly delete it and consequently have to pay more money to
Micro$lut to get Windows working again. WPA and WGA serve the same purpose for Micro$lut.
I'd like to reclaim the 10 plus Gb on my SSD that holds the recovery partition for Vista on my Toshiba A500 series laptop.
I've already backed up the system to DVD's using the Toshiba recovery disk creator utility.
Anyone know how to reclaim the 10Gb? I'd really like to do it without losing the operating system if possible.
Also, I'm wondering if I do this and things get screwed up will the recovery disks regenerate the recovery partition and take me back to the original state?
I have a160GB external HD with three partitions. I took it out of a laptop (I was using it to run Windows on that laptop), formatted the 'main' partition (approx. 145GB), and installed Linux on it. The machine I was running Linux in is 'dead' now, so I want to format this 'main' partition again (in Windows), so I can use it for storage or whatever. The problem is that when I plug it into my machine running Vista, it 'sees' the 'recovery' partition (still there from when I was using it in the original laptop), but it doesn't 'see' that 'main' partition (the one I had Linux on). I went into Disk Management, and I can see all three partitions, but when I try to access that 'main' partition,it won't let me do anything with it. Right-clicking the partition brings up my options, but they're all grayed out. I realize that I can't open the partition in Windows, since it has Linux on it, but why can't I format it in Disk Management? I have no way to get into the Linux OS to try to uninstall or format it that way, since the machine is 'dead'.
How can I go ahead and format this partition?
If I use truecrypt to encrypt an entiredrive will it affect the recovery partitions ability to function?
View 9 Replies View Relatedi had company installed vista basic.. and a recovery partition of it.. now once i formatted vista and installed windows 7. for few problems i reverted back to vista. but now tht recovery image is not identified anymore.. is it like now its of no use?? can i do system image restore from recovery partition? i tried browsing and locating.. but no hope.. i will be glad if anyone knows or can tell me a way...
View 9 Replies View RelatedI have a Compaq machine with HP software. My machine is running slow (it has a 2.5 rating) and four files come up missing when it boots. I would like to reinstall VISTA (or preferably XP if I can get a copy). I got the computer from a friend who does not remember what disks, if any, came with it. I have SP1 installed but I do not have a recovery disk or an original installation disk. How would I know if there was a installation or recovery disk? Would I likely get anywhere asking Compaq or HP for help?
View 5 Replies View RelatedAfter having successfully created a set of system recovery discs which can be done only once on brand new HP Pavilion, can I delete the recovery partition to recover some space? Or is there any further use for it? And how do I find it?
View 5 Replies View RelatedHow much recover information is in the Presario's recovery partition, PRESARIO_RP? Is there enough to fully restore the OS or just the most vulnerable parts?
View 7 Replies View RelatedFriend of mine was "given" a free laptop when he bought his Mazda. It came with no discs or a recovery partition. He called and told me he was fiddling with something in settings
View 8 Replies View RelatedI recently had to change my hard drive because the original one got bricked. I was wondering how to make the recovery drive that was on the original HDD.
View 4 Replies View RelatedDell recovery Partition D with factory image.wim copied in drive I
external hard drive. How can i restore my laptop to factory settings
from the factory image in drive I (external hard drive) instead of drive
D (internal Hard Drive)
